summaryrefslogtreecommitdiff
path: root/src/mainboard/technexion
AgeCommit message (Collapse)Author
2018-05-08src/mainboard: Set ACPI OEM ID values to 6 characters longMartin Roth
Change OEM ID values to 6 characters to fix error compiling with IASL version 20180427. Also update table creator to 8 characters from 7. Change-Id: Id6c9a7b08dc4a9efeb69011393e29aa5a6bc54c4 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/26047 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-01-26mb/*/*/cmos.layout: Fix the values for the console levelArthur Heymans
Fix the values that were off by one. This was discovered when using postcar stage that prints with debuglevel BIOS_NEVER. Change-Id: I73a077950ed0dc735d89c9747a8da0a25f30822d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23186 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-11-28AMD platforms: Fix ASL comment that implies "\_SB" is southbridgeMartin Roth
Change-Id: I6ee86396a1c5aaee248a275b42da801cedace586 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22578 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-09-23mb/*/*: Remove rtc nvram configurable baud rateArthur Heymans
There have been discussions about removing this since it does not seem to be used much and only creates troubles for boards without defaults, not to mention that it was configurable on many boards that do not even feature uart. It is still possible to configure the baudrate through the Kconfig option. Change-Id: I71698d9b188eeac73670b18b757dff5fcea0df41 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19682 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-08-23AMD fam10 ACPI: Use common fixed sleepstates.aslKyösti Mälkki
SSFG was meant to be used as a mask to enable sleepstates _S1 thru _S4. However as a logical instead of bitwise 'and' operation was used, all the states were enabled if only one was marked available. Note that all boards incorrectly had SSFG == 0x0D that previously enabled ACPI S3 sleep state even when it was not available. Change-Id: Ia948becff079383cbf861468da9e8a3ebbf213cb Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21093 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-08-22AMD K8 fam10-15: Consolidate post_cache_as_ram callKyösti Mälkki
Change-Id: I5e7890aafbc8c80716ee49690e306482a482a863 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20573 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2017-07-14K8: Fix indirect includesKyösti Mälkki
Change-Id: I370285aa52776170a32b6dd36c0eef74eea9400c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20562 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-07-06mainboard/[m-w]: add IS_ENABLED() around Kconfig symbol referencesMartin Roth
Change-Id: Ifba3257b0328d0b6ad1bee9bf885683998df5851 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20344 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-04-28nb/amdk8: Link coherent_ht.cArthur Heymans
Change-Id: I1ef1323dc1f3005ed194ad82b75c87ef41864217 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19367 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-04-28nb/amd/amdk8: Link reset_test.cArthur Heymans
This needs some extra headers in amdk8/raminit.c that were otherwise provided by that file. Change-Id: I80450e5eb32eb502b3d777c56790db90491fc995 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19360 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-04-27nb/amd/amdk8: Link raminit_f.cArthur Heymans
For this debug.c needs to be linked too. Change-Id: I9cd1ffff2c39021693fe1d5d3f90ec5f70891f57 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19030 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-04-10nb/amdk8/(pre_)f.h: Don't declare global variable in headerArthur Heymans
This is needed if one wants to use the header more than once. Change-Id: I375d08465b6c64cd91e7563e3917764507d779ba Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19029 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-03-23mainboard/technexion/tim5690: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/technexion/tim5690. Change-Id: I661daa5ab34c70db8ed783e5bf1114877f13b548 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17307 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-12-26amd-based mainboards: Fix whitespace in _PTS commentsMarshall Dawson
Correct tabs that were intended as spaces. Change-Id: Idcf33d829f87a866b5ed880527102918d5b93842 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/17905 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-12-06cpu/amd/mtrr.h: Drop excessive includesKyösti Mälkki
Change-Id: Id404bdab1f2361f1e7d20f7ee72111971863dddf Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17736 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-06cpu/x86/msr.h: Drop excessive includesKyösti Mälkki
Change-Id: Ic22beaa47476d8c600e4081fc5ad7bc171e0f903 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17735 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-10-01mainboard/*/*/*/usb.asl: Use tabs for indentsElyes HAOUAS
Change-Id: Id46a0c4ca59dc7224c2eedd674ea3a5486509de1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16824 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-28mainboard/technexion/tim5690: Use tabs for indentsElyes HAOUAS
Change-Id: Icd1f145b3575c6d95dacceb9c0426fbdedcdd686 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16777 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20src/mainboard/lenovo-winent: Add space around operatorsElyes HAOUAS
Change-Id: Iab2a879ebdea9d93ef5eb7e3abf875036c1e1cb4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16641 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-17mainboard: Clean up boot_option/reboot_bits in cmos.layoutNico Huber
