summaryrefslogtreecommitdiff
path: root/src/mainboard/system76
AgeCommit message (Collapse)Author
2023-07-03mb/system76/{adl,tgl}: Add FMD filesTim Crawford
Replace `CBFS_SIZE` with FMD files to declare regions and sizes. This will be used to lock BIOS region (except SMMSTORE) on boot. `CBFS_SIZE` was incorrectly set to 10 MiB, so this also corrects the BIOS region size to match the FIT values. Change-Id: I0f068f4d9b376f12b46faa5bb0c6a08e6cb744d8 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76155 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-07-03mb/system76: Add space for ramtop in CMOS layoutTim Crawford
Fixes building when `USE_OPTION_TABLE` is selected. Change-Id: I4fb017aa549b24eda6b9e0356bc1776d4044c95d Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76154 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-07-03mb/system76: Select CBFS SMBIOS hooksTim Crawford
Multiple users have requested to have the DMI values for product UUID and serial number be populated. Enable the drivers so that we may set them when flashing or updating firmware. Change-Id: I710363d9df626d51756a265f0099f26ef28411c2 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76153 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-07-03mb/system76: Select TPM read delay on all boardsTim Crawford
The Infineon chip occasionally fails Startup or Resume. Adding the delay makes it work more reliably. Change-Id: I4a8f98633154888e2167a3d55192b86e13ffcb62 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76095 Reviewed-by: Jeremy Soller <jeremy@system76.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-03mb/system76/adl: Remove PL4 valuesTim Crawford
System76 EC since system76/ec@99dfbeaec3b8 sets PL4 values through PECI based on AC state for all boards. Remove the static PL4 values from coreboot since they won't be used. Ref: https://github.com/system76/ec/pull/353 Change-Id: I66bc547ef1b3419fc677fcbdd5ba5d8cc8e14189 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75333 Reviewed-by: Jeremy Soller <jeremy@system76.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-03mb/system76/rpl: Add Oryx Pro 11 as a variantJeremy Soller
The Oryx Pro 11 (oryp11) is a Raptor Lake-H board. Tested with a custom TianoCore UefiPayloadPkg. Working: - PS/2 keyboard - I2C HID touchpad - Both DIMM slots - Both M.2 NVMe SSD slots - All USB ports - Webcam - Ethernet - WiFi/Bluetooth - Integrated graphics using Intel GOP driver - Internal microphone - Internal speakers - Combined headphone + mic 3.5mm audio - 3.5mm microphone input - S3 suspend/resume - Booting Pop!_OS Linux 22.04 with kernel 6.2.7 Change-Id: I0d29e03cdde523a95ae6d174a9948f4c119cca6e Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73976 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-03mb/system76/tgl-u: Enable reporting CPU C10 state over eSPIJeremy Soller
This allows the EC to detect C10 using eSPI instead of a dedicated pin. Change-Id: I58c03d91466b869d53c9ee2cbbe50adc32539494 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73689 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-03mb/system76/adl: Add Gazelle 17 as a variantJeremy Soller
The gaze17 comes in 2 variants due to differences in the discrete GPU and network controller used. - NVIDIA RTX 3050, using Realtek Ethernet Controller - NVIDIA RTX 3060, using onboard I219-V Ethernet Controller Tested with a custom TianoCore UefiPayloadPkg payload. Working: - PS/2 keyboard, touchpad - Both DIMM slots - M.2 NVMe SSD - M.2 SATA SSD - MicroSD card reader - All USB ports - Webcam - Ethernet - WiFi/Bluetooth - Integrated graphics using Intel GOP driver - Internal microphone - Internal speakers - Combined headphone + mic 3.5mm audio - 3.5mm microphone input - S0ix suspend/resume - Booting to Pop!_OS Linux 22.04 with kernel 6.2.6 - Internal flashing with flashrom v1.2-703-g76118a7c10ed Not working: - Discrete/Hybrid graphics: Requires NVIDIA driver - mDP/HDMI displays on 3060 variant: Requires NVIDIA driver - Detection of devices in TBT slot on boot - S3 suspend: MP init eventually fails Not tested: - Thunderbolt devices Change-Id: Ib12ac47e8f34004f72e6234039823530511baea7 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63990 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-03mb/system76/tgl-h: Disable D3coldTim Crawford
Disable D3cold to prevent issues with Thunderbolt not working after S3 suspend. Change-Id: Ib4362783546aa01f0f8f5baaad817ee76be9c39c Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61980 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-05-22mb/system76/rpl: Add Gazelle 18Tim Crawford
The Gazelle 18 (gaze18) is a Raptor Lake-H board. Tested with a custom TianoCore UefiPayloadPkg. Working: - PS/2 keyboard - I2C HID touchpad - Both DIMM slots - M.2 NVMe SSD slot - M.2 SATA SSD slot - All USB ports - Webcam - Ethernet - WiFi/Bluetooth - Integrated graphics using Intel GOP driver - Internal microphone - Internal speakers - Combined headphone + mic 3.5mm audio - 3.5mm microphone input - S3 suspend/resume - Booting Pop!_OS Linux 22.04 with kernel 6.2.6 Not working: - Discrete/Hybrid graphics Change-Id: I4599bf12c0f3048f9328f336cc8971400f5fd1a0 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73395 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-04-26mb/{system76,msi}: Enable PchHdaAudioLinkHdaEnable via devicetreeSean Rhodes
Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Iae2dc0a934f0ea3ca59d8a811f1daeedb090a7bd Reviewed-on: https://review.coreboot.org/c/coreboot/+/71717 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com>
2023-04-02soc/intel/alderlake: Add ADL-P 4+4 with 28W TDPPatrick Rudolph
