summaryrefslogtreecommitdiff
path: root/src/mainboard/tyan
AgeCommit message (Collapse)Author
2015-03-21mainboards/amd/fam10: Add romstage timestampsTimothy Pearson
Example output: 1:start of rom stage 542 2:before ram initialization 193,989 (193,447) 3:after ram initialization 3,319,114 (3,125,124) 4:end of romstage 3,320,004 (889) Change-Id: Idcde7dc4c7a1d6c3118c82b67e8c2fcd4a07553b Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8776 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-03-19cpu/amd/model_10xxx: Add support for early cbmemTimothy Pearson
mainboards/amd/fam10: Initialize cbmem area after raminit When GFXUMA is enabled, CBMEM is placed at TOM - UMASIZE When GFXUMA is disabled, CBMEM is placed at TOM This matches the behaviour present before conversion to early CBMEM. The CBMEM location code implicitly assumes TOM does not change between romstage and ramstage. TOM is set by romstage raminit, and is never changed by romstage or ramstage afterward. As the CBMEM location is positioned at a specific offset from TOM that is known to both romstage and ramstage early CBMEM is safe on Fam10h systems. TEST: Booted ASUS KFSN4-DRE and verified both cbmem timestamp tables from romstage and cbmem log tables from ramstage. Change-Id: Idf9e0245fe91185696ff664b06182c26b376c196 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8489 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2015-03-16mainboards/amd: Fix incorrect reboot_bits locationTimothy Pearson
Change-Id: Iead07df714f4f1bbaae6b564431fb4edf7b18ac2 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8684 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-03-09AMD fam10: Always have AMDMCTKyösti Mälkki
Also drop some more #if UNUSED_CODE. Change-Id: I1bbe96a65c9240636ff7cfaf70c2ecbfb3aee715 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8551 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-07AGESA: Use same HeapManager for all BiosCallOutsKyösti Mälkki
We do not allow platforms to mess around with memory layout. Change-Id: I316ff522c8833fa3b7ad20f2c5a9cae21f4174d8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8604 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-03-05mainboard: Do not redefine DRIVERS_PS2_KEYBOARD Kconfig variableAlexandru Gagniuc
Change-Id: Icc603dfe92360d978221a25ad28517da43942bea Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/8498 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-16mainboard/cmos: Kill off unused boot_* parametersTimothy Pearson
Change-Id: I19d6b56e3ac5e6e7946648b97c86a223b748e3bd Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8460 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-16mainboard/cmos: Move ECC variables out of fallback mechanism byteTimothy Pearson
Change-Id: Icebc12d8f83494150a7bdd3adcc168d7b48b2e68 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8458 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-16mainboard/cmos: Delete obsolete commented parametersTimothy Pearson
Change-Id: Iccad79c142a7fcf89dd0fbebe8c07ad9ef019e91 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8459 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2015-02-16mainboard/amd/amdfam10: Update AMD K10 socket F NVRAM layout filesTimothy Pearson
This removes spurious K8 options and adds appropriate K10 options. File content taken from the functional K10 ASUS KFSN4-DRE board. Change-Id: I237bb139056f39f21416268cb52d24c5bc5f111d Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8456 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-15x86: Change MMIO addr in readN(addr)/writeN(addr, val) to pointerKevin Paul Herbert
On x86, change the type of the address parameter in read8()/read16/read32()/write8()/write16()/write32() to be a pointer, instead of unsigned long. Change-Id: Ic26dd8a72d82828b69be3c04944710681b7bd330 Signed-off-by: Kevin Paul Herbert <kph@meraki.net> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/7784 Tested-by: build bot (Jenkins)
2015-02-14AGESA fam10 fam12 fam15: Always have HT3_SUPPORTKyösti Mälkki
Keep the slower HyperTransport configuration for a possible reference in fam15 boards. Change-Id: Ifcdedc6385fec80f7d02c55c2aac10e5e2429a18 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8344 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-12AMD K8 boards’ `romstage.c`: Spell sync*hr*onize correctlyPaul Menzel
Change-Id: I92e6e7f1292f66642aa0336064a4eccba104dd08 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/5101 Reviewed-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2015-02-03amd/model_10xxx: Drop AMD_UCODE_PATCH_FILE selectionKyösti Mälkki
Include microcode updates in CBFS for every CPU revision the platform can support, as changing to different CPU revision should not require a coreboot rebuild. This increases CBFS usage from 2 kB to 14 kB. Change-Id: I6bf90221a688f1a54e49641ce3ba378c5bf659f9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4521 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
