summaryrefslogtreecommitdiff
path: root/src/mainboard/supermicro/h8qgi
AgeCommit message (Collapse)Author
2014-08-06mainboard/amd: De-ASCIIartify AGESA board headersEdward O'Callaghan
As was done for the reference boards in: cd30951 mainboard/amd: De-ASCIIartify reference boards Change-Id: Ie34aa5269388b771daa6934f8aff0314ac6778d5 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6290 Tested-by: build bot (Jenkins) Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
2014-07-28AGESA boards: Drop get_bus_conf.c filesKyösti Mälkki
The only remaining purpose for get_bus_conf() was to fill in obscure bus_sb800 (etc.) arrays containing partial PCI bus enumeration. Complete enumeration is available in devicetree and PCI configuration space so discard these arrays. Change-Id: I733115940afba3a50c58aedb9a04ecf5082b1234 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6360 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-28AGESA boards: Use devicetree for PCI bus enumerationKyösti Mälkki
Previously MP table contained PCI_INT entries for PCI bus behind bridge 0:14.4 even if said PCI bridge function was disabled. Remove these as invalid, indeterminate bus number could cause conflicts. PCI_INT entries with bus_sb800[2], bus_hudson[2] and bus_yangtze[2] were invalid as there is no PCI bridge hardware on device 0:14.0. Remove these as invalid, indeterminate bus number could cause conflicts. Change-Id: Ie6a3807f64c8651cf9f732612e1aa7f376a3134f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6358 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-28AGESA: Drop some excessive agesawrapper.h includesKyösti Mälkki
Change-Id: I3807912b1dc68fae8248a66e37bbe642fb92d3ae Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6262 Tested-by: build bot (Jenkins)
2014-07-24AGESA: Drop offset on PCI device enumerationKyösti Mälkki
Integrated PCI devices in southbridge silicon have static BDFs, no need to have variables to store the parent bus or an offset with constant zero. Change-Id: I37d3794d36b5e5775da9215574ddc199696646d0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6333 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-24AGESA fam15: Drop code that was commented outKyösti Mälkki
Only references to bus_rd890, bus_sp5100 and bus_sr5650 were in code sections that had been commented out. Change-Id: If5552c409ce948c494345f49dbaad790b398bff8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6331 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-24AGESA boards: Drop global bus_isaKyösti Mälkki
Only ever used as lvalue (except when incrementing) so this global is unused. Change-Id: I616721f937eb0bfdb28f356284efd70f99ccd2dd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6330 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-24AGESA fam15: Use local bus_isa storageKyösti Mälkki
Do not use a global as the value gets discarded anyway. Change-Id: I86aac304e073f0d74b011548d079e139891ec140 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6329 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-24src/mainboard: Remove trailing whitespaceElyes HAOUAS
Change-Id: I14a9dc99acb5d5365a3d7e99a3964120bb611b05 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: http://review.coreboot.org/6308 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-24supermicro/h8qgi & h8scm: Remove a trailing whitespaceElyes HAOUAS
Change-Id: I9d44679f32b917dae42b9a6920c3d3c54626dcda Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: http://review.coreboot.org/6324 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-18mainboard: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
Change-Id: If29a70be4fb56ebb0dbf6d510412cbe2f34480ef Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6291 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-07-18mainboard: Make use of ARRAY_SIZE in buildOpts.c on AGESA platformsEdward O'Callaghan
Found using coccinelle. Change-Id: I406de6cfe25d3b471dbb6f98d9c62addae008de3 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6195 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-17AMD get_bus_conf(): Drop bus_type arrayKyösti Mälkki
Only ever used as lvalue, so no point creating the array. Change-Id: I6699dfae9377a895e9bc4a52579d00ddcfa60a9f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6277 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2014-07-17mainboard,Makefile.inc: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
Change-Id: I6a95debbe86fddcaf94270dd380bc73ce3172e58 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6283 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-07-14AGESA CIMx: Move late init out of get_bus_conf()Kyösti Mälkki
Followup deals further with Fam15 case. For unknown reasons calls were commented out for amd/dinar and they remain that way. Change-Id: Ie0a25fbb6f5378019fbf0f19a02acf024d79817e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6237 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-14AGESA: Trace execution with AGESAWRAPPER()Kyösti Mälkki
Implement logging just once to have uniform output. Change-Id: I8db694a3bf6b1af459bdf98f7acb99edf4dd07f7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6180 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-14AGESA: Fix error status code return type to enum from UINT32Edward O'Callaghan
AGESA correctly uses the enum AGESA_STATUS type whereas boards use a mess of UINT32 typecasts. Also no need to shout VOID. We are not that careful on changing all cases of VOID->void or whitespace issues as these files will get merged with follow-ups. Change-Id: I16ccfcc73cda6b917c7ff5fd42ee2cd04e7dc0dd Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6182 Tested-by: build bot (Jenkins)
2014-07-08mainboard: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
Change-Id: I05d6d22664155ac8478e665733f816776e277c22 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6200 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-07-03AGESA: Call get_bus_conf() just onceKyösti Mälkki