Add the 28W TDP version of the ADL-P with MCHID 0x4629. Verified that all 28W SoCs have the same PL1/PL2 defined in Intel document #655258 "12th Generation Intel Core Processors Datasheet, Volume 1 of 2". Fixes the error seen in coreboot log: [ERROR] unknown SA ID: 0x4629, skipped power Limit Configuration Change-Id: Iad676f083dfd1cceb4df9435d467dc0f31a63f80 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74116 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
2023-03-04mb/system76/adl-p: Add Oryx Pro 10 as a variantTim Crawford
oryp10 is nearly identical to the oryp9, with the differences being: - Uses DDR5 RAM instead of DDR4 RAM - Uses Realtek ALC1306 instead of TI TAS5825M - Has an option for OLED display Change-Id: I0cf46cb5d10098dd31f0dc3c620db0c7e20ffba4 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-03-04mb/system76/adl: Add Oryx Pro 9 as a variantTim Crawford
The Oryx Pro 9 (oryp9) is an Alder Lake-P board. Tested with a custom TianoCore UefiPayloadPkg. Working: - PS/2 keyboard, touchpad - Both DIMM slots (with NMSO480E82-3200EA00) - Both M.2 NVME SSD slots (with MZVL2500HCJQ) - All USB ports - SD card reader - Webcam - Ethernet - WiFi/Bluetooth - Integrated graphics using Intel GOP driver - Internal microphone - Internal speakers - Combined headphone + mic 3.5mm audio - 3.5mm microphone input - S0ix suspend/resume - Booting Pop!_OS Linux 22.04 with kernel 6.1.11 - Internal flashing with flashrom v1.2-1203-gf4ddd3234330 Not working: - Discrete/Hybrid graphics - HDMI output (requires NVIDIA GPU) - Mini DisplayPort output (requires NVIDIA GPU) - Detection of devices in TBT slot on boot Change-Id: I8aac3e83f4423f444cb9ce8aa562ba465eb718c1 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65610 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-03-04mb/system76/adl: Add Lemur Pro 11 as a variantTim Crawford
The Lemur Pro 11 (lemp11) is an Alder Lake-U board. Tested with a custom TianoCore UefiPayloadPkg. Working: - PS/2 keyboard, touchpad - DIMM slot (with NMSO480E82-3200EA00) - M.2 NVMe SSD (with MZVL2500HCJQ) - M.2 SATA SSD (with WDS100T2B0B) - All USB ports - SD card reader - Webcam - WiFi/Bluetooth - Integrated graphics using Intel GOP driver - HDMI output - DisplayPort output over USB-C - Internal microphone - Internal speakers - Combined headset + mic 3.5mm audio - S0ix suspend/resume - Booting Pop!_OS Linux 22.04 with kernel 6.1.11 - Internal flashing with flashrom v1.2-1203-gf4ddd3234330 Not working: - On-board RAM: Requires CB:65567 - Detection of devices in TBT slot on boot Change-Id: Ic930df1ebacc8c7ef14dbb6c67a97eddb918b365 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65384 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-03-04mb/system76: Add custom backlight levels for Intel GMATim Crawford
Add custom backlight levels for all models except: - addw1/addw2: Uses an OLED display - bonw14: Does not use the iGPU Change-Id: Ibea37f19acca0d718211fc41706019a92a240c70 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61301 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-03-04mb/system76/tgl-u: Leave TBT LSX0 as FSP configuredTim Crawford
Do not reconfigured LSX0 so that the FSP values are used. Change-Id: I7ef4af2cde4f3260f2bc2efdbf85569b0eb147fb Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71666 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-03-04{ec,mb}/system76: Move smbios_system_wakeup_typeTim Crawford
Move the implementation of smbios_system_wakeup_type from the mainboards to the EC for all models that use System76 EC (everything except KBL). Change-Id: Iaace234ca87e8a05eaa006a438d2c9eb13ce4d76 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71802 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-02-28mb/system76: Rename adl-p to adlTim Crawford
The directory holds boards other than ADL-P, such as ADL-U and ADL-H. Change-Id: I8e1b67f83d649cd07645a4a519ba1bf2f6f5e7c6 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72802 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-02-19treewide: Remove useless "_STA: Status" commentElyes Haouas
Change-Id: I99ded00fa6dadb494c1523d00063dbc1fde95614 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73093 Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-17treewide: Remove unuseful "_UID: Unique ID" commentElyes Haouas
Change-Id: I150a4ed94bcaead6eb45f1c4b4952ae6957e0940 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72663 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-02-17treewide: Remove unuseful "_HID: Hardware ID" commentElyes Haouas
Change-Id: I5eb1424e9e6c1fbf20cd0bf68fbb52e1ec97f905 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72661 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-01-30mb/*: Remove lapic from devicetreeArthur Heymans
The parallel mp code picks up lapics at runtime, so remove it from all devicetrees that use this codebase. Change-Id: I5258a769c0f0ee4bbc4facc19737eed187b68c73 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69303 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2023-01-13mb/system76/adl-p: Enable AER on CPU PCIe RPTim Crawford
Tested with the following drives: - Crucial P5 Plus (CT500P5PSSD8) - Kingston KC3000 (SKC3000S/512G) - Sabrent Rocket NVMe 4.0 (SB-ROCKET-NVMEe4-500) - Samsung 970 EVO (MZ-V7E250) - Samsung 970 EVO Plus (MZ-V7S250) - Samsung 980 PRO (MZ-V8P2T0) - WD Black SN850X (WDS100T2XD0E) - WD Blue SN580 (WDS500G2B0C) - WD Green SN350 (WDS240G2G0C) Test: - Drive is functional and has no unrecoverable errors on boot - Drive is functional and has no unrecoverable errors after S0ix Change-Id: I51492c97c48f760d4aa9e4a2b2e57b0f1a06d090 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71662 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-01-13mb/system76/adl-p: Add CPU PCIe RP RTD3 configsTim Crawford
