summaryrefslogtreecommitdiff
path: root/src/mainboard/siemens
AgeCommit message (Collapse)Author
2021-01-27ACPI: Add top-level ASLKyösti Mälkki
Objects that are created with acpigen need to be declared with External () for the generation of dsdt.asl to pass iasl without errors. There are some objects that are common to all platforms, and some that should be declared only conditionally. Having a top-level ASL helps to achieve this. Change-Id: Ibaf1ab9941b82f99e5fa857c0c7e4b6192c74330 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49794 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-21mb/siemens/chili: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to a bootblock gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Change-Id: Iad40b6315a29e7aea612a3e1a169372d296d1d6c Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49443 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-20mb/siemens/{mc_apl1,...,mc_apl6}: Configure FSP-S UPDsMario Scheithauer
Until now some FSP-S parameters were configured for Siemens APL mainboards via the Binary Configuration Tool (BCT). For simplification, the original APL FSP binary should now be used. For this purpose, the corresponding FSP-S parameters are set via devicetree, respectively via mainboard_silicon_init_params accordingly. The following parameters are affected: - Disable CPU power states (C-states) - Set lowest Max Pkg Cstate - PkgC0C1 - Disable PCIe Hot Plug for all enabled RPs - Disable PCIe Transmitter Half Swing for all RPs - Disable PCIe Active State Power Management (ASPM) for all RPs - Disable PCIe L1 Substates for all RPs TEST: - Compare old with new coreboot log on mc_apl5, found no differences - Boot Linux v4.4 and check output of 'lspci' Change-Id: I5af627defd6426140cc9a74bb18db400a8971d72 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49462 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2021-01-15mb/siemens/mc_apl1: do LPC/eSPI pad configuration at board-levelMichael Niewöhner
Do LPC/eSPI pad configuration at board-level to match other platforms. Early gpio configuration was done in romstage, while LPC pads were configured in bootblock. Instead of adding another dedicated gpio table for bootblock, move early gpio configuration completely to bootblock on these boards. This won't hurt, since there is no code touching the pads in between. The soc code gets dropped in CB:49410. Change-Id: I2a614afb305036b0581eac8ed6a723a3f80747b3 Tested-by: Mario Scheithauer <mario.scheithauer@siemens.com> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49413 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2021-01-05mb/siemens/chili: Rework KconfigFelix Singer
Rework Kconfig file so that each variant has its own config option with their specific selects / configuration and move common selects to a seperate config option, which is used as base for each variant. Built chili/base with BUILD_TIMELESS=1, coreboot.rom remains the same. Change-Id: I5e2a09db80232457b2f78ad9b100c468d281f753 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49063 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-12-27mb/siemens/chili/base: Add SMBIOS slot descriptionsFelix Singer
Add SMBIOS slot descriptions for M.2 ports and remove duplicate comments. Change-Id: Ieff03ad3167aec054cdc6b67ddc20fc64394e347 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48389 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-12-08mb/siemens/chili/base: Fix state of PCI devicesFelix Singer
The PCI devices P2SB and PMC are hidden by the FSP and cannot be unhidden, because the FSP locks their configuration. Thus, setting them to `on` is not correct. Therefore, set their state to hidden. Change-Id: Ib7c019cd7f389b2e487829e5550cc236ee5645b7 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48388 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-08mb/siemens/chili: Remove unnecessary device declarationsFelix Singer
Change-Id: I193aea7c92f340bd80a41a3777bcddc3f1339620 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48374 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-06mb/siemens/chili: Move mainboard/gpio.h to variant/gpio.hFelix Singer
Move mainboard/gpio.h to variant/gpio.h and rename its methods to make clear that these methods are implemented on variant level. Change-Id: Ib4e7ec948ca4d019ad82ebc5abe39fc408281cf4 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48299 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-30mb/siemens/chili: Configure GPIOs in gpio.cFelix Singer
Get rid of variant_gpio_table() and configure GPIOs in gpio.c instead of passing data around. Change-Id: Ib158d6bdbcbceb3c1dc4f47fc7c3e098b9c7e5c4 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47974 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-30mb/siemens/chili: Introduce include folder for header filesFelix Singer
Use include folder for header files allowing proper includes. Change-Id: I80066fb925b918d040062397e633c5d499a50dbe Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47973 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-30mb/siemens/mc_apl1: Deduplicate wait_for_legacy_dev()Angel Pons