Instead of calling get_bus_conf() three times from write_tables() and executing it once, just make one call before entering write_tables(). Change-Id: I818e37128cb0fb5eaded3c1e00b6b146c1267647 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6133 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-03AGESA: Add agesawrapper_post_device()Kyösti Mälkki
NOTE: The procedure is moved across a collected timestamp TS_WRITE_TABLES, so the delay of SPI erase/write will be accounted for in an earlier entry in cbmem -t output. Change-Id: I0f082e7af1769c8d7d03cdd51fdb5dacbf3402b4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6132 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-06-26AMD boards: Fix typosKyösti Mälkki
Change-Id: I92f3877b58d9acaa9578337e66107e9cd9f46043 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6110 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-06-26PIRQ tables: Fix typosKyösti Mälkki
Change-Id: I4d8abe3841378e06515e1b3a8f22d78425d08449 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6109 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-06-18mainboard: Clear up remaining SIO_PORT from KconfigEdward O'Callaghan
Push back any board specific values back into romstage.c #defines and drop any remaining fragments of CONFIG_SIO_PORT in-tree. Change-Id: Ieb63fb0c2ab1a82b53bafd86686de7b21ac226c3 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6045 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-14amd/agesa,cimx: Rename ACPI OS detection methodsEdward O'Callaghan
Try to 'standardize' the otherwise peculiar method naming to be somewhat more in-line with other ACPI implementations. This makes it easier to compare with vendor DSDT dumps for example. Change-Id: I5ba54f7361796669ac0cab7ff91e7de43b22e846 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5888 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-06-06AGESA: Use common heap allocatorKyösti Mälkki
Change-Id: I5df1f0efdef2592b762fe391edaadbca4593e85a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5689 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-06AGESA: Use common GetBiosCallout()Kyösti Mälkki
Change-Id: I9c8f7cc98c65102486e17ec49fa2246211dffc4f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5688 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-26AGESA fam12 fam14 fam15: Declare local callouts staticKyösti Mälkki
Change-Id: I2ff70cafdd808a235ed4f0663e182d306f493c7e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5685 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-26AGESA fam12 fam14 fam15: Common handler for AGESA_RUNFUNC_ONAPKyösti Mälkki
Change-Id: I9f27e1e814a80864d8ca315fe816a083c55708c6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5682 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-26AGESA fam12 fam15: Unify agesawrapper_amdlaterunaptaskKyösti Mälkki
Pass parameter Func like fam14, fam15tn and fam16kb. Change-Id: I262bf88e431f7035e668ac8f3fb29ac0690b3e52 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5681 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-26AGESA fam12 fam14 fam15: Common handler for AGESA_DO_RESETKyösti Mälkki
This is x86 "standard" 0xcf9 reset mechanism. Change-Id: Ieb48290b21a7cb1425881fdd65c794e96da0248f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5680 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-26AGESA: Add common calloutsKyösti Mälkki
Most of the callouts are not specific to board or even family. Start new file with default callouts doing nothing and returning either AGESA_SUCCESS or AGESA_UNSUPPORTED. Also add callout for returning empty IdsIdData. This feature is not used and could be easily overriden at board-level at later time. Change-Id: I65dbcdd80dddc89d47669ebe62c22caa63792f5c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5678 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-10Replace SERIAL_CPU_INIT with PARALLEL_CPU_INITKyösti Mälkki
Lines with 'select SERIAL_CPU_INIT' where redundant with the default being yes. Since there is no 'unselect SERIAL_CPU_INIT' possibility, invert the default and rename option. This squelches Kconfig warnings about unmet dependencies. Change-Id: Iae546c56006278489ebae10f2daa627af48abe94 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5700 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-05-05AGESA: Fix BiosCallouts table formattingKyösti Mälkki
Already done for fam15tn and fam16kb. Change-Id: I3da36bfe6fd1805867eee5aa1f017c4fda084349 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5660 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-05AGESA: Implement EmptyHeap()Kyösti Mälkki
Heap allocation begins with BIOS_HEAP_MANAGER, no need to clear the fields individually. Change-Id: Ia1af84bd09d1edf8f72223752557d44a96dec6e1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5659 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-05AGESA fam15: Add GetHeapBase()Kyösti Mälkki
While fam15 boards do not select HAVE_ACPI_RESUME, backport this from fam14. Implementation of this function is common across different families. Change-Id: I222b418a0a79bbdf5f5cce6c876243ecb4912256 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5655 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-05AGESA fam15: Use common calloutsKyösti Mälkki
Backport from fam15tn and fam16kb. Change-Id: I6d8f9a88f0dc43c36efb168c0111a6e2bcdda5fd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5651 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-05AGESA fam15: Add fam15_callouts headerKyösti Mälkki
Backported from fam15tn and fam16kb. Change-Id: I13ca70d141a46220a5d8ea7bb3898bc7d7258424 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5650 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-03Move ARCH_* from board/Kconfig to cpu or soc Kconfig.Furquan Shaikh
