| Age | Commit message (Expand) | Author |
|---|
| 2009-10-26 | cp src/mainboard/tyan/Makefile.k8_CAR.inc to src/mainboard/Makefile.k8_ck804.inc | Myles Watson |
| 2009-10-26 | Move src/mainboard/tyan/Makefile.s289x.inc to src/mainboard/Makefile.k8_CAR.inc. | Myles Watson |
| 2009-10-26 | Define some variables that were not defined. There are a couple left. | Myles Watson |
| 2009-10-24 | Major cleanups of the hard_reset() code and config in coreboot. | - supermicro/x6dhe_g/auto.c |
| 2009-10-24 | move all register fram definitions to arch/register.h | Stefan Reinauer |
| 2009-10-23 | Drop dead K8_SCAN_PCI_BUS code. It's a bad idea to scan the PCI busses before | Myles Watson |
| 2009-10-20 | Remove CONFIG_CPU_AMD_FAM10 & CONFIG_CPU_AMDK8 from mainboards. They should be | Myles Watson |
| 2009-10-20 | Fix all board names in Kconfig as per wiki / vendor website. | Uwe Hermann |
| 2009-10-19 | Unselect AP_CODE_IN_CAR in tyan/s289x. Trivial. | Myles Watson |
| 2009-10-18 | Simplify Kconfig files by using "select" where possible (trivial). | Uwe Hermann |
| 2009-10-17 | Move files from src/cpu/x86/{fpu,mmx,sse}/ to x86/ | Peter Stuge |
| 2009-10-17 | Remove CONFIG_ from #defines that aren't config variables. Trivial. | Myles Watson |
| 2009-10-16 | Fix AP_CODE_IN_CAR (only selected for two boards), STACK_SIZE, and HEAP_SIZE. | Myles Watson |
| 2009-10-16 | Drop enable_mmx.inc. It reads (only) "Enabling mmx registers is a noop" | Peter Stuge |
| 2009-10-16 | Set default ROM sizes per-board to match the ROM chip that came | Uwe Hermann |
| 2009-10-16 | Change CONFIG_LB_MEM_TOPK to CONFIG_RAMTOP to match CONFIG_RAMBASE. | Myles Watson |
| 2009-10-16 | Fix IRQ9 and allow ACPI without an MP table for Tyan s289x. | Myles Watson |
| 2009-10-15 | Add CONFIG_GENERATE_* for tables so that the user can select which tables not | Myles Watson |
| 2009-10-14 | White space and typo fixes. This makes it easier to compare the s2895 & s2892. | Myles Watson |
| 2009-10-14 | Use CAR ck804 code with the s2892. | Myles Watson |
| 2009-10-13 | White space change in preparation for a patch to unify handling of ck804. | Myles Watson |
| 2009-10-13 | Revert some garbage that snuck into my trivial change, correct a spelling error. | Myles Watson |
| 2009-10-13 | Remove a couple more warnings. Trivial. | Myles Watson |
| 2009-10-13 | Fix obvious typos (trivial). | Uwe Hermann |
| 2009-10-11 | HAVE_ACPI_TABLES cleanups for kconfig: | Uwe Hermann |
| 2009-10-09 | Add const to get rid of some warnings when passing quoted strings. | Myles Watson |
| 2009-10-08 | Kconfig: AMD Fam10, all Tyan boards. | Patrick Georgi |
| 2009-10-07 | Major CONFIG_IRQ_TABLE_COUNT fixing and cleanups. Some of these boards | Uwe Hermann |
| 2009-10-07 | Convert all "default y" options to "select FOO" (shorter). | Uwe Hermann |
| 2009-10-06 | Use | Uwe Hermann |
| 2009-10-06 | Various fixes to Kconfig: All kconfig-boards should have a | Patrick Georgi |
| 2009-10-06 | Remove duplicate device trees for Tyan s289x. Remove pre-CBFS statements. | Myles Watson |
| 2009-10-05 | PCI_ROM_RUN and CONSOLE_VGA are global options in Kconfig and | Uwe Hermann |
