summaryrefslogtreecommitdiff
path: root/src/mainboard/supermicro/h8dme/Kconfig
AgeCommit message (Collapse)Author
2015-06-05AMD K8 fam10: Refactor Kconfig SB_HT_CHAIN_ON_BUS0Kyösti Mälkki
If SB_HT_CHAIN_ON_BUS0 is selected, HyperTransport chain for System Bus is the first to scan and it will be assigned with bus number 0. If HT_CHAIN_DISTRIBUTE is selected, each link will reserve a fixed range of bus numbers instead of assigning consecutive numbers across all the links. All fam10 have SB_HT_CHAIN_ON_BUS0 selected under northbridge. Follow-up can easily drop this if we find this is dictated by architecture. Change-Id: I8deddcb4c3fd679b6b27e2879d9dba3895c4dd6f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8366 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2014-08-12Kconfig: do not set SB_HT_CHAIN_ON_BUS0 twice to the same valueDaniele Forsi
Change-Id: If7286abf91f758cfbac2c85dcad336f38f70d843 Signed-off-by: Daniele Forsi <dforsi@gmail.com> Reviewed-on: http://review.coreboot.org/6579 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2014-05-03Move ARCH_* from board/Kconfig to cpu or soc Kconfig.Furquan Shaikh
CONFIG_ARCH is a property of the cpu or soc rather than a property of the board. Hence, move ARCH_* from every single board to respective cpu or soc Kconfigs. Also update abuild to ignore ARCH_ from mainboards. Change-Id: I6ec1206de5a20601c32d001a384a47f46e6ce479 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5570 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2013-12-29AMD K8 (rev-F): Always have RAMINIT_SYSINFOKyösti Mälkki
K8 Rev F raminit code cannot be built without RAMINIT_SYSINFO, so have the option enabled together with K8_REV_F_SUPPORT. Also move the option under AMD K8. Change-Id: I91fa0b4ae7e3e54fbcb4a4f91eb043956cd0fb60 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4582 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-06-24AMD: Drop empty root_complexKyösti Mälkki
There are no files to build left under AMD nortbridge/x/root_complex directories. For some cases, even the Kconfig file was no longer sourced. Remove all such references and empty files. For devicetree.cb treat component paths with "/root_complex" in them valid even when the directory does not exists. This is because AMD boards us this dummy chip component as the root node in their devicetree.cb. The generated devicetree file static.c remains unchanged. Change-Id: I9278ebb50a83cebbf149b06afb5669899a8e4d0b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3434 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-05-08Drop CONFIG_AP_CODE_IN_CARStefan Reinauer
This option has not been enabled on any board and was considered obsolete last time it was touched. If we need the functionality, let's fix this in a generic way instead of a K8 specific way. This was mostly a speedup hack back in the day. Change-Id: Ib1ca248c56a7f6e9d0c986c35d131d5f444de0d8 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3211 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-11-28amdk8/amdfam10: Use CAR_GLOBAL for sysinfoPatrick Georgi
This gets rid of the somewhat unstructured placement of AMD's sysinfo structure in CAR. We used to carve out some CAR space using a Kconfig variable, and then put sysinfo there manually (by "virtue" of pointer magic). Now it's a variable with the CAR_GLOBAL qualifier, and build system magic. For this, the following steps were done (but must happen together since the intermediates won't build): - Add new CAR_GLOBAL sysinfo_car - point all sysinfo pointers to sysinfo_car instead of GLOBAL_VAR - remove DCACHE_RAM_GLOBAL_VAR_SIZE - from CAR setup (no need to reserve the space) - commented out code (that was commented out for years) - only copy sizeof(sysinfo) into RAM after ram init, where before it copied the whole GLOBAL_VAR area. - from Kconfig Change-Id: I3cbcccd883ca6751326c8e32afde2eb0c91229ed Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1887 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-11-16Drop CONFIG_HAVE_BUS_CONFIG, clean up KconfigStefan Reinauer
This patch is the beginning of a Kconfig cleanup series - drop CONFIG_HAVE_BUS_CONFIG and add get_bus_conf.c if it exists in the mainboard directory - drop duplicate ACPI_SSDTX_NUM from mainboard Kconfig if it only defines the defaul value of 0 - Add mptable.c, fadt.c, reset.c and ssdtX.asl when they exist, not based on some Kconfig magic Signed-off-by: Stefan Reinauer <reinauer@google.com> Change-Id: Ia14a7116dad6a724af7e531920fee9a51fd0b200 Reviewed-on: http://review.coreboot.org/1832 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-17nvidia/mcp55: Move HAVE_HARD_RESET to southbridgePatrick Georgi
No in-tree board using that chipset has it not selected, so move selection from boards to southbridge. Change-Id: Ibfb7b294aa5007ac2f767d85e090572f85148bad Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/659 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2012-02-07Delete hard-coded driver includesKyösti Mälkki
Driver components are conditionally included in the build using the Kconfig options. Change-Id: I05417ee263a5b82e947600482dfb68f7a3f52d58 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/610 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-03-01Use subsystem id from devicetree.cb instead of Kconfig and moveSven Schnelle
all boards to the new config scheme. Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6421 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-08Move "select CACHE_AS_RAM" lines from boards into CPU socket.Uwe Hermann
