summaryrefslogtreecommitdiff
path: root/src/mainboard/system76/whl-u
AgeCommit message (Collapse)Author
2024-07-13cfl/cml/whl mainboards: Drop superfluous cpu_cluster deviceFelix Singer
The cpu_cluster device is defined in the chipset devicetree. So drop it from the mainboards. Change-Id: I65bfeaf0b8771c123c0615531c2cc608b222949b Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83440 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-07-13mb/system76/whl-u/dt: Make use of chipset devicetreeFelix Singer
Make use of the alias names defined in the chipset devicetree and remove devices which are equal to the ones from the chipset devicetree. Change-Id: Iebe5f8729d463767f5a1b52c375d11bb9d413144 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78840 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Crawford <tcrawford@system76.com>
2024-06-07mb/**/hda_verb: Use `AZALIA_PIN_CFG_NC(0)`Angel Pons
Replace `0x411111f0` with `AZALIA_PIN_CFG_NC(0)`, which evaluates to the same value and conveys additional information to the reader. Done with a bulk search and replace operation. Change-Id: Ibd84daec017bc1ab1ee4edd906fda80231c134cc Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82394 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-06-03mb/system76: Add SPDX ID to devicetree filesTim Crawford
Change-Id: I55f2730f7277a3c699b86ded5864e9690d92d518 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82700 Reviewed-by: Jeremy Soller <jeremy@system76.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-06mb/system76: Exclude ramtop from CMOS checksumTim Crawford
Use the default position for ramtop and exclude it from the checksum. Fixes invalid checksum after caching ramtop causing things like disabling CSME to not work. Fixes: 10d2af04e754 ("mb/system76: Add space for ramtop in CMOS layout") Change-Id: If30df1e6f2735cf767856e42dfede3d17fe494eb Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81641 Reviewed-by: Jeremy Soller <jeremy@system76.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-02-18mb/*: Add SPDX headers for cmos.default filesMartin Roth
Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: Ib7beed7218f317bc2352b65a6191ef1cdaa0742d Reviewed-on: https://review.coreboot.org/c/coreboot/+/80597 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2024-02-18mb/samsung to mb/up: Add SPDX license headers to Kconfig filesMartin Roth
Change-Id: Ied455ff29b151fb5f4bca26a189b1d4104d8cede Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80595 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-01-24mb/lenovo to mb/squared: Rename Makefiles from .inc to .mkMartin Roth
The .inc suffix is confusing to various tools as it's not specific to Makefiles. This means that editors don't recognize the files, and don't open them with highlighting and any other specific editor functionality. This issue is also seen in the release notes generation script where Makefiles get renamed before running cloc. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I4790adb41cb62c8c8dd44261a2926dfb6350955a Reviewed-on: https://review.coreboot.org/c/coreboot/+/80111 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com> Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
2023-10-30mb/system76/cannonlake/dt: Use comma separated list for arraysFelix Singer
In order to improve the readability of the settings, use a comma separated list to assign values to their indexes instead of repeating the option name for each index. Don't convert the settings for PCIe root ports as they should stay in the device scope of them. While on it, remove superfluous comments related to modified lines. Change-Id: I92414efc9ddb849ceb8b9c4f0bc564bdbd92773b Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78638 Reviewed-by: Tim Crawford <tcrawford@system76.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-06mainboard: Add SPDX license headers to MakefilesMartin Roth
To help identify the licenses of the various files contained in the coreboot source, we've added SPDX headers to the top of all of the .c and .h files. This extends that practice to Makefiles. Any file in the coreboot project without a specific license is bound to the license of the overall coreboot project, GPL Version 2. This patch adds the GPL V2 license identifier to the top of all makefiles in the mainboard directory that don't already have an SPDX license line at the top. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: Ic451e68b1ad9ccdf34484dd98bd7fca7e177ef22 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68982 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2023-07-18{ec,mb}/system76: Replace color keyboard logicTim Crawford
System76 EC since system76/ec@9ac513128ad9 detects if the keyboard is white or RGB backlit via `RGBKB-DET#` at runtime. Remove the Kconfig for the selection and update the ACPI methods for the new functionality. Change-Id: I60d3d165a58e30d2afc8736c0eb64dd90c8227ca Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76152 Reviewed-by: Jeremy Soller <jeremy@system76.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-03mb/system76: Add space for ramtop in CMOS layoutTim Crawford
