summaryrefslogtreecommitdiff
path: root/src/mainboard/system76/bonw14
AgeCommit message (Collapse)Author
2023-03-04{ec,mb}/system76: Move smbios_system_wakeup_typeTim Crawford
Move the implementation of smbios_system_wakeup_type from the mainboards to the EC for all models that use System76 EC (everything except KBL). Change-Id: Iaace234ca87e8a05eaa006a438d2c9eb13ce4d76 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71802 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-01-30mb/*: Remove lapic from devicetreeArthur Heymans
The parallel mp code picks up lapics at runtime, so remove it from all devicetrees that use this codebase. Change-Id: I5258a769c0f0ee4bbc4facc19737eed187b68c73 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69303 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2022-12-29{ec,mb}/system76/acpi: Use Printf() for debug printsFelix Singer
Change-Id: Ia5ae30a1ee976b8059936027b28ac56f37279217 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71516 Reviewed-by: Tim Crawford <tcrawford@system76.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-24mb/system76: Reset Realtek codec before configuringTim Crawford
Perform a codec reset before configuring to avoid potential issues like oryp5 had before 86f410479ca9 ("mb/system76/oryp5: Reset HDA before configuring"). Inspecting proprietary firmware for multiple boards shows that this is always done as well. Change-Id: I64c1fd23f708f77a81fad0bc889f42d4df3f6e61 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66918 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2022-10-11mb/system76: Set SMBIOS wakeup type to power switchTim Crawford
Windows hardware tests require this field not be "Reserved". The System76 EC firmware does not report the wake type, so it is not possible to know if the system was powered on from the power switch or Wake-on-LAN. In the case WoL is used, this will report the wrong value. Change-Id: I4653c6bce2a5f0a88281fc810df5646e44f90674 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66837 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2022-08-02mb/system76: Change touchpad detection methodTim Crawford
Use the new "detect" method instead of "probed". Fixes an uncommon issue where i2c-hid fails to initialize the device on Linux. Tested on: gaze15, gaze16-3060, lemp10, oryp8 Tested: - Linux: Touchpad works across 50 reboots - Windows: Touchpad is still detected as an I2C HID device - Windows: Extra I2C HID devices are not shown in Device Manager Change-Id: I6a899c64a6d77b65a2ae57ab8df81cd84b568184 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66129 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-07-23soc/intel/cannonlake: Set MAX_CPUS based on the SoC and PCHFelix Singer
Set the default value for MAX_CPUS in the SoC config and drop it from the mainboards where it is set to those values. Change-Id: Ib56fdcfe770ef736a2c5e183481d9f9966570e6d Signed-off-by: Felix Singer <felixsinger@posteo.net> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52607 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-07-16mb/system76: Correct HID names for touchpad devicesTim Crawford
Use correct HID names instead of the CID names for the touchpad devices. Drop the now unneeded UID for the gaze15 TP devices. Tested on a gaze15 with a Synaptics device. Windows does not crash on boot and the touchpad is still detected as an I2C HID device. Change-Id: I5b6ab1a23ce667754d0c5757062385a721c5113f Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65723 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-07-16ec/system76/ec: Provide charging thresholds by defaultTim Crawford
Battery charging thresholds are a firmware implementation and not dependent on any hardware. It is expected that all boards using System76 EC firmware will select this option, so enable it by default. Leave it disabled on clevo/cml-u, which didn't have it selected. Change-Id: Id99d36eaf055a76b9e1eb732174017651de299a5 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65714 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-05-02mb/system76: Configure I2C HID IRQs as level triggeredTim Crawford
Per Microsoft's spec for HID over I2C [1], interrupts must be level triggered. Switch GPIOs and the devicetree config to conform to this. Touchpad and multitouch gestures were already working, so no behavior changes are observed in normal use. [1]: http://download.microsoft.com/download/7/d/d/7dd44bb7-2a7a-4505-ac1c-7227d3d96d5b/hid-over-i2c-protocol-spec-v1-0.docx Change-Id: I485e616ae00e10bc3620ff3fa1fc1e903653c5cc Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61343 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2022-04-21tpm: Refactor TPM Kconfig dimensionsJes B. Klinke
Break TPM related Kconfig into the following dimensions: TPM transport support: config CRB_TPM config I2C_TPM config SPI_TPM config MEMORY_MAPPED_TPM (new) TPM brand, not defining any of these is valid, and result in "generic" support: config TPM_ATMEL (new) config TPM_GOOGLE (new) config TPM_GOOGLE_CR50 (new, implies TPM_GOOGLE) config TPM_GOOGLE_TI50 (new to be used later, implies TPM_GOOGLE) What protocol the TPM chip supports: config MAINBOARD_HAS_TPM1 config MAINBOARD_HAS_TPM2 What the user chooses to compile (restricted by the above): config NO_TPM config TPM1 config TPM2 The following Kconfigs will be replaced as indicated: config TPM_CR50 -> TPM_GOOGLE config MAINBOARD_HAS_CRB_TPM -> CRB_TPM config MAINBOARD_HAS_I2C_TPM_ATMEL -> I2C_TPM && TPM_ATMEL config MAINBOARD_HAS_I2C_TPM_CR50 -> I2C_TPM && TPM_GOOGLE config MAINBOARD_HAS_I2C_TPM_GENERIC -> I2C_TPM && !TPM_GOOGLE && !TPM_ATMEL config MAINBOARD_HAS_LPC_TPM -> MEMORY_MAPPED_TPM config MAINBOARD_HAS_SPI_TPM -> SPI_TPM && !TPM_GOOGLE && !TPM_ATMEL config MAINBOARD_HAS_SPI_TPM_CR50 -> SPI_TPM && TPM_GOOGLE Signed-off-by: Jes B. Klinke <jbk@chromium.org> Change-Id: I4656b2b90363b8dfd008dc281ad591862fe2cc9e Reviewed-on: https://review.coreboot.org/c/coreboot/+/63424 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-01-21mb/system76/*: Enable measured bootTim Crawford
Tested by checking PCR-2 data is recorded in cbmem log. Change-Id: I70cb9a93de44e75f3a3ed24979c243fccea1213d Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59963 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-11-23mb/system76/*: Enable dGPU temp/fan reportingTim Crawford
Select the EC option on boards with dGPUs to report GPU temperature and fan data. Tested on system76/oryp6. The GPU fan speed is reported in sensors when the system is under load. system76_acpi-acpi-0 Adapter: ACPI interface CPU fan: 1985 RPM GPU fan: 2348 RPM CPU temp: +68.0°C GPU temp: +0.0°C Change-Id: Ieb45dc277c7eb11be1c50b9a9e3e20e3a88578b7 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59123 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2021-11-23mb/system76/*: Disable IME by CMOS optionTim Crawford
Add CMOS option to set IME mode. Default to "Disable" for CNL and TGL-H, and "Enable" for TGL-U. Not set for KBL, which uses ME_CLEANER. The HECI device must be enabled in devicetree for switching modes to function correctly. Change-Id: I3163dcb0a4af020c2cf6f94f2bb26380f17c253e Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57621 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2021-11-02mb/system76/bonw14: Add System76 Bonobo Workstation 14Jeremy Soller
Change-Id: I55a827f8d6a5421c36f77049935630f4db4ba04d Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49173 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-20 04:10:53 +0000