2015-01-15mainboard/tyan/s2882/irq_tables.c: Remove dead code under #if 0Edward O'Callaghan
Silence unused variable warning. Change-Id: I2671e0843a60e5bd857b233a45ea68715461f187 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/8202 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-01-06mainboard: Drop print_ implementation from non-romcc boardsStefan Reinauer
Because we had no stack on romcc boards, we had a separate, not as powerful clone of printk: print_*. Back in the day, like more than half a decade ago, we migrated a lot of boards to printk, but we never cleaned up the existing code to be consistent. instead, we worked around the problem with a very messy console.h (nowadays the mess is hidden in romstage_console.c and early_print.h) This patch cleans up the mainboard code to use printk() on all non-ROMCC boards. Change-Id: I2383f24343fc2041fef4af65d717d754ad58425e Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/8111 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2015-01-06AMD platforms: fix callout_entry doxygen errorsMartin Roth
Somewhere along the line, the sb_cfg parameter name was changed to config, but this wasn't carried into the documentation or the function prototypes everywhere. Change-Id: Iccb0829c2f50370dddb70af915a6759316c4727a Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/8098 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2015-01-06AMD Mainboards - rd890_cfg.h: fix Doxygen errors.Martin Roth
Doxygen gives an error when processing #defines inside doxygen comments. Normal comments are ignored. The choice for this fix was to make this a standard comment starting with '/*' instead of '/**', or to make the comment not a #define. Change-Id: I97fbbcea6f045d80ec7c0ab5e196d57e5da16d86 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/8099 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2015-01-06AMD Mainboards - rd890_cfg.c: Fix doxygen warningsMartin Roth
Remove variable types from the param declaration. Change-Id: Ia6a3d36fcf01d7a52bb1a31cfdb47d88bf612d79 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/8097 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2015-01-06Remove AMD's "Release Content" doxygen from coreboot filesMartin Roth
These comments are left over and are not relevent in the coreboot code, but created a new section titled "Release Content" in the doxygen documentation produced by the coreboot code. In an effort to clean up the output, I'm removing these doxygen comments. Change-Id: I4d7be3313a2ab6c140b4f3afe70dffc4abba7bca Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/8069 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-01-06mainboard/*/romstage.c: Fix 'lib/delay.c' inclusionEdward O'Callaghan
Use 'delay.h' header rather than directly including 'delay.c' source. N.B. Some amdfam10 and K8 boards are not included in this changeset since unrelated issues are woven in there. Change-Id: Ibc0c0e560d8eedaf5c3150f95ba72fe5dd8d6f3a Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/8086 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-01-06mainboard/*/romstage.c: Sanitize system header inclusionsEdward O'Callaghan
Fix system include paths to be consistent. Chipset support is part of the Coreboot 'system' and hence 'non-local' (i.e., in the same directory or context). One possible product of this, is to perhaps allow future work to do pre-compiled headers (PCH) on the buildbot for faster build times. However, this currently just makes mainboard's consistent. Change-Id: I2f3fd8a3d7864926461c960ca619bff635d7dea5 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/8085 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-01-04AMD Mainboards - romstage.c: Fix doxygen errorsMartin Roth
- Remove types from the param declarations. - list needed to be uppercase. Change-Id: I8b9ed78908e5d3e1d99e7ba2ea9013be109b8e27 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/8072 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2015-01-04superio/smsc/lpc47b397: Use link-time symbols over .c inclusionEdward O'Callaghan
Change-Id: I344f2a8d2ae5f6f3fa04d79773ee1c59de69e425 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/8079 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-12-20AGESA: Add OemCustomize hooks structureKyösti Mälkki
We should potentially provide an OEM platform hook to manipulate parameters around any entry point to AGESA. Use structure for such ops to avoid weak functions and lots of empty function stubs. Change-Id: I99bf7de8a1e2f183399d2216520a45d0c24fd64c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7824 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-20AGESA: Add amd_initcpuio() and amd_initmmio()Kyösti Mälkki
These are not wrappers for AGESA as they do not enter vendorcode at all. We expect most of the added fixme.c file to be written without use of AMDLIB.h and parts relocated as northbridge enable_resources(). Change-Id: Iba6d59e2a7672349208e9a65fcd2cb1094ab7d50 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7815 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-19mainboard: Strip out some dead includesEdward O'Callaghan