All K8/Fam10h boards use CAR, so move the "select CACHE_AS_RAM" into the socket directories, and remove it from the individual boards. Do the same for Intel CPUs/sockets where all boards use CAR. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6151 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-16Move the SET_FIDVID* family of configuration options to Kconfig andPatrick Georgi
make their defaults more obvious. Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6077 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-07Move K8_ALLOCATE_IO_RANGE to Kconfig.Patrick Georgi
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6036 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-05Move QRANK_DIMM_SUPPORT to Kconfig, removing it from romstage.cPatrick Georgi
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6028 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-07Remove duplicate line from pci_ids.h.Jonathan Kollasch
Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net> Acked-by: Jonathan Kollasch <jakllsch@kollasch.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5920 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-05attached patch moves a couple more config flags out of romstage:Patrick Georgi
CK804_USE_NIC, CK804_USE_ACI, CK804_NUM. MCP55_USE_NIC, MCP55_USE_ACI, MCP55_NUM. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> Acked-by: Pter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5912 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-28Remove redundant HW_MEM_HOLE_SIZEK and HW_MEM_HOLE_SIZE_AUTO_INC settings.Myles Watson
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5875 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-10Move memory type information out of some AMD sockets.Myles Watson
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5800 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-30We call this cache as ram everywhere, so let's call it the same in KconfigStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Myles Watson <mylesgw@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5756 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-30Restructured all vendors' Kconfig files to no longer source the boards'Jens Rottmann
Kconfigs from within the choice/endchoice block. This makes it possible to define user visible board specific options. Moved all vendor names and PCI ids to the vendors' Kconfigs. Now all options in each file depend on the same symbol, so replaced all "depends on"s with a single "if". Sorted boards (sort -d), cleaned whitespace. This patch also introduces a dummy option BOARD_SPECIFIC_OPTIONS, which is always "y" and never used. It it simply needed to have something to attach the boards' "select" statements to. Signed-off-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5754 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-03Drop the USE_PRINTK_IN_CAR option. It's a bogus decision to make for any user /Stefan Reinauer
board porter: printk should always be available in CAR mode. Also drop CONFIG_USE_INIT, it's only been selected on one ASROCK board but it's not been used there. Very odd. There is one usage of CONFIG_USE_INIT which was always off in src/cpu/intel/car/cache_as_ram.inc and we have to figure out what to do with those few lines. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5682 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-07-06Re-integrate "USE_OPTION_TABLE" code.Edwin Beasant
Signed-off-by: Edwin Beasant <edwin_beasant@virtensys.com> Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5653 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-07- unify use of SB_HT_CHAIN_UNITID_OFFSET_ONLYStefan Reinauer
- cleanup reset - some minor warning fixes. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5361 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-30drop USE_INIT from mainboard Kconfig files, it's already set in src/KconfigStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5331 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-29This patch drops the coreboot CMOS checksum ranges from Kconfig becauseStefan Reinauer
the information is already specified in cmos.layout. coreboot is changed to use that version instead. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmai.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5313 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-02-28disable AP_CODE_IN_CAR. The K8 code has an alternate code path to do the job,Stefan Reinauer
and it's not working anyways. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5174 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-02-28- Add config flag for boards that have their own fadt.cPatrick Georgi
This should eventually go, as fadt seems to be better put into the southbridge - Add config flag for boards that have get_bus_conf.c Might be cleaned out as well, no idea - Use flags where appropriate. - Move the following rules to src/arch/i386/Makefile.inc: - fadt.o - dsdt.o - acpi_tables.o - get_bus_conf.o - Rename objs_dsl_template in toplevel Makefile to the more appropriate objs_asl_template - Remove all Makefiles that are empty now, which includes src/mainboard/Makefile.k8_CAR.inc and src/mainboard/Makefile.k8_ck804.inc and the include statements that used these files. - Add workaround to intel/xe7501devkit: It uses ACPI in an unusual way: It adds a MADT, but no DSDT. As this is highly unusual, I didn't want to add explicit support for that scenario (and encourage such uses that way), and added a dummy dsdt.asl instead. It will be linked to dsdt.o, but not linked into the final binary. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5171 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-01-25Align several kconfig options to match newconfig:Patrick Georgi