CONFIG_ARCH is a property of the cpu or soc rather than a property of the board. Hence, move ARCH_* from every single board to respective cpu or soc Kconfigs. Also update abuild to ignore ARCH_ from mainboards. Change-Id: I6ec1206de5a20601c32d001a384a47f46e6ce479 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5570 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-28superio/winbond/w83627dhg: Convert romstage to generic componentEdward O'Callaghan
Convert the serial init to the generic romstage component and corresponding boards using this sio. Change-Id: I36bcf38c4351130be1ed924ecfe606336d0433f3 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5588 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-28AMD: Add common header file for CAR setupKyösti Mälkki
Change-Id: I24b2cbd671ac3a463562d284f06258140a019a37 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4683 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-04-26mainboard/*: Remove DUMP_ACPI_TABLES from amd boardsEdward O'Callaghan
Dumping the ACPI tables in this way has limited use, is not likely to be used and is poorly implemented. There are much more sophisticated tools available on Linux for debugging ACPI as such this code is outside the scope of coreboots 'bring up the hardware only' philosophy. A more generic implemention could be done with hexdump() in coreboot proper following on from this cleanup. Change-Id: Ifd3bfb76338609d18fcf7158d3c9a6d7c06c8847 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5530 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-20AMD AGESA cimx/sb700: Drop APIC_ID_OFFSET and MAX_PHYSICAL_CPUSKyösti Mälkki
Following boards use cimx/sb700: amd/dinar supermicro/h8qgi supermicro/h8scm tyan/s8226 Only amd/dinar had APIC_ID_OFFSET defined, thus all had 0x0. There was a nonsense preprocessor directive (MAX_CPUS * MAX_PHYSICAL_CPUS >= 1). Except for tyan, (MAX_CPUS * MAX_PHYSICAL_CPUS) % 256 == 0. Together with documented 4-bit restriction for APIC ID field, this APIC ID programming matches with MP tables and ACPI tables. I believe this would also fix cases of cimx/sb700 with MAX_CPUS<16, which we do not have in the tree. Change-Id: If8d65e95788ba02fc8d331a7af03a4d0d8cf5c69 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5539 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-13cimx/sb800 boards: Don't require ide.asl on boards without IDEEdward O'Callaghan
Not all boards which use the AMD cimx/sb800 southbridge have IDE. However, the southbridge's asl included an 'ide.asl' file which had to be present in $(mainboard_dir)/acpi. Address this issue by including ide.asl only in boards which have IDE, and remove it from all other cimx/sb800 boards. Change-Id: I57fcb4db9f85234b05ae1705ef81a576c478cee6 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5460 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-09supermicro/h8qgi/dsdt: Use PIC as default interrupt modelKonstantin Aladyshev
According ACPI specification: """ The \_PIC optional method is used to report to the BIOS the current interrupt model used by the OS. The argument passed into the method signifies the interrupt model OSPM has chosen, PIC mode, APIC mode, or SAPIC mode. Notice that calling this method is optional for OSPM. If the method is never called, the BIOS must assume PIC mode. Arguments: (1) Arg0 – An Integer containing a code for the current interrupt model: 0 –PIC mode 1 –APIC mode 2 –SAPIC mode """ In current configuration with default value of interrupt model PMOD equal 1 (APIC mode), Linux can't boot with "noapic" option. Kernel never call _PIC method and PMOD stays equal 1, indicatind that APIC routing objects should be evaluated. This mix of PIC and APIC leads to boot fail. Change default value of interrupt model PMOD to 0, for correct "noapic" boot. Change-Id: I7fa6f0c24802751202ed2e7f13411001a600e772 Signed-off-by: Konstantin Aladyshev <aladyshev@nicevt.ru> Reviewed-on: http://review.coreboot.org/5473 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-09supermicro/h8qgi/dsdt: Move _PIC method to root scopeKonstantin Aladyshev
_PIC method should be declared under root scope (\_PIC), otherwise Linux kernel doesn't use it. Change-Id: I29b6ca60191507ac8edf99fdf173617bd6446934 Signed-off-by: Konstantin Aladyshev <aladyshev@nicevt.ru> Reviewed-on: http://review.coreboot.org/5478 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-02-06console: Drop extra uart_init()Kyösti Mälkki
This call is already in console_init(). Change-Id: Ie0cb3595af514e37efac5ac5d474f52ba551bf22 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5140 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-01-19board-status: Add board_info.txt extracted from wiki.Vladimir Serbinenko
board_info.txt is a file to be used by board-status to add some useful info to the generated table like flash chip type. This series is autogenerated from wiki page Supported_Motherboards. Change-Id: Ie2bda900713ef4883134477163320936c84c34f5 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4701 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-01-15Re-declare CACHE_ROM_SIZE as aligned ROM_SIZE for MTRRKyösti Mälkki
This change allows Kconfig options ROM_SIZE and CBFS_SIZE to be set with values that are not power of 2. The region programmed as WB cacheable will include all of ROM_SIZE. Side-effects to consider: Memory region below flash may be tagged WRPROT cacheable. As an example, with ROM_SIZE of 12 MB, CACHE_ROM_SIZE would be 16 MB. Since this can overlap CAR, we add an explicit test and fail on compile should this happen. To work around this problem, one needs to use CACHE_ROM_SIZE_OVERRIDE in the mainboard Kconfig and define a smaller region for WB cache. With this change flash regions outside CBFS are also tagged WRPROT cacheable. This covers IFD and ME and sections ChromeOS may use. Change-Id: I5e577900ff7e91606bef6d80033caaed721ce4bf Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4625 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2013-12-26AMD AGESA: Drop MEM_TRAIN_SEQKyösti Mälkki