Since commit 3bfd7cc (drivers/pc80: Rework normal / fallback selector code) the reboot counter stored in `reboot_bits` isn't reset on a reboot with `boot_option = 1` any more. Hence, with SKIP_MAX_REBOOT_CNT_CLEAR enabled, later stages (e.g. payload, OS) have to clear the counter too, when they want to switch to normal boot. So change the bits to (h)ex instead of (r)eserved. To clarify their meaning, rename `reboot_bits` to `reboot_counter`. Also remove all occurences of the obsolete `last_boot` bit that have sneaked in again since 24391321 (mainboard: Remove last_boot NVRAM option). Change-Id: Ib3fc38115ce951b75374e0d1347798b23db7243c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/16157 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-by: York Yang <york.yang@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-14src/mainboard: Capitalize ROM, RAM, CPU and APICElyes HAOUAS
Change-Id: Ia1f24d328a065a54975adde067df36c5751bff2d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/15987 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-01Remove non-ascii & unprintable charactersMartin Roth
These non-ascii & unprintable characters aren't needed. Change-Id: I129f729f66d6a692de729d76971f7deb7a19c254 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15977 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-07-31mainboard: Format irq_tables.cPaul Menzel
Run the command below to format the files `irq_tables.c` of (mostly AMD) mainboards correctly with GNU indent 2.2.10. ``` $ git grep -l 'if (sum != pirq->checksum) {' | xargs indent -l ``` Fix up the following two checkpatch.pl errors manually. ``` ERROR: that open brace { should be on the previous line #1219: FILE: src/mainboard/gigabyte/ga_2761gxdk/irq_tables.c:129: + uint8_t reg[8] = + { 0x41, 0x42, 0x43, 0x44, 0x60, 0x61, 0x62, 0x63 }; ERROR: that open brace { should be on the previous line #1221: FILE: src/mainboard/gigabyte/ga_2761gxdk/irq_tables.c:131: + uint8_t irq[8] = + { 0x0A, 0X0B, 0X0, 0X0a, 0X0B, 0X05, 0X0, 0X07 }; ``` This is needed, so that follow-up commits, fixing checkpatch.pl errors and warnings, won’t run into conflicts with the git commit hooks, when for example, spaces instead of tabs are used for indentation. Change-Id: If254723f3013377fb3b9b08dd5eca6b76730ec4a Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/15932 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-22lib: compile mdelay for romstagePatrick Georgi
Mimicking change I7037308d2, always compile mdelay for romstage. The boards that #included delay.c in the romstage now rely on the linker instead, which is a desirable cleanup. Change-Id: I7e5169ec94e5417536e967194e8eab67381e7c98 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13115 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-16southbridge/amd/sb600: Update HPET base address with #defineMartin Roth
The SB600 code had the base address of the HPET hardcoded throughout. It looks like the plan was to have it be updated in ACPI if needed, but this wasn't ever implemented. The variable names being used to do this update were the same, causing an IASL warning. Because of this, the operation to update the HPET address actually did nothing. This was fine, because it didn't actually need to be updated. - Replace all that code with a #define. - Add and update some comments in the same area. Fixes IASL warning: dsdt.aml 1505: Store(HPBA, HPBA) Warning 3023 - ^ Duplicate value in list (Source is the same as Target) Change-Id: I9ba5fe226a4a464e0045ce7d3406898760df5e5a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12705 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2015-12-10ACPI: Work around IASL warning reading/writing same registerMartin Roth
The newer versions of IASL are unhappy when an operator has the same object as both source and destination. The warning can be completely disabled with a command line argument, but in general, I'd really rather not just disable warnings. The bits in this register are write 1 to clear, so reading and writing the same register is what we want to do. Instead, store it in a temporary register then write it in a second operation. Fixes warning: dsdt.aml 1396: Store(PWST, PWST) Warning 3023 - ^ Duplicate value in list (Source is the same as Target) Change-Id: I52d73d4431db237be83016d67cd397f31b53d9c6 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12691 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-10ACPI: Fix IASL Warning about unused method for _OSI checkMartin Roth
According to the ACPI Spec for CondRefOf, the result argument is optional. In all of these locations, it was getting set but not used, creating a warning in new versions of IASL. Since it's an optional argument, just remove it. dsdt.aml 22: if(CondRefOf(\_OSI,Local1)) Warning 3144 - ^ Method Local is set but never used (Local1) Change-Id: I07f49ac5a3708838d1c4a7216dfb11acc415c881 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12692 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-10mainboard/**/irq_tables.c: Remove reference to getpirPatrick Georgi
The obsolete and removed getpir utility remarked in its output that the data is autogenerated. The tool was removed because it wasn't very reliable, so there's no need to point that anymore. Change-Id: I5d624931ba7872b1fefa8fa3c270ae7367e069fa Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/12354 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-11-05mainboard: Remove last_boot NVRAM optionTimothy Pearson
The last_boot NVRAM option was deprecated and removed in commit 3bfd7cc6. Remove the last_boot option from all affected mainboards to eliminate user confusion. Change-Id: I7e201b9cf21dfe5dda156785bad078524098626d Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12316 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins)