Fixes building when `USE_OPTION_TABLE` is selected. Change-Id: I4fb017aa549b24eda6b9e0356bc1776d4044c95d Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76154 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-07-03mb/system76: Select CBFS SMBIOS hooksTim Crawford
Multiple users have requested to have the DMI values for product UUID and serial number be populated. Enable the drivers so that we may set them when flashing or updating firmware. Change-Id: I710363d9df626d51756a265f0099f26ef28411c2 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76153 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-07-03mb/system76: Select TPM read delay on all boardsTim Crawford
The Infineon chip occasionally fails Startup or Resume. Adding the delay makes it work more reliably. Change-Id: I4a8f98633154888e2167a3d55192b86e13ffcb62 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76095 Reviewed-by: Jeremy Soller <jeremy@system76.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-04mb/system76: Add custom backlight levels for Intel GMATim Crawford
Add custom backlight levels for all models except: - addw1/addw2: Uses an OLED display - bonw14: Does not use the iGPU Change-Id: Ibea37f19acca0d718211fc41706019a92a240c70 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61301 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-03-04{ec,mb}/system76: Move smbios_system_wakeup_typeTim Crawford
Move the implementation of smbios_system_wakeup_type from the mainboards to the EC for all models that use System76 EC (everything except KBL). Change-Id: Iaace234ca87e8a05eaa006a438d2c9eb13ce4d76 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71802 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-01-30mb/*: Remove lapic from devicetreeArthur Heymans
The parallel mp code picks up lapics at runtime, so remove it from all devicetrees that use this codebase. Change-Id: I5258a769c0f0ee4bbc4facc19737eed187b68c73 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69303 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2022-12-29{ec,mb}/system76/acpi: Use Printf() for debug printsFelix Singer
Change-Id: Ia5ae30a1ee976b8059936027b28ac56f37279217 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71516 Reviewed-by: Tim Crawford <tcrawford@system76.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-24mb/system76: Reset Realtek codec before configuringTim Crawford
Perform a codec reset before configuring to avoid potential issues like oryp5 had before 86f410479ca9 ("mb/system76/oryp5: Reset HDA before configuring"). Inspecting proprietary firmware for multiple boards shows that this is always done as well. Change-Id: I64c1fd23f708f77a81fad0bc889f42d4df3f6e61 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66918 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2022-10-11mb/system76: Set SMBIOS wakeup type to power switchTim Crawford
Windows hardware tests require this field not be "Reserved". The System76 EC firmware does not report the wake type, so it is not possible to know if the system was powered on from the power switch or Wake-on-LAN. In the case WoL is used, this will report the wrong value. Change-Id: I4653c6bce2a5f0a88281fc810df5646e44f90674 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66837 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2022-08-16mb/**/dsdt.asl: Drop misleading "OEM revision" commentAngel Pons
It is highly unlikely that the "OEM revision" of the DSDT is 0x20110725 on mainboards with a chipset not yet released on 2011-07-25. Since this comment is most likely to have been copy-pasted from other boards, drop it from boards which use a chipset newer than Sandy/Ivy Bridge. Change-Id: If2f61d09082806b461878a76b286204ae56bf0eb Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66715 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2022-08-02mb/system76: Change touchpad detection methodTim Crawford
Use the new "detect" method instead of "probed". Fixes an uncommon issue where i2c-hid fails to initialize the device on Linux. Tested on: gaze15, gaze16-3060, lemp10, oryp8 Tested: - Linux: Touchpad works across 50 reboots - Windows: Touchpad is still detected as an I2C HID device - Windows: Extra I2C HID devices are not shown in Device Manager Change-Id: I6a899c64a6d77b65a2ae57ab8df81cd84b568184 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66129 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-07-16mb/system76: Correct HID names for touchpad devicesTim Crawford
Use correct HID names instead of the CID names for the touchpad devices. Drop the now unneeded UID for the gaze15 TP devices. Tested on a gaze15 with a Synaptics device. Windows does not crash on boot and the touchpad is still detected as an I2C HID device. Change-Id: I5b6ab1a23ce667754d0c5757062385a721c5113f Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65723 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-07-16ec/system76/ec: Provide charging thresholds by defaultTim Crawford
