Age | Commit message (Collapse) | Author |
|
After CB:76315, TPM_RDRESP_NEED_DELAY, whose historical mission has
ended, could be removed.
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Change-Id: I51e046fb738d2ff7a23225739de62a1a7780bc1c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84717
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
|
|
Change-Id: I4fc824bef1daf8c12eb671c58de9019ce5a23a2e
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83575
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com>
|
|
The cpu_cluster device is defined in the chipset devicetree. So drop it
from the mainboards.
Change-Id: Ib84e7804c03f1c0779ab7053a09e397a267a3844
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83523
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace `0x411111f0` with `AZALIA_PIN_CFG_NC(0)`, which evaluates to the
same value and conveys additional information to the reader. Done with a
bulk search and replace operation.
Change-Id: Ibd84daec017bc1ab1ee4edd906fda80231c134cc
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82394
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Change-Id: I55f2730f7277a3c699b86ded5864e9690d92d518
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82700
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Commit 4c7e97b26a34 ("Update fsp submodule to upstream master branch")
included an update to the VBT from 240 to 250, breaking parsing of
existing VBTs.
After that commit, the VBT was parsed as (from gaze16-3060-b):
[DEBUG] PCI: 00:02.0 init
[INFO ] GMA: Found VBT in CBFS
[INFO ] GMA: Found valid VBT in CBFS
[INFO ] framebuffer_info: bytes_per_line: 4096, bits_per_pixel: 32
[INFO ] x_res x y_res: 1024 x 768, size: 3145728 at 0xd0000000
[DEBUG] PCI: 00:02.0 init finished in 6 msecs
When the expected output is:
[DEBUG] PCI: 00:00:02.0 init
[INFO ] GMA: Found VBT in CBFS
[INFO ] GMA: Found valid VBT in CBFS
[INFO ] framebuffer_info: bytes_per_line: 7680, bits_per_pixel: 32
[INFO ] x_res x y_res: 1920 x 1080, size: 8294400 at 0xd0000000
[DEBUG] PCI: 00:00:02.0 init finished in 6 msecs
Generate blobs for the new version using Intel Display Configuration
Tool (DisCon) v3.3, based on the existing 237 and 240 VBTs.
(For our edk2 payload, the UEFI GOP driver was updated to 17.0.1077.)
Tested on all affected systems:
- darp7
- galp5
- gaze16-3050
- gaze16-3060
- gaze16-3060-b
- lemp10
- oryp8
Tested:
- Boot splash displays on screen again
- Firmware setup menu is rendered, at correct resolution
Change-Id: I918356d9f660b985ee4408ef77544fbd071ab35f
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Tested-by: Daniel Sutton <daniel@system76.com>
Tested-by: Jacob Kauffmann <jacob@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82246
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Use the default position for ramtop and exclude it from the checksum.
Fixes invalid checksum after caching ramtop causing things like
disabling CSME to not work.
Fixes: 10d2af04e754 ("mb/system76: Add space for ramtop in CMOS layout")
Change-Id: If30df1e6f2735cf767856e42dfede3d17fe494eb
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81641
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The PcieRpEnable option is redundant to our on/off setting in the
devicetrees. Let's use the common coreboot infrastructure instead.
Thanks to Nicholas for doing all the mainboard legwork!
Change-Id: Iacfef5f032278919f1fcf49e31fa42bcbf1eaf20
Signed-off-by: Nico Huber <nico.h@gmx.de>
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79920
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ib7beed7218f317bc2352b65a6191ef1cdaa0742d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80597
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
Change-Id: Ied455ff29b151fb5f4bca26a189b1d4104d8cede
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80595
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I4790adb41cb62c8c8dd44261a2926dfb6350955a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80111
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
|
|
In order to improve the readability of the settings, use a comma
separated list to assign values to their indexes instead of repeating
the option name for each index.
Don't convert the settings for PCIe root ports as they should stay in
the device scope of them.
While on it, remove superfluous comments related to modified lines.