There's one copy of this function for all variants except mc_apl4. Move one copy into common mainboard.c and exit early if running on mc_apl4. Change-Id: I4e35b58adc074831ccec433b8e014db0695b955e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47402 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-11-30mb/siemens/mc_apl1: Simplify is_mac_adr_valid() logicAngel Pons
A MAC address that is neither 00:00:00:00:00:00 nor ff:ff:ff:ff:ff:ff is considered valid. Instead of using a temporary buffer and memcmp(), use a single loop that exits as soon as the MAC cannot possibly be invalid. Change-Id: I2b15b510092860fbbefd150c9060da38aeb13311 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47405 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com>
2020-11-30drivers/intel/i210: Define MAC_ADDR_LENAngel Pons
Define and use the MAC_ADDR_LEN macro in place of the `6` magic value. Change-Id: Icfa2ad9bca6668bea3d84b10f613d01e437ac6a2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47404 Tested-by: siemens-bot Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-11-30mb/siemens/mc_apl1/mainboard.c: Refactor loop bodyAngel Pons
Break down multi-line compound conditions into multiple if-statements, and leverage `continue` statements to avoid nesting multiple checks. Change-Id: I5edc279a57e25a0dff1a4b42f0bbc88c0659b476 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47403 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Tested-by: siemens-bot Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com>
2020-11-23mb/siemens/mc_apl1: Use `pci_or_config16` functionAngel Pons
Change-Id: I93e09fc9801f6d32cade351bac0cba82f671acfe Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47400 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Tested-by: siemens-bot Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2020-11-23mb/**/cmos.layout: Indent everything with tabsAngel Pons
Time has shown that using spaces never converges into proper alignment. Change-Id: I5338aeaf139580f9eab3e1e02cb910080a95d2c2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47147 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-11-22mb/*: Use ACPI_DSDT_REV_2 instead of hard-coded valueFelix Singer
Change-Id: I6c5b86c348386aa17ee42bdaf34aa388fe6207f9 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47839 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-11-13soc/intel/cnl: replace the remains of HeciEnabled by device state in dtMichael Niewöhner
The option `HeciEnabled` was partly replaced by use of the device on/off state in the devicetree in commit 3de90d1. The option has been removed from the corresponding boards, so `HeciEnabled` is always 0 and ME always gets disabled during soc finalize, when `HECI_DISABLE_USING_SMM` is set. Replace the option in the finalize function by the same dt state check that sets the FSP option and drop the remaints of `HeciEnabled`. Devicetrees still having `HeciEnabled` have been adapted to keep the current behaviour. Change-Id: Ib4cca9099b9aa3434552a41fbafca7cf6a0dd0eb Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47195 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-26mb/*,soc/intel: drop the obsolete dt option `speed_shift_enable`Michael Niewöhner
The dt option `speed_shift_enable` is obsolete now. Drop it. Change-Id: I5ac3b8efe37aedd442962234478fcdce675bf105 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46462 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-10-19mb/siemens/chili: Add Chili variantNico Huber
This Chili mainboard is used in an all-in-one PC. For more information see https://www.secunet.com/fileadmin/user_upload/_temp_/importexport/Print/Factsheets/englisch/SINA_Workstation_H_Client_V_Factsheet_EN_Web.pdf Change-Id: Ic7a5dccbb0d5b7bceb154fb050cf991254475f7b Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Felix Singer <felix.singer@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39995 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Thomas Heijligen <src@posteo.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-19mb/siemens/chili: Add new mainboardThomas Heijligen
The Chili base board is a ruggedized laptop with additional industrial interfaces. So far, only booting and basic interfaces (USB, UART, Video) are working with the original model, the "base" variant. No further development is planned for this variant, as our primary target was another one that will be added in a follow-up. Change-Id: I1d3508b615ec877edc8db756e9ad38132b37219c Signed-off-by: Thomas Heijligen <thomas.heijligen@secunet.com> Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Felix Singer <felix.singer@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39976 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-13{src/mb,util/autoport}: Use macro for DSDT revisionElyes HAOUAS