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-29mainboard: Convert #ifdef to IS_ENABLED in get_bus_conf.cTimothy Pearson
Change-Id: I254e9e9e65519edcf4d3f1ecc385af16d18c2367 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12208 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-24amd/acpi: Clean up SMBus references.Tobias Diedrich
Replace the AMD SMBus section with the equivalent SB800 smbus.asl include or remove already commented-out sections. Verified by running the cpp preprocessor over the DSDTs and diffing the results against this patch. The only change is in src/mainboard/siemens/sitemp_g1p1/dsdt.asl, where someone added RADD and SADD to the OpRegion, but those are unused, so removing them is fine. Change-Id: I074c8a1ed1c9a944d4988752bd0fc42c199c766c Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: http://review.coreboot.org/10618 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-08Remove empty lines at end of fileElyes HAOUAS
Used command line to remove empty lines at end of file: find . -type f -exec sed -i -e :a -e '/^\n*$/{$d;N;};/\n$/ba' {} \; Change-Id: I816ac9666b6dbb7c7e47843672f0d5cc499766a3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: http://review.coreboot.org/10446 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-05AMD K8 fam10: Refactor Kconfig SB_HT_CHAIN_ON_BUS0Kyösti Mälkki
If SB_HT_CHAIN_ON_BUS0 is selected, HyperTransport chain for System Bus is the first to scan and it will be assigned with bus number 0. If HT_CHAIN_DISTRIBUTE is selected, each link will reserve a fixed range of bus numbers instead of assigning consecutive numbers across all the links. All fam10 have SB_HT_CHAIN_ON_BUS0 selected under northbridge. Follow-up can easily drop this if we find this is dictated by architecture. Change-Id: I8deddcb4c3fd679b6b27e2879d9dba3895c4dd6f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8366 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-04-18kconfig: automatically include mainboardsStefan Reinauer
This change switches all mainboard vendors and mainboards to be autoincluded by Kconfig, rather than having to be mentioned explicitly. This means, vendor and mainboard directories are becoming more "drop in", e.g. be placed in the coreboot directory hierarchy without having to modify any higher level coreboot files. The long term plan is to enable out of tree mainboards / components to be built with a given coreboot version (given that the API did not change) Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Change-Id: Ib68ce1478a2e12562aeac6297128a21eb174d58a Reviewed-on: http://review.coreboot.org/9295 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-02-16acpi: Generate valid ACPI processor objectsTimothy Pearson
The existing code generated invalid ACPI processor objects if the core number was greater than 9. The first invalid object instance was autocorrected by Linux, but subsequent instances conflicted with each other, leading to a failure to boot if more than 10 CPU cores were installed. The modified code will function with up to 99 cores. Change-Id: I62dc0eb61ae2e2b7f7dcf30e9c7de09cd901a81c Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8422 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-02-16mainboard/cmos: Kill off unused boot_* parametersTimothy Pearson
Change-Id: I19d6b56e3ac5e6e7946648b97c86a223b748e3bd Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8460 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-16mainboard/cmos: Move ECC variables out of fallback mechanism byteTimothy Pearson
Change-Id: Icebc12d8f83494150a7bdd3adcc168d7b48b2e68 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8458 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-16mainboard/cmos: Delete obsolete commented parametersTimothy Pearson
Change-Id: Iccad79c142a7fcf89dd0fbebe8c07ad9ef019e91 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8459 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2015-02-15x86: Change MMIO addr in readN(addr)/writeN(addr, val) to pointerKevin Paul Herbert
On x86, change the type of the address parameter in read8()/read16/read32()/write8()/write16()/write32() to be a pointer, instead of unsigned long. Change-Id: Ic26dd8a72d82828b69be3c04944710681b7bd330 Signed-off-by: Kevin Paul Herbert <kph@meraki.net> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/7784 Tested-by: build bot (Jenkins)
2015-01-06mainboard: Drop print_ implementation from non-romcc boardsStefan Reinauer
Because we had no stack on romcc boards, we had a separate, not as powerful clone of printk: print_*. Back in the day, like more than half a decade ago, we migrated a lot of boards to printk, but we never cleaned up the existing code to be consistent. instead, we worked around the problem with a very messy console.h (nowadays the mess is hidden in romstage_console.c and early_print.h) This patch cleans up the mainboard code to use printk() on all non-ROMCC boards. Change-Id: I2383f24343fc2041fef4af65d717d754ad58425e Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/8111 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2015-01-06mainboard/*/romstage.c: Fix 'lib/delay.c' inclusionEdward O'Callaghan
Use 'delay.h' header rather than directly including 'delay.c' source. N.B. Some amdfam10 and K8 boards are not included in this changeset since unrelated issues are woven in there. Change-Id: Ibc0c0e560d8eedaf5c3150f95ba72fe5dd8d6f3a Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/8086 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-01-06mainboard/*/romstage.c: Sanitize system header inclusionsEdward O'Callaghan