Change-Id: I75aeb46ea3b4a7c0a41dce375735e7b42ed59587
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78664
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Clevo had apparently swapped the Realtek card reader for the O2 Micro
card reader for newer batches of all TGL models. Enable the BayHub
driver on everything (except bonw15, which doesn't have a card reader)
to fix LTR programming, as was done for other in commit 3d7a5bdf58e0
("mb/system76: Enable DRIVERS_GENERIC_BAYHUB_LV2 to fix LTR issue").
Tested on system76/galp5: CPU reaches C-states deeper than C2 when idle.
Change-Id: I3667e08acd23c12638159a2f7d2592737a34e63d
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78298
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Clevo started using OZ711LV2 for the SD card reader around the time of
making its TGL boards. Without the driver, CPUs don't go to power states
lower than C2 due to LTR not being programmed. After enabling the driver
the CPU will go to C8 while the system is idle, giving significant power
savings if the system is left on battery power.
There is another issue with RPL where it only goes to C6 instead of C8.
This may be due to the intel_idle driver in Linux (as of 6.5-rc6
mainline and 6.4.6 stable) not supporting RPL C-states.
- tgl: Started being used with the Gazelle 3060 variant
- adl: Used on all models
- rpl: bonw15 does not have an SD card reader
Change-Id: I85c60feb6dcae7d877e70a6c6f2d3a7b3296fa0e
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77278
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This has two noticeable effects:
1. Devices populate the list much quicker while scanning.
2. Devices do not disappear and reappear from the list while scanning.
Tested on system76/lemp10.
Change-Id: I598c53805785914b4e9ae7f620e724eadbe643d4
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Tested-by: Daniel Sutton <daniel@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77047
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Report CPU C10 state over eSPI so that the EC can use Virtual Wires to
detect if PECI can be used.
Change-Id: I301361f35caee8ba1c3fd9227219603897add92b
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76910
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Do not reconfigured LSX0 so that the FSP values are used.
Change-Id: I76e2ab01a5e853e3c1ac78b471ea0aa87d703d52
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76751
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
System76 EC since system76/ec@9ac513128ad9 detects if the keyboard is
white or RGB backlit via `RGBKB-DET#` at runtime. Remove the Kconfig for
the selection and update the ACPI methods for the new functionality.
Change-Id: I60d3d165a58e30d2afc8736c0eb64dd90c8227ca
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76152
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace `CBFS_SIZE` with FMD files to declare regions and sizes. This
will be used to lock BIOS region (except SMMSTORE) on boot.
`CBFS_SIZE` was incorrectly set to 10 MiB, so this also corrects the
BIOS region size to match the FIT values.
Change-Id: I0f068f4d9b376f12b46faa5bb0c6a08e6cb744d8
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76155
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
Fixes building when `USE_OPTION_TABLE` is selected.
Change-Id: I4fb017aa549b24eda6b9e0356bc1776d4044c95d
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76154
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
Multiple users have requested to have the DMI values for product UUID
and serial number be populated. Enable the drivers so that we may set
them when flashing or updating firmware.
Change-Id: I710363d9df626d51756a265f0099f26ef28411c2
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76153
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
Disable D3cold to prevent issues with Thunderbolt not working after S3
suspend.
Change-Id: Ib4362783546aa01f0f8f5baaad817ee76be9c39c
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61980
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
Add custom backlight levels for all models except:
- addw1/addw2: Uses an OLED display
- bonw14: Does not use the iGPU
Change-Id: Ibea37f19acca0d718211fc41706019a92a240c70
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61301
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
Move the implementation of smbios_system_wakeup_type from the mainboards
to the EC for all models that use System76 EC (everything except KBL).
Change-Id: Iaace234ca87e8a05eaa006a438d2c9eb13ce4d76
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71802
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
The parallel mp code picks up lapics at runtime, so remove it from all
devicetrees that use this codebase.
Change-Id: I5258a769c0f0ee4bbc4facc19737eed187b68c73
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69303
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: Ied55add6d7549f165d8b97032d7f21ede0ce2dde
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67991
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
Change-Id: Icbf9348447b9e7acc0caa8082cf5dd00853da37a
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67990
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|