This config was for AMD K8 only. Change-Id: Ic1ce60041fef6ddee2dae0e3559fb78f088740af Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4556 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-09-17Fix whitespace leaked into treeKyösti Mälkki
Clean whitespace errors that have gotten past lint-stable-003-whitespace and gerrit review. Change-Id: Id76fc68e9d32d1b2b672d519b75cdc80cc4f1ad9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3920 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-08-16Correct spelling of shadow, setting and memoryPaul Menzel
Change-Id: Ic7d793754a8b59623b49b7a88c09b5c6b6ef2cf0 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3768 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-08-15Include boot_cpu.c for romstage buildsKyösti Mälkki
ROMCC boards were left unmodified. Change-Id: I3d842196b3f5b6999b6891b914036e9ffcc3cef0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3853 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-07-10Rename hardwaremain() to main()Stefan Reinauer
... and drop the wrapper on ARMv7 Change-Id: If3ffe953cee9e61d4dcbb38f4e5e2ca74b628ccc Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3639 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-28Drop WARNINGS_ARE_ERRORS exceptionsStefan Reinauer
Thanks to Bruce's great work, we can finally drop this workaround. Change-Id: Ie92d1e53ef867fa34aa2489ccfb682d73195b213 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3569 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-06-28Supermicro H8SCM/H8QGI: Increase size of bus variable to meet APIBruce Griffith
Users of mptable_write_buses() pass two pass-by-reference parameters reflecting a maximum bus number and a search bus number. These bus numbers are expected to be held in "int" variables and are updated by the function. Both of the Supermicro boards define the search bus number as a byte value in mptable.c. For now, change the two Supermicro boards to use "int" to hold the search bus index. Change-Id: Ie71850719c1fa3cda0ac9c8773bb80650de95c70 Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/3546 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-28AMD SB700 boards: Set Azalia configuration flagsBruce Griffith
The existing code for setting Azalia configuration assumes that the configuration bits are contiguous within a single byte and can be set using a byte copy addressed into the lowest 2-bit subfield. The fix in Family 14 defines a union that can be addressed as a byte to overlay the bit fields. Since the offset of the four subfields is not necessarily fixed, change the code to initialize each of the four subfields individually. Change-Id: I1dff20bb8bd3e1bcd8b4e6b0537e20779d2a3521 Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/3544 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Zheng Bao <zheng.bao@amd.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-28Dinar, H8SCM, H8QGI: Add prototype of get_bus_conf()Bruce Griffith
On Dinar, H8SCM, and H8QGI, add <cpu/amd/amdfam15.h> as an include to pick up the prototype definition of get_bus_conf(). Change-Id: Ie4887670ac52aa194745881362df19cd1d75773e Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/3542 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Zheng Bao <zheng.bao@amd.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-24AMD: Drop empty root_complexKyösti Mälkki
There are no files to build left under AMD nortbridge/x/root_complex directories. For some cases, even the Kconfig file was no longer sourced. Remove all such references and empty files. For devicetree.cb treat component paths with "/root_complex" in them valid even when the directory does not exists. This is because AMD boards us this dummy chip component as the root node in their devicetree.cb. The generated devicetree file static.c remains unchanged. Change-Id: I9278ebb50a83cebbf149b06afb5669899a8e4d0b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3434 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-06-17AMD southbridges: Move HAVE_HARD_RESETKyösti Mälkki
All 3 boards with AGESA_HUDSON had HAVE_HARD_RESET with the reset.c file already placed under southbridge/. All 15 boards with CIMX_SBx00 had HAVE_HARD_RESET with functionally identical reset.c file under mainboard/. Move those files under respective southbridge/. Change-Id: Icfda51527ee62e578067a7fc9dcf60bc9860b269 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3486 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-06-17AMD boards: Clean use of Kconfig optionsKyösti Mälkki
The chip component is unconditionally selected for the mainboard so these uses are superfluous. Change-Id: I84b053ab47f7b1f68e88d968cf305e24bc95f4da Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3485 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-05-09AMD: Reduce stack size from 64 KB to the default of 4 KBPaul Menzel
Apply the following commit to all AMD boards. commit 935850e08293cec1cb27d12358b27285e780566a Author: Stefan Reinauer <reinauer@chromium.org> Date: Mon May 6 16:16:03 2013 -0700 asrock/e350m1: reduce default stack size The stack used on the ASRock E350M1 is significantly less than what we currently set (64k per core). In fact, we use about half of the default stack size (4k) on core 0 and even less on non BSP cores [1]: $ grep stack coreboot_without_patch_but_monotonic_timer.log CPU1: stack_base 002a0000, stack_end 002afff8 CPU1: stack: 002a0000 - 002b0000, lowest used address 002afda8, stack used: 600 bytes CPU0: stack: 002b0000 - 002c0000, lowest used address 002bf75c, stack used: 2212 bytes […] Reviewed-on: http://review.coreboot.org/3209 Please note that AGESA seems to define bigger stack sizes. But these seem to be too much too. $ git grep STACK_SIZE src/vendorcode/amd […] src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c:#define BSP_STACK_SIZE 16384 src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c:#define CORE0_STACK_SIZE 16384 src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c:#define CORE1_STACK_SIZE 4096 src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c: BSP_STACK_SIZE, src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c: CORE0_STACK_SIZE, src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c: CORE1_STACK_SIZE, […] The following command was used to create the patch. $ git grep -l STACK_SIZE src/mainboard/ | xargs sed -i '/STACK_SIZE/,+3d' Change-Id: I36b95b7a6f190b64d0639fc036ce2fb0253f3fa1 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3217 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-08copy_and_run: drop boot_complete parameterStefan Reinauer