Change-Id: I0079fa089ba863c6e447bcee3440a7e0ba0f2372 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7429 Reviewed-by: Marc Jones <marc.jones@se-eng.com> Tested-by: build bot (Jenkins)
2014-12-13AMD AGESA boards: Prevent passing duplicate obj names to arScott Duplichan
For some of the boards using AMD processors, the Agesa Makefile.inc is processed twice, causing the list of obj files passed to the ar command to be added twice. This does not break the build, but does make the ar command line unnecessarily long. Change-Id: I02a7e6fc617e337ca2e2dceeff3d4db9995bfe16 Signed-off-by: Scott Duplichan <scott@notabs.org> Reviewed-on: http://review.coreboot.org/7787 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-12-08mainboard: Fix correct index variable usage in double loop constructEdward O'Callaghan
Change-Id: I672c532c3f7179038d41f269bba434b8703e254b Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Found-by: Clang Reviewed-on: http://review.coreboot.org/7718 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-12-03AGESA: Trace execution with AGESA_EVENTLOG()Kyösti Mälkki
Change-Id: I5601ed92ca808603b0a9edad118ca54aa168aceb Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7604 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-03AGESA fam15: Common agesawrapperKyösti Mälkki
Place empty OemCustomizeInitEarly() and OemCustomInitPost() in a common file for now and split eventlog parser to a separate file. Change-Id: Ia8277ad13a800898b3e1a4e9c8fbd838ae2efeae Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7155 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-03AGESA fam15: Move LPC decode enable for serial portKyösti Mälkki
Move LPC decode enable out of agesawrapper.c. It should not be on the execution path of AP CPUs and function is not related to AGESA per se. Change-Id: I19c6a9c7d71c9899fdc898c09c337d747424fcec Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7601 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-03AGESA: Report events with AGESA_EVENTLOG()Kyösti Mälkki
NOTE: For fam12 and fam14 ASSERT() is defined empty so execution may fall through critical failures. Change-Id: Ifef65d749d340f1df3a43b5fcb38c4315ef944e8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7154 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-03AGESA: Use common header for agesawrapperKyösti Mälkki
Change-Id: I5189d0c55635aeb29553fd04a67490cfee3d88d5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7153 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-02Replace hlt with halt()Patrick Georgi
There were instances of unneeded arch/hlt.h includes, various hlt() calls that weren't supposed to exit (but might have) and various forms of endless loops around hlt() calls. All these are sorted out now: unnecessary includes are dropped, hlt() is uniformly replaced with halt() (except in assembly, obviously). Change-Id: I3d38fed6e8d67a28fdeb17be803d8c4b62d383c5 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/7608 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-11-26agesa/family15: Switch to per-device ACPIVladimir Serbinenko
Change-Id: I3847eb1524a5a816cd4885a31d703b410804c1f0 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7032 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-11-20vendorcode/amd/agesa/f*/Porting.h: Sync files across fam'sEdward O'Callaghan
Sync up these 'Porting.h' headers to include fixes from each family on botched-up typedef's for primitive data types. Fix corresponding breakage introduced by typecasts in mainboards. Change-Id: I003b155cc6c860f6b0cd75667083634a04814473 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7512 Tested-by: build bot (Jenkins)
2014-11-14AMD: Move RAMBASE and RAMTOPKyösti Mälkki
There are no reasons to not load ramstage @ 0x100000. Boards with HAVE_ACPI_RESUME enabled have performance penalty in using excessive RAMTOP. For these boards, this change releases 11 MiB of RAM from CBMEM allocation to OS. Change-Id: Ib71995aba5e9332d0ec1626b3eb3b4ef6a506d1c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7094 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-07mainboard: Trivial - Make AGESA board include consistentEdward O'Callaghan
Change-Id: If6cb99469f56fff8f88b294b625f0a5205ec540b Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7238 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-10-22AGESA boards: Fix early agesawrapper_amdinitmmio()Kyösti Mälkki
Regression introduced with commit 7b23ae0 AGESA: Trace execution with AGESAWRAPPER() As the call is made before console_init() is called it must not call any printk(). Debugging Olivehill and Parmer platforms using a custom FPGA (as these boards have no Super-IO UART) have been observed to halt and/or delay at early boot. Change-Id: I3ab4e5378db44aece9046c8636cde1053ce5390d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7059 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins) Reviewed-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