| 2009-10-04 | The new CBFS based build system requires the whole ROM to be accessible | Uwe Hermann |
| 2009-10-04 | This does away with CONFIG_ROM_PAYLOAD_START and CONFIG_PAYLOAD_SIZE. | Patrick Georgi |
| 2009-10-03 | Move HAVE_FAILOVER_BOOT and USE_FAILOVER_IMAGE from | Patrick Georgi |
| 2009-10-03 | Remove: | Patrick Georgi |
| 2009-10-03 | Remove duplicate and not too useful Kconfig board comments as | Uwe Hermann |
| 2009-09-29 | Fix a number of board names in Kconfig (trivial). | Uwe Hermann |
| 2009-09-29 | Remove MAINBOARD_OPTIONS, which is a relic from early | Patrick Georgi |
| 2009-09-25 | some progress on kconfig: | Patrick Georgi |
| 2009-09-23 | simplify source tree hierarchy: move files from sdram/ and ram/ to lib/ | Stefan Reinauer |
| 2009-09-23 | Add Kconfig support for Tyan s2881. | Myles Watson |
| 2009-09-22 | src/Kconfig: Remove HT-specific options. | Myles Watson |
| 2009-09-22 | failoverR.diff: Revert my failover change since Kconfig only supports fallback. | Myles Watson |
| 2009-08-26 | Add kconfig support for all missing Intel 440BX based boards. | Uwe Hermann |
| 2009-08-19 | Reduce size of the romstage on various boards that fail to build on QA. | Patrick Georgi |
| 2009-08-12 | Kconfig! | Patrick Georgi |
| 2009-08-11 | Enable CBFS everywhere. All boards compiled for me (abuild tested), | Patrick Georgi |
| 2009-07-21 | This fixes a couple of issues with older Linux kernels (that expect an XSDT as | Stefan Reinauer |
| 2009-07-16 | Separate cache_as_ram_auto.c and failover.c for Tyan s2895. | Myles Watson |
| 2009-06-30 | the tool chain settings should not be in renamed (as they will never live in | Stefan Reinauer |
| 2009-06-30 | This patch unifies the use of config options in v2 to all start with CONFIG_ | Stefan Reinauer |
| 2009-06-19 | Undo my ugly commit that added uses clauses in lots of places instead of one. | Myles Watson |
| 2009-06-17 | Fix configuration of boards that didn't have uses CONFIG_USE_INIT. Trivial. | Myles Watson |
| 2009-06-11 | Fix s2895 failover booting. | Myles Watson |
| 2009-06-06 | When I started refactoring mainboard Config.lb, I added two different | Carl-Daniel Hailfinger |
| 2009-06-03 | Revert "CMOS: Add set_option and rework get_option." | Luc Verhaegen |
| 2009-06-03 | CMOS: Add set_option and rework get_option. | Luc Verhaegen |
| 2009-05-26 | Various fixes to the tree to get coreboot-v2 to build on Solaris | Patrick Georgi |
| 2009-05-14 | Update equivalent processor revision ID to load latest microcode patches and | Marc Jones |
| 2009-05-01 | Trivial patch to make #defines generated from cmos.layout have unique names. ... | Myles Watson |
| 2009-04-30 | Remove warnings from compilation of the s2892 with and without CBFS. | Myles Watson |
| 2009-04-30 | Trivial fix for tyan/s2735: a newly used option wasn't defined as "used" | Patrick Georgi |
| 2009-04-30 | Add "printk" support to all CAR targets | Stefan Reinauer |
| 2009-04-30 | Refactor copy_and_run so that it uses a single code base instead of | Patrick Georgi |
| 2009-04-28 | Enable HAVE_HIGH_TABLES by default for northbridges with | Patrick Georgi |