Since this parameter is not used anymore, drop it from all calls to copy_and_run() Change-Id: Ifba25aff4b448c1511e26313fe35007335aa7f7a Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3213 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-22x86: Unify arch/io.h and arch/romcc_io.hStefan Reinauer
Here's the great news: From now on you don't have to worry about hitting the right io.h include anymore. Just forget about romcc_io.h and use io.h instead. This cleanup has a number of advantages, like you don't have to guard device/ includes for SMM and pre RAM anymore. This allows to get rid of a number of ifdefs and will generally make the code more readable and understandable. Potentially in the future some of the code in the io.h __PRE_RAM__ path should move to device.h or other device/ includes instead, but that's another incremental change. Change-Id: I356f06110e2e355e9a5b4b08c132591f36fec7d9 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2872 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-20Supermicro H8QGI: Use SPD read code from F15 wrapperKimarie Hoot
Changes: - Get rid of the h8qgi mainboard specific code and use the platform generic function wrapper that was added in change http://review.coreboot.org/#/c/2777/ AMD Fam15: Add SPD read functions to wrapper code - Move DIMM addresses into devicetree.cb Notes: - The DIMM reads only happen in romstage, so the function is not available in ramstage. Point the read-SPD callback to a generic function in ramstage. - select_socket() and restore_socket() started by duplicating sp5100_set_gpio() and sp5100_restore_gpio(), which were in dimmSpd.c. In addition to renaming the functions to more specifically state their purpose, some cleanup and magic number reduction was done. Change-Id: I346ebd8399d4ba3e280576e667fdc62fa75a63b8 Signed-off-by: Kimarie Hoot <kimarie.hoot@se-eng.com> Reviewed-on: http://review.coreboot.org/2828 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-08Supermicro H8QGI: set up right frequency limits for memory controllerKonstantin Aladyshev
According to BKDG: "Memory controller (MCT) and DRAM controllers (DCTs) additions: • Support for 933 MHz (1866 MT/s) MEMCLK frequency." Change-Id: I6f307ce3fcb355d5445f1ea86def73a41b928a57 Signed-off-by: Konstantin Aladyshev <aladyshev@nicevt.ru> Reviewed-on: http://review.coreboot.org/2589 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-03-01GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«Paul Menzel
In the file `COPYING` in the coreboot repository and upstream [1] just one space is used. The following command was used to convert all files. $ git grep -l 'MA 02' | xargs sed -i 's/MA 02/MA 02/' [1] http://www.gnu.org/licenses/gpl-2.0.txt Change-Id: Ic956dab2820a9e2ccb7841cab66966ba168f305f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2490 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-02-25Supermicro H8SCM & H8QGI: Fix printk warningsMartin Roth
Changes: - Fix printk warnings for these two platforms by getting rid of the l length specifier and casting to unsigned int. This gets rid of a bunch of warnings like this one: agesawrapper.c:279, GNU Compiler 4 (gcc), Priority: Normal format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'UINT32' [-Wformat] Notes: - This is the same change that was done for Tyan s8226 in change: ddff32eb - http://review.coreboot.org/#/c/2451/ Tyan S8226: Fix printk warnings - I have not tested this change on either of these platforms, I have just compiled it. Change-Id: I46b4c13fde7473cd2a084c7c7cb5c893f1731b02 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/2502 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-25AMD boards: ACPI DSDT: Use COREBOOT for the OEM Table ID fieldPaul Menzel
The DSDT header contains the fields OEMID and OEM Table ID. See for example ACPI specification 4.0a [1] 5.2.11.1 Differentiated System Description Table (DSDT) on page 135. There Table 5-16 contains the descriptions. Field Byte Length Byte Offset Description =================================================== OEMID 6 10 OEM ID OEM Table ID 8 16 The manufacture model ID. Currently in coreboot there is no common method what to put in these fields. Mostly Intel based boards populate it with "CORE " ore "COREv4" and AMD based boards populate it with the board vendor and model number, abbreviated appropriately to fit into these fields. On most boards the proprietary vendor BIOS seems to leave these fields – displayed with `sudo dmidecode` under System Information – blank To Be Filled By O.E.M. and fill out the Base Board Information with the board vendor and model name. In [2] Jens Rottmann argues that the this is really just the table ID used for naming it and that »99% of the DSDT code is not board specific«. Both approaches seem to have their advantages, but using the second one, developers often seem to forget to update them (for example AMD Thather). The current situation is at least not optimal. and therefore at least unify the string in the OEM Table ID. If unifying the OEM ID is also a good idea this should be done too. If later on it should be decided that the board vendor and model should be used again, this should be somehow derived from Kconfig. The following command was used for the change [3]. $ git grep -l '\/\* TABLE ID \*\/' | xargs sed -i '/TABLE ID/s/"\([^"]*\)"/"COREBOOT"/' This patch is split out from [2]. [1] http://www.acpi.info/spec40a.htm [2] http://review.coreboot.org/#/c/2464/ [3] http://stackoverflow.com/questions/5207838/sed-regex-matching-text-between-to-double-quotes-when-a-certain-text-appears-i Change-Id: Iec98c615ce37f928abc1b500eff5aa865d772cb2 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2472 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-25mainboard.c: Name enable_dev function uniformly `mainboard_enable`Paul Menzel
