summaryrefslogtreecommitdiff
path: root/src/mainboard/supermicro/x11-lga1151-series
AgeCommit message (Collapse)Author
2020-02-25mb/supermicro/x11-lga1151-series: fix PNP warning for SUART1/2Michael Niewöhner
Fix PNP warning about missing devicetree entry for SUART1/2 by setting register 0xF0 to a sane (default) value. Change-Id: Ie852696aae09b9b03cebd6c3d8cbbd53a7138d89 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39094 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-02-25mb/supermicro/x11-lga1151-series: fix GPIO reset mappingMichael Niewöhner
When specifying _PAD_CFG_STRUCT with raw hex values, a logical reset value of 0x0 is only defined for GPD pads. For any other GPIOs this maps to 0x3. On the Supermicro X11 boards a value of 0x0 is set for GPP_D22 and GPP_F23, triggering the error "gpio_pad_reset_config_override: Logical to Chipset mapping not found". Set the right value (0x3<<30) for the affected GPIOs. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I3ae17dfc4d90f88f5b8bc5bee49740745778a91a Reviewed-on: https://review.coreboot.org/c/coreboot/+/39090 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-02-14mainboard/supermicro: x11ssm-f: disable SUART3/4Michael Niewöhner
SUART3/4 are unused on this board (verified by checking registers on vendor BMC firmware). Further they break the console for an unknown reason. Thus disable them. Change-Id: I30bb8184d03ee1037d9ec33eb1d93ee540563fc5 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38818 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-14mainboard/supermicro: x11ssh-tf: drop leftovers of SUART3/4Michael Niewöhner
SUART3/4 are unused on this board (verified by checking registers on vendor BMC firmware). Thus drop the remaining settings. Change-Id: I2ababd92fcd7016c508aa3119e798f75eeb90a1c Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38817 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-13mainboard/supermicro/x11-lga1151: correct board idsMichael Niewöhner
X11SSM-F has a different board id (0896) than X11SSH-TF (089C). Use the right id for the right board. Change-Id: Ib0d5e66ce1a973f29a1da78f04f7ef677b260cd8 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38834 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-01-28mainboard/supermicro/x11-lga1151-series: Disable UART3 and 4Christian Walter
With UART3 and 4 enabled, the serial console in LinuxBoot crashes. This is a short-term solution until we found and fixed the original bug. Change-Id: I75cb387ef12944232b51f6d8d41810bb27754b05 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38404 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-01-10src: Remove blank acpi_tables source filesKarthikeyan Ramasubramanian
Due to build rules, dummy acpi_tables source files were added in many mainboards. With commit 1e83e5c61a3aa98f58f7d8cbf8d1eb9532896cc3 ("src/arch/x86: Build mainboard acpi_tables source if present"), the build system will build mainboard acpi_tables only if present. Remove the dummy/empty/blank acpi_tables source files. BUG=None TEST=Build test with some google mainboards. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I0cef34368e2e5f5e3b946b22658ca10c7caad90a Reviewed-on: https://review.coreboot.org/c/coreboot/+/37854 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-01-10mb/**/devicetree.cb: Remove untrue commentsAngel Pons
Even if they were corrected, they just rephrase the code. Change-Id: Iebc4e8c9eb0f44f84acf532ad12a5d064075a102 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38047 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-01-06util/supermicro: Add and use new tool smcbiosinfoPatrick Rudolph
The BMC and tools interacting with it depend on metadata placed inside the ROM in order the flash the BIOS. Add a new tool smcbiosinfo, integrate it into the build system, and generate a 128byte metadata file called smcbiosinfo.bin on build. You need to provide the BoardID for every SMC mainboard through a new Kconfig symbol: SUPERMICRO_BOARDID Some fields are unknown, but it's sufficient to flash it using SMC vendor tools. Tested on Supermicro X11SSH: * Flashing using the WebUI works * Flashing using SMCIPMITool works No further validation is done on the firmware. Change-Id: Id608c2ce78614b45a2fd0b26d97d666f02223998 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35484 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-12-31mb/**/dsdt.asl: Remove outdated sleepstates.asl commentAngel Pons
Previously, each Intel chipset had its own sleepstates.asl file. However, this is no longer the case, so drop these comments. Change-Id: I50aba6e74f41e2fa498375b5eb6b7e993d06bcac Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37855 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-12-25mb/supermicro/x11-lga1151-series: Remove default devicetree valuesPatrick Rudolph