Battery charging thresholds are a firmware implementation and not dependent on any hardware. It is expected that all boards using System76 EC firmware will select this option, so enable it by default. Leave it disabled on clevo/cml-u, which didn't have it selected. Change-Id: Id99d36eaf055a76b9e1eb732174017651de299a5 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65714 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-05-02mb/system76: Configure I2C HID IRQs as level triggeredTim Crawford
Per Microsoft's spec for HID over I2C [1], interrupts must be level triggered. Switch GPIOs and the devicetree config to conform to this. Touchpad and multitouch gestures were already working, so no behavior changes are observed in normal use. [1]: http://download.microsoft.com/download/7/d/d/7dd44bb7-2a7a-4505-ac1c-7227d3d96d5b/hid-over-i2c-protocol-spec-v1-0.docx Change-Id: I485e616ae00e10bc3620ff3fa1fc1e903653c5cc Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61343 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2022-04-21tpm: Refactor TPM Kconfig dimensionsJes B. Klinke
Break TPM related Kconfig into the following dimensions: TPM transport support: config CRB_TPM config I2C_TPM config SPI_TPM config MEMORY_MAPPED_TPM (new) TPM brand, not defining any of these is valid, and result in "generic" support: config TPM_ATMEL (new) config TPM_GOOGLE (new) config TPM_GOOGLE_CR50 (new, implies TPM_GOOGLE) config TPM_GOOGLE_TI50 (new to be used later, implies TPM_GOOGLE) What protocol the TPM chip supports: config MAINBOARD_HAS_TPM1 config MAINBOARD_HAS_TPM2 What the user chooses to compile (restricted by the above): config NO_TPM config TPM1 config TPM2 The following Kconfigs will be replaced as indicated: config TPM_CR50 -> TPM_GOOGLE config MAINBOARD_HAS_CRB_TPM -> CRB_TPM config MAINBOARD_HAS_I2C_TPM_ATMEL -> I2C_TPM && TPM_ATMEL config MAINBOARD_HAS_I2C_TPM_CR50 -> I2C_TPM && TPM_GOOGLE config MAINBOARD_HAS_I2C_TPM_GENERIC -> I2C_TPM && !TPM_GOOGLE && !TPM_ATMEL config MAINBOARD_HAS_LPC_TPM -> MEMORY_MAPPED_TPM config MAINBOARD_HAS_SPI_TPM -> SPI_TPM && !TPM_GOOGLE && !TPM_ATMEL config MAINBOARD_HAS_SPI_TPM_CR50 -> SPI_TPM && TPM_GOOGLE Signed-off-by: Jes B. Klinke <jbk@chromium.org> Change-Id: I4656b2b90363b8dfd008dc281ad591862fe2cc9e Reviewed-on: https://review.coreboot.org/c/coreboot/+/63424 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-01-21mb/system76/*: Enable measured bootTim Crawford
Tested by checking PCR-2 data is recorded in cbmem log. Change-Id: I70cb9a93de44e75f3a3ed24979c243fccea1213d Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59963 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-11-23mb/system76/*: Disable IME by CMOS optionTim Crawford
Add CMOS option to set IME mode. Default to "Disable" for CNL and TGL-H, and "Enable" for TGL-U. Not set for KBL, which uses ME_CLEANER. The HECI device must be enabled in devicetree for switching modes to function correctly. Change-Id: I3163dcb0a4af020c2cf6f94f2bb26380f17c253e Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57621 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2021-11-02mb/system76/*: CMOS: Drop power_on_after_fail optionTim Crawford
Our boards do not boot if power_on_after_fail=Disable. Drop the option and use the default of powering on. Change-Id: Ia1857e52f838337048f79f8ca5c12d669cae321a Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58673 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2021-09-10cannonlake mainboards: Set PMC as hidden in devicetreeTim Wawrzynczak
FSP-S hides the PMC from the PCI bus when it runs, but there are still initialization steps coreboot programs for the PMC. Therefore, change all of the cannonlake mainboards to set the PMC as hidden in the devicetree, which means the device will be skipped during enumeration, but device callbacks are still issued as if the device were enabled. TEST=Ran full patch train on google/dratini, disassembled SSDT and the PEPD device matches what is in pep.asl. Also verified via dmesg that the INT33A1 device is still initialized by the kernel. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ib4a20ce9075ce7653388a5d3e281fe774bf89355 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56008 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-09-08mb/system76/whl-u: Add missing device nodeNico Huber
All `chip` entries need a device node below them to actually get hooked up. Add a dummy generic device like other instances of this driver use. Change-Id: Ifbb5c9a6b389a2c809ce654d584d5197af764893 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57475 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Crawford <tcrawford@system76.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-03src/*: Specify type of `DIMM_MAX` onceAngel Pons
Specify the type of the `DIMM_MAX` Kconfig symbol once. Change-Id: I2e86baaa8bd50c7b82c399fde5dcea05da6b4307 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57258 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-09-02mb/system76/*: cmos.layout: Reserve century byteTim Crawford
