| Age | Commit message (Collapse) | Author |
|---|
|
(scan-build chokes on this)
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4181 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
refactoring Config.lb became possible.
Factor out ROM size calculation from Config.lb.
This patch converts 87 boards (with and without USE_FAILOVER_IMAGE),
but it has to work around a parser bug.
89 files changed, 209 insertions(+), 2415 deletions(-)
A total of 2206 removed lines.
Abuild works for all changed boards on khepri.
Myles writes:
I've tested serengeti for the failover portion and s2892 for the
nofailover portion. ldoptions are exactly the same and they both boot
the same.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4147 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
now all have the same parameter order.
action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS)
-I$(TOP)/src -I. -nostdinc -nostdlib -fno-builtin -Wall -Os -c -S
$(MAINBOARD)/$(CACHE_AS_RAM_AUTO_C) -o $@"
The idea behind this parameter order is:
- *FLAGS at the beginning.
- Use a common set of *FLAGS.
- Include files and directories listed afterwards.
- nostdinc, nostdlib, no-builtin tell the compiler this is standalone
code.
- Warnings. They do not influence source or compilation.
- Compilation strategy (small) and output mode (asm or binary).
- File to be compiled.
- Output name.
- $(DEBUG_CFLAGS) and -S are only used for asm output.
Other changes in this patch:
- src/supermicro/h8dme/Config.lb now uses $DEBUG_CFLAGS instead of
hardcoding the respective flags.
- $DEBUG_CFLAGS was added to asm outputting $CC calls:
supermicro/h8dme/Config.lb
lippert/roadrunner-lx/Config.lb
- $DISTRO_CFLAGS was added to some $CC calls in:
iwill/dk8_htx/Config.lb (CAR AP code)
supermicro/h8dmr/Config.lb (CAR AP code)
supermicro/h8dme/Config.lb (CAR AP code)
gigabyte/m57sli/Config.lb (CAR AP code)
gigabyte/ga_2761gxdk/Config.lb (CAR AP code)
amd/serengeti_cheetah_fam10/Config.lb (everywhere)
msi/ms7135/Config.lb (everywhere)
nvidia/l1_2pvv/Config.lb (CAR AP code)
-$CFLAGS was added to all $CC calls in:
amd/db800/Config.lb
amd/dbm690t/Config.lb
amd/norwich/Config.lb
amd/pistachio/Config.lb
amd/serengeti_cheetah/Config.lb
amd/serengeti_cheetah_fam10/Config.lb
arima/hdama/Config.lb
artecgroup/dbe61/Config.lb
asus/a8n_e/Config.lb
asus/a8v-e_se/Config.lb
asus/m2v-mx_se/Config.lb
broadcom/blast/Config.lb
digitallogic/msm800sev/Config.lb
gigabyte/ga_2761gxdk/Config.lb
gigabyte/m57sli/Config.lb
ibm/e325/Config.lb
ibm/e326/Config.lb
iei/pcisa-lx-800-r10/Config.lb
iwill/dk8_htx/Config.lb
iwill/dk8s2/Config.lb
iwill/dk8x/Config.lb
kontron/986lcd-m/Config.lb
lippert/roadrunner-lx/Config.lb
lippert/spacerunner-lx/Config.lb
msi/ms7135/Config.lb
msi/ms7260/Config.lb
msi/ms9185/Config.lb
msi/ms9282/Config.lb
newisys/khepri/Config.lb
nvidia/l1_2pvv/Config.lb
pcengines/alix1c/Config.lb
sunw/ultra40/Config.lb
supermicro/h8dme/Config.lb
supermicro/h8dmr/Config.lb
technexion/tim8690/Config.lb
tyan/s2735/Config.lb
tyan/s2850/Config.lb
tyan/s2875/Config.lb
tyan/s2880/Config.lb
tyan/s2881/Config.lb
tyan/s2882/Config.lb
tyan/s2885/Config.lb
tyan/s2891/Config.lb
tyan/s2892/Config.lb
tyan/s2895/Config.lb
tyan/s2912/Config.lb
tyan/s2912_fam10/Config.lb
tyan/s4880/Config.lb
tyan/s4882/Config.lb
- Use $@ wherever appropriate.