2014-10-19amd: rename model_fxx_powernow to powernow.Vladimir Serbinenko
Change-Id: Iee581183f9cd9f5fecd5604536b735f6a04a0f93 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7019 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2014-10-19AGESA: Drop board and chipset -specific callout headersKyösti Mälkki
Change-Id: If973f28931e65a57cbb8d6739542a57c844f0d66 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7115 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-10-19AGESA fam12 fam14 fam15: Use common agesa_readSpd()Kyösti Mälkki
Remove northbridge specific callouts for AGESA_READ_SPD. Move low-level SMBus code to southbridge. Change-Id: I5fc91c49d9ef8e0af1c4d8194f857c61ce417d1d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7113 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-10-16amdk8: Move to per-device ACPIVladimir Serbinenko
Change-Id: I485791015aa7eaabba53813945c216f5725554b1 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6948 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-08-15intel/cpu: rename car.h to romstage.hAaron Durbin
This header has nothing to do with cache-as-ram. Therefore, 'car' is the wrong term to use. It is about providing a prototype for *romstage*. Change-Id: Ibc5bc6f3c38e74d6337c12f246846853ceae4743 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/6661 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-08-14Intel: Add common header file for CAR setupEdward O'Callaghan
When passing '-ffreestanding' the 'main' romstage.c may no longer necessarily be considered the entry point. From the C specification in 5.1.2.1 Freestanding environment; "In a freestanding environment (in which C program execution may take place without any benefit of an operating system), the name and type of the function called at program startup are implementation-defined." Clang complains about these being missing as Clang is somewhat more strict about the spec than GNU/GCC is. An advantage here is that a different entry-point type-signature shall now be warned about at compile time. Change-Id: I467001adabd47958c30c9a15e3248e42ed1151f3 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5872 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-08-12Kconfig: do not set SB_HT_CHAIN_ON_BUS0 twice to the same valueDaniele Forsi
Change-Id: If7286abf91f758cfbac2c85dcad336f38f70d843 Signed-off-by: Daniele Forsi <dforsi@gmail.com> Reviewed-on: http://review.coreboot.org/6579 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2014-08-06mainboard/amd: De-ASCIIartify AGESA board headersEdward O'Callaghan
As was done for the reference boards in: cd30951 mainboard/amd: De-ASCIIartify reference boards Change-Id: Ie34aa5269388b771daa6934f8aff0314ac6778d5 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6290 Tested-by: build bot (Jenkins) Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
2014-07-28AGESA boards: Drop get_bus_conf.c filesKyösti Mälkki
The only remaining purpose for get_bus_conf() was to fill in obscure bus_sb800 (etc.) arrays containing partial PCI bus enumeration. Complete enumeration is available in devicetree and PCI configuration space so discard these arrays. Change-Id: I733115940afba3a50c58aedb9a04ecf5082b1234 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6360 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-28AGESA boards: Use devicetree for PCI bus enumerationKyösti Mälkki
Previously MP table contained PCI_INT entries for PCI bus behind bridge 0:14.4 even if said PCI bridge function was disabled. Remove these as invalid, indeterminate bus number could cause conflicts. PCI_INT entries with bus_sb800[2], bus_hudson[2] and bus_yangtze[2] were invalid as there is no PCI bridge hardware on device 0:14.0. Remove these as invalid, indeterminate bus number could cause conflicts. Change-Id: Ie6a3807f64c8651cf9f732612e1aa7f376a3134f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6358 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-28AGESA: Drop some excessive agesawrapper.h includesKyösti Mälkki
Change-Id: I3807912b1dc68fae8248a66e37bbe642fb92d3ae Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6262 Tested-by: build bot (Jenkins)
2014-07-24AGESA: Drop offset on PCI device enumerationKyösti Mälkki
Integrated PCI devices in southbridge silicon have static BDFs, no need to have variables to store the parent bus or an offset with constant zero. Change-Id: I37d3794d36b5e5775da9215574ddc199696646d0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6333 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-24AGESA fam15: Drop code that was commented outKyösti Mälkki
Only references to bus_rd890, bus_sp5100 and bus_sr5650 were in code sections that had been commented out. Change-Id: If5552c409ce948c494345f49dbaad790b398bff8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6331 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-24AGESA boards: Drop global bus_isaKyösti Mälkki
