aboutsummaryrefslogtreecommitdiff
path: root/src/mainboard/supermicro
AgeCommit message (Collapse)Author
2020-02-25mb/supermicro/x11-lga1151-series: fix PNP warning for SUART1/2Michael Niewöhner
Fix PNP warning about missing devicetree entry for SUART1/2 by setting register 0xF0 to a sane (default) value. Change-Id: Ie852696aae09b9b03cebd6c3d8cbbd53a7138d89 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39094 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-02-25mb/supermicro/x11-lga1151-series: fix GPIO reset mappingMichael Niewöhner
When specifying _PAD_CFG_STRUCT with raw hex values, a logical reset value of 0x0 is only defined for GPD pads. For any other GPIOs this maps to 0x3. On the Supermicro X11 boards a value of 0x0 is set for GPP_D22 and GPP_F23, triggering the error "gpio_pad_reset_config_override: Logical to Chipset mapping not found". Set the right value (0x3<<30) for the affected GPIOs. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I3ae17dfc4d90f88f5b8bc5bee49740745778a91a Reviewed-on: https://review.coreboot.org/c/coreboot/+/39090 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-02-14mainboard/supermicro: x11ssm-f: disable SUART3/4Michael Niewöhner
SUART3/4 are unused on this board (verified by checking registers on vendor BMC firmware). Further they break the console for an unknown reason. Thus disable them. Change-Id: I30bb8184d03ee1037d9ec33eb1d93ee540563fc5 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38818 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-14mainboard/supermicro: x11ssh-tf: drop leftovers of SUART3/4Michael Niewöhner
SUART3/4 are unused on this board (verified by checking registers on vendor BMC firmware). Thus drop the remaining settings. Change-Id: I2ababd92fcd7016c508aa3119e798f75eeb90a1c Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38817 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-13mainboard/supermicro/x11-lga1151: correct board idsMichael Niewöhner
X11SSM-F has a different board id (0896) than X11SSH-TF (089C). Use the right id for the right board. Change-Id: Ib0d5e66ce1a973f29a1da78f04f7ef677b260cd8 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38834 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-01-28mainboard/supermicro/x11-lga1151-series: Disable UART3 and 4Christian Walter
With UART3 and 4 enabled, the serial console in LinuxBoot crashes. This is a short-term solution until we found and fixed the original bug. Change-Id: I75cb387ef12944232b51f6d8d41810bb27754b05 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38404 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-01-10src: Remove blank acpi_tables source filesKarthikeyan Ramasubramanian
Due to build rules, dummy acpi_tables source files were added in many mainboards. With commit 1e83e5c61a3aa98f58f7d8cbf8d1eb9532896cc3 ("src/arch/x86: Build mainboard acpi_tables source if present"), the build system will build mainboard acpi_tables only if present. Remove the dummy/empty/blank acpi_tables source files. BUG=None TEST=Build test with some google mainboards. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I0cef34368e2e5f5e3b946b22658ca10c7caad90a Reviewed-on: https://review.coreboot.org/c/coreboot/+/37854 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-01-10mb/**/devicetree.cb: Remove untrue commentsAngel Pons
Even if they were corrected, they just rephrase the code. Change-Id: Iebc4e8c9eb0f44f84acf532ad12a5d064075a102 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38047 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-01-06util/supermicro: Add and use new tool smcbiosinfoPatrick Rudolph
The BMC and tools interacting with it depend on metadata placed inside the ROM in order the flash the BIOS. Add a new tool smcbiosinfo, integrate it into the build system, and generate a 128byte metadata file called smcbiosinfo.bin on build. You need to provide the BoardID for every SMC mainboard through a new Kconfig symbol: SUPERMICRO_BOARDID Some fields are unknown, but it's sufficient to flash it using SMC vendor tools. Tested on Supermicro X11SSH: * Flashing using the WebUI works * Flashing using SMCIPMITool works No further validation is done on the firmware. Change-Id: Id608c2ce78614b45a2fd0b26d97d666f02223998 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35484 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-12-31mb/**/dsdt.asl: Remove outdated sleepstates.asl commentAngel Pons
Previously, each Intel chipset had its own sleepstates.asl file. However, this is no longer the case, so drop these comments. Change-Id: I50aba6e74f41e2fa498375b5eb6b7e993d06bcac Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37855 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-12-25mb/supermicro/x11-lga1151-series: Remove default devicetree valuesPatrick Rudolph
The same default values are used if the values are not present in devicetree. Change-Id: Ic910cdc8077e1b3e98eadc77a2d1fa0f9cb38e5b Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37467 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Michael Niewöhner