| 2009-04-28 | add_mainboard_resources is necessary for some boards (eg. kontron), but | Patrick Georgi |
| 2009-04-22 | drop duplicate compiler options that are already mentioned in CFLAGS. | Stefan Reinauer |
| 2009-04-22 | This patch unifies the socket_mPGA604_800Mhz and socket_mPGA604_533Mhz to a | Stefan Reinauer |
| 2009-04-21 | Thanks to Myles' patch adding support for include statements, | Carl-Daniel Hailfinger |
| 2009-04-14 | v2/src romfs->cbfs rename | Peter Stuge |
| 2009-04-13 | I need to do uses HAVE_ACPI_RESUME for each board. Here we go. | Rudolf Marek |
| 2009-04-12 | This patch cleans up the calls to $CC in mainboard Config.lb files. They | Carl-Daniel Hailfinger |
| 2009-04-11 | Bring S2912 and S2912_Fam10 Config.lb in line with each other. | Carl-Daniel Hailfinger |
| 2009-04-11 | Kill remaining unneeded CAR/ROMCC if-blocks. | Carl-Daniel Hailfinger |
| 2009-04-03 | Fix up the incomplete commit in r4055. | Carl-Daniel Hailfinger |
| 2009-04-03 | There are more than a dozen targets in the v2 tree which refer to ROMCC | Carl-Daniel Hailfinger |
| 2009-04-03 | Next step. Kill auto.c and failover.c and clean up Config.lb for | Carl-Daniel Hailfinger |
| 2009-04-03 | There are more than a dozen targets in the v2 tree which refer to ROMCC | Carl-Daniel Hailfinger |
| 2009-04-01 | Drop CONFIG_CHIP_NAME. Those config statements in Config.lb should | Stefan Reinauer |
| 2009-03-31 | Add the CONFIG_ROMS config variable. | Ronald G. Minnich |
| 2009-03-13 | This patch reverts SuperIO changes that I was too hasty with. Even though the | Myles Watson |
| 2009-03-13 | This, ladies and gentlement, is commit #4000. | Stefan Reinauer |
| 2009-03-10 | This patch adds ACPI support for Tyan s2891, s2892, and s2895. There is still | Myles Watson |
| 2009-02-28 | coreboot-v2: drop this ugly historic union name in v2 that was dropped in v3 | Stefan Reinauer |
| 2009-02-18 | Carl-Daniel's part: | Carl-Daniel Hailfinger |
| 2009-02-09 | Remove some warnings, mainly from format strings which didn't match the | Myles Watson |
| 2009-01-20 | This patch makes the recently added assembler debug optional, as it may | Stefan Reinauer |
| 2008-12-22 | Fix implicit declarations of get_bus_conf. | Carl-Daniel Hailfinger |
| 2008-12-22 | In the process of trying to debug some HT sync problems I added lots of | Carl-Daniel Hailfinger |
| 2008-12-10 | Use -O2 and -mcpu=p2 as romcc options for all Intel 440BX boards. | Uwe Hermann |
| 2008-11-28 | This patch from Ralf Grosse Boerger makes debugging more comfortable. | Stefan Reinauer |
| 2008-11-27 | Remove the unnecessary memctrl[] indirection, 440BX only has one | Uwe Hermann |
| 2008-11-20 | OK, people, watch this. | Stefan Reinauer |
| 2008-10-30 | Here's a patch towards r3690 upping the ROM size for the S2912 Fam10 target t... | Arne Georg Gleditsch |
| 2008-10-13 | Drop unused (or commented / #if 0) reset.c files. | Uwe Hermann |
| 2008-10-12 | Drop tons of duplicated debug.c files, move common file to | Uwe Hermann |
| 2008-10-10 | Enable vga bios by default on Tyan s2881. The board has an onboard ati rage XL. | Ward Vandewege |
| 2008-10-06 | Whitespace fixes. | Myles Watson |