Fix system include paths to be consistent. Chipset support is part of the Coreboot 'system' and hence 'non-local' (i.e., in the same directory or context). One possible product of this, is to perhaps allow future work to do pre-compiled headers (PCH) on the buildbot for faster build times. However, this currently just makes mainboard's consistent. Change-Id: I2f3fd8a3d7864926461c960ca619bff635d7dea5 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/8085 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-11-14AMD: Move RAMBASE and RAMTOPKyösti Mälkki
There are no reasons to not load ramstage @ 0x100000. Boards with HAVE_ACPI_RESUME enabled have performance penalty in using excessive RAMTOP. For these boards, this change releases 11 MiB of RAM from CBMEM allocation to OS. Change-Id: Ib71995aba5e9332d0ec1626b3eb3b4ef6a506d1c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7094 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-10-19amd: rename model_fxx_powernow to powernow.Vladimir Serbinenko
Change-Id: Iee581183f9cd9f5fecd5604536b735f6a04a0f93 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7019 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2014-10-16amdk8: Move to per-device ACPIVladimir Serbinenko
Change-Id: I485791015aa7eaabba53813945c216f5725554b1 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6948 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-10-16ACPI: Remove CONFIG_GENERATE_ACPI_TABLESVladimir Serbinenko
As currently many systems would be barely functional without ACPI, always generate ACPI tables if supported. Change-Id: I372dbd03101030c904dab153552a1291f3b63518 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4609 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-07-18mainboard: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
Change-Id: If29a70be4fb56ebb0dbf6d510412cbe2f34480ef Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6291 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-06-26AMD boards: Fix typosKyösti Mälkki
Change-Id: I92f3877b58d9acaa9578337e66107e9cd9f46043 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6110 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-06-26PIRQ tables: Fix typosKyösti Mälkki
Change-Id: I4d8abe3841378e06515e1b3a8f22d78425d08449 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6109 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-06-14amd/agesa,cimx: Rename ACPI OS detection methodsEdward O'Callaghan
Try to 'standardize' the otherwise peculiar method naming to be somewhat more in-line with other ACPI implementations. This makes it easier to compare with vendor DSDT dumps for example. Change-Id: I5ba54f7361796669ac0cab7ff91e7de43b22e846 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5888 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-05-28mainboard/*: Convert to generic ITE superio romstage componentEdward O'Callaghan
Convert mainboard's that use model specific romstage functions of it8712f to the generic framework by following the reasoning of: a7d14a1 ite/common: Introduce common watchdog and 3.3V VSB helpers Change-Id: I1485306a951103c9a4bc0dbe87c416c91f46c36f Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5737 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-05-11superio/ite/*: Factor out generic romstage componentEdward O'Callaghan
Following the reasoning of: cf7b498 superio/fintek/*: Factor out generic romstage component Change-Id: I4c0a9a5a7786eb8fcb0c3ed6251c7fe9bbbadae7 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5585 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2014-05-03Drop useless mainboard-romstage definesPatrick Georgi
Some src/mainboard/*/*/romstage.c files use defines which later modify the behaviour of included .c files. Since it's a pain to work out what is affected by these, drop values that are only defined in the board but never used, or defined to identical values as in spd.h (and use that one instead). Change-Id: I8143b26fddc32a40ac4e611a6287bf7f144267dc Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/5639 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-03Move ARCH_* from board/Kconfig to cpu or soc Kconfig.Furquan Shaikh
CONFIG_ARCH is a property of the cpu or soc rather than a property of the board. Hence, move ARCH_* from every single board to respective cpu or soc Kconfigs. Also update abuild to ignore ARCH_ from mainboards. Change-Id: I6ec1206de5a20601c32d001a384a47f46e6ce479 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5570 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-26mainboard/*: Remove DUMP_ACPI_TABLES from amd boardsEdward O'Callaghan
Dumping the ACPI tables in this way has limited use, is not likely to be used and is poorly implemented. There are much more sophisticated tools available on Linux for debugging ACPI as such this code is outside the scope of coreboots 'bring up the hardware only' philosophy. A more generic implemention could be done with hexdump() in coreboot proper following on from this cleanup. Change-Id: Ifd3bfb76338609d18fcf7158d3c9a6d7c06c8847 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5530 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-01-19board-status: Add board_info.txt extracted from wiki.Vladimir Serbinenko
board_info.txt is a file to be used by board-status to add some useful info to the generated table like flash chip type. This series is autogenerated from wiki page Supported_Motherboards. Change-Id: Ie2bda900713ef4883134477163320936c84c34f5 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4701 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-29AMD K8 (rev-F): Always have RAMINIT_SYSINFOKyösti Mälkki
K8 Rev F raminit code cannot be built without RAMINIT_SYSINFO, so have the option enabled together with K8_REV_F_SUPPORT. Also move the option under AMD K8. Change-Id: I91fa0b4ae7e3e54fbcb4a4f91eb043956cd0fb60 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4582 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-26AMD boards (non-AGESA): Cleanup post_cache_as_ram.c includesKyösti Mälkki
