summaryrefslogtreecommitdiff
path: root/src/mainboard/ti/beaglebone/board.fmd
AgeCommit message (Collapse)Author
2024-08-02soc/ti/am335x: Change and optimize memlayoutArthur Heymans
Clang builds (bootblock: 20800 bytes) are slightly larger than GCC builds (bootblock: 18688 bytes) so increase the size of both bootblock and romstage. The technical reference manual mentions no upper limit to the size of the bootblock in the TI header so increasing the bootblock size is allowed. To be able to link the clang bootblock increase it from 20K to 22K. Change-Id: I8719bc3728d4cc8dba8d939cc154c3fc0884d47b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70160 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2022-04-06mb/ti/beaglebone/board.fmd: Use 'FLASH' as device nameArthur Heymans
FLASH is often used when accessing FMAP base and size from fmap_config.h so it's handy to be consistent with all other boards. Change-Id: Ibba938c72d42ac74dcea8e8e6478ddae510d8c03 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63349 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-03-30mb/ti/beaglebone: Load romstage/ramstage from SDSam Lewis
Adds a "sd_media" boot_device to allow booting from the SD card. This assumes that the generated "MLO" file is placed at a 128KB offset from the start of the SD card, to allow for the MBR etc. to be at the start of the SD card. Placing the MLO file here allows the AM335x boot ROM to load and execute the bootblock stage as well, as 128KB is one of the offsets the boot ROM checks when looking for the next stage to execute. As part of this, a FMD for the Beaglebone has also been defined. It's sized at 32M somewhat arbitrarily, as SD cards could allow for much bigger payloads. TEST: Beaglebone boots from bootblock into romstage. Romstage to ramstage still doesn't work as it needs RAM initialization first. Change-Id: I5f6901217fb974808e84aeb679af2f47eeae30fd Signed-off-by: Sam Lewis <sam.vr.lewis@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44385 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>