Tested with the following drives: - Crucial P5 Plus (CT500P5PSSD8) - Kingston KC3000 (SKC3000S/512G) - Sabrent Rocket NVMe 4.0 (SB-ROCKET-NVMEe4-500) - Samsung 970 EVO (MZ-V7E250) - Samsung 970 EVO Plus (MZ-V7S250) - Samsung 980 PRO (MZ-V8P2T0) - WD Black SN850X (WDS100T2XD0E) - WD Blue SN580 (WDS500G2B0C) - WD Green SN350 (WDS240G2G0C) Test: - System still asserts `SLP_S0#` during suspend (power LED blinks) - `slp_s0_residency_usec` still increases after suspend Change-Id: I919d75cb2a88c0d623c46e44c506ec2d85567995 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71661 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-01-05mb/system76/tgl-u: Add FSP-S configs per variantTim Crawford
Configure CPU PCIe RP and IOM per variant. Change-Id: I9c38af42206497dbb9436e9f2b8aff46fa4d3fb9 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71558 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2022-12-29{ec,mb}/system76/acpi: Use Printf() for debug printsFelix Singer
Change-Id: Ia5ae30a1ee976b8059936027b28ac56f37279217 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71516 Reviewed-by: Tim Crawford <tcrawford@system76.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-12-27mainboard/acpi: Replace constant "Zero" with actual numberFelix Singer
Change-Id: I4f2f02623b060ef0ebefc5aceb713c77a8b1e9a6 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71523 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-12-27mainboard/acpi: Replace constant "One" with actual numberFelix Singer
Change-Id: Id1078b14a805eea53d2a7c5a8183a5413f26e115 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71521 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-12-09mb/system76/tgl-u/Makefile.inc: Remove path to non-existent folderElyes Haouas
Found using 'Wmissing-include-dirs' command option. Change-Id: Ie0e31fcdbeb219d3ecbe14a492d3e7824f6a51cc Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70397 Reviewed-by: Tim Crawford <tcrawford@system76.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-12-02mb/system76/tgl-h: Convert oryp8 to a variantTim Crawford
Change-Id: Ied55add6d7549f165d8b97032d7f21ede0ce2dde Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67991 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2022-12-02mb/system76/adl-p: Disable SATA DevSlpTim Crawford
After changing EC detection of S0ix from CPU_C10_GATE# to SLP_S0# in system76/ec@cc3effb6a451 ("board/system76/common: use SLP_S0# pin for modern standby detection"), DevSlp blocks suspend entry. Disable it until it is fixed. Change-Id: I586245ebf9f9d5ad08f6745a450411f194a661da Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70100 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2022-12-02mb/system76/adl-p: Add Galago Pro 6 as a variantTim Crawford
The Galago Pro 6 (galp6) is an Alder Lake-P board. Tested with a custom edk2 UefiPayloadPkg. Working: - PS/2 keyboard, touchpad - Both DIMM slots (with NMSO480E82-3200EA00) - M.2 NVMe SSD (with MZVL2500HCJQ) - All USB ports - All USB ports - SD card reader - Webcam - Ethernet - WiFi/Bluetooth - Integrated graphics using Intel GOP driver - Backlight controls on Windows 10 and Linux 6.1 - HDMI output - DisplayPort output over USB-C - Internal microphone - Internal speakers - Combined headphone + mic 3.5mm audio - S0ix suspend/resume - Booting Pop!_OS Linux 22.04 with kernel 6.0.6 - Internal flashing with flashrom v1.2-1087-gde016a17 Not working: - Detection of devices in TBT slot on boot Change-Id: I8940fb3777d7f18393ef50baec32f9445b375648 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69211 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2022-12-02mb/system76/cml-u: Convert lemp9 to a variantTim Crawford
Change-Id: I13777cf6f663ca8c52a059a60cfcdfe6ecc5b9ae Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64528 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2022-11-30mb/system76: Rename gaze16 to tgl-hTim Crawford
Change-Id: Icbf9348447b9e7acc0caa8082cf5dd00853da37a Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67990 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2022-11-24mb/system76: Reset Realtek codec before configuringTim Crawford
Perform a codec reset before configuring to avoid potential issues like oryp5 had before 86f410479ca9 ("mb/system76/oryp5: Reset HDA before configuring"). Inspecting proprietary firmware for multiple boards shows that this is always done as well. Change-Id: I64c1fd23f708f77a81fad0bc889f42d4df3f6e61 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66918 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2022-11-04mb/system76/adl-p: Add Darter Pro 8Tim Crawford
The Darter Pro 8 (darp8) is an Alder Lake-P board. Tested with a custom TianoCore UefiPayloadPkg. Working: - PS/2 keyboard, touchpad - Both DIMM slots (with NMSO480E82-3200EA00) - M.2 NVMe SSD (with MZVL2500HCJQ) - M.2 SATA SSD (with WDS100T2B0B) - All USB ports - SD card reader - Webcam - Ethernet - WiFi/Bluetooth - Integrated graphics using Intel GOP driver - Backlight controls on Windows 10 and Linux 6.1 - HDMI output - DisplayPort output over USB-C - Internal microphone - Internal speakers - Combined header + mic 3.5mm audio - S0ix suspend/resume - Booting Pop!_OS Linux 22.04 with kernel 5.18.5 - Internal flashing with flashrom v1.2-703-g76118a7c10ed Not working: - Detection of devices in TBT slot on boot Change-Id: Icc84d6cc3aec7149d9b538305288bbe2b56d53e4 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65301 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-10-17mb/*/*/gpio.h: Remove unused <soc/gpe.h>Elyes Haouas
Change-Id: I9b03ccc1100307e3c24393903600d18f6cc9abdc Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68378 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com>
2022-10-11mb/system76: Set gfx registerTim Crawford