Only ever used as lvalue (except when incrementing) so this global is unused. Change-Id: I616721f937eb0bfdb28f356284efd70f99ccd2dd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6330 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-24AGESA fam15: Use local bus_isa storageKyösti Mälkki
Do not use a global as the value gets discarded anyway. Change-Id: I86aac304e073f0d74b011548d079e139891ec140 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6329 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-24src/mainboard: Remove trailing whitespaceElyes HAOUAS
Change-Id: I14a9dc99acb5d5365a3d7e99a3964120bb611b05 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: http://review.coreboot.org/6308 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-24tyan/s8226: Remove a trailing whitespaceElyes HAOUAS
Change-Id: Ic47cf1b55fc0d8b22d30d822b1744847e84d5a43 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: http://review.coreboot.org/6326 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-18mainboard: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
Change-Id: If29a70be4fb56ebb0dbf6d510412cbe2f34480ef Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6291 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-07-18mainboard: Make use of ARRAY_SIZE in buildOpts.c on AGESA platformsEdward O'Callaghan
Found using coccinelle. Change-Id: I406de6cfe25d3b471dbb6f98d9c62addae008de3 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6195 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-17AMD get_bus_conf(): Drop bus_type arrayKyösti Mälkki
Only ever used as lvalue, so no point creating the array. Change-Id: I6699dfae9377a895e9bc4a52579d00ddcfa60a9f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6277 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2014-07-17mainboard,Makefile.inc: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
Change-Id: I6a95debbe86fddcaf94270dd380bc73ce3172e58 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6283 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-07-14AGESA CIMx: Move late init out of get_bus_conf()Kyösti Mälkki
Followup deals further with Fam15 case. For unknown reasons calls were commented out for amd/dinar and they remain that way. Change-Id: Ie0a25fbb6f5378019fbf0f19a02acf024d79817e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6237 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-14AGESA: Trace execution with AGESAWRAPPER()Kyösti Mälkki
Implement logging just once to have uniform output. Change-Id: I8db694a3bf6b1af459bdf98f7acb99edf4dd07f7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6180 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-14AGESA: Fix error status code return type to enum from UINT32Edward O'Callaghan
AGESA correctly uses the enum AGESA_STATUS type whereas boards use a mess of UINT32 typecasts. Also no need to shout VOID. We are not that careful on changing all cases of VOID->void or whitespace issues as these files will get merged with follow-ups. Change-Id: I16ccfcc73cda6b917c7ff5fd42ee2cd04e7dc0dd Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6182 Tested-by: build bot (Jenkins)
2014-07-08mainboard: Trivial - drop trailing blank lines at EOF in .hEdward O'Callaghan
Change-Id: I4a4ee99468e5f1dae8412ae565a34290493db726 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6201 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-07-08mainboard: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
Change-Id: I05d6d22664155ac8478e665733f816776e277c22 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6200 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-07-05Drop redundant select CACHE_AS_RAMKyösti Mälkki
The few remaining boards without CAR override this with select ROMCC. Change-Id: Ifd5223e67f6a2dadb47846bdaab40b1be763cf69 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6172 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-03AGESA: Call get_bus_conf() just onceKyösti Mälkki
Instead of calling get_bus_conf() three times from write_tables() and executing it once, just make one call before entering write_tables(). Change-Id: I818e37128cb0fb5eaded3c1e00b6b146c1267647 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6133 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-03AGESA: Add agesawrapper_post_device()Kyösti Mälkki
NOTE: The procedure is moved across a collected timestamp TS_WRITE_TABLES, so the delay of SPI erase/write will be accounted for in an earlier entry in cbmem -t output. Change-Id: I0f082e7af1769c8d7d03cdd51fdb5dacbf3402b4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6132 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-06-26AMD boards: Fix typosKyösti Mälkki
Change-Id: I92f3877b58d9acaa9578337e66107e9cd9f46043 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6110 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-06-26PIRQ tables: Fix typosKyösti Mälkki