Windows will write to the century byte (0x32), causing the option table checksum to be invalid and reset all options to their default values. Move options and checksum to start after the century byte. Change-Id: Ia395acacda1e251251c880587bbf61d7ee81ba3d Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57055 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2021-08-28soc/intel/common: Use CHIPSET_LOCKDOWN_COREBOOT by defaultFelix Singer
Since all mainboards use `CHIPSET_LOCKDOWN_COREBOOT`, make it the default by changing its enum value to 0 and remove its configuration from all related devicetrees. If `common_soc_config.chipset_lockdown` is not configured with something else in the devicetree, then `CHIPSET_LOCKDOWN_COREBOOT` is used. Also, add a release note for the upcoming 4.15 release. Change-Id: I369f01d3da2e901e2fb57f2c83bd07380f3946a6 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56967 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-08-12mb/system76/*: Add CMOS option tableTim Crawford
System76 uses several custom CMOS values downstream. Reduce our diff by providing a generic layout with the defaults: boot_option=Fallback debug_level=Debug power_on_after_fail=Enable Tested on galp3-c, gaze15, oryp5, oryp6. All boards boot multiple times with USE_OPTION_TABLE selected. Change-Id: Ie57b0e5713bba8ad46e1a4123a3ddd43e0eea964 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56888 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-07-26mb/*: Specify type of `VARIANT_DIR` onceAngel Pons
Specify the type of the `VARIANT_DIR` Kconfig symbol once instead of doing so on each and every mainboard. Change-Id: Iea2f992a59e41e00fec3cdc9d6a13b5f3ab0a437 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56558 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/*: Specify type of `OVERRIDE_DEVICETREE` onceAngel Pons
Specify the type of the `OVERRIDE_DEVICETREE` Kconfig symbol once instead of doing so on each and every mainboard. Change-Id: I4cbf4e318a30f0cf75aa8690e7454b9caa115c9d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56556 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/*: Specify type of `MAINBOARD_PART_NUMBER` onceAngel Pons
Specify the type of the `MAINBOARD_PART_NUMBER` Kconfig symbol once instead of doing so on each and every mainboard. Change-Id: I3692f9e82fe90af4d0da1d037018a20aa1b45793 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56554 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/*: Specify type of `MAINBOARD_DIR` onceAngel Pons
Specify the type of the `MAINBOARD_DIR` Kconfig symbol once instead of doing so on each and every mainboard. Change-Id: If1cc538b0c4938dac193699897b690e402b3c1e8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56553 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26src/*: Specify type of `CBFS_SIZE` onceAngel Pons
There's no need to specify the type of the `CBFS_SIZE` Kconfig symbol more than once. This is done in `src/Kconfig`, along with its prompt. Change-Id: I9e08e23e24e372e60c32ae8cd7387ddd4b618ddc Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56552 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-29Kconfig: Escape variablesPatrick Georgi
New kconfig parsers interpret $(var) themselves, leading to empty fields. Old kconfig understands \$(var), so use that. Change-Id: I927fc9dc7a66211bfe51d4324cf7c51b555ea3a8 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55912 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-22soc/intel/cannonlake: Set DIMM_SPD_SIZE to 512Felix Singer
All related mainboards are setting DIMM_SPD_SIZE to 512. Therefore, default to 512 in the SoC Kconfig and drop it from related mainboard Kconfigs. Change-Id: Idb6a0e42961eeb490afd76b4aa7d940961991733 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52513 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-16mb/system76/whl-u: Add Darter Pro 5 variantTim Crawford
The darp5 has several GPIO differences to the galp3-c, which are already accounted for in gpio.c. Change-Id: I951e86e53e9c47b9f3038927f44e505d37200c26 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51870 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-14mb/system76/whl-u: Add System76 Galago Pro 3 Rev CTim Crawford
Tested with TianoCore payload (UefiPayloadPkg). Working: - PS/2 keyboard, touchpad - Both DIMM slots - NVMe port - SATA port - SD card slot - Left USB 3 Type-A port - Right USB 3 Type-A port - Right USB 3 Type-C port - Webcam - Ethernet - Integrated graphics using Intel GOP driver - mDP output - HDMI output - Internal microphone - Internal speakers - 3.5mm audio input - 3.5mm audio output - S3 suspend/resume - Flashing with flashrom - Booting to Ubuntu Linux 20.10 and Windows 10 Not tested: - Thunderbolt functionality Change-Id: I5c992e603dbd57ae1b4ddc3a0f9bfc92d6acc813 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51832 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 18:51:49 +0000