2019-12-21mb/**/dsdt.asl: Remove "Some generic macros" commentAngel Pons
It provides no useful information, so it might as well vanish. Change-Id: I0df6f4639a16058486c2e2d40fe4067d65670731 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37856 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-12-19mb/*/{BiosCallOuts,mainboard,romstage}.c: Remove unused <device/pci_{def,ops}.h>Elyes HAOUAS
Change-Id: I4dcdcb734e20830ac97d4a826de61017afc6ee67 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37688 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-11-20mb/*/*: Drop AMDFAM10 mainboardsArthur Heymans
Relocatable ramstage, postcar stage and C_ENVIRONMENT_BOOTBLOCK are now mandatory features, which this platform lacks. Change-Id: Ic00ca18de3d73a17041a3a2839307149ad7902b2 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36961 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-12mb/*: Fix default fmap with VBOOT_SLOTS_RW_A enabledPatrick Rudolph
Don't select the VBOOT fmap as default if VBOOT is disabled. Fixes a regression introduced by f8251b98 "mb/emulation/qemu: Add VBOOT support" where the default Kconfig settings wouldn't allow the qemu boards to run. Also fix the Supermicro x11-lga1151 series boards. Change-Id: I90414e2cc7e4c4a6ad67014bd4a7f9c8ff4da389 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36707 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-05mb/supermicro/x11ssh-tf: Disable i8042 supportPatrick Rudolph
Even though the vendor firmware enables the i8042 I/O port, it doesn't feed valid data to those, but instead uses USB HID devices. Disable the KBC port in SuperI/O and report no KCS port using FADT. Fixes: * Fixes error message in Linux that i8042 keyboard couldn't be enabled. Tested on Supermicro X11SSH-TF: The virtual remote managment console still works. Change-Id: I1cdf648aa5bf1d0ec48520fa1e45bdaf043cb45d Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36078 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-04soc/intel/sgx: convert SGX and PRMRR devicetree options to KconfigMichael Niewöhner
The devicetree is not made for user-choosable options, thus introduce Kconfig options for both SGX and the corresponding PRMRR size. The PRMRR size Kconfig has been implemented as a maximum value. At runtime the final PRMRR size gets selected by checking the supported values in MSR_PRMRR_VALID_CONFIG and trying to select the value nearest to the chosen one. When "Maximum" is chosen, the highest possibly value from the MSR gets used. When a too strict limit is set, coreboot will die, printing an error message. Tested successfully on X11SSM-F Change-Id: I5f08e85898304bba6680075ca5d6bce26aef9a4d Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35799 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-04sb/intel/lynxpoint: Use sb/intel/common/platform.aslArthur Heymans
Change-Id: I86260a374a3f60f16dc73573e7989f0a4ffec818 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36580 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-11-04mb/supermicro/x11-lga1151-series: drop console guard in bootblockMichael Niewöhner
To make debugging possible in a fallback setup, the serial console must be set up in bootblock, thus drop the guard. Change-Id: If0dd3c03ba52b4936eb234e6b2b61bb5ce044fcd Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36602 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-04mb/supermicro/x11-lga1151-series: use new console delay Kconfig optionMichael Niewöhner
This replaces the hardcoded delay by the new Kconfig option. Change-Id: I8bf4ef7ad9beea7b3dc22e1567623a423597eff9 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36592 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-01soc/intel/{IA-CPU/SOC}: Move sleepstates.asl into southbridge/intel/common/acpiSubrata Banik
This patch creates a common instance of sleepstates.asl inside intel common code (southbridge/intel/common/acpi) and asks all IA CPU/SOC code to refer sleepstates.asl from common code block. TEST=Able to build and boot Hatch and ICL DE system. Dump DSDT.asl to verify S0/S3/S4/S5 entries after booting to OS. Change-Id: Ie2132189f91211df74f8b5546da63ded4fdf687a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36463 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-27mb/supermicro/x11-lga1151: use the new Kconfig to hide GOPMichael Niewöhner
The board does not have any graphics port connected to the SoC. Hence, use the new Kconfig to hide GOP initialization. Change-Id: Ia88e062bea243369da27b94608f89f0808257688 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36349 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-10-27src/mainboard: change "unsigned" to "unsigned int"Martin Roth
Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I46d131f76ec930d2ef0f74e6eaabae067df10754 Reviewed-on: https://review.coreboot.org/c/coreboot/+/36330 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-10-27mb/supermicro/h8scm_fam10: Use 'Device()' instead of 'Processor()'Elyes HAOUAS