Change-Id: I5a5f4e7067948c5cc7a715a08f7a5a3e9b391191 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45904 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-10-05mb/siemens/mc_apl6: Enable eMMCMario Scheithauer
Enable eMMC with HS200 mode for mc_apl6 mainboard. TEST: Linux booted and checked with 'lspci'. Change-Id: Ib760a1a26a92047e8916979ffb5001bcff0a6e45 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45898 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-19apollolake boards: Enable CSE in devicetreeSubrata Banik
Enable CSE PCI device Bus 0: Device 0x0f: Function 0x00 to let Intel common cse block code can use this device. Calling me_read_config32(offset) function from ramstage: Without this CL : HECI: Global Reset(Type:1) Command BUG: me_read_config32 requests hidden 00:0f.0 PCI: dev is NULL! With this CL : HECI: Global Reset(Type:1) Command HECI: Global Reset success! Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I97d221ae52b4b03ecd859d708847ad77fe4bf465 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45469 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-09-10mb/siemens/mc_apl2/gpio: Fix code styleMaxim Polyakov
Use the 96 character limit for pad macros. Change-Id: I03fd2f9309c04628c46e3473bed280edc57e215c Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44470 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2020-09-10mb/siemens/mc_apl2/gpio: Undo set DRIVER for GPOMaxim Polyakov
GPIO Driver mode is used for configuration interrupt routing for external devices through GPI. But there is no point in configuring this for GPO. This patch replaces the PAD_CFG_GPO_GPIO_DRIVER macro with others that do not set the corresponding bit in the Host Software Pad Ownership register. Change-Id: I406a08e526a6c655f38e4c0a355957c98e93881c Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44469 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2020-09-09apollolake: Define MAX_CPUS at SoC scopeAngel Pons
The three Intel Apollo Lake boards (apl_rvp, leafhill and minnow3) do not define MAX_CPUS, which would then default to 1. Since this is most likely an oversight, use the same value as other Apollo Lake boards. To ensure this does not happen again, factor out MAX_CPUS to SoC scope. Change-Id: I5ed98a6b592c8010b59eca7ff773ae1ccc4cd7b1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45144 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-09apollolake: Limit MAX_CPUS to 4Angel Pons
APL does not support Hyper-Threading, and has at most four CPU cores. Change-Id: Ib2ffadc0c31cdd96bec8eed5364c984acb2e1250 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45143 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-09mb/siemens/mc_apl1: Use OPCODE menu set up of fast SPI driverWerner Zeh
The common fast SPI driver has a function to set up the SPI OPCODE menu. Use this function here instead of coding it again as it results in the very same register values being written. TEST=Compare register values in both cases and make sure they match. Change-Id: I98457a0b0652f746734ee4204e10acd09b6e5fda Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43166 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: <uwe.poeche@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-30src: Remove whitespaces before tabsElyes HAOUAS
Change-Id: I73695152ec8d8ab2dabf8421ef2405f70de0f4ba Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42795 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-19Kconfig: Escape variable to accommodate new Kconfig versionsPatrick Georgi
Kconfig 4.17 started using the $(..) syntax for environment variable expansion while we want to keep expansion to the build system. Older Kconfig versions (like ours) simply drop the escapes, not changing the behavior. While we could let Kconfig expand some of the variables, that only splits the handling in two places, making debugging harder and potentially messing with reproducible builds (e.g. when paths end up in configs), so escape them all. Change-Id: Ibc4087fdd76089352bd8dd0edb1351ec79ea4faa Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42481 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
Stefan thinks they don't add value. Command used: sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool) The exceptions are for: - crossgcc (patch file) - gcov (imported from gcc) - elf.h (imported from GNU's libc) - nvramtool (more complicated header) The removed lines are: - fmt.Fprintln(f, "/* This file is part of the coreboot project. */") -# This file is part of a set of unofficial pre-commit hooks available -/* This file is part of coreboot */ -# This file is part of msrtool. -/* This file is part of msrtool. */ - * This file is part of ncurses, designed to be appended after curses.h.in -/* This file is part of pgtblgen. */ - * This file is part of the coreboot project. - /* This file is part of the coreboot project. */ -# This file is part of the coreboot project. -# This file is part of the coreboot project. -## This file is part of the coreboot project. --- This file is part