Fixes brightness controls on Windows 10. Change-Id: I33ac1b5a17c95dbb1b166c38fcd639cdac439724 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67636 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2022-10-11mb/system76: Set SMBIOS wakeup type to power switchTim Crawford
Windows hardware tests require this field not be "Reserved". The System76 EC firmware does not report the wake type, so it is not possible to know if the system was powered on from the power switch or Wake-on-LAN. In the case WoL is used, this will report the wrong value. Change-Id: I4653c6bce2a5f0a88281fc810df5646e44f90674 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66837 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2022-08-19mb/system76/gaze16: Move stray header to include folderTim Crawford
Change-Id: Id3367a708744d6a3ed0ba69ed8e0cafe0a5934b6 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66166 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-08-19mb/system76/gaze16: Configure GPIOs in mainboard_init()Tim Crawford
Configure GPIOs in `mainboard_init()` instead of during FSP config. Change-Id: Icc40ce71d2bd104c5f41e992f9b28824a3b734d6 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66169 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-19mb/system76/gaze16: Split gpio.h into data filesTim Crawford
Split `gpio.h` into `gpio_early.c` for bootblock and `gpio.c` for ramstage to match other System76 boards. Change-Id: I24398ad459754ac80d92d70687ab70b22894a01c Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66168 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-08-16mb/**/dsdt.asl: Drop misleading "OEM revision" commentAngel Pons
It is highly unlikely that the "OEM revision" of the DSDT is 0x20110725 on mainboards with a chipset not yet released on 2011-07-25. Since this comment is most likely to have been copy-pasted from other boards, drop it from boards which use a chipset newer than Sandy/Ivy Bridge. Change-Id: If2f61d09082806b461878a76b286204ae56bf0eb Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66715 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2022-08-12mb/system76/gaze16: Rename variant dirTim Crawford
Use the actual model name for the variant dir. Change-Id: I199b8efb5c3cddb8943ba4b761546caa11c67a30 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66167 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2022-08-02mb/system76: Change touchpad detection methodTim Crawford
Use the new "detect" method instead of "probed". Fixes an uncommon issue where i2c-hid fails to initialize the device on Linux. Tested on: gaze15, gaze16-3060, lemp10, oryp8 Tested: - Linux: Touchpad works across 50 reboots - Windows: Touchpad is still detected as an I2C HID device - Windows: Extra I2C HID devices are not shown in Device Manager Change-Id: I6a899c64a6d77b65a2ae57ab8df81cd84b568184 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66129 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-07-23mb/system76/tgl-u: Convert galp5 to a variantTim Crawford
Change-Id: I49185352002f6df2f9e9ab9c39d44cc9247b41b5 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64527 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-07-23mb/system76/tgl-u: Convert darp7 to a variantTim Crawford
Change-Id: I6b3fe8f4acbb5a2f9fca605e07854ebcc3f2a065 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64526 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-07-23mb/system76/tgl-u: Convert lemp10 to variant setupTim Crawford
Change-Id: I11f2ebb94b0e9a3e2c18c5b2071ccc3e03c16655 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64525 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-07-23soc/intel/cannonlake: Set MAX_CPUS based on the SoC and PCHFelix Singer
Set the default value for MAX_CPUS in the SoC config and drop it from the mainboards where it is set to those values. Change-Id: Ib56fdcfe770ef736a2c5e183481d9f9966570e6d Signed-off-by: Felix Singer <felixsinger@posteo.net> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52607 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-07-16mb/system76: Correct HID names for touchpad devicesTim Crawford
Use correct HID names instead of the CID names for the touchpad devices. Drop the now unneeded UID for the gaze15 TP devices. Tested on a gaze15 with a Synaptics device. Windows does not crash on boot and the touchpad is still detected as an I2C HID device. Change-Id: I5b6ab1a23ce667754d0c5757062385a721c5113f Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65723 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-07-16mb/system76/oryp5: Configure dGPU GPIOs in bootblockTim Crawford
Configure the dGPU power and reset pins in bootblock instead of ramstage. This fixes a conflict with our downstream driver, which configures these pins to enable dGPU power in romstage. Behavior remains unchanged without the driver as the dGPU is left powered off. Change-Id: Ica5ad5adc20fc2629d913b76a5a781fbd59a569d Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65801 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-07-16mb/system76/oryp5: Reset HDA before configuringTim Crawford
The oryp5 has several issues with audio output after a reboot: - The device is not in GNOME sound settings - The device is in GNOME sound settings, but there is no audio output - The speaker output is significantly louder than normal Reset the audio codec to resolve these issues. Tested on Pop!_OS 22.04 with Linux 5.17.15. Change-Id: I42f642820bba82142ff370930f0a25e9d1025588 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65733 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-07-16ec/system76/ec: Provide charging thresholds by defaultTim Crawford