Processor() operator is deprecated, use Device() instead. Found-by: ACPICA 20191018 Change-Id: I9f6c025a548e60a91d8064b0aeaf4d8530d78305 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36311 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-10-24mb/supermicro/x11-lga1151-series: enable SLP_S0 as vendor doesMichael Niewöhner
This enables SLP_S0 for x11 boards. Change-Id: I7240ed631bf72b1d3c9ea887da43772781c80b45 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36141 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-10-23mb/supermicro/x11-lga1151-series: add x11ssm-f boardMichael Niewöhner
This adds another x11 series board, the X11SSM-F, which is similiar to X11SSH-TF but differs in PCIe interfaces/devices, GPIO settings and Ethernet interfaces. Change-Id: I24e6f0f41a844652f88b562285b26beef311a2c9 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35427 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Michael Niewöhner
2019-10-22mb/supermicro/x11-lga1151-series/x11ssh-tf: move usb to overridetreeMichael Niewöhner
Move USB ports from the common devicetree to the variants' overridetree as they differ at least for X11SSH-TF and X11SSM-F. Change-Id: I9bee3a8f6185296cadcee013a8dbe8dca256bf0b Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36139 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-10-15soc/intel/common/block/sgx: Fix crash in MP initPatrick Rudolph
On Hyper-Threading enabled platforms the MSR_PRMRR_PHYS_MASK was written when already locked by the sibling thread. In addition it loads microcode updates on all threads. To prevent such race conditions only call the code on one thread, such that the MSRs are only written once per core and the microcode is only loaded once for each core. Also add comments that describe the scope of the MSR that is being written to and mention the Intel documents used for reference. Fixes crash in SGX MP init. Tested on Supermicro X11SSH-TF. Change-Id: I7102da028a449c60ca700b3f9ccda9017aa6d6b5 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35312 Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-02soc/intel/skylake: devicetree: introduce PchHdaVcType fsp parameterMichael Niewöhner
Make the the FSP Parameter PchHdaVcType a devicetree setting and make use of it in the devicetrees of all boards that currently set it. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: Ibafc3b6bd2495658f2bd634218042ec413a89f5e Reviewed-on: https://review.coreboot.org/c/coreboot/+/35542 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2019-09-30mb/supermicro/x11-lga1151-series: x11ssh-tf: remove unneeded ACPI ifdefMichael Niewöhner
This removes the "ifdef ACPI" which is not needed here as we currently don't include gpio.h in any asl file. Change-Id: I803bbee5933eda9423a9bc9fcaea9e905e3ac78e Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35543 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-30mb/supermicro/x11-lga1151-series: fix cmos layout and add default configMichael Niewöhner
This fixes the warning that power_on_after_fail could not be found, adds a default config and adds the parameter hyper_threading. Change-Id: I10b0aa71fa7916b01e93e16cbd81e427fd14f6a4 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35526 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-27mb/supermicro/x11-lga1151-series: remove unneeded vendor id configMichael Niewöhner
The vendor id option set here is useless as most SSVID registers get filled with 0x8086 (their VID) by default, anyway. Besides that the Kconfig option isn't meant for retrofit ports, cf. commit 7e1c83e31bd (Add Kconfig options to override Subsystem Vendor and Device ID). The right place would be the devicetree. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: If67c679bb342f63096902535734106e4f1651118 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35524 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-09-26mb/supermicro: restructure x11ssh-tf to represent a x11 board seriesMichael Niewöhner
Most of the X11 boards with socket LGA1151 are basically the same boards with just some minor differences like different NICs (1 GbE, 10 GbE), number of NICs / PCIe ports etc. There are about 20 boards that can be added, if there is a community for testing. To be able to add more x11 boards easily like x11ssm (see CB:35427) this restructures the x11ssh tree to represent a "X11 LGA1151 series". There were multiple suggestions for the structure like grouping by series (x10, x11, x...), grouping by chipset or by cpu family. It turned out that there are some "X11 series" boards that are completely different. Grouping by chipset or cpu family suffers from the same problem. This is why finally we agreed on grouping by series and socket ("X11 LGA1151 series"). The structure uses the common baseboard scheme, while there is no "real" baseboard we know of. By checking images, comparing logs etc. we came to the conclusion that Supermicro does have some base layout which is only modified a bit for the different boards. X11SSH-TF was moved to the variants/ folder with it's gpio.h. As we expect the other boards to have mostly the same device tree, there is a common devicetree that gets overridden by each variant's overridetree. Besides that some very minor modifications happened (formatting, fixing comments, ...) but not much. Documentation is reworked in CB:35547 Change-Id: I8dc4240ae042760a845e890b923ad40478bb8e29 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35426 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-22mb/supermicro/x11ssh: remove unnecessary fsp setting CdClockMichael Niewöhner
