summaryrefslogtreecommitdiff
path: root/src/mainboard/supermicro/h8dme
AgeCommit message (Expand)Author
2010-04-27Since some people disapprove of white space cleanups mixed in regular commitsStefan Reinauer
2010-04-25try to unify timing initialization across those boards that need it...Stefan Reinauer
2010-04-16zero warnings days: unify mp tables. fix warnings.Stefan Reinauer
2010-04-15zero warnings days...Stefan Reinauer
2010-04-14zero warning days. Move RAMTOP and RAMBASE together.Stefan Reinauer
2010-04-14drop quite a lot of dead code that did nothing but produce warnings and makeStefan Reinauer
2010-04-09copy_and_run.c is not needed twice, and it is used on non-car too.Stefan Reinauer
2010-04-08Clean up fidvid files using indent.Myles Watson
2010-04-08Replace dual_core and quad_core CMOS (nvram) options with multi_core. Fix so...Myles Watson
2010-04-07move amd K8/Fam10 "bus detection" function prototypes to a common place.Stefan Reinauer
2010-04-07- unify use of SB_HT_CHAIN_UNITID_OFFSET_ONLYStefan Reinauer
2010-03-31Drop \r\n and \n\r as both print_XXX and printk now do this internally.Stefan Reinauer
2010-03-31This patch drops arch/i386/lib/console.c and arch/i386/lib/console_print.c andStefan Reinauer
2010-03-30drop USE_INIT from mainboard Kconfig files, it's already set in src/KconfigStefan Reinauer
2010-03-30unify cmos.layout wrt AMD extended configuration registers.Stefan Reinauer
2010-03-29This drops the ASSEMBLY define from romstage.c, tooStefan Reinauer
2010-03-29__PRE_RAM__ is now correctly specified in the Makefile. No need to hack it intoStefan Reinauer
2010-03-29This patch drops the coreboot CMOS checksum ranges from Kconfig becauseStefan Reinauer
2010-03-29dualcore.h and quadcore.h are almost exactly the same. Stefan Reinauer
2010-03-22Fix all the format string warnings.Myles Watson
2010-03-22printk_foo -> printk(BIOS_FOO, ...)Stefan Reinauer
2010-03-18Remove remaining uses ofPatrick Georgi
2010-03-18Rework boolean expression (DeMorgan and all) forPatrick Georgi
2010-03-17Remove failover/fallback/normal handling in mainboards'Patrick Georgi
2010-02-28disable AP_CODE_IN_CAR. The K8 code has an alternate code path to do the job,Stefan Reinauer
2010-02-28- Add config flag for boards that have their own fadt.cPatrick Georgi
2010-02-27- make HAVE_HARD_RESET match what newconfig didPatrick Georgi
2010-02-25Move the ldscripts logic to src/arch/i386/Makefile.incPatrick Georgi
2010-02-25Unify crt0s setup to src/arch/i386/Makefile.inc. This variablePatrick Georgi
2010-02-23Only handle code as "driver" that actually uses our driverPatrick Georgi
2010-02-15Various license header consistency fixes (trivial).Uwe Hermann
2010-02-09Move all the copies of the romstage.inc rule toPatrick Georgi
2010-02-08Clean up ACPI:Patrick Georgi
2010-02-08straighten naming scheme for application processor rom stage files.Stefan Reinauer
2010-02-08janitor task: unify and cleanup naming.Stefan Reinauer
2010-02-07newconfig is no more.Patrick Georgi
2010-01-30* fix crt0s/ldscripts paths to fix out of tree build.Stefan Reinauer
2010-01-25Align several kconfig options to match newconfig:Patrick Georgi
2010-01-18Move all IOAPIC selection to southbridges, and remove themPatrick Georgi
2009-11-27Eliminate special case id.inc/id.lds in favor of a configuration variable ID_...Patrick Georgi
2009-11-27Make newconfig and kconfig agree on MAINBOARD_PCI_SUBSYSTEM_{VENDOR,DEVICE}_IDPatrick Georgi
2009-11-06Remove drivers/pci/onboard. The only purpose was for option ROMs, which areMyles Watson
2009-11-06Drop all pre-CBFS rom_address entries in Config.lb/devicetree.cb.Uwe Hermann
2009-11-06Split the two usages of __ROMCC__:Myles Watson