of the coreboot project. -/* This file is part of the coreboot project */ -/* This file is part of the coreboot project. */ -;## This file is part of the coreboot project. -# This file is part of the coreboot project. It originated in the - * This file is part of the coreinfo project. -## This file is part of the coreinfo project. - * This file is part of the depthcharge project. -/* This file is part of the depthcharge project. */ -/* This file is part of the ectool project. */ - * This file is part of the GNU C Library. - * This file is part of the libpayload project. -## This file is part of the libpayload project. -/* This file is part of the Linux kernel. */ -## This file is part of the superiotool project. -/* This file is part of the superiotool project */ -/* This file is part of uio_usbdebug */ Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-02acpi: Move ACPI table support out of arch/x86 (3/5)Furquan Shaikh
This change moves all ACPI table support in coreboot currently living under arch/x86 into common code to make it architecture independent. ACPI table generation is not really tied to any architecture and hence it makes sense to move this to its own directory. In order to make it easier to review, this change is being split into multiple CLs. This is change 3/5 which basically is generated by running the following command: $ git grep -iIl "arch/acpi" | xargs sed -i 's/arch\/acpi/acpi\/acpi/g' BUG=b:155428745 Change-Id: I16b1c45d954d6440fb9db1d3710063a47b582eae Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40938 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-04-04mainboard/siemens: Use SPDX for GPL-2.0-only filesAngel Pons
Done with sed and God Lines. Only done for C-like code for now. Change-Id: I7b656f0244774cb174a90d97c5ae1c725802b636 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40099 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-03-31security/vboot: Decouple measured boot from verified bootBill XIE
Currently, those who want to use measured boot implemented within vboot should enable verified boot first, along with sections such as GBB and RW slots defined with manually written fmd files, even if they do not actually want to verify anything. As discussed in CB:34977, measured boot should be decoupled from verified boot and make them two fully independent options. Crypto routines necessary for measurement could be reused, and TPM and CRTM init should be done somewhere other than vboot_logic_executed() if verified boot is not enabled. In this revision, only TCPA log is initialized during bootblock. Before TPM gets set up, digests are not measured into tpm immediately, but cached in TCPA log, and measured into determined PCRs right after TPM is up. This change allows those who do not want to use the verified boot scheme implemented by vboot as well as its requirement of a more complex partition scheme designed for chromeos to make use of the measured boot functionality implemented within vboot library to measure the boot process. TODO: Measure MRC Cache somewhere, as MRC Cache has never resided in CBFS any more, so it cannot be covered by tspi_measure_cbfs_hook(). Change-Id: I1fb376b4a8b98baffaee4d574937797bba1f8aee Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35077 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-03-18mainboard/[^a-p]*: Remove copyright noticesPatrick Georgi
They're listed in AUTHORS and often incorrect anyway, for example: - What's a "Copyright $year-present"? - Which incarnation of Google (Inc, LLC, ...) is the current copyright holder? - People sometimes have their editor auto-add themselves to files even though they only deleted stuff - Or they let the editor automatically update the copyright year, because why not? - Who is the copyright holder "The coreboot project Authors"? - Or "Generated Code"? Sidestep all these issues by simply not putting these notices in individual files, let's list all copyright holders in AUTHORS instead and use the git history to deal with the rest. Change-Id: I18e513cefc373b1cd70d31d1159928cc948a8476 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39609 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2020-03-03mb/*/Kconfig: Factor out MAINBOARD_VENDORAngel Pons
Only some mainboard vendors have a prompt for this option. Let's be fair and give this ability to everyone. Change-Id: I03eec7c13d18b42e3c56fb1a43dc665d5dbd1145 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39179 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-01-10src: Remove blank acpi_tables source filesKarthikeyan Ramasubramanian
Due to build rules, dummy acpi_tables source files were added in many mainboards. With commit 1e83e5c61a3aa98f58f7d8cbf8d1eb9532896cc3 ("src/arch/x86: Build mainboard acpi_tables source if present"), the build system will build mainboard acpi_tables only if present. Remove the dummy/empty/blank acpi_tables source files. BUG=None TEST=Build test with some google mainboards. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I0cef34368e2e5f5e3b946b22658ca10c7caad90a Reviewed-on: https://review.coreboot.org/c/coreboot/+/37854 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-12-31mb/**/dsdt.asl: Remove outdated sleepstates.asl commentAngel Pons