Change-Id: I4d8abe3841378e06515e1b3a8f22d78425d08449 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6109 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-06-18mainboard: Clear up remaining SIO_PORT from KconfigEdward O'Callaghan
Push back any board specific values back into romstage.c #defines and drop any remaining fragments of CONFIG_SIO_PORT in-tree. Change-Id: Ieb63fb0c2ab1a82b53bafd86686de7b21ac226c3 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6045 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-14amd/agesa,cimx: Rename ACPI OS detection methodsEdward O'Callaghan
Try to 'standardize' the otherwise peculiar method naming to be somewhat more in-line with other ACPI implementations. This makes it easier to compare with vendor DSDT dumps for example. Change-Id: I5ba54f7361796669ac0cab7ff91e7de43b22e846 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5888 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-06-06AGESA: Use common heap allocatorKyösti Mälkki
Change-Id: I5df1f0efdef2592b762fe391edaadbca4593e85a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5689 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-06AGESA: Use common GetBiosCallout()Kyösti Mälkki
Change-Id: I9c8f7cc98c65102486e17ec49fa2246211dffc4f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5688 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-06Drop unused change_i2c_mux()Kyösti Mälkki
Change-Id: I3ac39441746d739ac19e831bb67c76405c24ba27 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5925 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-05-31superio/nsc/pc87309: Avoid .c includes in mainboardEdward O'Callaghan
Make superio romstage component link-time symbols. Change-Id: Icde27465a05946498ff7b8f1aaa7a9e8ba074272 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5880 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-26AGESA fam12 fam14 fam15: Declare local callouts staticKyösti Mälkki
Change-Id: I2ff70cafdd808a235ed4f0663e182d306f493c7e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5685 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-26AGESA fam12 fam14 fam15: Common handler for AGESA_RUNFUNC_ONAPKyösti Mälkki
Change-Id: I9f27e1e814a80864d8ca315fe816a083c55708c6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5682 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-26AGESA fam12 fam15: Unify agesawrapper_amdlaterunaptaskKyösti Mälkki
Pass parameter Func like fam14, fam15tn and fam16kb. Change-Id: I262bf88e431f7035e668ac8f3fb29ac0690b3e52 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5681 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-26AGESA fam12 fam14 fam15: Common handler for AGESA_DO_RESETKyösti Mälkki
This is x86 "standard" 0xcf9 reset mechanism. Change-Id: Ieb48290b21a7cb1425881fdd65c794e96da0248f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5680 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-26AGESA: Add common calloutsKyösti Mälkki
Most of the callouts are not specific to board or even family. Start new file with default callouts doing nothing and returning either AGESA_SUCCESS or AGESA_UNSUPPORTED. Also add callout for returning empty IdsIdData. This feature is not used and could be easily overriden at board-level at later time. Change-Id: I65dbcdd80dddc89d47669ebe62c22caa63792f5c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5678 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-13southbridge/amd/sb?00/lpc.c: Move i8254/i8259 down in southbridgeEdward O'Callaghan
We should configure i8254/i8259 down in to the southbridge rather than romstage of every AGESA/CIMx board much like Intel boards do. Change-Id: Id7c4f0baa0819d52aef9b0ee03c20d0fa16b9352 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5669 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-10Replace SERIAL_CPU_INIT with PARALLEL_CPU_INITKyösti Mälkki
Lines with 'select SERIAL_CPU_INIT' where redundant with the default being yes. Since there is no 'unselect SERIAL_CPU_INIT' possibility, invert the default and rename option. This squelches Kconfig warnings about unmet dependencies. Change-Id: Iae546c56006278489ebae10f2daa627af48abe94 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5700 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-05-05AGESA: Fix BiosCallouts table formattingKyösti Mälkki
Already done for fam15tn and fam16kb. Change-Id: I3da36bfe6fd1805867eee5aa1f017c4fda084349 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5660 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-05AGESA: Implement EmptyHeap()Kyösti Mälkki
Heap allocation begins with BIOS_HEAP_MANAGER, no need to clear the fields individually. Change-Id: Ia1af84bd09d1edf8f72223752557d44a96dec6e1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5659 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-05AGESA fam15: Add GetHeapBase()Kyösti Mälkki