CdClock does not need to be set because the board does not use IGD. Change-Id: I6835ccdf80530f9efc6fdeb0363dcf9267f99d21 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35477 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-09-20mb/supermicro/x11ssh-tf: correct CBFS_SIZEMichael Niewöhner
The specified CBFS_SIZE does not make sense. The boards BIOS region is 0xb00000. Correct the value. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: Ia3014c7fd081030607790ced6bb55323086f1161 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35458 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-18mb/supermicro/x11ssh: drop plus sign/text in nameAngel Pons
There is no board named X11SSH+-TF. Change-Id: Ide01a8d59c09747dfe7d59fd9e17bd5194fb14e4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35445 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Christian Walter <christian.walter@9elements.com>
2019-09-01mb/supermicro/x11ssh: Add Supermicro X11SSH-TFChristian Walter
Add support for the X11SSH-TF which is based on Intel KBL. Working: * SeaBIOS payload * LinuxBoot payload * IPMI of BMC * PCIe, SATA, USB and M.2 ports * RS232 serial * Native graphics init Not working: * TianoCore doesn't work yet as the Aspeed NGI is text mode only. * Intel SGX, due to random crashes in soc/intel/common For more details have a look at the documentation. Please apply those patches as well for good user experience: Ica0c20255f661dd61edc3a7d15646b7447c4658e Signed-off-by: Christian Walter <christian.walter@9elements.com> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Felix Singer <felix.singer@9elements.com> Change-Id: I2edaa4a928de3a065e517c0f20e3302b4b702323 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32734 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-08-26soc/intel: Use common romstage codeKyösti Mälkki
This provides stack guards with checking and common entry into postcar. The code in cpu/intel/car/romstage.c is candidate for becoming architectural so function prototype is moved to <arch/romstage.h>. Change-Id: I4c5a9789e7cf3f7f49a4a33e21dac894320a9639 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34893 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-18cpu/intel: Enter romstage without BISTKyösti Mälkki
When entry to romstage is via cpu/intel/car/romstage.c BIST has not been passed down the path for sometime. Change-Id: I345975c53014902269cee21fc393331d33a84dce Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34908 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-07-13intel/haswell: Replace monotonic timerKyösti Mälkki
Remove implementation of 24 MHz clock, available only on Haswell ULT SKUs. Use TSC_MONOTONIC_TIMER instead for all boards. Change-Id: Ic4aeb084d1b0913368f5eaa46e1bd68411435517 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34114 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-07-04amdfam10: Declare get_sysinfo()Kyösti Mälkki
It's forbidden to use dereference CAR_GLOBAL variables directly. The notation fails after CAR teardown for romstage. Change-Id: I6e6285ca0f520608c2a344517fbac943aeb36d87 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33995 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-04amdfam10: Declare empty activate_spd_rom() stubKyösti Mälkki
Change-Id: I1d0940a08f7ae5901b812618a6859c4297274591 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33994 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-04-25mb/supermicro/x10slm-f: Do SIO setup in bootblockTristan Corrick
Lynx Point switched to doing mainboard-specific super I/O setup in the bootblock with commit d893a2635fdd ("sb/intel/lynxpoint: Enable LPC/SIO setup in bootblock"). The X10SLM+-F was added while that commit was in review, and hence did not receive the necessary changes to SIO setup. This patch has not been tested on hardware. Change-Id: I7a648ec967dea2113cbbde1a93c1963ca6dd3c88 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32406 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-04-19src/mb/Kconfig: Fix PCI subsystem IDsElyes HAOUAS
References to MAINBOARD_PCI_SUBSYSTEM_{DEVICE_ID,VENDOR_ID} were removed in commits dbd3132 sb/intel/{i82801g/i/j,bd82x6x}: Make use of generic set_subsystem() 00bb441 sb/intel/lynxpoint: Remove PCI bridge function Change-Id: I72bba8406eea4a264e36cc9bcf467cf5cfbed379 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32107 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-20src: Use 'include <string.h>' when appropriateElyes HAOUAS
