summaryrefslogtreecommitdiff
path: root/src/mainboard/tyan
AgeCommit message (Expand)Author
2010-04-14drop quite a lot of dead code that did nothing but produce warnings and makeStefan Reinauer
2010-04-14move cpu/x86/car to cpu/intel/car as previously discussed on the mailing list.Stefan Reinauer
2010-04-09zero warning days.Stefan Reinauer
2010-04-09zero warnings days.Stefan Reinauer
2010-04-09copy_and_run.c is not needed twice, and it is used on non-car too.Stefan Reinauer
2010-04-09Copy acpi blobs in two parts to make sure gcc does the right thing.Myles Watson
2010-04-08Clean up fidvid files using indent.Myles Watson
2010-04-08Replace dual_core and quad_core CMOS (nvram) options with multi_core. Fix so...Myles Watson
2010-04-07move amd K8/Fam10 "bus detection" function prototypes to a common place.Stefan Reinauer
2010-04-07switch some ROMCC boards back to ROMCC.Stefan Reinauer
2010-04-07- unify use of SB_HT_CHAIN_UNITID_OFFSET_ONLYStefan Reinauer
2010-04-06No warnings day, next round.Stefan Reinauer
2010-04-03remove more warningsStefan Reinauer
2010-04-01- get rid of ASM_CONSOLE_LOGLEVEL except in two assembler files.Stefan Reinauer
2010-03-31Drop \r\n and \n\r as both print_XXX and printk now do this internally.Stefan Reinauer
2010-03-31This patch drops arch/i386/lib/console.c and arch/i386/lib/console_print.c andStefan Reinauer
2010-03-30- drop unneeded Makefile.incStefan Reinauer
2010-03-30drop USE_INIT from mainboard Kconfig files, it's already set in src/KconfigStefan Reinauer
2010-03-30unify cmos.layout wrt AMD extended configuration registers.Stefan Reinauer
2010-03-29This drops the ASSEMBLY define from romstage.c, tooStefan Reinauer
2010-03-29__PRE_RAM__ is now correctly specified in the Makefile. No need to hack it intoStefan Reinauer
2010-03-29This patch drops the coreboot CMOS checksum ranges from Kconfig becauseStefan Reinauer
2010-03-29dualcore.h and quadcore.h are almost exactly the same. Stefan Reinauer
2010-03-28drop unneeded __ROMCC__ checks when the check for __PRE_RAM__ is moreStefan Reinauer
2010-03-24Get rid of type-punned pointer errors.Myles Watson
2010-03-22Fix all the format string warnings.Myles Watson
2010-03-22printk_foo -> printk(BIOS_FOO, ...)Stefan Reinauer
2010-03-19Get rid of a few warnings:Myles Watson
2010-03-18Remove remaining uses ofPatrick Georgi
2010-03-18Rework boolean expression (DeMorgan and all) forPatrick Georgi
2010-03-18Remove fallback/normal handling in mainboards'Patrick Georgi
2010-03-17Remove failover/fallback/normal handling in mainboards'Patrick Georgi
2010-03-17remove more warnings, and fix some boards (watchdog.h)Stefan Reinauer
2010-03-13Use CPU_INTEL_SLOT_1 for Slot 1 boards (trivial).Uwe Hermann
2010-03-11Replace clear_memory with memset.Myles Watson
2010-03-08Remove Kconfig entries that disablePatrick Georgi
2010-03-08Set options to make AMD CAR code compile correctly,Arne Georg Gleditsch
2010-03-01Whitespace changes to make s2912_fam10/ms9652_fam10 more similar.Uwe Hermann
2010-03-01- Add rules that build either 4 or 5 ssdts (only those variants exist in the ...Patrick Georgi
2010-02-28- Add config flag for boards that have their own fadt.cPatrick Georgi
2010-02-27- make HAVE_HARD_RESET match what newconfig didPatrick Georgi
2010-02-27This does the following:Stefan Reinauer
2010-02-25Move the ldscripts logic to src/arch/i386/Makefile.incPatrick Georgi
2010-02-25Unify crt0s setup to src/arch/i386/Makefile.inc. This variablePatrick Georgi
2010-02-23Only handle code as "driver" that actually uses our driverPatrick Georgi
2010-02-15Various license header consistency fixes (trivial).Uwe Hermann
2010-02-11$(DISTRO_CFLAGS) is newconfig heritage and was never used on Kconfig. We doStefan Reinauer
2010-02-09Move all the copies of the romstage.inc rule toPatrick Georgi
2010-02-08Clean up ACPI:Patrick Georgi
2010-02-08straighten naming scheme for application processor rom stage files.Stefan Reinauer
2010-02-08janitor task: unify and cleanup naming.Stefan Reinauer