HT_CHAIN_UNITID_BASE HT_CHAIN_END_UNITID_BASE SB_HT_CHAIN_ON_BUS0 SB_HT_CHAIN_UNITID_OFFSET_ONLY MAX_CPUS MAX_PHYSICAL_CPUS ROM_SIZE TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 Also hook up asus/p2b-ds Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5051 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-01-18Move all IOAPIC selection to southbridges, and remove themPatrick Georgi
from mainboards. Some adaptations were necessary after the IOAPIC cleanup, so this should fix the build. Fix intel/d945gclf build, which was missing some ACPI component. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5039 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-11-27Make newconfig and kconfig agree on MAINBOARD_PCI_SUBSYSTEM_{VENDOR,DEVICE}_IDPatrick Georgi
Usually, this means adding values to Kconfig, but in a few cases, adding values to newconfig, too (which doesn't hurt). Also really hook up tyan/s2850 and tyan/s2875 to kconfig, and have them still build. Trivial and stupid kconfig changes, just lots of them. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4959 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-26Define some variables that were not defined. There are a couple left.Myles Watson
Do kbuildall then grep not.defined kbuildall.results/* The interesting ones were GENERATE_* I had to put them in twice to make it work correctly: once outside the menu setting the defaults, and once inside the menu. Now they show up when they should, and are always defined Define HAVE_INIT_TIMER to only exclude the three boards that define it to be 0 in newconfig. Define MEM_TRAIN_SEQ to be an integer and set it correctly. Remove CAR_FAM10 and just depend on NORTHBRIDGE_AMD_AMDFAM10 MOVNTI is a performance enhancement, and should default to 0 so it doesn't break boards that forget to define it. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4856 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-20Remove CONFIG_CPU_AMD_FAM10 & CONFIG_CPU_AMDK8 from mainboards. They should beMyles Watson
selected in sockets, and they aren't used yet. Add a couple of variables to src/Kconfig for lack of a better place so that their selects work. Add select statements according to newconfig for some variables that were defined but never selected in mainboard configs. Fix #if CONFIG_VGA==1 -> #if CONFIG_VGA. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4816 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-20Fix all board names in Kconfig as per wiki / vendor website.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4815 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-16Fix AP_CODE_IN_CAR (only selected for two boards), STACK_SIZE, and HEAP_SIZE.Myles Watson
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4793 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-16Set default ROM sizes per-board to match the ROM chip that cameUwe Hermann
with the respective board. Of course, the user can still override the size in menuconfig. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4790 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-15Add CONFIG_GENERATE_* for tables so that the user can select which tables notMyles Watson
to build, but by default all the tables that are available are built. Make PIRQ table build for qemu. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4778 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-09Remaining boards are Kconfig'd now. Whether they workPatrick Georgi
or not still depends on how close the configuration options are to what they should be. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4751 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-07Convert all "default y" options to "select FOO" (shorter).Uwe Hermann
Also, drop per-board CONSOLE_VGA/PCI_ROM_RUN while I'm at it, they're global options in kconfig. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4735 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-06Various fixes to Kconfig: All kconfig-boards should have aPatrick Georgi
complete set of variables now, though they might still have the wrong values. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4728 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-03Move HAVE_FAILOVER_BOOT and USE_FAILOVER_IMAGE fromPatrick Georgi
boards to global. It's not a per-board value, but compatibility stuff. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4714 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-03Remove duplicate and not too useful Kconfig board comments asUwe Hermann
per discussion on the mailing list. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4711 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-09-29Fix a number of board names in Kconfig (trivial).Uwe Hermann
Also, simplify the M2V-MX SE Kconfig file a bit while I'm at it. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4688 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-09-25some progress on kconfig:Patrick Georgi
- northbridges are done - southbridges are done - Intel CPUs are done, with a design that the board only has to specify the socket it has, and the CPUs are pulled in automatically. There is some more cleanup possible in that area, but I'll do that later - a couple more mainboards compile: - intel/eagleheights - intel/jarrell - intel/mtarvon - intel/truxton - intel/xe7501devkit - sunw/ultra40 - supermicro/h8dme - tyan/s2850 - tyan/s2875 - via/epia - via/epia-cn - via/epia-m - via/epia-m700 - via/epia-n - via/pc2500e (PPC not considered, probably overlooked something) All of them only _build_, but some options are probably completely wrong. To be fixed later Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4673 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 09:58:54 +0000