Drop 'include <string.h>' when it is not used and add it when it is missing. Also extra lines removed, or added just before local includes. Change-Id: Iccac4dbaa2dd4144fc347af36ecfc9747da3de20 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-03-08commonlib/loglevel.h: Drop unnecessary includeElyes HAOUAS
This 'include' is only needed in console/console.h file. Change-Id: Ief61106eb78d0de743c920f358937c51658c228a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31239 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-03-08coreboot: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX)Julius Werner
This patch is a raw application of find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g' Change-Id: I6262d6d5c23cabe23c242b4f38d446b74fe16b88 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-06Remove DEFAULT_PCIEXBAR aliasKyösti Mälkki
The other DEFAULT_ entries are just immediate constants. Change-Id: Iebf4266810b8210cebabc814bba2776638d9b74d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31758 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-03-05arch/io.h: Drop includes in fam10 romstagesKyösti Mälkki
These files suffer from .c includes. Change-Id: Id836595290922fcbd108a5ed576fc640b2530711 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31696 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-04device/pnp: Add header files for PNP opsKyösti Mälkki
Change-Id: Ifda495420cfb121ad32920bb9f1cbdeef41f6d3a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31698 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-04arch/io.h: Drop unnecessary includeKyösti Mälkki
Change-Id: I91158452680586ac676ea11c8589062880a31f91 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31692 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-01device/pci: Fix PCI accessor headersKyösti Mälkki
PCI config accessors are no longer indirectly included from <arch/io.h> use <device/pci_ops.h> instead. Change-Id: I2adf46430a33bc52ef69d1bf7dca4655fc8475bd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31675 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-02-11amd: Remove unused definesPeter Lemenkov
grep -ER \(FAM10_SCAN_PCI_BUS\|FAM10_ALLOCATE_IO_RANGE\) shows nothing. Change-Id: Id0d321c80a9a393fcc0d9c2a5a675dba48516160 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/31288 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-07src: Remove unused include device/pnp_def.hElyes HAOUAS
Change-Id: Ibb7ce42588510dc5ffb04c950c4c8c64e9a2fa37 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/31238 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-01-25mb/{kontron,supermicro}: Use pcidev_on_root()Elyes HAOUAS
Change-Id: I61b3e5c92830f02d61a108dadde25ff261099e57 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/31051 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2019-01-13{mb,nb,soc/fsp_baytrail}: Get rid of dump_mem()Elyes HAOUAS
Use hexdump() instead of dump_mem(). Change-Id: I7f6431bb2903a0d06f8ed0ada93aa3231a58eb6f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29853 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Guckian Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-10amdfam10 boards: Simplify early resourcemapKyösti Mälkki
Purpose of the table is to load initial address maps on PCI function 0:18.1. Provide a macro of its own so it is clear no other PCI devfn is accessed here. Change-Id: Ic146207580a5625c4f6799693157b02422bef00a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30783 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-10amdfam10 boards: Drop extern on apicid_sp5100Kyösti Mälkki
The value get_bus_conf() initialises this value to is discarded. Change-Id: I8382861574e6f8ab52839169502a5af7c3742daa Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30780 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-10mb: Move timestamp_add_now to northbridge/amd/amdfam10Elyes HAOUAS
Also remove some commented code. Change-Id: If2e91ad871b14b305e2181194d77b100e72f5763 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30771 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-09amdfam10 boards: Use smp_write_pci_intsrc()Kyösti Mälkki
Radically reduces line lengths and splits '(bus<<2) | INT' to separate parameters. Change-Id: I6c924a70d00a9139719f8078bbf1e4d04b576324 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30739 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-09mainboard/h8scm_fam10: Use apicid_sr5650Kyösti Mälkki
Do this for consistency and to ease further bulk-sed work on those lines. Change-Id: Ic9706de4278d163d1ba0c0706ec5d4c6c87ffa45 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30738 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-09amdfam10 boards: Use PCI_DEVFN()Kyösti Mälkki
Change-Id: I7b9aeaaa1cfa20efc9d187d91ece4eb9ee659c3f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30737 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-06device: Use pcidev_on_root()Kyösti Mälkki
