Age | Commit message (Expand) | Author |
2010-02-03 | This patch adds the Supermicro H8QME-2+ (fam10) Motherboard with the | Knut Kujat |
2010-01-30 | * fix crt0s/ldscripts paths to fix out of tree build. | Stefan Reinauer |
2010-01-25 | More Kconfig changes to improve match with newconfig: | Patrick Georgi |
2010-01-25 | Align several kconfig options to match newconfig: | Patrick Georgi |
2010-01-18 | Move all IOAPIC selection to southbridges, and remove them | Patrick Georgi |
2010-01-06 | Kconfig builds all boards now. | Patrick Georgi |
2010-01-05 | * Explicitly add __PRE_RAM__ where it should be added. | Stefan Reinauer |
2009-12-02 | Trivial fixes for kconfig. They fix all non-fam10 build failures. | Myles Watson |
2009-11-27 | Eliminate special case id.inc/id.lds in favor of a configuration variable ID_... | Patrick Georgi |
2009-11-27 | Make newconfig and kconfig agree on MAINBOARD_PCI_SUBSYSTEM_{VENDOR,DEVICE}_ID | Patrick Georgi |
2009-11-06 | Remove drivers/pci/onboard. The only purpose was for option ROMs, which are | Myles Watson |
2009-11-06 | Drop all pre-CBFS rom_address entries in Config.lb/devicetree.cb. | Uwe Hermann |
2009-11-06 | Split the two usages of __ROMCC__: | Myles Watson |
2009-10-26 | Define some variables that were not defined. There are a couple left. | Myles Watson |
2009-10-24 | Major cleanups of the hard_reset() code and config in coreboot. | - supermicro/x6dhe_g/auto.c |
2009-10-24 | move all register fram definitions to arch/register.h | Stefan Reinauer |
2009-10-23 | Drop dead K8_SCAN_PCI_BUS code. It's a bad idea to scan the PCI busses before | Myles Watson |
2009-10-20 | Remove CONFIG_CPU_AMD_FAM10 & CONFIG_CPU_AMDK8 from mainboards. They should be | Myles Watson |
2009-10-20 | Fix all board names in Kconfig as per wiki / vendor website. | Uwe Hermann |
2009-10-18 | Simplify Kconfig files by using "select" where possible (trivial). | Uwe Hermann |
2009-10-17 | Move files from src/cpu/x86/{fpu,mmx,sse}/ to x86/ | Peter Stuge |
2009-10-16 | Fix AP_CODE_IN_CAR (only selected for two boards), STACK_SIZE, and HEAP_SIZE. | Myles Watson |
2009-10-16 | Drop enable_mmx.inc. It reads (only) "Enabling mmx registers is a noop" | Peter Stuge |
2009-10-16 | Set default ROM sizes per-board to match the ROM chip that came | Uwe Hermann |
2009-10-16 | Change CONFIG_LB_MEM_TOPK to CONFIG_RAMTOP to match CONFIG_RAMBASE. | Myles Watson |
2009-10-15 | Add CONFIG_GENERATE_* for tables so that the user can select which tables not | Myles Watson |
2009-10-11 | Remove useless udelay() duplication. | Uwe Hermann |
2009-10-09 | Remaining boards are Kconfig'd now. Whether they work | Patrick Georgi |
2009-10-07 | Major CONFIG_IRQ_TABLE_COUNT fixing and cleanups. Some of these boards | Uwe Hermann |
2009-10-07 | Convert all "default y" options to "select FOO" (shorter). | Uwe Hermann |
2009-10-07 | Kconfig: | Patrick Georgi |
2009-10-06 | Various fixes to Kconfig: All kconfig-boards should have a | Patrick Georgi |
2009-10-04 | This does away with CONFIG_ROM_PAYLOAD_START and CONFIG_PAYLOAD_SIZE. | Patrick Georgi |
2009-10-03 | Move HAVE_FAILOVER_BOOT and USE_FAILOVER_IMAGE from | Patrick Georgi |
2009-10-03 | Remove: | Patrick Georgi |
2009-10-03 | Remove duplicate and not too useful Kconfig board comments as | Uwe Hermann |
2009-09-30 | Add supermicro h8dmr fam10 target. This is largely a mashup of the tyan s2912 | Ward Vandewege |
2009-09-29 | Fix a number of board names in Kconfig (trivial). | Uwe Hermann |
2009-09-29 | Remove MAINBOARD_OPTIONS, which is a relic from early | Patrick Georgi |
2009-09-25 | some progress on kconfig: | Patrick Georgi |
2009-09-23 | simplify source tree hierarchy: move files from sdram/ and ram/ to lib/ | Stefan Reinauer |
2009-08-12 | Kconfig! | Patrick Georgi |
2009-08-11 | Enable CBFS everywhere. All boards compiled for me (abuild tested), | Patrick Georgi |
2009-07-28 | Fix erroneous comment in src/mainboard/h8dmr/Options.lb | Ward Vandewege |
2009-07-02 | Convert Supermicro H8DMR to CBFS. Also clean up some whitespace in | Ward Vandewege |
2009-06-30 | the tool chain settings should not be in renamed (as they will never live in | Stefan Reinauer |
2009-06-30 | This patch unifies the use of config options in v2 to all start with CONFIG_ | Stefan Reinauer |
2009-06-19 | Undo my ugly commit that added uses clauses in lots of places instead of one. | Myles Watson |
2009-06-17 | Fix configuration of boards that didn't have uses CONFIG_USE_INIT. Trivial. | Myles Watson |
2009-06-06 | When I started refactoring mainboard Config.lb, I added two different | Carl-Daniel Hailfinger |