To reduce the differences between these file name the enabling device function in the directory `src/mainboard` uniformly `mainboard_enable` [1]. Thanks to the awesome help of gnomon and BlastHardcheese in the IRC channel #sed on <irc.freenode.net>. gnomon came up with the following command to do the actual work. $ cd src/mainboard $ for f in */*/mainboard.c ; \ > do src="$(awk '/\.enable_dev = /{v=$NF; sub(/,$/,"",v); print v}' "$f")" ; \ > [[ -z $src ]] && continue ; \ > printf '%s\n' "g/${src}/s/${src}\([,(]\)/mainboard_enable\1/p" w | ed -s "$f" ; \ > done `src/mainboard/digitallogic/msm586seg/mainboard.c` and `src/mainboard/technologic/ts5300/mainboard.c` had to be adapted manually as no comma was used separating the struct members. And with the following statement, gnomon is even more likable! My pleasure entirely. Good luck with coreboot; I'm a big fan of the project. [1] http://www.coreboot.org/pipermail/coreboot/2013-February/074548.html Change-Id: Ife9cd0c2d9cc1ed14afc6d40063450553f06a6c6 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2493 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-21AMD boards: Fix typo `@brief` in commentPaul Menzel
The following command was used to correct the typo. $ git grep -l @breif | xargs sed -i 's/@breif/@brief/' Change-Id: If0b579279de3c41571b9cda643836f5748a752a2 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2473 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-14sconfig: rename lapic_cluster -> cpu_clusterStefan Reinauer
The name lapic_cluster is a bit misleading, since the construct is not local APIC specific by concept. As implementations and hardware change, be more generic about our naming. This will allow us to support non-x86 systems without adding new keywords. Change-Id: Icd7f5fcf6f54d242eabb5e14ee151eec8d6cceb1 Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2377 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-14sconfig: rename pci_domain -> domainStefan Reinauer
The name pci_domain was a bit misleading, since the construct is only PCI specific in a particular (northbridge/cpu) implementation, but not by concept. As implementations and hardware change, be more generic about our naming. This will allow us to support non-PCI systems without adding new keywords. Change-Id: Ide885a1d5e15d37560c79b936a39252150560e85 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2376 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-11Supermicro H8QGI: Substract 1 from MMCONF range limitKonstantin Aladyshev
MMCONF space is defined by two config parameters: MMCONF_BASE_ADDRESS (0xF800 0000) MMCONF_BUS_NUMBER (64) Coreboot allocates 1MB per bus, so MMCONF limit should be: 0xF800 0000 + 64*(0x0010 0000) - 1 = 0xFBFF FFFF Current code does not have (-1) component, this makes MMCONF limit equal 0xFC00 FFFF. Not 0xFC00 0000, because according to BKDG lower two bytes of MMIO limit always equal 0xFFFF: MMIOLimit = {MMIOLimitRegister[47:16], FFFFh}. Add (-1) to correct this issue. No functionality change has been experienced. The five times slower RAM speed compared to the proprietary vendor BIOS still remains. Change-Id: I2c6494c28bb8d36e54ceb2aa7d8d965b0103cbe9 Signed-off-by: Konstantin Aladyshev <aladyshev@nicevt.ru> Reviewed-on: http://review.coreboot.org/2193 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-02-04AGESA boards: Fix grammar in description of `OemCustomizeInitEarly`Paul Menzel
The following command was used to correct the grammatical mistake. $ git grep -l 'This is the stub function will call' | xargs sed -i s,This is the stub function will call,This stub function will call, '{}' sed: -e Ausdruck #1, Zeichen 6: Nicht beendeter `s'-Befehl As this file seems to have been copied around a lot, it originally seems to have come with the following commit for AMD Persimmon and AMD Inagua. commit 69da1b676cd3f126b27a6fd3c23c557ac1a03961 Author: Frank Vibrans <frank.vibrans@amd.com> Date: Mon Feb 14 19:04:45 2011 +0000 Add IBASE DB-FT1 and AMD Inagua motherboards. Patch 8 of 8. Change-Id: I2e6630a5172738b01e6def7062284f167e5508b1 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2268 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2013-01-16Fix high dword of MTRR mask set with CONFIG_CPU_ADDR_BITSMartin Roth
Bits were being shifted off the end of the mask accidentally. This results in all masks being 32 bits wide instead of 48. Change-Id: I5f4d1b6a323df1aa4568ff4491f82447b8a2f839 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/2146 Tested-by: build bot (Jenkins) Reviewed-by: Zheng Bao <zheng.bao@amd.com> Reviewed-by: Marc Jones <marcj303@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-01-11AMD: Set the mask of MTRR according to CONFIG_CPU_ADDR_BITSZheng Bao
The high bits of mtrr mask are MBZ (Must be zero). Writing 1 to these bits will cause exception. So be carefull when spread this change. The supermicro/h8scm needs more work. Currently it is set as it was. We need to check if the F10 and F15 have different value. Change-Id: I2dd8bf07ecee2fe4d1721cec6b21623556e68947 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1661 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2013-01-02Supermicro H8QGI: Pass callout pointer to AmdReadEventLog functionAladyshev Konstantin