The same default values are used if the values are not present in devicetree. Change-Id: Ic910cdc8077e1b3e98eadc77a2d1fa0f9cb38e5b Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37467 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Michael Niewöhner
2019-12-21mb/**/dsdt.asl: Remove "Some generic macros" commentAngel Pons
It provides no useful information, so it might as well vanish. Change-Id: I0df6f4639a16058486c2e2d40fe4067d65670731 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37856 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-11-12mb/*: Fix default fmap with VBOOT_SLOTS_RW_A enabledPatrick Rudolph
Don't select the VBOOT fmap as default if VBOOT is disabled. Fixes a regression introduced by f8251b98 "mb/emulation/qemu: Add VBOOT support" where the default Kconfig settings wouldn't allow the qemu boards to run. Also fix the Supermicro x11-lga1151 series boards. Change-Id: I90414e2cc7e4c4a6ad67014bd4a7f9c8ff4da389 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36707 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-05mb/supermicro/x11ssh-tf: Disable i8042 supportPatrick Rudolph
Even though the vendor firmware enables the i8042 I/O port, it doesn't feed valid data to those, but instead uses USB HID devices. Disable the KBC port in SuperI/O and report no KCS port using FADT. Fixes: * Fixes error message in Linux that i8042 keyboard couldn't be enabled. Tested on Supermicro X11SSH-TF: The virtual remote managment console still works. Change-Id: I1cdf648aa5bf1d0ec48520fa1e45bdaf043cb45d Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36078 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-04soc/intel/sgx: convert SGX and PRMRR devicetree options to KconfigMichael Niewöhner
The devicetree is not made for user-choosable options, thus introduce Kconfig options for both SGX and the corresponding PRMRR size. The PRMRR size Kconfig has been implemented as a maximum value. At runtime the final PRMRR size gets selected by checking the supported values in MSR_PRMRR_VALID_CONFIG and trying to select the value nearest to the chosen one. When "Maximum" is chosen, the highest possibly value from the MSR gets used. When a too strict limit is set, coreboot will die, printing an error message. Tested successfully on X11SSM-F Change-Id: I5f08e85898304bba6680075ca5d6bce26aef9a4d Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35799 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-04mb/supermicro/x11-lga1151-series: drop console guard in bootblockMichael Niewöhner
To make debugging possible in a fallback setup, the serial console must be set up in bootblock, thus drop the guard. Change-Id: If0dd3c03ba52b4936eb234e6b2b61bb5ce044fcd Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36602 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-04mb/supermicro/x11-lga1151-series: use new console delay Kconfig optionMichael Niewöhner
This replaces the hardcoded delay by the new Kconfig option. Change-Id: I8bf4ef7ad9beea7b3dc22e1567623a423597eff9 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36592 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-01soc/intel/{IA-CPU/SOC}: Move sleepstates.asl into southbridge/intel/common/acpiSubrata Banik
This patch creates a common instance of sleepstates.asl inside intel common code (southbridge/intel/common/acpi) and asks all IA CPU/SOC code to refer sleepstates.asl from common code block. TEST=Able to build and boot Hatch and ICL DE system. Dump DSDT.asl to verify S0/S3/S4/S5 entries after booting to OS. Change-Id: Ie2132189f91211df74f8b5546da63ded4fdf687a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36463 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-27mb/supermicro/x11-lga1151: use the new Kconfig to hide GOPMichael Niewöhner
The board does not have any graphics port connected to the SoC. Hence, use the new Kconfig to hide GOP initialization. Change-Id: Ia88e062bea243369da27b94608f89f0808257688 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36349 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-10-24mb/supermicro/x11-lga1151-series: enable SLP_S0 as vendor doesMichael Niewöhner
This enables SLP_S0 for x11 boards. Change-Id: I7240ed631bf72b1d3c9ea887da43772781c80b45 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36141 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-10-23mb/supermicro/x11-lga1151-series: add x11ssm-f boardMichael Niewöhner
This adds another x11 series board, the X11SSM-F, which is similiar to X11SSH-TF but differs in PCIe interfaces/devices, GPIO settings and Ethernet interfaces. Change-Id: I24e6f0f41a844652f88b562285b26beef311a2c9 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35427 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Michael Niewöhner