Change-Id: Ib3a69e3364418426438f88ba14e5cf744e2414fa Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4524 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-12-26AMD boards (non-AGESA): Cleanup earlymtrr.c includesKyösti Mälkki
Change-Id: I5f4bf9dbaf3470dc83d3e980bb6cab10801e15c1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4523 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
2013-08-16Correct spelling of shadow, setting and memoryPaul Menzel
Change-Id: Ic7d793754a8b59623b49b7a88c09b5c6b6ef2cf0 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3768 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-08-15Include boot_cpu.c for romstage buildsKyösti Mälkki
ROMCC boards were left unmodified. Change-Id: I3d842196b3f5b6999b6891b914036e9ffcc3cef0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3853 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-06-24AMD: Drop empty root_complexKyösti Mälkki
There are no files to build left under AMD nortbridge/x/root_complex directories. For some cases, even the Kconfig file was no longer sourced. Remove all such references and empty files. For devicetree.cb treat component paths with "/root_complex" in them valid even when the directory does not exists. This is because AMD boards us this dummy chip component as the root node in their devicetree.cb. The generated devicetree file static.c remains unchanged. Change-Id: I9278ebb50a83cebbf149b06afb5669899a8e4d0b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3434 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-06-23AMD boards: routing.asl: Uniformly start `Package()` with capital letterPaul Menzel
In commit Rudolf Marek discovered, that it is not uniformly written. As »ASL names are not case-sensitive and will be converted to upper case.« [2] this change does not have any functional change. The following command was used to create this patch. $ git grep -l 'package()' src/mainboard | xargs sed -i 's,package(),Package(),' [1] http://review.coreboot.org/#/c/3318/ [2] http://www.acpi.info/spec40a.htm (18.2.1 ASL Names) Change-Id: I1784dbc50936a1ef9d4376209a3c324ef1fb85cf Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3516 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-05-09AMD: Reduce stack size from 64 KB to the default of 4 KBPaul Menzel
Apply the following commit to all AMD boards. commit 935850e08293cec1cb27d12358b27285e780566a Author: Stefan Reinauer <reinauer@chromium.org> Date: Mon May 6 16:16:03 2013 -0700 asrock/e350m1: reduce default stack size The stack used on the ASRock E350M1 is significantly less than what we currently set (64k per core). In fact, we use about half of the default stack size (4k) on core 0 and even less on non BSP cores [1]: $ grep stack coreboot_without_patch_but_monotonic_timer.log CPU1: stack_base 002a0000, stack_end 002afff8 CPU1: stack: 002a0000 - 002b0000, lowest used address 002afda8, stack used: 600 bytes CPU0: stack: 002b0000 - 002c0000, lowest used address 002bf75c, stack used: 2212 bytes […] Reviewed-on: http://review.coreboot.org/3209 Please note that AGESA seems to define bigger stack sizes. But these seem to be too much too. $ git grep STACK_SIZE src/vendorcode/amd […] src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c:#define BSP_STACK_SIZE 16384 src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c:#define CORE0_STACK_SIZE 16384 src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c:#define CORE1_STACK_SIZE 4096 src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c: BSP_STACK_SIZE, src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c: CORE0_STACK_SIZE, src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c: CORE1_STACK_SIZE, […] The following command was used to create the patch. $ git grep -l STACK_SIZE src/mainboard/ | xargs sed -i '/STACK_SIZE/,+3d' Change-Id: I36b95b7a6f190b64d0639fc036ce2fb0253f3fa1 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3217 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-22x86: Unify arch/io.h and arch/romcc_io.hStefan Reinauer
Here's the great news: From now on you don't have to worry about hitting the right io.h include anymore. Just forget about romcc_io.h and use io.h instead. This cleanup has a number of advantages, like you don't have to guard device/ includes for SMM and pre RAM anymore. This allows to get rid of a number of ifdefs and will generally make the code more readable and understandable. Potentially in the future some of the code in the io.h __PRE_RAM__ path should move to device.h or other device/ includes instead, but that's another incremental change. Change-Id: I356f06110e2e355e9a5b4b08c132591f36fec7d9 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2872 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-01GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«Paul Menzel
In the file `COPYING` in the coreboot repository and upstream [1] just one space is used. The following command was used to convert all files. $ git grep -l 'MA 02' | xargs sed -i 's/MA 02/MA 02/' [1] http://www.gnu.org/licenses/gpl-2.0.txt Change-Id: Ic956dab2820a9e2ccb7841cab66966ba168f305f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2490 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-02-25AMD boards: ACPI DSDT: Use COREBOOT for the OEM Table ID fieldPaul Menzel
