summaryrefslogtreecommitdiff
path: root/src/mainboard/supermicro
AgeCommit message (Expand)Author
2010-04-14zero warning days. Move RAMTOP and RAMBASE together.Stefan Reinauer
2010-04-14udelay_tsc does not exist in the whole tree.Stefan Reinauer
2010-04-14drop quite a lot of dead code that did nothing but produce warnings and makeStefan Reinauer
2010-04-09Drop the need for cpu_reset, it's really just a short cut to stage2.Stefan Reinauer
2010-04-09copy_and_run.c is not needed twice, and it is used on non-car too.Stefan Reinauer
2010-04-08Clean up fidvid files using indent.Myles Watson
2010-04-08Replace dual_core and quad_core CMOS (nvram) options with multi_core. Fix so...Myles Watson
2010-04-07move amd K8/Fam10 "bus detection" function prototypes to a common place.Stefan Reinauer
2010-04-07- unify use of SB_HT_CHAIN_UNITID_OFFSET_ONLYStefan Reinauer
2010-03-31Drop \r\n and \n\r as both print_XXX and printk now do this internally.Stefan Reinauer
2010-03-31This patch drops arch/i386/lib/console.c and arch/i386/lib/console_print.c andStefan Reinauer
2010-03-30- drop unneeded Makefile.incStefan Reinauer
2010-03-30drop USE_INIT from mainboard Kconfig files, it's already set in src/KconfigStefan Reinauer
2010-03-30unify cmos.layout wrt AMD extended configuration registers.Stefan Reinauer
2010-03-29This drops the ASSEMBLY define from romstage.c, tooStefan Reinauer
2010-03-29__PRE_RAM__ is now correctly specified in the Makefile. No need to hack it intoStefan Reinauer
2010-03-29This patch drops the coreboot CMOS checksum ranges from Kconfig becauseStefan Reinauer
2010-03-29dualcore.h and quadcore.h are almost exactly the same. Stefan Reinauer
2010-03-28drop unneeded __ROMCC__ checks when the check for __PRE_RAM__ is moreStefan Reinauer
2010-03-22Fix all the format string warnings.Myles Watson
2010-03-22printk_foo -> printk(BIOS_FOO, ...)Stefan Reinauer
2010-03-18Remove remaining uses ofPatrick Georgi
2010-03-18Rework boolean expression (DeMorgan and all) forPatrick Georgi
2010-03-18Remove fallback/normal handling in mainboards'Patrick Georgi
2010-03-17Remove failover/fallback/normal handling in mainboards'Patrick Georgi
2010-03-17remove more warnings, and fix some boards (watchdog.h)Stefan Reinauer
2010-03-13Fix supermicro/h8qme_fam10 by enabling SPD ROM properly.Knut Kujat
2010-03-11Replace clear_memory with memset.Myles Watson
2010-02-28disable AP_CODE_IN_CAR. The K8 code has an alternate code path to do the job,Stefan Reinauer
2010-02-28- Add config flag for boards that have their own fadt.cPatrick Georgi
2010-02-27- make HAVE_HARD_RESET match what newconfig didPatrick Georgi
2010-02-27This does the following:Stefan Reinauer
2010-02-25drop unused fileStefan Reinauer
2010-02-25Move the ldscripts logic to src/arch/i386/Makefile.incPatrick Georgi
2010-02-25Unify crt0s setup to src/arch/i386/Makefile.inc. This variablePatrick Georgi
2010-02-24Several fixes to the supermicro/h8qme_fam10 board, so itKnut Kujat
2010-02-23Only handle code as "driver" that actually uses our driverPatrick Georgi
2010-02-15Various license header consistency fixes (trivial).Uwe Hermann
2010-02-09Move all the copies of the romstage.inc rule toPatrick Georgi
2010-02-08Clean up ACPI:Patrick Georgi
2010-02-08straighten naming scheme for application processor rom stage files.Stefan Reinauer
2010-02-08janitor task: unify and cleanup naming.Stefan Reinauer
2010-02-07newconfig is no more.Patrick Georgi
2010-02-03Supermicro H8QME-2+ (Fam10) whitespace fixes (trivial).Uwe Hermann
2010-02-03This patch adds the Supermicro H8QME-2+ (fam10) Motherboard with theKnut Kujat
2010-01-30* fix crt0s/ldscripts paths to fix out of tree build.Stefan Reinauer
2010-01-25More Kconfig changes to improve match with newconfig:Patrick Georgi
2010-01-25Align several kconfig options to match newconfig:Patrick Georgi
2010-01-18Move all IOAPIC selection to southbridges, and remove themPatrick Georgi
2010-01-06Kconfig builds all boards now.Patrick Georgi
2010-01-05* Explicitly add __PRE_RAM__ where it should be added.Stefan Reinauer
2009-12-02Trivial fixes for kconfig. They fix all non-fam10 build failures.Myles Watson