2019-10-22mb/supermicro/x11-lga1151-series/x11ssh-tf: move usb to overridetreeMichael Niewöhner
Move USB ports from the common devicetree to the variants' overridetree as they differ at least for X11SSH-TF and X11SSM-F. Change-Id: I9bee3a8f6185296cadcee013a8dbe8dca256bf0b Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36139 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-10-15soc/intel/common/block/sgx: Fix crash in MP initPatrick Rudolph
On Hyper-Threading enabled platforms the MSR_PRMRR_PHYS_MASK was written when already locked by the sibling thread. In addition it loads microcode updates on all threads. To prevent such race conditions only call the code on one thread, such that the MSRs are only written once per core and the microcode is only loaded once for each core. Also add comments that describe the scope of the MSR that is being written to and mention the Intel documents used for reference. Fixes crash in SGX MP init. Tested on Supermicro X11SSH-TF. Change-Id: I7102da028a449c60ca700b3f9ccda9017aa6d6b5 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35312 Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-02soc/intel/skylake: devicetree: introduce PchHdaVcType fsp parameterMichael Niewöhner
Make the the FSP Parameter PchHdaVcType a devicetree setting and make use of it in the devicetrees of all boards that currently set it. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: Ibafc3b6bd2495658f2bd634218042ec413a89f5e Reviewed-on: https://review.coreboot.org/c/coreboot/+/35542 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2019-09-30mb/supermicro/x11-lga1151-series: x11ssh-tf: remove unneeded ACPI ifdefMichael Niewöhner
This removes the "ifdef ACPI" which is not needed here as we currently don't include gpio.h in any asl file. Change-Id: I803bbee5933eda9423a9bc9fcaea9e905e3ac78e Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35543 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-30mb/supermicro/x11-lga1151-series: fix cmos layout and add default configMichael Niewöhner
This fixes the warning that power_on_after_fail could not be found, adds a default config and adds the parameter hyper_threading. Change-Id: I10b0aa71fa7916b01e93e16cbd81e427fd14f6a4 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35526 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-27mb/supermicro/x11-lga1151-series: remove unneeded vendor id configMichael Niewöhner
The vendor id option set here is useless as most SSVID registers get filled with 0x8086 (their VID) by default, anyway. Besides that the Kconfig option isn't meant for retrofit ports, cf. commit 7e1c83e31bd (Add Kconfig options to override Subsystem Vendor and Device ID). The right place would be the devicetree. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: If67c679bb342f63096902535734106e4f1651118 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35524 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-09-26mb/supermicro: restructure x11ssh-tf to represent a x11 board seriesMichael Niewöhner
Most of the X11 boards with socket LGA1151 are basically the same boards with just some minor differences like different NICs (1 GbE, 10 GbE), number of NICs / PCIe ports etc. There are about 20 boards that can be added, if there is a community for testing. To be able to add more x11 boards easily like x11ssm (see CB:35427) this restructures the x11ssh tree to represent a "X11 LGA1151 series". There were multiple suggestions for the structure like grouping by series (x10, x11, x...), grouping by chipset or by cpu family. It turned out that there are some "X11 series" boards that are completely different. Grouping by chipset or cpu family suffers from the same problem. This is why finally we agreed on grouping by series and socket ("X11 LGA1151 series"). The structure uses the common baseboard scheme, while there is no "real" baseboard we know of. By checking images, comparing logs etc. we came to the conclusion that Supermicro does have some base layout which is only modified a bit for the different boards. X11SSH-TF was moved to the variants/ folder with it's gpio.h. As we expect the other boards to have mostly the same device tree, there is a common devicetree that gets overridden by each variant's overridetree. Besides that some very minor modifications happened (formatting, fixing comments, ...) but not much. Documentation is reworked in CB:35547 Change-Id: I8dc4240ae042760a845e890b923ad40478bb8e29 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35426 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 04:01:32 +0000