I have issues when AmdReadEventLog function tries to use BiosCallouts interface. So it is necessary to provide callout pointer to this function. Change-Id: I4080e5f07d5d28c41688b2a7deff944b7a0f7bf7 Signed-off-by: Aladyshev Konstantin <aladyshev@nicevt.ru> Reviewed-on: http://review.coreboot.org/2064 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com> Reviewed-by: Zheng Bao <zheng.bao@amd.com>
2012-12-28Supermicro H8QGI: Add onboard VGA to devicetree.cbAladyshev Konstantin
Supermicro H8QGI has integrated Matrox G200 16MB DDR2 graphics. List it in devicetree.cb to mark it as onboard VGA to coreboot. This change makes menuconfig option "Use onboard VGA as primary video device" work. Change-Id: Ia6b9f60e3ae705689f22babd544ad6e628a85df1 Signed-off-by: Aladyshev Konstantin <aladyshev@nicevt.ru> Reviewed-on: http://review.coreboot.org/2042 Tested-by: build bot (Jenkins) Reviewed-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-12-28Supermicro H8QGI: fix bus_sp5100[] clear in get_bus_conf.cAladyshev Konstantin
Fix little mistake in get_bus_conf code Change-Id: I8c09e501082caa0a20266b007c0744630a356de0 Signed-off-by: Aladyshev Konstantin <aladyshev@nicevt.ru> Reviewed-on: http://review.coreboot.org/2046 Tested-by: build bot (Jenkins) Reviewed-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-by: Zheng Bao <zheng.bao@amd.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-12-28BiosCallOuts: Replace REQUIRED_CALLOUTS define with flexible variableAladyshev Konstantin
Size of BiosCallouts[] struct can be calculated as: CallOutCount = sizeof (BiosCallouts) / sizeof (BiosCallouts [0]); There is no longer need for REQUIRED_CALLOUTS define. Originally that change was done for AMD Persimmon in commit d7a696d0f229abccc95ff411f28d91b9b796ab74 Author: efdesign98 <efdesign98@gmail.com> Date: Thu Sep 15 15:24:26 2011 -0600 Persimmon updates for AMD F14 rev C0 without deleting the define. This was ported to some of the other boards and for some the define was not removed. The AMD Inagua, Parmer and Thatcher boards were already adapted but the define was left in. So just remove it for those. Tested on Supermicro H8QGI. Change-Id: Ia09795579a1170fa20ab94a30feb1af6821153d2 Signed-off-by: Aladyshev Konstantin <aladyshev@nicevt.ru> Reviewed-on: http://review.coreboot.org/2049 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin@se-eng.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-12-21Supermicro H8QGI: Fix routing from 16 to 55 in ACPI tableAladyshev Konstantin
H8QGI board has 2 IO-APICS with 56 IRQ’s: IOAPIC[0]: GSI 0-23 - SB700 southbridge IOAPIC[1]: GSI 24-55 - RD890 northbridge `gDefaultApicDeviceInfoTable[]` structure in northbridge code vendorcode/amd/cimx/rd890/nbIoApic.c has IO-APIC interrupt mapping for HT and IOMMU set to last 31 IRQ pin (24+31=55). CONST APIC_DEVICE_INFO gDefaultApicDeviceInfoTable[] = { // Group Swizzling Port Int Pin {0, 0, 31}, //HT {0, 0, 31}, //IOMMU […] Also the same value (55) can be found in original Supermicro BIOS ACPI DSDT. Change-Id: Ie26da1f773716d1b7f5f5f884050ae799afc0b7e Signed-off-by: Aladyshev Konstantin <aladyshev@nicevt.ru> Reviewed-on: http://review.coreboot.org/2047 Tested-by: build bot (Jenkins) Reviewed-by: Zheng Bao <zheng.bao@amd.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-27Drop duplicate files that prevent building without ramstage.aStefan Reinauer
When dropping ramstage.a duplicate symbols in ramstage will start breaking the build. Hence drop all the duplicate functions implemented by mainboards that have those functions in generic or component code already. Change-Id: I5cf8245c67b6f0f348388db54256d28f47017a61 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1865 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-11-16Drop unneeded BOARD_HAS_FADT optionStefan Reinauer
Change-Id: Iaaeee87d70cf052bc7980007cdf1f7dda88b3623 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1836 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-16Drop CONFIG_HAVE_BUS_CONFIG, clean up KconfigStefan Reinauer
This patch is the beginning of a Kconfig cleanup series - drop CONFIG_HAVE_BUS_CONFIG and add get_bus_conf.c if it exists in the mainboard directory - drop duplicate ACPI_SSDTX_NUM from mainboard Kconfig if it only defines the defaul value of 0 - Add mptable.c, fadt.c, reset.c and ssdtX.asl when they exist, not based on some Kconfig magic Signed-off-by: Stefan Reinauer <reinauer@google.com> Change-Id: Ia14a7116dad6a724af7e531920fee9a51fd0b200 Reviewed-on: http://review.coreboot.org/1832 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-09Get rid of hard coded strings in ACPI tablesStefan Reinauer
(cosmetical) Change-Id: I3e01d8fbf2d71abcfcbe47efedd2184566c91df7 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1748 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-11-06Drop redundant CHIP_NAME in mainboard.cKyösti Mälkki
Compose the name from Kconfig strings instead. As the field is for debug print use only, a minor change in the output should do no harm. The strings no longer include word "Mainboard". Change-Id: Ifd24f408271eb5a5d1a08a317512ef00cb537ee2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1635 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-08-08Cleanup coreboot memory table includesKyösti Mälkki
The includes removed here were previously required for struct lb_memory and lb_add_memory_range(). Change-Id: Ie6c0d4ef55c2225aa709cf3fbad30ff1080e3610 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1391 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2012-08-08Drop HAVE_MAINBOARD_RESOURCESKyösti Mälkki
These existed to provide a hook to add reserved memory regions in the coreboot memory table. Reserved memory are now added as resources. Change-Id: I9f83df33845cfa6973b018a51cf9444dbf0f8667 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1414 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2012-07-31Revert "remove CONFIG_SERIAL_CPU_INIT"Sven Schnelle