Change-Id: Icf34b39d80f6e46d32a39b68f38fb2752c0bcebc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/26484 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Piotr Król <piotr.krol@3mdeb.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-04amdfam10 boards: Use defaults for get_pci1234()Kyösti Mälkki
Note that while these boards had entry 0x0ff0 in comparison to 0x0ffc of the get_default_pci1234() initialisation, the implementation of get_pci1234() unconditionally overrides the first entry. Change-Id: I8bec612f84fe3c3a0c21fc1e10629368857e9c5e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30649 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Use defaults for get_pci1234()Kyösti Mälkki
All these boards use the same default initialiser. As this is initialized late after device enumeration, it can't really be used to alter platform configuration. Change-Id: I30fc0298081df0442ec4e9a527340b93a3cd6106 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30648 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Drop array bus_sp5100Kyösti Mälkki
Only bus_sp5100[0] is evaluated. Change-Id: I42a5040ea70a84fb674f2c616c6eba7b23dcdc29 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30645 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Use PCI_DEVFN()Kyösti Mälkki
Change-Id: I301ed4024f1dd6fb2009d59b2992830d4f17ee2f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30639 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Drop const variable sbdn_sp5100Kyösti Mälkki
Change-Id: I8756a81324ba3d4374bb6b06f7f0ddade6ba530f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30636 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Drop variable sbdn_sr5650Kyösti Mälkki
It mirrors value of sysconf.sbdn. Change-Id: I3ea42280a1bdceffebb6b5c85aee18347734ee4e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30635 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Drop extern on bus_sr5650 and sbdn_sr5650Kyösti Mälkki
Change-Id: I3b95ec5746077b49cd6dca64d0f884a3d1c362fb Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30634 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Drop extern on bus_rs780 and sbdn_rs780Kyösti Mälkki
Change-Id: I7dc943f3376e9b706d3d486231525df85f806858 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30631 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Call get_bus_conf() just onceKyösti Mälkki
It has to be called once before PIRQ and MP table generation. Change-Id: I238c6b4810404d320b36d4f6b4a161c1ff11c8d3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30630 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Add Makefiles and fix resourcemap.cKyösti Mälkki
Also remove global ramstage-y += get_bus_conf.c, this is specific to amdfam10. Change-Id: I49b604ebff6bcfe85518b2c3896ab798c3c7878d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30629 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Drop global bus_isa variableKyösti Mälkki
Value of the global is never evaluated. Change-Id: I74106b0f5f033053288882a5bcd3c1dba3235ac0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30628 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Declare get_pci1234() just onceKyösti Mälkki
Change-Id: I68bb9c4301c846fe2270cd7c434f35a79ab25572 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30627 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-12-29mainboard: Add Supermicro X10SLM+-FTristan Corrick
This board runs well with coreboot. The documentation part of this commit lists what works and what doesn't. Tested with GRUB 2.02 as a payload, loading SeaBIOS 1.12.0 which then boots FreeBSD 11.2. It has also been tested with GRUB directly booting Debian GNU/Linux 9.6 (kernel 4.9). Change-Id: I291573d4651bdffe24eb841033ea6189fcbf8502 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/c/30357 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-12-19mainboard: Remove useless include <device/pci_ids.h>Elyes HAOUAS
Change-Id: I4ee3cc42302c44dc80ae1f285579a4d1775aec16 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30199 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-11-28mb/*/*/Kconfig: Remove useless commentElyes HAOUAS
Change-Id: Ibdff50761a205d936b0ebe067f418be0a2051798 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29871 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hellsenberg <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: David Guckian Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-11-23mb: Set coreboot as DSDT's manufacturer model IDElyes HAOUAS
Field 'OEMID' & "OEM Table ID" are related to DSDT table not to mainboard. So use macro to set them respectvely to "COREv4" and "COREBOOT". Change-Id: I060e07a730e721df4a86128ee89bfe168c69f31e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29790 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: David Guckian
2018-11-16src: Remove unneeded include <lib.h>Elyes HAOUAS
Change-Id: I801849fb31fe6958e3d9510da50e2e2dd351a98d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29304 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-16src: Get rid of duplicated includesElyes HAOUAS