Previously, each Intel chipset had its own sleepstates.asl file. However, this is no longer the case, so drop these comments. Change-Id: I50aba6e74f41e2fa498375b5eb6b7e993d06bcac Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37855 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-12-21mb/**/dsdt.asl: Remove "Some generic macros" commentAngel Pons
It provides no useful information, so it might as well vanish. Change-Id: I0df6f4639a16058486c2e2d40fe4067d65670731 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37856 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-12-20src/mainboard: Remove unused '#include <device/pci.h>'Elyes HAOUAS
Change-Id: I5791fddec8b2387df5979adbb1a0fa64c5dd23ea Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37522 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-11-23Kconfig: comply to Linux 5.3's Kconfig language rulesPatrick Georgi
Kconfig became stricter on what it accepts, so accomodate before updating to a new release. Change-Id: I92a9e9bf0d557a7532ba533cd7776c48f2488f91 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37156 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-11-21mb/*/*: Remove BROADWELL_DE boardsArthur Heymans
Relocatable ramstage, postcar stage and C_ENVIRONMENT_BOOTBLOCK are now mandatory features, which this platform lacks. Change-Id: I3d9b6bb48bfd15c0182448f774e9af1e0c944fd5 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36983 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-11-21mb/*/*: Drop FSP_BAYTRAIL supportArthur Heymans
Relocatable ramstage, postcar stage and C_ENVIRONMENT_BOOTBLOCK are now mandatory features, which this platform lacks. Change-Id: I08c21fd7e5cf8996911c3912bdbaf12d6450db42 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36981 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-11-12src/mainboard/siemens: Use PTN3460 chip driverUwe Poeche
This patch replaces and cleans up the redundant PTN3460 driver files in /mainboard/siemens directories by using the now available driver in src/drivers/i2c/ptn3460 and providing mainboard specific functions to the driver. TEST=Display is working on Siemens mainboards (e.g. mc_tcu3, mc_apl1, ...). Change-Id: I976a502e7176a356bab772758250db3cdff529b9 Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36643 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-12mb/siemens/mc_apl6: Enable VT-d featureWerner Zeh
This mainboard needs VT-d to be enabled. Do so in devicetree. Change-Id: I9f2f733163be019ac329660d7633b48c5d7896f1 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36749 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2019-11-11mb/siemens/mc_apl6: Add TPM to devicetreeWerner Zeh
The TPM chip needs to be added to the devicetree so that the ACPI tables will be generated for it. These ACPI table entry is used by the OS to get the location of the TPM chip. Change-Id: Ic40d1cf236dd849f04f088808d94b6dd81e3238a Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36677 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2019-11-11mb/siemens/mc_apl6: Enable SDHCI and disable eMMC controllerWerner Zeh
This mainboard variant uses SD-card and not eMMC. Therefore eMMC controller is disabled while SDHCI is enabled. Change-Id: I40b314905730b5d74c674d2251f8a4e5c807805f Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36676 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-11mb/siemens/mc_apl6: Adjust clock lines used on PCIe-2-PCI bridgeWerner Zeh
On this mainboard variant the PCIe-2-PCI bridge is used a bit different. Adjust the switched off clock lines to match the mainboard configuration. Change-Id: I16f3b6eed0948c8201baecdfbb8052c6c1c335c8 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36671 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2019-11-11mb/siemens/mc_apl6: Enable VBOOT per defaultWerner Zeh
mc_apl6 uses VBOOT scheme so enable it as default. Change-Id: I341180f3815ff9f3b2db801d9d989119a2585b03 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36669 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2019-11-11mb/siemens/mc_apl6: Add new mainboard based on mc_apl3Werner Zeh
This patch adds a new mainboard variant called mc_apl6 which is based on mc_apl3. So far only the names have been adjusted with no further changes. Following commits will introduce the needed changes for this mainboard variant. Change-Id: Ic935f6cc1f037947b2c167696d40da8309e4d4f0 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36668 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2019-11-01soc/intel/{IA-CPU/SOC}: Move sleepstates.asl into southbridge/intel/common/acpiSubrata Banik