This reverts commit 78efc4c36c68b51b3e73acdb721a12ec23ed0369. The broadcast patch was reverted, so this commit should also be reverted. The reason for reverting the broadcast patch: It turned out that sending IPIs via broadcast doesn't work on Sandybridge. We tried to come up with a solution, but didn't found any so far. So revert the code for now until we have a working solution. Change-Id: I05c27dec55fa681f455215be56dcbc5f22808193 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1380 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-26Drop mainboard chip.hStefan Reinauer
mainboard_config never worked right, at least not since we've had sconfig. Hence, drop mainboard/<vendor>/<device>/chip.h and fix up the mainboards that tried to use it anyways. Change-Id: I7cd403ea188d8a9fd4c1ad15479fa88e02ab8e83 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1359 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-02remove CONFIG_SERIAL_CPU_INITSven Schnelle
The new broadcast code doesn't support serial init - if a CPU needs serial init, this should be handled in the model specific CPU init code. Change-Id: I7cafb0af10d712366819ad0849f9b93558e9d46a Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1140 Tested-by: build bot (Jenkins)
2012-05-08Clean up #ifsPatrick Georgi
Replace #if CONFIG_FOO==1 with #if CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*1[[:space:]]*\$,#if \1," {} + Replace #if (CONFIG_FOO==1) with #if CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*(\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*1)[[:space:]]*\$,#if \1," {} + Replace #if CONFIG_FOO==0 with #if !CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*0[[:space:]]*\$,#if \!\1," {} + Replace #if (CONFIG_FOO==0) with #if !CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*(\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*0)[[:space:]]*\$,#if \!\1," {} + (and some manual changes to fix false positives) Change-Id: Iac6ca7605a5f99885258cf1a9a2473a92de27c42 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1004 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Martin Roth <martin@se-eng.com>
2012-04-20Refactor some alignment handlingPatrick Georgi
Made using coccinelle: @@ expression E; @@ -(E + 7) & -8 +ALIGN(E, 8) @@ expression E; @@ -(E + 15) & -16 +ALIGN(E, 16) Change-Id: I071d2c98cd95580d7de21d256c31b6368a3dc70b Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/910 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-04-19Fix the blank in acpi_tables.czbao
Hope no more blank issue is got from future copy-paste. Change-Id: I5eb50e8232e339e7039a15054606aaff6b7ebc52 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/907 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-04-19Fix messy code in ALIB creationzbao
Fix the copy-paste typo in ALIB table creation. ssdt is useless here. Change-Id: I250066eb5f755275f75c37789ce8760de35b046b Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/885 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-04-19Leverage the Pstate table created by AGESA.zbao
The name of processor created by AGESA is P00n, whose P is BLDCFG_PROCESSOR_SCOPE_NAME(is 'C' if it is undefined.) and n starts from 0. The dsdt should be aligned with that. This feature has only been tested on persimmon. The changes on all the other boards were propagated. Change-Id: I8c3fa4b94406d530d2bed8e9a1f42b433bbec3ec Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/884 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-04-16ACPI HEST table.zbao
HEST feature starts from ACPI 4.0. HEST is one of four kinds of tables of ACPI Platform Error Interfaces (APEI). In Windows world, APEI is called Windows Hardware Error Architecture (WHEA). APEI consists of four separate tables: 1. Error Record Serialization Table (ERST) 2. BOOT Error Record Table (BERT) 3. Hardware Error Source Table (HEST) 4. Error Injection Table (EINJ) All these 4 tables have the same header as FADT, MADT, etc. They are pointed by RSDP. For the HEST, it contains the error source. The types of them are defined as type description 1. Machine Check Exception (MCE) 2. Corrected Machine Check (CMC) 3. NMI Error 6. PCI Express Root Port AER 7. PCI Express Device AER 8. PCI Express Bridge AER 9. Generic Hardware Error Source Error source types 3, 4, and 5 are reserved for legacy reasons and must not be used. Currently AMD board only provide part of "Machine Check Exception (MCE)" & Corrected Machine Check (CMC)". we need to provide the header of each error source. Other types of Error Sources is in TODO list. Only persimmon is tested. Linux can add HEST feature. The dmesg says, ACPI: HEST 0000000066fe5010 00198 (v03 CORE COREBOOT 00000000 CORE 00000000) ...... HEST: Table parsing has been initialized. No more message is got. Windows can boot with this patch. Havent found a way to test it. Change-Id: I447e7f57b8e8f0433a145a43d0710910afabf00f Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/888 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2012-03-31Drop obsolete TINY_BOOTBLOCKKyösti Mälkki
Change-Id: I0cbb5f7fce91fe65fe8daad00fc43e68337783b0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/832 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-03-08Unify Local APIC address definitionsPatrick Georgi
We used several names for that same value, and hardcoded the value at some more places. They're all LOCAL_APIC_ADDR now (except for lapic specific code that still uses LAPIC_DEFAULT_BASE). Change-Id: I1d4be73b1984f22b7e84681edfadf0588a7589b6 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/676 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-22ACPI: More ../../.. removalPatrick Georgi
CPP is ran with src/ as part of its search path, so using <northbridge/...> and the like is safe. Change-Id: I644d60190ac92ef284d5f0b4acf44f7db3c788ee Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/649 Tested-by: build bot (Jenkins)
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 17:03:20 +0000