While fam15 boards do not select HAVE_ACPI_RESUME, backport this from fam14. Implementation of this function is common across different families. Change-Id: I222b418a0a79bbdf5f5cce6c876243ecb4912256 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5655 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-05AGESA fam15: Use common calloutsKyösti Mälkki
Backport from fam15tn and fam16kb. Change-Id: I6d8f9a88f0dc43c36efb168c0111a6e2bcdda5fd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5651 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-05AGESA fam15: Add fam15_callouts headerKyösti Mälkki
Backported from fam15tn and fam16kb. Change-Id: I13ca70d141a46220a5d8ea7bb3898bc7d7258424 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5650 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-03Move ARCH_* from board/Kconfig to cpu or soc Kconfig.Furquan Shaikh
CONFIG_ARCH is a property of the cpu or soc rather than a property of the board. Hence, move ARCH_* from every single board to respective cpu or soc Kconfigs. Also update abuild to ignore ARCH_ from mainboards. Change-Id: I6ec1206de5a20601c32d001a384a47f46e6ce479 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5570 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-30mainboard/: Avoid including early_serial.c from w83627hfEdward O'Callaghan
Following the reasoning of: dbbc136 mainboard/asrock/e350m1: Avoid including early_serial.c Change-Id: I5d729b90cf6713de2674fb00c726cd2944a3ab4e Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5597 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-28mainboard/tyan/s8226: Remove redundant sio headerEdward O'Callaghan
Change-Id: I8d258c12d03e71fb525251104b4fa81596ad2187 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5599 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-28superio/winbond/w83627dhg: Convert romstage to generic componentEdward O'Callaghan
Convert the serial init to the generic romstage component and corresponding boards using this sio. Change-Id: I36bcf38c4351130be1ed924ecfe606336d0433f3 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5588 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-28AMD: Add common header file for CAR setupKyösti Mälkki
Change-Id: I24b2cbd671ac3a463562d284f06258140a019a37 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4683 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-04-26mainboard/*: Remove DUMP_ACPI_TABLES from amd boardsEdward O'Callaghan
Dumping the ACPI tables in this way has limited use, is not likely to be used and is poorly implemented. There are much more sophisticated tools available on Linux for debugging ACPI as such this code is outside the scope of coreboots 'bring up the hardware only' philosophy. A more generic implemention could be done with hexdump() in coreboot proper following on from this cleanup. Change-Id: Ifd3bfb76338609d18fcf7158d3c9a6d7c06c8847 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5530 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-22Drop drivers/generic/debugKyösti Mälkki
Not very popular nor useful nowadays. Change-Id: I3dc0f7aaf188950a43f5350d3a95669fbbdcfd94 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4554 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-04-20AMD AGESA cimx/sb700: Drop APIC_ID_OFFSET and MAX_PHYSICAL_CPUSKyösti Mälkki
Following boards use cimx/sb700: amd/dinar supermicro/h8qgi supermicro/h8scm tyan/s8226 Only amd/dinar had APIC_ID_OFFSET defined, thus all had 0x0. There was a nonsense preprocessor directive (MAX_CPUS * MAX_PHYSICAL_CPUS >= 1). Except for tyan, (MAX_CPUS * MAX_PHYSICAL_CPUS) % 256 == 0. Together with documented 4-bit restriction for APIC ID field, this APIC ID programming matches with MP tables and ACPI tables. I believe this would also fix cases of cimx/sb700 with MAX_CPUS<16, which we do not have in the tree. Change-Id: If8d65e95788ba02fc8d331a7af03a4d0d8cf5c69 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5539 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-13cimx/sb800 boards: Don't require ide.asl on boards without IDEEdward O'Callaghan
Not all boards which use the AMD cimx/sb800 southbridge have IDE. However, the southbridge's asl included an 'ide.asl' file which had to be present in $(mainboard_dir)/acpi. Address this issue by including ide.asl only in boards which have IDE, and remove it from all other cimx/sb800 boards. Change-Id: I57fcb4db9f85234b05ae1705ef81a576c478cee6 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5460 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-02-06console: Drop extra uart_init()Kyösti Mälkki
This call is already in console_init(). Change-Id: Ie0cb3595af514e37efac5ac5d474f52ba551bf22 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5140 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-01-19board_info.txt: Categorize various boardsVladimir Serbinenko
Info supplied by: idwer Change-Id: I3086e8118a721ded33c578c6c82e20642ef9d776 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4733 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)