summaryrefslogtreecommitdiff
path: root/src/mainboard/tyan
AgeCommit message (Expand)Author
2009-10-26cp src/mainboard/tyan/Makefile.k8_CAR.inc to src/mainboard/Makefile.k8_ck804.incMyles Watson
2009-10-26Move src/mainboard/tyan/Makefile.s289x.inc to src/mainboard/Makefile.k8_CAR.inc.Myles Watson
2009-10-26Define some variables that were not defined. There are a couple left.Myles Watson
2009-10-24Major cleanups of the hard_reset() code and config in coreboot.- supermicro/x6dhe_g/auto.c
2009-10-24move all register fram definitions to arch/register.hStefan Reinauer
2009-10-23Drop dead K8_SCAN_PCI_BUS code. It's a bad idea to scan the PCI busses beforeMyles Watson
2009-10-20Remove CONFIG_CPU_AMD_FAM10 & CONFIG_CPU_AMDK8 from mainboards. They should beMyles Watson
2009-10-20Fix all board names in Kconfig as per wiki / vendor website.Uwe Hermann
2009-10-19Unselect AP_CODE_IN_CAR in tyan/s289x. Trivial.Myles Watson
2009-10-18Simplify Kconfig files by using "select" where possible (trivial).Uwe Hermann
2009-10-17Move files from src/cpu/x86/{fpu,mmx,sse}/ to x86/Peter Stuge
2009-10-17Remove CONFIG_ from #defines that aren't config variables. Trivial.Myles Watson
2009-10-16Fix AP_CODE_IN_CAR (only selected for two boards), STACK_SIZE, and HEAP_SIZE.Myles Watson
2009-10-16Drop enable_mmx.inc. It reads (only) "Enabling mmx registers is a noop"Peter Stuge
2009-10-16Set default ROM sizes per-board to match the ROM chip that cameUwe Hermann
2009-10-16Change CONFIG_LB_MEM_TOPK to CONFIG_RAMTOP to match CONFIG_RAMBASE.Myles Watson
2009-10-16Fix IRQ9 and allow ACPI without an MP table for Tyan s289x.Myles Watson
2009-10-15Add CONFIG_GENERATE_* for tables so that the user can select which tables notMyles Watson
2009-10-14White space and typo fixes. This makes it easier to compare the s2895 & s2892.Myles Watson
2009-10-14Use CAR ck804 code with the s2892.Myles Watson
2009-10-13White space change in preparation for a patch to unify handling of ck804.Myles Watson
2009-10-13Revert some garbage that snuck into my trivial change, correct a spelling error.Myles Watson
2009-10-13Remove a couple more warnings. Trivial.Myles Watson
2009-10-13Fix obvious typos (trivial).Uwe Hermann
2009-10-11HAVE_ACPI_TABLES cleanups for kconfig:Uwe Hermann
2009-10-09Add const to get rid of some warnings when passing quoted strings.Myles Watson
2009-10-08Kconfig: AMD Fam10, all Tyan boards.Patrick Georgi
2009-10-07Major CONFIG_IRQ_TABLE_COUNT fixing and cleanups. Some of these boardsUwe Hermann
2009-10-07Convert all "default y" options to "select FOO" (shorter).Uwe Hermann
2009-10-06UseUwe Hermann
2009-10-06Various fixes to Kconfig: All kconfig-boards should have aPatrick Georgi
2009-10-06Remove duplicate device trees for Tyan s289x. Remove pre-CBFS statements.Myles Watson
2009-10-05PCI_ROM_RUN and CONSOLE_VGA are global options in Kconfig andUwe Hermann
2009-10-04The new CBFS based build system requires the whole ROM to be accessibleUwe Hermann
2009-10-04This does away with CONFIG_ROM_PAYLOAD_START and CONFIG_PAYLOAD_SIZE.Patrick Georgi
2009-10-03Move HAVE_FAILOVER_BOOT and USE_FAILOVER_IMAGE fromPatrick Georgi
2009-10-03Remove:Patrick Georgi
2009-10-03Remove duplicate and not too useful Kconfig board comments asUwe Hermann
2009-09-29Fix a number of board names in Kconfig (trivial).Uwe Hermann
2009-09-29Remove MAINBOARD_OPTIONS, which is a relic from earlyPatrick Georgi
2009-09-25some progress on kconfig:Patrick Georgi
2009-09-23simplify source tree hierarchy: move files from sdram/ and ram/ to lib/Stefan Reinauer
2009-09-23Add Kconfig support for Tyan s2881.Myles Watson
2009-09-22src/Kconfig: Remove HT-specific options.Myles Watson
2009-09-22failoverR.diff: Revert my failover change since Kconfig only supports fallback.Myles Watson
2009-08-26Add kconfig support for all missing Intel 440BX based boards.Uwe Hermann
2009-08-19Reduce size of the romstage on various boards that fail to build on QA.Patrick Georgi
2009-08-12Kconfig!Patrick Georgi
2009-08-11Enable CBFS everywhere. All boards compiled for me (abuild tested),Patrick Georgi
2009-07-21This fixes a couple of issues with older Linux kernels (that expect an XSDT asStefan Reinauer
2009-07-16Separate cache_as_ram_auto.c and failover.c for Tyan s2895.Myles Watson