This patch creates a common instance of sleepstates.asl inside intel common code (southbridge/intel/common/acpi) and asks all IA CPU/SOC code to refer sleepstates.asl from common code block. TEST=Able to build and boot Hatch and ICL DE system. Dump DSDT.asl to verify S0/S3/S4/S5 entries after booting to OS. Change-Id: Ie2132189f91211df74f8b5546da63ded4fdf687a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36463 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-27src: Use 'include <boot/coreboot_tables.h>' when appropriateElyes HAOUAS
Change-Id: I3d90e46ed391ce323436750c866a0afc3879e2e6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36359 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-24mb/siemens/{mc_apl1, mc_bdx1}: Remove offsets from flashmap filesWerner Zeh
As fmaptool can now handle the offset computation for every mentioned region in the fmap file on its own there is no need to provide the offset in the fmd file anymore. This patch clears this out so that the files are way more readable now. Change-Id: I1dc841604fdb662e08cb6690ff4bf6dd311e01d8 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36234 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2019-10-24soc/intel/fsp_baytrail: use designware I2C driverUwe Poeche
Refactor I2C driver for fsp_baytrail to match the coreboot supported I2C bus device structure. The internal I2C controllers are now handled by the generic PCI driver approach and generic I2C access is enabled. As orientation for the I2C code the actual solution from soc/intel/apollolake I2C was taken. All the I2C specific parts were removed from lpss.c and have been implemented in the I2C driver. Future merge to soc/intel/common/block/i2c/i2c.c would be possible. With this patch I2C chip devices can now be used in devicetree. TEST=Booted siemens/tcu3 and verified that access to PTN3460 worked. Change-Id: I3b87bd7c27e4c1afcce7cd4225cca02599f43c60 Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36062 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-10-18mb/siemens/mc_apl{3,5}: Remove __weak symbol from GPIO functionsWerner Zeh
The two GPIO functions variant_gpio_table() and variant_early_gpio_table() provide the pointer to the variants GPIO table for late and early GPIO init. As these functions are variant dependent the keyword __weak must not be used as otherwise the linker might choose the tables from the baseboard. This patch removes the __weak definition making these functions overriding the general ones in baseboard/gpio.c. Change-Id: Ic7fc816d40cb112d7ab51089c3962a77798c08a8 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36094 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-30mb/siemens/mc_bdx1: Enable VBOOTWerner Zeh
Enable VBOOT in Kconfig and provide a flashmap that includes all the needed sections for VBOOT support. Change-Id: Iee12a5d1781c869b20bc14a52ecbf23474caa3fd Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35594 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-09-25mb/siemens/mc_apl1: Sort the names of all variant mainboardsWerner Zeh
Sort the names of all variant mainboards in an ascending order. Change-Id: I19d502298744c0e0cbc91eb836c62ca90cdb9a5c Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35556 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-09-25mb/siemens/mc_apl{2,4,5}: Enable VBOOTWerner Zeh
Enable VBOOT in Kconfig and provide a flashmap that includes all the needed sections for VBOOT support. Change-Id: I3d58094256d2730dbd249291a8f1ed8df9dfe62d Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35552 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-09-16src/mainboard: Remove unused include <device/pci_ops.h>Elyes HAOUAS
Change-Id: Icdbccb3af294dd97ba1835f034669198094a3661 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33528 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-11src: Remove unneeded include <arch/interrupt.h>Elyes HAOUAS
Change-Id: I3323d25b72dab2f9bc8a575ba41faf059ee1ffc4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34933 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-09-05mb/siemens/mc_apl5: Disable IGD if no EDID data availableMario Scheithauer
To avoid possible panel failures due to incorrect timing settings for PTN3460, the internal graphic device should be disabled. Change-Id: Ie0b9ed99fb78461bb48d6f2ff328643cd8c2cd15 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35242 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-07-18mb/siemens/{mc_apl1,...,mc_apl5}: Fix GPIO settingsMario Scheithauer
Correct all GPIOs with reference to the Apollo Lake SoC EDS Vol 4 revision 2.4 chapter 10.1.2.3 List of Pins that are GPIOs but cannot be used in Function 0 (GPIO) mode. In additional, set an internal pull to any GPI that does not have an external resistor so that the input is not in an undefined state. Change-Id: Ia8fe457eddbed0f4ee6bff9ef9dd7a92545be40b Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34379 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com>
2019-07-18mb/siemens/mc_apl1: Disable all UHS-I SD-Card speed modesMario Scheithauer