2009-11-27Eliminate special case id.inc/id.lds in favor of a configuration variable ID_...Patrick Georgi
2009-11-27Make newconfig and kconfig agree on MAINBOARD_PCI_SUBSYSTEM_{VENDOR,DEVICE}_IDPatrick Georgi
2009-11-06Remove drivers/pci/onboard. The only purpose was for option ROMs, which areMyles Watson
2009-11-06Drop all pre-CBFS rom_address entries in Config.lb/devicetree.cb.Uwe Hermann
2009-11-06Split the two usages of __ROMCC__:Myles Watson
2009-10-26Define some variables that were not defined. There are a couple left.Myles Watson
2009-10-24Major cleanups of the hard_reset() code and config in coreboot.- supermicro/x6dhe_g/auto.c
2009-10-24move all register fram definitions to arch/register.hStefan Reinauer
2009-10-23Drop dead K8_SCAN_PCI_BUS code. It's a bad idea to scan the PCI busses beforeMyles Watson
2009-10-20Remove CONFIG_CPU_AMD_FAM10 & CONFIG_CPU_AMDK8 from mainboards. They should beMyles Watson
2009-10-20Fix all board names in Kconfig as per wiki / vendor website.Uwe Hermann
2009-10-18Simplify Kconfig files by using "select" where possible (trivial).Uwe Hermann
2009-10-17Move files from src/cpu/x86/{fpu,mmx,sse}/ to x86/Peter Stuge
2009-10-16Fix AP_CODE_IN_CAR (only selected for two boards), STACK_SIZE, and HEAP_SIZE.Myles Watson
2009-10-16Drop enable_mmx.inc. It reads (only) "Enabling mmx registers is a noop"Peter Stuge
2009-10-16Set default ROM sizes per-board to match the ROM chip that cameUwe Hermann
2009-10-16Change CONFIG_LB_MEM_TOPK to CONFIG_RAMTOP to match CONFIG_RAMBASE.Myles Watson
2009-10-15Add CONFIG_GENERATE_* for tables so that the user can select which tables notMyles Watson
2009-10-11Remove useless udelay() duplication.Uwe Hermann
2009-10-09Remaining boards are Kconfig'd now. Whether they workPatrick Georgi
2009-10-07Major CONFIG_IRQ_TABLE_COUNT fixing and cleanups. Some of these boardsUwe Hermann
2009-10-07Convert all "default y" options to "select FOO" (shorter).Uwe Hermann
2009-10-07Kconfig:Patrick Georgi
2009-10-06Various fixes to Kconfig: All kconfig-boards should have aPatrick Georgi
2009-10-04This does away with CONFIG_ROM_PAYLOAD_START and CONFIG_PAYLOAD_SIZE.Patrick Georgi
2009-10-03Move HAVE_FAILOVER_BOOT and USE_FAILOVER_IMAGE fromPatrick Georgi
2009-10-03Remove:Patrick Georgi
2009-10-03Remove duplicate and not too useful Kconfig board comments asUwe Hermann
2009-09-30Add supermicro h8dmr fam10 target. This is largely a mashup of the tyan s2912Ward Vandewege
2009-09-29Fix a number of board names in Kconfig (trivial).Uwe Hermann
2009-09-29Remove MAINBOARD_OPTIONS, which is a relic from earlyPatrick Georgi
2009-09-25some progress on kconfig:Patrick Georgi
2009-09-23simplify source tree hierarchy: move files from sdram/ and ram/ to lib/Stefan Reinauer
2009-08-12Kconfig!Patrick Georgi
2009-08-11Enable CBFS everywhere. All boards compiled for me (abuild tested),Patrick Georgi
2009-07-28Fix erroneous comment in src/mainboard/h8dmr/Options.lbWard Vandewege
2009-07-02Convert Supermicro H8DMR to CBFS. Also clean up some whitespace inWard Vandewege
2009-06-30the tool chain settings should not be in renamed (as they will never live inStefan Reinauer
2009-06-30This patch unifies the use of config options in v2 to all start with CONFIG_Stefan Reinauer
2009-06-19Undo my ugly commit that added uses clauses in lots of places instead of one.Myles Watson
2009-06-17Fix configuration of boards that didn't have uses CONFIG_USE_INIT. Trivial.Myles Watson
2009-06-06When I started refactoring mainboard Config.lb, I added two differentCarl-Daniel Hailfinger
2009-06-03Revert "CMOS: Add set_option and rework get_option."Luc Verhaegen
2009-06-03CMOS: Add set_option and rework get_option.Luc Verhaegen
2009-05-22Fix MAINBOARD_PART_NUMBER to be h8dme, I forgot to change it from the h8dmrWard Vandewege
2009-05-01Trivial patch to make #defines generated from cmos.layout have unique names. ...Myles Watson
2009-04-30Refactor copy_and_run so that it uses a single code base instead ofPatrick Georgi
2009-04-28Enable HAVE_HIGH_TABLES by default for northbridges withPatrick Georgi