The DSDT header contains the fields OEMID and OEM Table ID. See for example ACPI specification 4.0a [1] 5.2.11.1 Differentiated System Description Table (DSDT) on page 135. There Table 5-16 contains the descriptions. Field Byte Length Byte Offset Description =================================================== OEMID 6 10 OEM ID OEM Table ID 8 16 The manufacture model ID. Currently in coreboot there is no common method what to put in these fields. Mostly Intel based boards populate it with "CORE " ore "COREv4" and AMD based boards populate it with the board vendor and model number, abbreviated appropriately to fit into these fields. On most boards the proprietary vendor BIOS seems to leave these fields – displayed with `sudo dmidecode` under System Information – blank To Be Filled By O.E.M. and fill out the Base Board Information with the board vendor and model name. In [2] Jens Rottmann argues that the this is really just the table ID used for naming it and that »99% of the DSDT code is not board specific«. Both approaches seem to have their advantages, but using the second one, developers often seem to forget to update them (for example AMD Thather). The current situation is at least not optimal. and therefore at least unify the string in the OEM Table ID. If unifying the OEM ID is also a good idea this should be done too. If later on it should be decided that the board vendor and model should be used again, this should be somehow derived from Kconfig. The following command was used for the change [3]. $ git grep -l '\/\* TABLE ID \*\/' | xargs sed -i '/TABLE ID/s/"\([^"]*\)"/"COREBOOT"/' This patch is split out from [2]. [1] http://www.acpi.info/spec40a.htm [2] http://review.coreboot.org/#/c/2464/ [3] http://stackoverflow.com/questions/5207838/sed-regex-matching-text-between-to-double-quotes-when-a-certain-text-appears-i Change-Id: Iec98c615ce37f928abc1b500eff5aa865d772cb2 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2472 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-25mainboard.c: Name enable_dev function uniformly `mainboard_enable`Paul Menzel
To reduce the differences between these file name the enabling device function in the directory `src/mainboard` uniformly `mainboard_enable` [1]. Thanks to the awesome help of gnomon and BlastHardcheese in the IRC channel #sed on <irc.freenode.net>. gnomon came up with the following command to do the actual work. $ cd src/mainboard $ for f in */*/mainboard.c ; \ > do src="$(awk '/\.enable_dev = /{v=$NF; sub(/,$/,"",v); print v}' "$f")" ; \ > [[ -z $src ]] && continue ; \ > printf '%s\n' "g/${src}/s/${src}\([,(]\)/mainboard_enable\1/p" w | ed -s "$f" ; \ > done `src/mainboard/digitallogic/msm586seg/mainboard.c` and `src/mainboard/technologic/ts5300/mainboard.c` had to be adapted manually as no comma was used separating the struct members. And with the following statement, gnomon is even more likable! My pleasure entirely. Good luck with coreboot; I'm a big fan of the project. [1] http://www.coreboot.org/pipermail/coreboot/2013-February/074548.html Change-Id: Ife9cd0c2d9cc1ed14afc6d40063450553f06a6c6 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2493 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-14sconfig: rename lapic_cluster -> cpu_clusterStefan Reinauer
The name lapic_cluster is a bit misleading, since the construct is not local APIC specific by concept. As implementations and hardware change, be more generic about our naming. This will allow us to support non-x86 systems without adding new keywords. Change-Id: Icd7f5fcf6f54d242eabb5e14ee151eec8d6cceb1 Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2377 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-14sconfig: rename pci_domain -> domainStefan Reinauer
The name pci_domain was a bit misleading, since the construct is only PCI specific in a particular (northbridge/cpu) implementation, but not by concept. As implementations and hardware change, be more generic about our naming. This will allow us to support non-PCI systems without adding new keywords. Change-Id: Ide885a1d5e15d37560c79b936a39252150560e85 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2376 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-28amdk8/amdfam10: Use CAR_GLOBAL for sysinfoPatrick Georgi
This gets rid of the somewhat unstructured placement of AMD's sysinfo structure in CAR. We used to carve out some CAR space using a Kconfig variable, and then put sysinfo there manually (by "virtue" of pointer magic). Now it's a variable with the CAR_GLOBAL qualifier, and build system magic. For this, the following steps were done (but must happen together since the intermediates won't build): - Add new CAR_GLOBAL sysinfo_car - point all sysinfo pointers to sysinfo_car instead of GLOBAL_VAR - remove DCACHE_RAM_GLOBAL_VAR_SIZE - from CAR setup (no need to reserve the space) - commented out code (that was commented out for years) - only copy sizeof(sysinfo) into RAM after ram init, where before it copied the whole GLOBAL_VAR area. - from Kconfig Change-Id: I3cbcccd883ca6751326c8e32afde2eb0c91229ed Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1887 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-11-27Remove AMD special case for LAPIC based udelay()Patrick Georgi
- Optionally override FSB clock detection in generic LAPIC code with constant value. - Override on AMD Model fxx, 10xxx, agesa CPUs with 200MHz - compile LAPIC code for romstage, too - Remove #include ".../apic_timer.c" in AMD based mainboards - Remove custom udelay implementation from intel northbridges' romstages Future work: - remove the compile time special case (requires some cpuid based switching) - drop northbridge udelay implementations (i945, i5000) if not required anymore (eg. can SMM use the LAPIC timer?) Change-Id: I25bacaa2163f5e96ab7f3eaf1994ab6899eff054 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1618 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-27Fix technexion tim5690 board VGA handlerStefan Reinauer