2009-06-30the tool chain settings should not be in renamed (as they will never live inStefan Reinauer
2009-06-30This patch unifies the use of config options in v2 to all start with CONFIG_Stefan Reinauer
2009-06-19Undo my ugly commit that added uses clauses in lots of places instead of one.Myles Watson
2009-06-17Fix configuration of boards that didn't have uses CONFIG_USE_INIT. Trivial.Myles Watson
2009-06-11Fix s2895 failover booting.Myles Watson
2009-06-06When I started refactoring mainboard Config.lb, I added two differentCarl-Daniel Hailfinger
2009-06-03Revert "CMOS: Add set_option and rework get_option."Luc Verhaegen
2009-06-03CMOS: Add set_option and rework get_option.Luc Verhaegen
2009-05-26Various fixes to the tree to get coreboot-v2 to build on SolarisPatrick Georgi
2009-05-14Update equivalent processor revision ID to load latest microcode patches andMarc Jones
2009-05-01Trivial patch to make #defines generated from cmos.layout have unique names. ...Myles Watson
2009-04-30Remove warnings from compilation of the s2892 with and without CBFS.Myles Watson
2009-04-30Trivial fix for tyan/s2735: a newly used option wasn't defined as "used"Patrick Georgi
2009-04-30Add "printk" support to all CAR targetsStefan Reinauer
2009-04-30Refactor copy_and_run so that it uses a single code base instead ofPatrick Georgi
2009-04-28Enable HAVE_HIGH_TABLES by default for northbridges withPatrick Georgi
2009-04-28add_mainboard_resources is necessary for some boards (eg. kontron), butPatrick Georgi
2009-04-22drop duplicate compiler options that are already mentioned in CFLAGS.Stefan Reinauer
2009-04-22This patch unifies the socket_mPGA604_800Mhz and socket_mPGA604_533Mhz to aStefan Reinauer
2009-04-21Thanks to Myles' patch adding support for include statements,Carl-Daniel Hailfinger
2009-04-14v2/src romfs->cbfs renamePeter Stuge
2009-04-13I need to do uses HAVE_ACPI_RESUME for each board. Here we go.Rudolf Marek
2009-04-12This patch cleans up the calls to $CC in mainboard Config.lb files. TheyCarl-Daniel Hailfinger
2009-04-11Bring S2912 and S2912_Fam10 Config.lb in line with each other.Carl-Daniel Hailfinger
2009-04-11Kill remaining unneeded CAR/ROMCC if-blocks.Carl-Daniel Hailfinger
2009-04-03Fix up the incomplete commit in r4055.Carl-Daniel Hailfinger
2009-04-03There are more than a dozen targets in the v2 tree which refer to ROMCCCarl-Daniel Hailfinger
2009-04-03Next step. Kill auto.c and failover.c and clean up Config.lb forCarl-Daniel Hailfinger
2009-04-03There are more than a dozen targets in the v2 tree which refer to ROMCCCarl-Daniel Hailfinger
2009-04-01Drop CONFIG_CHIP_NAME. Those config statements in Config.lb shouldStefan Reinauer
2009-03-31Add the CONFIG_ROMS config variable. Ronald G. Minnich
2009-03-13This patch reverts SuperIO changes that I was too hasty with. Even though theMyles Watson
2009-03-13This, ladies and gentlement, is commit #4000.Stefan Reinauer
2009-03-10This patch adds ACPI support for Tyan s2891, s2892, and s2895. There is stillMyles Watson
2009-02-28coreboot-v2: drop this ugly historic union name in v2 that was dropped in v3Stefan Reinauer
2009-02-18Carl-Daniel's part:Carl-Daniel Hailfinger
2009-02-09Remove some warnings, mainly from format strings which didn't match theMyles Watson
2009-01-20This patch makes the recently added assembler debug optional, as it mayStefan Reinauer
2008-12-22Fix implicit declarations of get_bus_conf.Carl-Daniel Hailfinger
2008-12-22In the process of trying to debug some HT sync problems I added lots ofCarl-Daniel Hailfinger
2008-12-10Use -O2 and -mcpu=p2 as romcc options for all Intel 440BX boards.Uwe Hermann
2008-11-28This patch from Ralf Grosse Boerger makes debugging more comfortable. Stefan Reinauer
2008-11-27Remove the unnecessary memctrl[] indirection, 440BX only has oneUwe Hermann
2008-11-20OK, people, watch this.Stefan Reinauer
2008-10-30Here's a patch towards r3690 upping the ROM size for the S2912 Fam10 target t...Arne Georg Gleditsch
2008-10-13Drop unused (or commented / #if 0) reset.c files.Uwe Hermann
2008-10-12Drop tons of duplicated debug.c files, move common file toUwe Hermann
2008-10-10Enable vga bios by default on Tyan s2881. The board has an onboard ati rage XL.Ward Vandewege
2008-10-06Whitespace fixes.Myles Watson