2009-06-03 | Revert "CMOS: Add set_option and rework get_option." | Luc Verhaegen |
2009-06-03 | CMOS: Add set_option and rework get_option. | Luc Verhaegen |
2009-05-22 | Fix MAINBOARD_PART_NUMBER to be h8dme, I forgot to change it from the h8dmr | Ward Vandewege |
2009-05-01 | Trivial patch to make #defines generated from cmos.layout have unique names. ... | Myles Watson |
2009-04-30 | Refactor copy_and_run so that it uses a single code base instead of | Patrick Georgi |
2009-04-28 | Enable HAVE_HIGH_TABLES by default for northbridges with | Patrick Georgi |
2009-04-28 | add_mainboard_resources is necessary for some boards (eg. kontron), but | Patrick Georgi |
2009-04-27 | Add high tables support for Supermicro H8DME. | Ward Vandewege |
2009-04-22 | Convert 12 more boards to use include statements in Config.lb. | Carl-Daniel Hailfinger |
2009-04-22 | drop duplicate compiler options that are already mentioned in CFLAGS. | Stefan Reinauer |
2009-04-22 | no duplicate names in cmos.layout allowed. (fixes a bunch of boards) | Stefan Reinauer |
2009-04-22 | This patch unifies the socket_mPGA604_800Mhz and socket_mPGA604_533Mhz to a | Stefan Reinauer |
2009-04-21 | Thanks to Myles' patch adding support for include statements, | Carl-Daniel Hailfinger |
2009-04-15 | r4097 broke the tree and it remains unfixed :-( | Stefan Reinauer |
2009-04-14 | v2/src romfs->cbfs rename | Peter Stuge |
2009-04-13 | I need to do uses HAVE_ACPI_RESUME for each board. Here we go. | Rudolf Marek |
2009-04-12 | This patch cleans up the calls to $CC in mainboard Config.lb files. They | Carl-Daniel Hailfinger |
2009-04-11 | Kill remaining unneeded CAR/ROMCC if-blocks. | Carl-Daniel Hailfinger |
2009-04-01 | Drop CONFIG_CHIP_NAME. Those config statements in Config.lb should | Stefan Reinauer |
2009-04-01 | Forgot CONFIG_ROMFS for supermicro/h8dme. | Patrick Georgi |
2009-03-31 | Add the CONFIG_ROMS config variable. | Ronald G. Minnich |
2009-03-20 | Add Supermicro h8dm3 mainboard. This is mostly a copy from the h8dmr. | Marc Jones |
2009-03-13 | This, ladies and gentlement, is commit #4000. | Stefan Reinauer |
2009-02-18 | Carl-Daniel's part: | Carl-Daniel Hailfinger |
2009-01-20 | This patch makes the recently added assembler debug optional, as it may | Stefan Reinauer |
2008-12-22 | Fix implicit declarations of get_bus_conf. | Carl-Daniel Hailfinger |
2008-12-22 | Fix implicit declarations of pci_read_config8 and pci_write_config8 in | Carl-Daniel Hailfinger |
2008-11-28 | This patch from Ralf Grosse Boerger makes debugging more comfortable. | Stefan Reinauer |
2008-10-01 | The ARRAY_SIZE macro is convenient, yet mostly unused. Switch lots of | Carl-Daniel Hailfinger |
2008-09-29 | AMD K8 platforms must use CAR so it makes sense to use the PRINK_IN_CAR | Marc Jones |
2008-09-04 | This changes the python generated makefiles | Carl-Daniel Hailfinger |
2008-01-26 | This patch fixes the remaining stack protector problem on v2. The DISTRO_CFLA... | Ronald G. Minnich |
2008-01-18 | Rename almost all occurences of LinuxBIOS to coreboot. | Stefan Reinauer |
2008-01-18 | Please bear with me - another rename checkin. This qualifies as trivial, no | Stefan Reinauer |
2007-12-30 | The following mainboards had a file named microcode_updates.c in their | Carl-Daniel Hailfinger |
2007-12-09 | This adds the same line (uses CONFIG_PRECOMPRESSED_PAYLOAD) to every | Myles Watson |
2007-12-04 | Enable vga option rom support for 1MB rom chip, which is what the h8dmr ships... | Ward Vandewege |
2007-11-07 | Add PCI IDs for most Intel southbridges of the 82801 series | Uwe Hermann |
2007-11-04 | Restructure the PCI IDs list for the ICH* chipsets from ICH/ICH0 up to | Uwe Hermann |
2007-02-27 | This is another fixup round for Yinghai Lu's great patch. | Stefan Reinauer |
2007-02-19 | Fix some CHIP_NAME() entries to use canonical names. | Uwe Hermann |
2007-02-17 | Initial support for the following new mainboards: | Yinghai Lu |
2006-12-15 | Apply linuxbios-rename-other-payload-options.patch | Ed Swierk |
2006-12-15 | Apply linuxbios-rename-compressed-payload-options.patch, refs #14 | Ed Swierk |
2006-11-10 | * fix the automatic build system by compressing payloads if possible | Stefan Reinauer |
2006-11-05 | Use the canonical name of the vendors/devices and the | Uwe Hermann |
2006-11-02 | Remove some unneeded #includes from most mainboard.c files. | Uwe Hermann |
2006-10-27 | Rename E7520 to e7520, and E7525 to e7525 in the code. The next commit | Uwe Hermann |
2006-10-27 | Fix the CHIP_NAME() entries of all mainboards to have the same format | Uwe Hermann |
2006-10-24 | Change all occurences of NSC to nsc in the code. The next commit | Uwe Hermann |