When dropping ramstage.a, unused functions with unresolved symbols are not silently dropped anymore. This makes the tim5690 compilation fail. This fix makes sure we don't compile in the int15 handler code when we don't set CONFIG_VGA_ROM_RUN Change-Id: If6872c983d9fd811eb33259421f94b551f3b9b34 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1929 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-11-24x86 realmode: Use x86emu register file + definesPatrick Georgi
By using the (global) register file as defined by x86emu, we can use the same register access for YABEL and realmode interrupt handlers. - the x86 realmode interrupt handlers changed in signature - to access registers, use X86_$REGNAME now (eg. X86_EAX) - x86_exception_handler still uses struct eregs *regs to avoid spilling the x86emu register file stuff everywhere Coccinelle script that handled most of this commit: @ inthandler @ identifier FUNC, regs; @@ int FUNC( -struct eregs *regs +void ) { ... } @ depends on inthandler @ identifier regs; @@ -regs->eax +X86_EAX @ depends on inthandler @ identifier regs; @@ -regs->ebx +X86_EBX @ depends on inthandler @ identifier regs; @@ -regs->ecx +X86_ECX @ depends on inthandler @ identifier regs; @@ -regs->edx +X86_EDX @ depends on inthandler @ identifier regs; @@ -regs->esi +X86_ESI @ depends on inthandler @ identifier regs; @@ -regs->edi +X86_EDI @ depends on inthandler @ identifier regs; @@ -regs->eflags +X86_EFLAGS @ depends on inthandler @ identifier regs; @@ -regs->vector +M.x86.intno Change-Id: I60cc2c36646fe4b7f97457b1e297e3df086daa36 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1891 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-24x86 realmode: Adapt to x86emu/YABEL style return codesPatrick Georgi
realmode int handlers must return the same codes as the YABEL int handlers now: 1 for "interrupt handled", 0 for "not handled" (ie. error). Change-Id: Idc01cf64e2c97150fc4643671a0bc4cca2ae6668 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1890 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-16Drop unneeded BOARD_HAS_FADT optionStefan Reinauer
Change-Id: Iaaeee87d70cf052bc7980007cdf1f7dda88b3623 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1836 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-16Drop CONFIG_HAVE_BUS_CONFIG, clean up KconfigStefan Reinauer
This patch is the beginning of a Kconfig cleanup series - drop CONFIG_HAVE_BUS_CONFIG and add get_bus_conf.c if it exists in the mainboard directory - drop duplicate ACPI_SSDTX_NUM from mainboard Kconfig if it only defines the defaul value of 0 - Add mptable.c, fadt.c, reset.c and ssdtX.asl when they exist, not based on some Kconfig magic Signed-off-by: Stefan Reinauer <reinauer@google.com> Change-Id: Ia14a7116dad6a724af7e531920fee9a51fd0b200 Reviewed-on: http://review.coreboot.org/1832 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-09Get rid of hard coded strings in ACPI tablesStefan Reinauer
(cosmetical) Change-Id: I3e01d8fbf2d71abcfcbe47efedd2184566c91df7 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1748 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-11-06Drop redundant CHIP_NAME in mainboard.cKyösti Mälkki
Compose the name from Kconfig strings instead. As the field is for debug print use only, a minor change in the output should do no harm. The strings no longer include word "Mainboard". Change-Id: Ifd24f408271eb5a5d1a08a317512ef00cb537ee2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1635 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-08-08Cleanup coreboot memory table includesKyösti Mälkki
The includes removed here were previously required for struct lb_memory and lb_add_memory_range(). Change-Id: Ie6c0d4ef55c2225aa709cf3fbad30ff1080e3610 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1391 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2012-08-08Drop HAVE_MAINBOARD_RESOURCESKyösti Mälkki
These existed to provide a hook to add reserved memory regions in the coreboot memory table. Reserved memory are now added as resources. Change-Id: I9f83df33845cfa6973b018a51cf9444dbf0f8667 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1414 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2012-08-07Move cpus_ready_for_init() to AMD K8Kyösti Mälkki
The function is a noop for all but amd/serengeti_cheetah. Change-Id: I09e2e710aa964c2f31e35fcea4f14856cc1e1dca Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1184 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2012-08-05Technexion TIM5690: drop add_mainboard_resources()Kyösti Mälkki
Move the POST display to take place just before jumping the payload, a bit later than before. Change-Id: Ie1d1ff24dc6c1640e25681be7dc5740943c7f112 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1396 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2012-08-02AMD and GFXUMA: move setup_uma_memory() to northbridgeKyösti Mälkki
UMA region can be determined at any time after the amount of RAM is known and before the uma_resource() call. Change-Id: I2a0bf2d3cad55ee70e889c88846f962b7faa0c7e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1379 Reviewed-by: Zheng Bao <zheng.bao@amd.com> Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-07-26Drop mainboard chip.hStefan Reinauer
mainboard_config never worked right, at least not since we've had sconfig. Hence, drop mainboard/<vendor>/<device>/chip.h and fix up the mainboards that tried to use it anyways. Change-Id: I7cd403ea188d8a9fd4c1ad15479fa88e02ab8e83 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1359 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-23AMD and GFXUMA: drop redundant use of lb_add_memory_range()Kyösti Mälkki