Battery charging thresholds are a firmware implementation and not dependent on any hardware. It is expected that all boards using System76 EC firmware will select this option, so enable it by default. Leave it disabled on clevo/cml-u, which didn't have it selected. Change-Id: Id99d36eaf055a76b9e1eb732174017651de299a5 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65714 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-07-14mb/system76: TGL-U: Disable AER for CPU PCIe RPTim Crawford
Disable PCIe Advanced Error Reporting on the CPU root port to prevent some SSDs from timing out on S0ix suspend. AER results in the drive not being able to switch from D3 back to D0. nvme 0000:01:00.0: can't change power state from D3cold to D0 (config space inaccessible) Known to affect at least the following SSD models: - ADATA XPG SX8200 Pro - Samsung 970 EVO Plus (FW version: 2B7QCXE7) Change-Id: I79da6b08ef1949f3bf1c6111aaa7e658bd29c0e2 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64080 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-05-05soc/intel/tigerlake: Add enum for `DdiPortXConfig`Angel Pons
Add an enum for `DdiPortXConfig` devicetree options. Note that setting these options to zero does not disable the corresponding DDI port, but instead indicates that no LFP (Local Flat Panel, i.e. internal LCD) is connected to it. Change-Id: I9ea10141e51bf29ea44199dcd1b55b63ec771c0a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64047 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Tim Crawford <tcrawford@system76.com>
2022-05-02mb/system76: Configure I2C HID IRQs as level triggeredTim Crawford
Per Microsoft's spec for HID over I2C [1], interrupts must be level triggered. Switch GPIOs and the devicetree config to conform to this. Touchpad and multitouch gestures were already working, so no behavior changes are observed in normal use. [1]: http://download.microsoft.com/download/7/d/d/7dd44bb7-2a7a-4505-ac1c-7227d3d96d5b/hid-over-i2c-protocol-spec-v1-0.docx Change-Id: I485e616ae00e10bc3620ff3fa1fc1e903653c5cc Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61343 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2022-04-21tpm: Refactor TPM Kconfig dimensionsJes B. Klinke
Break TPM related Kconfig into the following dimensions: TPM transport support: config CRB_TPM config I2C_TPM config SPI_TPM config MEMORY_MAPPED_TPM (new) TPM brand, not defining any of these is valid, and result in "generic" support: config TPM_ATMEL (new) config TPM_GOOGLE (new) config TPM_GOOGLE_CR50 (new, implies TPM_GOOGLE) config TPM_GOOGLE_TI50 (new to be used later, implies TPM_GOOGLE) What protocol the TPM chip supports: config MAINBOARD_HAS_TPM1 config MAINBOARD_HAS_TPM2 What the user chooses to compile (restricted by the above): config NO_TPM config TPM1 config TPM2 The following Kconfigs will be replaced as indicated: config TPM_CR50 -> TPM_GOOGLE config MAINBOARD_HAS_CRB_TPM -> CRB_TPM config MAINBOARD_HAS_I2C_TPM_ATMEL -> I2C_TPM && TPM_ATMEL config MAINBOARD_HAS_I2C_TPM_CR50 -> I2C_TPM && TPM_GOOGLE config MAINBOARD_HAS_I2C_TPM_GENERIC -> I2C_TPM && !TPM_GOOGLE && !TPM_ATMEL config MAINBOARD_HAS_LPC_TPM -> MEMORY_MAPPED_TPM config MAINBOARD_HAS_SPI_TPM -> SPI_TPM && !TPM_GOOGLE && !TPM_ATMEL config MAINBOARD_HAS_SPI_TPM_CR50 -> SPI_TPM && TPM_GOOGLE Signed-off-by: Jes B. Klinke <jbk@chromium.org> Change-Id: I4656b2b90363b8dfd008dc281ad591862fe2cc9e Reviewed-on: https://review.coreboot.org/c/coreboot/+/63424 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-03-15soc/intel/tgl: move DIMM_SPD_SIZE from mb to SoC KconfigMichael Niewöhner
All TGL mainboards are setting DIMM_SPD_SIZE to 512. Thus, default to 512 in the SoC Kconfig and drop it from the mainboard Kconfigs. Change-Id: I9fd947b61c984e10bd5fba20b73280b08623a008 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62766 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-15{mb, soc}: Change `memcfg_init()` and `variant_memory_init()` prototypeSubrata Banik
This patch modifies `memcfg_init` and `variant_memory_init`functions argument from FSP_M_CONFIG to FSPM_UPD. This change in `memcfg_init()` argument will help to update the architectural FSP-M UPDs from common code blocks rather than going into SoC and/or mainboard implementation. BUG=b:200243989 BRANCH=firmware-brya-14505.B TEST=Able to build and boot redrix without any visible failure/errors. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I3002dd5c2f3703de41f38512976296f63e54d0c5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62736 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Zhuohao Lee <zhuohao@google.com>
2022-01-25mb/system76: Enable SrcClk pin for CPU PCIe RPsTim Crawford
This reverts commit bd9b044a96cc ("mb/system76: rtd3: Remove SrcClk pin on CPU RP"). Previously, RTD3 expected a PCH index for the root port and did not work with the CPU PCIe RP present on TGL, so SrcClk pin was disabled. Set them now that RTD3 supports mapping the index for the CPU RP. Change-Id: Ia7519b9f5a2be52cd5575615c28d20371a26996b Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60914 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2022-01-24mb/system76/lemp10: Remove incorrect SPD address 0x50Tim Crawford
The Lemur Pro, with its mixed memory topology, only has a DIMM at address 0x52. Change-Id: Iecea8c70c7fd40943d86f8918f8e3b384538b5c3 Fixes: 4dcee4f21db5 ("mb/system76/lemp10: Add System76 Lemur Pro 10") Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60779 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2022-01-22mb/system76/lemp9: Make GPIO for touchpad interrupt level triggeredJeremy Soller
