summaryrefslogtreecommitdiff
path: root/src/mainboard/tyan/s4882/Kconfig
AgeCommit message (Collapse)Author
2015-06-05AMD K8: Move SB_HT_CHAIN_ON_BUS0 default 0Kyösti Mälkki
Define the default value under northbridge. The list of boards this patchset touches will change to use SB_HT_CHAIN_ON_BUS0 with follow-up patch. Based on code analysis, these boards already scan system bus as the first (active) HT chain, so it is placed as bus 0 even when this option was not explicitly selected. Change-Id: I5a00d6372cb89151940aeee517ea613398825c78 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8353 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2014-05-03Move ARCH_* from board/Kconfig to cpu or soc Kconfig.Furquan Shaikh
CONFIG_ARCH is a property of the cpu or soc rather than a property of the board. Hence, move ARCH_* from every single board to respective cpu or soc Kconfigs. Also update abuild to ignore ARCH_ from mainboards. Change-Id: I6ec1206de5a20601c32d001a384a47f46e6ce479 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5570 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2013-12-29AMD K8: Socket implies K8_REV_F_SUPPORTKyösti Mälkki
K8_REV_F_SUPPORT is already set by all affected sockets, (AM2, F, S1G1). Change-Id: If42a4178263d90a4e195fae0c78943ac9eda1ad6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4557 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-06-24AMD: Drop empty root_complexKyösti Mälkki
There are no files to build left under AMD nortbridge/x/root_complex directories. For some cases, even the Kconfig file was no longer sourced. Remove all such references and empty files. For devicetree.cb treat component paths with "/root_complex" in them valid even when the directory does not exists. This is because AMD boards us this dummy chip component as the root node in their devicetree.cb. The generated devicetree file static.c remains unchanged. Change-Id: I9278ebb50a83cebbf149b06afb5669899a8e4d0b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3434 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2012-02-17amd/amd8111: Move HAVE_HARD_RESET to southbridgePatrick Georgi
No in-tree amd8111-using board has it not selected, so move selection from boards to southbridge. Change-Id: Iabbaa4cd2fd367ed6decec7ef5cdcbae3b264d52 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/654 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2011-03-01Use subsystem id from devicetree.cb instead of Kconfig and moveSven Schnelle
all boards to the new config scheme. Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6421 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-05Move QRANK_DIMM_SUPPORT to Kconfig, removing it from romstage.cPatrick Georgi
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6028 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-30Move CAR settings to board config for socket 940 boards.Warren Turkal
For the a number of the socket 940 based machines, I collapsed their CAR configurations into the socket config. However, I have kept a number of overrides in place for the following machines: * broadcom/blast * ibm/e32{5,6} * newisys/khepri * sunw/ultra40 * tyan/s488{0,2} These machines used different setting than the defaults for socket 940 systems. Signed-off-by: Warren Turkal <wt@penguintechs.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5883 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-28Remove redundant HW_MEM_HOLE_SIZEK and HW_MEM_HOLE_SIZE_AUTO_INC settings.Myles Watson
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5875 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-30We call this cache as ram everywhere, so let's call it the same in KconfigStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Myles Watson <mylesgw@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5756 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-30Restructured all vendors' Kconfig files to no longer source the boards'Jens Rottmann
Kconfigs from within the choice/endchoice block. This makes it possible to define user visible board specific options. Moved all vendor names and PCI ids to the vendors' Kconfigs. Now all options in each file depend on the same symbol, so replaced all "depends on"s with a single "if". Sorted boards (sort -d), cleaned whitespace. This patch also introduces a dummy option BOARD_SPECIFIC_OPTIONS, which is always "y" and never used. It it simply needed to have something to attach the boards' "select" statements to. Signed-off-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5754 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-03Drop the USE_PRINTK_IN_CAR option. It's a bogus decision to make for any user /Stefan Reinauer
board porter: printk should always be available in CAR mode. Also drop CONFIG_USE_INIT, it's only been selected on one ASROCK board but it's not been used there. Very odd. There is one usage of CONFIG_USE_INIT which was always off in src/cpu/intel/car/cache_as_ram.inc and we have to figure out what to do with those few lines. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5682 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-07-06Re-integrate "USE_OPTION_TABLE" code.Edwin Beasant
Signed-off-by: Edwin Beasant <edwin_beasant@virtensys.com> Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5653 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-30drop USE_INIT from mainboard Kconfig files, it's already set in src/KconfigStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5331 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-29This patch drops the coreboot CMOS checksum ranges from Kconfig becauseStefan Reinauer
the information is already specified in cmos.layout. coreboot is changed to use that version instead. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmai.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5313 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-01-25More Kconfig changes to improve match with newconfig:Patrick Georgi
DIMM_SUPPORT APIC_ID_OFFSET ACPI_SSDTX_NUM IRQ_SLOT_COUNT MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID (except msi/ms9185) MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID MEM_TRAIN_SEQ HAVE_ACPI_RESUME Also remove MMX (kconfig specific) and HAVE_MOVNTI and IOAPIC (which we deliberately differ in kconfig) from compareboard report. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5052 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-01-25Align several kconfig options to match newconfig:Patrick Georgi
HT_CHAIN_UNITID_BASE HT_CHAIN_END_UNITID_BASE SB_HT_CHAIN_ON_BUS0 SB_HT_CHAIN_UNITID_OFFSET_ONLY MAX_CPUS MAX_PHYSICAL_CPUS ROM_SIZE TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 Also hook up asus/p2b-ds Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5051 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-01-18Move all IOAPIC selection to southbridges, and remove themPatrick Georgi
from mainboards. Some adaptations were necessary after the IOAPIC cleanup, so this should fix the build. Fix intel/d945gclf build, which was missing some ACPI component. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5039 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-11-27Make newconfig and kconfig agree on MAINBOARD_PCI_SUBSYSTEM_{VENDOR,DEVICE}_IDPatrick Georgi
Usually, this means adding values to Kconfig, but in a few cases, adding values to newconfig, too (which doesn't hurt). Also really hook up tyan/s2850 and tyan/s2875 to kconfig, and have them still build. Trivial and stupid kconfig changes, just lots of them. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4959 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-20Remove CONFIG_CPU_AMD_FAM10 & CONFIG_CPU_AMDK8 from mainboards. They should beMyles Watson
selected in sockets, and they aren't used yet. Add a couple of variables to src/Kconfig for lack of a better place so that their selects work. Add select statements according to newconfig for some variables that were defined but never selected in mainboard configs. Fix #if CONFIG_VGA==1 -> #if CONFIG_VGA. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4816 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-20Fix all board names in Kconfig as per wiki / vendor website.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4815 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-16Set default ROM sizes per-board to match the ROM chip that cameUwe Hermann
with the respective board. Of course, the user can still override the size in menuconfig. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4790 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-15Add CONFIG_GENERATE_* for tables so that the user can select which tables notMyles Watson
to build, but by default all the tables that are available are built. Make PIRQ table build for qemu. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4778 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-08Kconfig: AMD Fam10, all Tyan boards.Patrick Georgi
Fam10 doesn't build due to size constraints at this time. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4741 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 03:42:25 +0000