2009-10-26Define some variables that were not defined. There are a couple left.Myles Watson
2009-10-24Major cleanups of the hard_reset() code and config in coreboot.- supermicro/x6dhe_g/auto.c
2009-10-24move all register fram definitions to arch/register.hStefan Reinauer
2009-10-23Drop dead K8_SCAN_PCI_BUS code. It's a bad idea to scan the PCI busses beforeMyles Watson
2009-10-20Remove CONFIG_CPU_AMD_FAM10 & CONFIG_CPU_AMDK8 from mainboards. They should beMyles Watson
2009-10-20Fix all board names in Kconfig as per wiki / vendor website.Uwe Hermann
2009-10-16Fix AP_CODE_IN_CAR (only selected for two boards), STACK_SIZE, and HEAP_SIZE.Myles Watson
2009-10-16Set default ROM sizes per-board to match the ROM chip that cameUwe Hermann
2009-10-16Change CONFIG_LB_MEM_TOPK to CONFIG_RAMTOP to match CONFIG_RAMBASE.Myles Watson
2009-10-15Add CONFIG_GENERATE_* for tables so that the user can select which tables notMyles Watson
2009-10-09Remaining boards are Kconfig'd now. Whether they workPatrick Georgi
2009-10-07Convert all "default y" options to "select FOO" (shorter).Uwe Hermann
2009-10-07Kconfig:Patrick Georgi
2009-10-06Various fixes to Kconfig: All kconfig-boards should have aPatrick Georgi
2009-10-04This does away with CONFIG_ROM_PAYLOAD_START and CONFIG_PAYLOAD_SIZE.Patrick Georgi
2009-10-03Move HAVE_FAILOVER_BOOT and USE_FAILOVER_IMAGE fromPatrick Georgi
2009-10-03Remove:Patrick Georgi
2009-10-03Remove duplicate and not too useful Kconfig board comments asUwe Hermann
2009-09-29Fix a number of board names in Kconfig (trivial).Uwe Hermann
2009-09-29Remove MAINBOARD_OPTIONS, which is a relic from earlyPatrick Georgi
2009-09-25some progress on kconfig:Patrick Georgi
2009-09-23simplify source tree hierarchy: move files from sdram/ and ram/ to lib/Stefan Reinauer
2009-08-12Kconfig!Patrick Georgi
2009-08-11Enable CBFS everywhere. All boards compiled for me (abuild tested),Patrick Georgi
2009-06-30the tool chain settings should not be in renamed (as they will never live inStefan Reinauer
2009-06-30This patch unifies the use of config options in v2 to all start with CONFIG_Stefan Reinauer
2009-06-06When I started refactoring mainboard Config.lb, I added two differentCarl-Daniel Hailfinger
2009-06-03Revert "CMOS: Add set_option and rework get_option."Luc Verhaegen
2009-06-03CMOS: Add set_option and rework get_option.Luc Verhaegen
2009-05-22Fix MAINBOARD_PART_NUMBER to be h8dme, I forgot to change it from the h8dmrWard Vandewege
2009-05-01Trivial patch to make #defines generated from cmos.layout have unique names. ...Myles Watson
2009-04-30Refactor copy_and_run so that it uses a single code base instead ofPatrick Georgi
2009-04-28Enable HAVE_HIGH_TABLES by default for northbridges withPatrick Georgi
2009-04-28add_mainboard_resources is necessary for some boards (eg. kontron), butPatrick Georgi
2009-04-27Add high tables support for Supermicro H8DME.Ward Vandewege
2009-04-22drop duplicate compiler options that are already mentioned in CFLAGS.Stefan Reinauer
2009-04-21Thanks to Myles' patch adding support for include statements,Carl-Daniel Hailfinger
2009-04-15r4097 broke the tree and it remains unfixed :-( Stefan Reinauer
2009-04-14v2/src romfs->cbfs renamePeter Stuge
2009-04-13I need to do uses HAVE_ACPI_RESUME for each board. Here we go.Rudolf Marek
2009-04-12This patch cleans up the calls to $CC in mainboard Config.lb files. TheyCarl-Daniel Hailfinger
2009-04-11Kill remaining unneeded CAR/ROMCC if-blocks.Carl-Daniel Hailfinger
2009-04-01Drop CONFIG_CHIP_NAME. Those config statements in Config.lb shouldStefan Reinauer
2009-04-01Forgot CONFIG_ROMFS for supermicro/h8dme.Patrick Georgi
2009-03-20Add Supermicro h8dm3 mainboard. This is mostly a copy from the h8dmr.Marc Jones