Fixes commit 6bcaf6f (mb/system76/lemp9: Configure IRQs as level triggered for HID over I2C), which changed the interrupt configuration in the device tree but not in the GPIO definitions. Tested on a System76 Lemur Pro (lemp9), multi-touch I2C-HID was working. Signed-off-by: Jeremy Soller <jeremy@system76.com> Change-Id: I7f0559675a65453a1ad071f96049549a2dc21378 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61302 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2022-01-21mb/system76/*: Enable measured bootTim Crawford
Tested by checking PCR-2 data is recorded in cbmem log. Change-Id: I70cb9a93de44e75f3a3ed24979c243fccea1213d Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59963 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2022-01-21mb/system76/gaze15: Set _UID for touchpad devicesTim Crawford
The _UID must be unique as these devices use the same _HID. Fixes BSOD when booting Windows 10. Change-Id: I67fda892a496dc9e5a6fa5e133ff0b35cde8fce7 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2022-01-16soc/intel/skl: Replace dt `HeciEnabled` by `HECI1 disable` configSubrata Banik
List of changes: 1. Drop `HeciEnabled` from dt and dt chip configuration. 2. Replace all logic that disables HECI1 based on the `HeciEnabled` chip config with `DISABLE_HECI1_AT_PRE_BOOT` config. 3. Make dt CSE PCI device `on` by default. 4. Mainboards set DISABLE_HECI1_AT_PRE_BOOT=y to make Heci1 function disable at pre-boot instead of the dt policy that uses `HeciEnabled = 0`. Mainboards that choose to make HECI1 enable during boot don't override `heci1 disable` config. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I5c13fe4a78be44403a81c28b1676aecc26c58607 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60722 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-01-14soc/intel/tgl: Replace dt `HeciEnabled` by `HECI1 disable` configSubrata Banik
List of changes: 1. Drop `HeciEnabled` from dt and dt chip configuration. 2. Replace all logic that disables HECI1 based on the `HeciEnabled` chip config with `DISABLE_HECI1_AT_PRE_BOOT` config. Mainboards that choose to make HECI1 enable during boot don't override `heci1 disable` config. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I4a81fd58df468e2711108a3243bf116e02986316 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60730 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-01-14soc/intel/tigerlake: add devicetree option PcieRpSlotImplementedMichael Niewöhner
Add the UPD PcieRpSlotImplemented as devicetree option. To keep the PI bit set for any slots of already existing boards, add set the option PcieRpSlotImplemented=1 where appropriate. Change-Id: Ia6f685df3c22c74ae764693329a69817bf3cd01d Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60946 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-23mb: Remove dot from end of non-sentence commentPaul Menzel
Run the command below to fix all occurrences. $ git grep -l 'configuration in bootblock\. \*/' | xargs sed -i 's,configuration in bootblock\. \*/,configuration in bootblock */,' Change-Id: I84669341e2c8976953284dbaf113da3397857de3 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60248 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-12-23drivers/intel/pmc_mux/conn: Change usb{23}_port_number fields to device pointersReka Norman
Currently, the pmc_mux/conn driver uses integer fields to store the USB-2 and USB-3 port numbers from the SoC's point of view. Specifying these as integers in the devicetree is error-prone, and this information can instead be represented using pointers to the USB-2 and USB-3 devices. The port numbers can then be obtained from the paths of the linked devices, i.e. dev->path.usb.port_id. Modify the driver to store device pointers instead of integer port numbers, and update all devicetrees using the driver. These are the mainboards affected (all are Intel TGL or ADL based): google/brya google/volteer intel/adlrvp intel/shadowmountain intel/tglrvp system76/darp7 system76/galp5 system76/lemp10 Command used to update the devicetrees: git grep -l "usb._port_number" src/mainboard/ | \ xargs sed -i \ -e 's/register "usb2_port_number" = "\(.*\)"/use usb2_port\1 as usb2_port/g' \ -e 's/register "usb3_port_number" = "\(.*\)"/use tcss_usb3_port\1 as usb3_port/g' BUG=b:208502191 TEST=Build test all affected boards. On brya0, boot device and check that the ACPI tables generated with and without the change are the same. Change-Id: I5045b8ea57e8ca6f9ebd7d68a19486736b7e2809 Signed-off-by: Reka Norman <rekanorman@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60143 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-12-19mainboard: Fix comment about early GPIOsAngel Pons
These boards program the early GPIO table in bootblock, not romstage. Change-Id: Iae9353d106483f30cefa2d035d96e63e4c127261 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Sean Rhodes <admin@starlabs.systems> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-12-09soc/intel/tigerlake: Hook up DPTF device to devicetreeFelix Singer
Hook up `Device4Enable` FSP setting to devicetree state and drop its redundant devicetree setting `Device4Enable`. The following mainboards enable the DPTF device in the devicetree despite `Device4Enable` is not being set. * google/deltaur Thus, set it to off to keep the current state unchanged. Change-Id: Ic7636fc4f63d4beab92e742a6882ac55af2565bc Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59886 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-09soc/intel/tigerlake: Hook up SMBus device to devicetreeFelix Singer
Hook up `SmbusEnable` FSP setting to devicetree state and drop its redundant devicetree setting `SmbusEnable`. The following mainboards enable the SMBus device in the devicetree despite `SmbusEnable` is not being set. * google/deltaur * starlabs/laptop Thus, set it to off to keep the current state unchanged. Change-Id: I0789af20beb147fc1a6a7d046cdcea15cb44ce4c Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59883 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-23mb/system76/*: Enable dGPU temp/fan reportingTim Crawford