- Kill that evil CACHE_AS_RAM_AUTO_C variable.
- Trailing whitespace fixups on lines which were touched anyway.
We now only have 6 remaining different calls to $CC whereas before there
were 20.
If I am allowed to rename src/mainboard/kontron/986lcd-m/auto.c to
src/mainboard/kontron/986lcd-m/cache_as_ram_auto.c, we're down to 4
different calls.
If we can decide on the use of $CPU_OPT, we are down to 3 different
calls.
One additional point I'd like to clear up:
if ASSEMBLER_DEBUG
makedefine DEBUG_CFLAGS := -g -dA -fverbose-asm
end
"-dA -fverbose-asm" is only useful for asm output. For these flags,
DEBUG_CFLAGS is a total misnomer. What about calling them
DEBUG_ASMCFLAGS or somesuch?
"-g" should be controllable by a separate switch. It is useful even for
object code.
The following targets are broken by this patch because they contain
implicit declarations, but the error did not trigger due to missing
CFLAGS:
amd/serengeti_cheetah
asus/a8v-e_se
asus/m2v-mx_se
digitallogic/msm800sev
pcengines/alix1c
supermicro/h8dme
supermicro/h8dmr
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4097 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
- Use $(CACHE_AS_RAM_AUTO_C) instead of cache_as_ram_auto.c
- Compile apc_auto.c with $(DISTRO_CFLAGS)
- Clean up whitespace
If anyone can explain the remaining differences in Config.lb which are
NOT caused by the K8/Fam10 switch, I'd be glad to hear them.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4095 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Lots of Config.lb files still have "if USE_DCACHE_RAM" sections although
USE_DCACHE_RAM is always set for them. Such checks are not only
pointless, they actively make the files hard to read.
A full abuild run confirmed that compilation did not change with this
patch applied.
The patch does not change whitespace of the remaining code to ease
review and svn blame.
With this change, it should be possible to have two or three Config.lb
variants in total (except the actual hardware config). Right now, some
Config.lb have comments, some don't, some have empty lines for better
readability, some don't, some have leading whitespace, some don't. This
is an utter mess and unifying these files would certainly reduce the
headaches I have when looking at them.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4093 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
be used unconditionally, and the names don't hurt.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4042 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
cause problems with certain toolchains. This patch will also safe some hard
disk space for those of us working on laptops or netbooks with always too small
disks.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3876 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
With this patch it's possible to
- determine the according source code line for each asm statement
(objdump -dS)
- determine the source code file for each asm statement
(objdump -ddl)
This isn't exactly trivial because cache_as_ram_auto.c gets compiled to
assembly and converted by a perl script afterwards.
This patch solves the problem
- by extending cache_as_ram_auto.inc with debug information and line
numbers
- by correcting the perl calls (".text" --> "\.text")
- by creating a disassembly with source code and line numbers.
(ctr0.disasm and
coreboot.disasm)
There's one minor downside to the patch: A complete abuild run takes up
around 1.6G instead of about 700MB now. But I'm sure this is quite
reasonable for the benefits.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Please commit while this is being worked out.
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3778 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3638 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
DISTRO_CFLAGS were not being
included on the CC line for cache_as_ram_auto.c
Tested on ubuntu, where formerly it failed.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Corey Osgood <corey.osgood@gmail.com>
Acked-by: Ward Vandewege <ward@gnu.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3079 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Due to the automatic nature of this update, I am self-acking. It worked in
abuild.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3053 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
code is changed.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3052 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
It does the ROM_STREAM -> PAYLOAD rename that afaik was done after
Yinghai sent his work to legal, so it is required to get that code
building.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2561 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
* Nvidia l1_2pvv
* Gigabyte m57sli
* Supermicro h8dmr
* Tyan s2912 -- with HTX
The boards will currently _not_ compile, two further patches
from Yinghai Lu are still missing. Please be patient :)
Signed-off-by: Yinghai Lu <yinghai.lu@amd.com>
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2554 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