2010-02-07newconfig is no more.Patrick Georgi
2010-02-04Revision 5051 broke Kconfig booting for the Tyan s2881 board. Up to 5050, thereWard Vandewege
2010-02-03Fix incorrect board names in Kconfig strings (trivial).Uwe Hermann
2010-01-30ifeq wants a space before the (Stefan Reinauer
2010-01-30* fix crt0s/ldscripts paths to fix out of tree build.Stefan Reinauer
2010-01-25More Kconfig changes to improve match with newconfig:Patrick Georgi
2010-01-25Align several kconfig options to match newconfig:Patrick Georgi
2010-01-18Move all IOAPIC selection to southbridges, and remove themPatrick Georgi
2010-01-18get rid of Kconfig warning.Stefan Reinauer
2010-01-06Kconfig builds all boards now.Patrick Georgi
2010-01-05* Explicitly add __PRE_RAM__ where it should be added.Stefan Reinauer
2009-12-02Trivial fixes for kconfig. They fix all non-fam10 build failures.Myles Watson
2009-11-27Eliminate special case id.inc/id.lds in favor of a configuration variable ID_...Patrick Georgi
2009-11-27Really hook up s2850 and s2875. Trivial.Patrick Georgi
2009-11-27Make newconfig and kconfig agree on MAINBOARD_PCI_SUBSYSTEM_{VENDOR,DEVICE}_IDPatrick Georgi
2009-11-06Remove drivers/pci/onboard. The only purpose was for option ROMs, which areMyles Watson
2009-11-06Drop all pre-CBFS rom_address entries in Config.lb/devicetree.cb.Uwe Hermann
2009-11-06Split the two usages of __ROMCC__:Myles Watson
2009-10-28Fix some builds with Kconfig.Myles Watson
2009-10-26cp src/mainboard/tyan/Makefile.k8_CAR.inc to src/mainboard/Makefile.k8_ck804.incMyles Watson
2009-10-26Move src/mainboard/tyan/Makefile.s289x.inc to src/mainboard/Makefile.k8_CAR.inc.Myles Watson
2009-10-26Define some variables that were not defined. There are a couple left.Myles Watson
2009-10-24Major cleanups of the hard_reset() code and config in coreboot.- supermicro/x6dhe_g/auto.c
2009-10-24move all register fram definitions to arch/register.hStefan Reinauer
2009-10-23Drop dead K8_SCAN_PCI_BUS code. It's a bad idea to scan the PCI busses beforeMyles Watson
2009-10-20Remove CONFIG_CPU_AMD_FAM10 & CONFIG_CPU_AMDK8 from mainboards. They should beMyles Watson
2009-10-20Fix all board names in Kconfig as per wiki / vendor website.Uwe Hermann
2009-10-19Unselect AP_CODE_IN_CAR in tyan/s289x. Trivial.Myles Watson
2009-10-18Simplify Kconfig files by using "select" where possible (trivial).Uwe Hermann
2009-10-17Move files from src/cpu/x86/{fpu,mmx,sse}/ to x86/Peter Stuge
2009-10-17Remove CONFIG_ from #defines that aren't config variables. Trivial.Myles Watson
2009-10-16Fix AP_CODE_IN_CAR (only selected for two boards), STACK_SIZE, and HEAP_SIZE.Myles Watson
2009-10-16Drop enable_mmx.inc. It reads (only) "Enabling mmx registers is a noop"Peter Stuge
2009-10-16Set default ROM sizes per-board to match the ROM chip that cameUwe Hermann
2009-10-16Change CONFIG_LB_MEM_TOPK to CONFIG_RAMTOP to match CONFIG_RAMBASE.Myles Watson
2009-10-16Fix IRQ9 and allow ACPI without an MP table for Tyan s289x.Myles Watson
2009-10-15Add CONFIG_GENERATE_* for tables so that the user can select which tables notMyles Watson
2009-10-14White space and typo fixes. This makes it easier to compare the s2895 & s2892.Myles Watson
2009-10-14Use CAR ck804 code with the s2892.Myles Watson
2009-10-13White space change in preparation for a patch to unify handling of ck804.Myles Watson
2009-10-13Revert some garbage that snuck into my trivial change, correct a spelling error.Myles Watson
2009-10-13Remove a couple more warnings. Trivial.Myles Watson
2009-10-13Fix obvious typos (trivial).Uwe Hermann
2009-10-11HAVE_ACPI_TABLES cleanups for kconfig:Uwe Hermann
2009-10-09Add const to get rid of some warnings when passing quoted strings.Myles Watson
2009-10-08Kconfig: AMD Fam10, all Tyan boards.Patrick Georgi
2009-10-07Major CONFIG_IRQ_TABLE_COUNT fixing and cleanups. Some of these boardsUwe Hermann
2009-10-07Convert all "default y" options to "select FOO" (shorter).Uwe Hermann
2009-10-06UseUwe Hermann