Select the EC option on boards with dGPUs to report GPU temperature and fan data. Tested on system76/oryp6. The GPU fan speed is reported in sensors when the system is under load. system76_acpi-acpi-0 Adapter: ACPI interface CPU fan: 1985 RPM GPU fan: 2348 RPM CPU temp: +68.0°C GPU temp: +0.0°C Change-Id: Ieb45dc277c7eb11be1c50b9a9e3e20e3a88578b7 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59123 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2021-11-23mb/system76/*: Disable IME by CMOS optionTim Crawford
Add CMOS option to set IME mode. Default to "Disable" for CNL and TGL-H, and "Enable" for TGL-U. Not set for KBL, which uses ME_CLEANER. The HECI device must be enabled in devicetree for switching modes to function correctly. Change-Id: I3163dcb0a4af020c2cf6f94f2bb26380f17c253e Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57621 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2021-11-11mb/system76/gaze16: Add System76 Gazelle 16Jeremy Soller
https://tech-docs.system76.com/models/gaze16/README.html The gaze16 comes in 3 variants due to differences in the discrete GPU and network controller used. - NVIDIA RTX 3050, using Realtek Ethernet controller - NVIDIA RTX 3060, using Realtek Ethernet controller - NVIDIA RTX 3060, using onboard Intel I219-V Ethernet controller Tested on the 3050 variant. Tested with TianoCore (UefiPayloadPkg). Working: - PS/2 keyboard, touchpad - Both DIMM slots - M.2 NVMe SSD - M.2 SATA SSD - 2.5" SSD - All USB ports - SD card reader - Webcam - Ethernet - WiFi/Bluetooth - Integrated graphics using Intel GOP driver - HDMI output - Internal microphone - Internal speakers - Combined headphone + mic 3.5mm audio* - 3.5mm microphone input* - S3 suspend/resume - Booting to Pop!_OS Linux 21.04 and Windows 10 20H2 - Flashing with flashrom Not working: - Discrete/Hybrid graphics - Mini DisplayPort output (requires NVIDIA GPU) - 3.5mm audio input/output detection on Windows Change-Id: Ifb90f9b73a10abf53a21738e2c466d539df9a37c Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56956 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-04mb/system76/*: Enable HECI deviceTim Crawford
The HECI device needs to be enabled to send the commands to have the CSME change between Soft Temporary Disable mode and Normal mode. Change-Id: I668507e3b522137bcc827aa615dab1fccd1709a0 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58670 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2021-11-02mb/system76/oryp8: Add System76 Oryx Pro 8Jeremy Soller
https://tech-docs.system76.com/models/oryp8/README.html Tested with TianoCore (UeifPayloadPkg). Working: - PS/2 keyboard, touchpad - Both DIMM slots - Both M.2 SSD slots - All USB ports - Webcam - Ethernet - WiFi/Bluetooth - Integrated graphics using Intel GOP driver - Internal microphone - Internal speakers - Combined 3.5mm headphone & microphone jack - Combined 3.5mm microphone & S/PDIF jack* - S3 suspend/resume - Booting to Pop!_OS Linux 21.10 and Windows 10 20H2 - Flashing with flashrom Not working: - Discrete/Hybrid graphics Not tested: - Thunderbolt functionality - S/PDIF output Change-Id: Iabc8e273f997d7f5852ddec63e0c1bf0c9434acb Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57652 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-11-02mb/system76/bonw14: Add System76 Bonobo Workstation 14Jeremy Soller
Change-Id: I55a827f8d6a5421c36f77049935630f4db4ba04d Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49173 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-11-02mb/system76/kbl-u: Add Galago Pro 2 as a variantJeremy Soller
Change-Id: Ia277b3ad50c9f821ab3e1dcb8327314ba955fa79 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52219 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-02mb/system76/kbl-u: Add Galago Pro 3 as a variantJeremy Soller
Change-Id: Ie203883cc9418585da4f9c7acd89e7624234caf1 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52218 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-02mb/system76/kbl-u: Add System76 Galago Pro 3 Rev BJeremy Soller
Change-Id: I25464d3a2dd02e613a8392db90b1eaf0f9b3ca70 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52217 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-11-02mb/system76/gaze15: Add Gazelle 14 as a variantTim Crawford
Change-Id: Ib455951d1d26ddfa010d4eb579905235bd1385a9 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52295 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-11-02mb/system76/gaze15: Convert to variant setupTim Crawford
Change-Id: I6d8a97d71ff3b4408f5e11230ed3ff00357f7123 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58675 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-11-02mb/system76/oryp6: Add Oryx Pro 7 as a variantJeremy Soller
Change-Id: Id00a45a6a6acf0880934c55f1a3f18e63f2aed43 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52296 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-11-02mb/system76/oryp6: Convert to variant setupTim Crawford
The Oryx Pro 6 has the same board layout as the next model in series, Oryx Pro 7. The primary difference between the two is the dGPU (20 series to 30 series). Convert oryp6 to a variant setup in preparation for adding the oryp7. Change-Id: I976750c7724d23b303d0012f2d83c21a459e5eed Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57786 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-11-02mb/system76/*: CMOS: Drop power_on_after_fail optionTim Crawford
Our boards do not boot if power_on_after_fail=Disable. Drop the option and use the default of powering on. Change-Id: Ia1857e52f838337048f79f8ca5c12d669cae321a Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58673 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2021-10-15mainboard: Drop invalid `VGA_BIOS_FILE` defaultsAngel Pons