Use of uma_resource() in AMD northbridge code created a memory resource marked as reserved. Such resources are removed from system memory in write_coreboot_table(). Change-Id: Ib5e49e851d6622d8ece9d6d612e245b3962b9167 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1233 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2012-07-16Move setup_uma_memory() to K8 northbridgeKyösti Mälkki
These boards had identical UMA code: amd/dbm690t amd/pistachio technexion/tim5690 technexion/tim8690 The ones below had whitespace or debug level change compared to the one above: kontron/kt690 siemens/sitemp_g1p1 These boards use AMDFAM10 guidelines in code: asrock/939a785gmh amd/mahogany Change-Id: Id7c3f48035727f5847f2d7c3a6e87a3d15582003 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1210 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-16Define global uma_memory variablesKyösti Mälkki
Use of the uma_memory_base and _size variables is very scattered. Implementation of setup_uma_memory() will appear in each northbridge. It should be possible to do this setup entirely in northbridge code and get rid of the globals in a follow-up. Change-Id: I07ccd98c55a6bcaa8294ad9704b88d7afb341456 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1204 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-05-08Clean up #ifsPatrick Georgi
Replace #if CONFIG_FOO==1 with #if CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*1[[:space:]]*\$,#if \1," {} + Replace #if (CONFIG_FOO==1) with #if CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*(\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*1)[[:space:]]*\$,#if \1," {} + Replace #if CONFIG_FOO==0 with #if !CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*0[[:space:]]*\$,#if \!\1," {} + Replace #if (CONFIG_FOO==0) with #if !CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*(\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*0)[[:space:]]*\$,#if \!\1," {} + (and some manual changes to fix false positives) Change-Id: Iac6ca7605a5f99885258cf1a9a2473a92de27c42 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1004 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Martin Roth <martin@se-eng.com>
2012-04-20Refactor some alignment handlingPatrick Georgi
Made using coccinelle: @@ expression E; @@ -(E + 7) & -8 +ALIGN(E, 8) @@ expression E; @@ -(E + 15) & -16 +ALIGN(E, 16) Change-Id: I071d2c98cd95580d7de21d256c31b6368a3dc70b Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/910 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-03-08Unify Local APIC address definitionsPatrick Georgi
We used several names for that same value, and hardcoded the value at some more places. They're all LOCAL_APIC_ADDR now (except for lapic specific code that still uses LAPIC_DEFAULT_BASE). Change-Id: I1d4be73b1984f22b7e84681edfadf0588a7589b6 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/676 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-22ACPI: More ../../.. removalPatrick Georgi
CPP is ran with src/ as part of its search path, so using <northbridge/...> and the like is safe. Change-Id: I644d60190ac92ef284d5f0b4acf44f7db3c788ee Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/649 Tested-by: build bot (Jenkins)
2012-02-22amd/sb600: Move HAVE_HARD_RESET to southbridgePatrick Georgi
No in-tree board using that chipset has it not selected, so move selection from boards to southbridge. Change-Id: I16b27e40ca1a201b2f968f8ce303eaafe43804c0 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/660 Tested-by: build bot (Jenkins)
2011-10-30remove usbdebug.h include from mainboard/romstage codeSven Schnelle
No romstage is supposed to use usbdebug functions/defines directly, so remove all those includes. The usb code is now called and setup from console code. Change-Id: I9b1120d96f5993303d6b302accc86e14a91f7a9f Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/354 Tested-by: build bot (Jenkins)
2011-10-13Use default table creator macro for all SSDTsStefan Reinauer
Change-Id: I0c138ebfdc6d4d5ae7d3512b0dd68df20485690e Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/262 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-13mptable: Refactor mptable generation some morePatrick Georgi
The last couple of lines of every mptable function were mostly identical. Refactor into common code, a new function mptable_finalize. Coccinelle script: @@ identifier mc; @@ ( -mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); -mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); -printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); -return smp_next_mpe_entry(mc); +return mptable_finalize(mc); | -mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); -mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); -return smp_next_mpe_entry(mc); +return mptable_finalize(mc); ) Change-Id: Ib2270d800bdd486c5eb49b328544d36bd2298c9e Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/246 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-13mptable: Get rid of fixup_virtual_wirePatrick Georgi
As stated in some code files, fixup_virtual_wire was established to avoid touching 200 invocations of the mptable code. Let Coccinelle do it: @@ type T; identifier v; @@ -void fixup_virtual_wire(T v) -{ ... } @@ expression A; identifier v; @@ -v = smp_write_floating_table(A); +v = smp_write_floating_table(A, 0); @@ expression A; identifier v; @@ -v = smp_write_floating_table(A, 0); -fixup_virtual_wire(v); +v = smp_write_floating_table(A, 1); Change-Id: Icad8a063380bf4726be7cebb414d13b574112b14 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/245 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-04-20run uart_init() from console_init, just like the other console ↵Stefan Reinauer
initialization functions. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6531 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1