The limitation for SD-Card was originally only made for mc_apl2 mainboard. Since other mc_apl mainboards also use the SD-Card interface, the speed mode setting is made in the parent mainboard_final. In additional, all UHS-I bus speed modes are disabled because of a limitation for industry use cases. This means that only HS mode is permitted. Change-Id: I2f1b51f13a53c2507c52d6a169d6384b8570b3bc Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34377 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-07-12mb/siemens/mc_apl3: Enable LPSS UART 1Mario Scheithauer
By setting the GPIOs 42 and 43 to native function 1 the LPSS UART 1 is activated. Change-Id: I74abd1b6fb5459cf11a5bdee182c99462f613b7a Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34238 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-07-11mb/siemens/{baseboard,mc_apl3,mc_apl4,mc_apl5}: Fix GPIO_168Mario Scheithauer
This GPIO is corrected with reference to the Apollo Lake SoC EDS Vol 4 revision 2.4 chapter 10.1.2.3 List of Pins that are GPIOs but cannot be used in Function 0 (GPIO) mode. Change-Id: I98628ade3a1e19730ca6e6b4a63c28e6816176ce Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34197 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-07-11mb/siemens/{mc_apl1,...,mc_apl5}: Reduce eMMC bus speed modeMario Scheithauer
We need to reduce the eMMC bus speed for these Apollo Lake mainboards because of a limitation on Intel side for industry use cases. Change-Id: Ide6a1a302001c0752d149bfdab175a27c8f8cc35 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34196 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-07-08intel/fsp_broadwell_de: Remove redundant TSC_MONOTONIC_TIMERKyösti Mälkki
Change-Id: I240e9e767c9b38b3b06d3978fd20ddb37a96e470 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34109 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-07-08intel/fsp_baytrail: Move TSC_MONOTONIC_TIMERKyösti Mälkki
Change-Id: Ib61ea29724401146eb6f008374cdf599f418e81f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34108 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-06-21siemens/mc_apl5: Change PTN interface settingsMario Scheithauer
Switch the default clock output for single LVDS mode to odd bus only. Change-Id: I278e761566a112d95cbd6c79e09c076d70b93e8f Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33196 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-06-21siemens/mc_apl5: Enable TPM supportMario Scheithauer
This patch enables TPM on SPI and adds the needed devicetree entry for mc_apl5. TEST=Build coreboot for mc_apl5 board and check the TPM console output. In addition the TPM was correctly verified by our Linux driver. Change-Id: Iafc967c7a2bfee9bdb9b6591d12328620e2887cc Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33173 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06siemens/mc_apl5: Add own GPIO tableMario Scheithauer
Because of some differences to the baseboard this board variant needs its own GPIO table. Change-Id: Ie3424cb0b867c5d43cd7db9e9ae654196cef5e90 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33172 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-05-29src/mainboard: Add missing 'include <types.h>'Elyes HAOUAS
<types.h> is supposed to provide <stdint.h> and <stddef.h>. So when <types.h> is included, <stdint.h> and/or <stddef.h> is removed. Change-Id: I3b1a395cfe8b710fb6b468e68f4c92e063794568 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32811 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-05-06mb/siemens/mc_apl2: Limit SD-Card speed to DDR50Werner Zeh
Due to PCB limitations the SD-Card interface is not able to operate with the highest frequency reliably. The OS driver will switch to the highest mode if a SD-Card is attached which supports this high frequency mode. In order to work around this PCB limitation disable the high frequency modes in the controller capabilities (SDR104 and HS400 mode) and leave SDR50 and DDR50 enabled. Change-Id: Ia5fed5fb70b027de34170b49620927614a00fb7a Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32542 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-04-15mb/siemens/mc_apl4: Remove usage of external RTCWerner Zeh
The external RTC was removed on the mainboard as it is not needed. Remove the usage of the driver for RX6110SA as well. Change-Id: Ia476e58c0b0f343d4e9e4fa6039bf82b194a87d3 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32302 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com>
2019-04-15mb/siemens/mc_apl1: Enable HDA in devicetree for all mainboard variantsWerner Zeh