Change-Id: I252a1cd77bf647477edb7dddadb7e527de872439 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29582 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-11-12src: Remove unneeded include "{arch,cpu}/cpu.h"Elyes HAOUAS
Change-Id: I17c4fc4e3e2eeef7c720c6a020b37d8f7a0f57a4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29300 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-05mainboard: Remove unneeded include <console/console.h>Elyes HAOUAS
Change-Id: Ib3aafcc586b1631a75f214cfd19706108ad8ca93 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29285 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-31reset: Finalize move to new APINico Huber
Move soft_reset() to `southbridge/amd/common/` it's only used for amdfam10 now. Drop hard_reset() for good. Change-Id: Ifdc5791160653c5578007f6c1b96015efe2b3e1e Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29059 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-23src: Remove unneeded whitespaceElyes HAOUAS
Change-Id: I6c77f4289b46646872731ef9c20dc115f0cf876d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29161 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-10-18cpu/amd: Use common AMD's MSRElyes HAOUAS
Phase 1. Due to the size of the effort, this CL is broken into several phases. Change-Id: I0236e0960cd1e79558ea50c814e1de2830aa0550 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29065 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-09-25mb: Use 'unsigned int' to bare use of 'unsigned'Elyes HAOUAS
Change-Id: I3a8e077656df02912b4e67c3947bd5af054a18bf Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28701 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-27mb/supermicro/h8qme_fam10: Use common pnp_{enter,exit} functionsElyes HAOUAS
Change-Id: Ie3ee4acfd272991133f02a56df6e23aa6071d3e9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27866 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-09src/mainboard: Fix typoElyes HAOUAS
Change-Id: Ief6a04ccb63658b5fb03cd1d298bf00948cf7410 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27912 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-07-09src/mb: Use "foo *bar" instead of "foo* bar"Elyes HAOUAS
Change-Id: Iedc2e48349e40e94863c8080d11e11dbe6084c9d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27406 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-06-14src: Get rid of unneeded whitespaceElyes HAOUAS
Change-Id: I630d49ab504d9f6e052806b516a600fa41b9a8da Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26991 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-04mb/supermicro: Get rid of whitespace before tabElyes HAOUAS
Change-Id: Id2622e473959dcf105bfeeaebddd582593a3c274 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26637 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-04src/mainboard: Add space after 'if'Elyes HAOUAS
Change-Id: Icae1983be6b8c5aebb121be8a383e2613e064122 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26462 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-04sb/amd/sr5650: Fix invalid function declarationsKyösti Mälkki
Change-Id: I5034debc2296352e698898c20910a2d76071e30a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-04amdfam10: Fix mismatch of function declarationsKyösti Mälkki
Callsite declared returning int, which makes more sense than u8 the motherboard side code defined the functions with. Change-Id: I8ee83aa2833408ad163c9011a076e08578f3ca6f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-02src/mainboard: Add and update license headersMartin Roth
This change adds and updates headers in all of the mainboard files that had missing or unrecognized headers. After this goes in, we can turn on lint checking for headers in all mainboard directories. Change-Id: Ibe038a8f7468253b21fd2ac90c045d0c9cc89dfc Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/26568 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-31Remove all AMD K8 boardsKyösti Mälkki
Platforms with LATE_CBMEM_INIT were agreed to be removed with 4.7 release late 2017. Change-Id: I0ecbb40f8c7ebdf68217f50af5624905d9005c64 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26671 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-05-15mainboard/amd/*: Remove unused arguments from SIOW ACPI methodMartin Roth
Since the SIOW method doesn't use any arguments, don't pass it any, and initialize it as not using any. Change-Id: I3fa2ab8afb7d09c176a94bbd1db27587c36030cd Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/26126 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-08mb/supermicro: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: Icc633dc499568cf672f5e244e026e45a6eea5fd8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26095 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-05-08mb/superio: Rename global control devices as SUPERIO_DEVElyes HAOUAS
Use SUPERIO_DEV for global control device instead of DUMMY_DEV. Change-Id: If3555906d359695b2eae51209cd97fbaaace7e61 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/25852 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-02 18:43:19 +0000