If the VGA BIOS file path for `VGA_BIOS_FILE` in a mainboard's Kconfig does not exist in the coreboot tree (including submodules), drop it. These files should be stored in the `site-local` subdirectory and the paths specified for each board in `site-local/Kconfig`. For example: config VGA_BIOS_FILE default "site-local/x200_vbios.bin" if BOARD_LENOVO_X200 Note that this is just an example. There are better ways to structure one's `site-local` subfolder. Using the `CONFIG_MAINBOARD_DIR` option would be one of them, though variants may still need special handling. Also, update autoport to not generate `VGA_BIOS_FILE` defaults. Change-Id: I1b5dfba035a42d7943f270f95fb7d32b285584d2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51340 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-10-12soc/intel: replace dt option PmTimerDisabled by KconfigMichael Niewöhner
Replace the dt option `PmTimerDisabled` with use of the Kconfig option `USE_PM_ACPI_TIMER` for enabling/disabling the PM Timer. A default value representing the prior devicetree value was added to the boards system76/{lemp10,galp5,darp7}, so this change will not alter behaviour. Change-Id: If1811c6b98847b22272acfa35ca44f4fbca68947 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58016 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lance Zhao Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-10-09mb/system76: tgl-u: Add gfx register for GMA ACPITim Crawford
Add gfx register to System76 TGL-U boards so GMA ACPI data is generated. Change-Id: If944a90921b518efdcd5f0e0998bddb4f56e5764 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57835 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-09-27mb/system76/gaze15: Disable OC supportTim Crawford
Clevo indicated that DIMMs running at 2933 MHz are not supported on a number of processors used for this model. Change-Id: Iadf611a64de664c783696e51cfe858ca95903936 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57897 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2021-09-27mb/system76/lemp10: Use PME virtual wire for SWITim Crawford
Match the behavior of the other TGL-U boards. Change-Id: Ida962255f7a2435319d739d59eb2dc58fe342ae8 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57895 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2021-09-27mb/system76: rtd3: Remove SrcClk pin on CPU RPTim Crawford
Setting srcclk_pin only works for PCH PCIe devices. Disable them on the CPU RP and add a TODO. Change-Id: I32db116feb33a8448eb8586fe9e882b8879489d4 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57882 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2021-09-22mb/system76/addw1: Add Adder WS 2 as a variantTim Crawford
Change-Id: I3965a90151bd9250a87dabc715d68a39699ff9e1 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48422 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-22mb/system76/addw1: Add System76 Adder Workstation 1Tim Crawford
Change-Id: I5dd3bc320ca640728e1d86180c6bfa0dc7295760 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48421 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-20mb/system76/cml-u: Add Darter Pro 6 as a variantTim Crawford
Change-Id: I9ba7d2af3c9c298fda2b2997d52546cc2f702a82 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52063 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-20mb/system76/cml-u: Add System76 Galago Pro 4Tim Crawford
Change-Id: I3dfa2ab430439d8dc71531b92aa7800db94d603b Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52034 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-17mb/system76/gaze15: Correct CMOS type for debug_levelTim Crawford
When the century byte was reserved, the debug_level was accidentally converted from an enum to a hidden value. Change it back to an enum. Fixes: f05bd8830de ("mb/system76/*: cmos.layout: Reserve century byte") Change-Id: Id88a7aed7b2fc793fd003db5b45f3f201b1a7630 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57682 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2021-09-16mb/system76/darp7: Add System76 Darter Pro 7Tim Crawford
https://tech-docs.system76.com/models/darp7/README.html Tested with TianoCore (UefiPayloadPkg). Working: - PS/2 keyboard, touchpad - Both DIMM slots - M.2 NVMe SSD - M.2 SATA SSD - MicroSD card reader - All USB ports - USB-PD - Webcam - Ethernet - WiFi/Bluetooth - Integrated graphics using Intel GOP driver - HDMI output - DP over USB-C output - Internal microphone - Internal speakers - Combined 3.5mm headphone/microphone jack - S0ix suspend* - Booting to Ubuntu Linux 21.04 and Windows 10 - Flashing with flashrom Not working: - S0ix when a device is attached to the TBT port Not tested: - Thunderbolt functionality Change-Id: I80e5c5375f9d3881fc89a45a91ba68ed2e104a93 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52349 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-15mb/system76/galp5: Add System76 Galago Pro 5Tim Crawford
https://tech-docs.system76.com/models/galp5/README.html Tested with TianoCore (UefiPayloadPkg). Working: - PS/2 keyboard, touchpad - Both DIMM slots - M.2 NVMe SSD - All USB ports - SD card reader - Webcam - Ethernet - WiFi/Bluetooth - Integrated graphics using Intel GOP driver - HDMI output - Internal microphone - Internal speakers - Combined 3.5mm headphone/microphone jack - S0ix suspend* - Booting to Pop!_OS Linux 21.04 and Windows 10 - Flashing with flashrom Not working: - Discrete/Hybrid graphics - S0ix when a device is attached to the TBT port Change-Id: I0d9052c0b064d4d43812ad837578d4a097149cc8 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52350 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 20:09:34 +0000