With commit '4074ce0cc7 (intel/apollolake: Add HDA to disable_dev function)' FSP is now requested to switch off HDA PCI device if it is disabled in devicetree. Doing so results in a warm restart. Normally this event will be stored in CMOS RAM (if the descriptor is configured to do so) and therefore no further resets are requested by FSP on the next boots as long as CMOS RAM is kept alive. The Siemens mainboards based on Apollo Lake do not have a CMOS battery and therefore the CMOS is not backed up. This leads to reset requests from FSP after PCI enumeration on every boot. To avoid this reset enable HDA in devicetree for these mainboards. Though we do not have any usage of HDA it should not be an issue that the HDA device is now enabled. The benefit is though that no reset is requested anymore by FSP. Change-Id: I637c7c01d73350700c6066fee74fecbb5b93b221 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32295 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-08siemens/mc_apl5: Remove reduced clock rate for I2C0Mario Scheithauer
There is no device on I2C0 which requires a lower clock rate. Change-Id: Iaf01be5ea4839c54eb2f0ba95bca272970c24bdb Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32139 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-04-06src: Use include <delay.h> when appropriateElyes HAOUAS
Change-Id: I23bc0191ca8fcd88364e5c08be7c90195019e399 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32012 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: David Guckian
2019-04-04siemens/mc_apl4: Provide CLK on APL Pin PMU_SUSCLKUwe Poeche
This patch provides a clock on Pin PMU_SUSCLK. This is necessary for correct function of the SMARC module. Test=mc_apl4 flashed, booted into Linux, ckecked CLK with scope Change-Id: Ieb1d66b5a09363c9bed2b19e7a204f206ee04158 Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32168 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-21mb/siemens/mc_apl1: use comment in Kconfig.nameThomas Heijligen
Change-Id: I3c8791a0ed7b3bc670cf1433fa58f9b3d68e0b97 Signed-off-by: Thomas Heijligen <thomas.heijligen@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31969 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-03-20src: Use 'include <string.h>' when appropriateElyes HAOUAS
Drop 'include <string.h>' when it is not used and add it when it is missing. Also extra lines removed, or added just before local includes. Change-Id: Iccac4dbaa2dd4144fc347af36ecfc9747da3de20 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-03-18src: Drop unused 'include <romstage_handoff.h>'Elyes HAOUAS
Change-Id: I311269967949533264e44fd3bb29ad3a06056653 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31941 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-03-15mb/mc_apl1/variants/mc_apl5: Drop unused '#include <lib.h>'Elyes HAOUAS
Change-Id: I380ffe1348731b8c84855047e057365bec94a08c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31861 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-03-12src: Drop unused 'include <arch/acpigen.h>'Elyes HAOUAS
Use <arch/acpi.h> when appropriate. Change-Id: I05a28d2c15565c21407101e611ee1984c5411ff0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31781 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-03-08coreboot: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX)Julius Werner
This patch is a raw application of find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g' Change-Id: I6262d6d5c23cabe23c242b4f38d446b74fe16b88 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-07src: Drop unused include <timestamp.h>Elyes HAOUAS
Change-Id: I7e181111cd1b837382929071a350b94c3afc1aaa Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31784 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-03-06src: Drop unused include <arch/acpi.h>Elyes HAOUAS
Change-Id: I1f44ffeb54955ed660162a791c6281f292b1116a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31715 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-03-06mb/siemens/{mc_apl1,mc_tcu3}: Fix typo on "Display"Elyes HAOUAS
Change-Id: I58ecd95a8427eba87611dd8ea4616aedbb1d01c9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31761 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-03-04device/mmio.h: Add include file for MMIO opsKyösti Mälkki
MMIO operations are arch-agnostic so the include path should not be arch/. Change-Id: I0fd70f5aeca02e98e96b980c3aca0819f5c44b98 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31691 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-04arch/io.h: Drop unnecessary includeKyösti Mälkki
Change-Id: I91158452680586ac676ea11c8589062880a31f91 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31692 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-04arch/io.h: Add missing includesKyösti Mälkki
Fixes indirect includes that would break with followup work. Change-Id: I37ca01b904a0b422a4d09475377e755e167a6ab3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31697 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-03-01device/pci: Fix PCI accessor headersKyösti Mälkki
PCI config accessors are no longer indirectly included from <arch/io.h> use <device/pci_ops.h> instead. Change-Id: I2adf46430a33bc52ef69d1bf7dca4655fc8475bd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31675 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-03-01mb/siemens/mc_bdx1: Enable TPM2 on LPCWerner Zeh
This mainboard has a TPM located on the LPC bus. Enable the driver for it so that it is initialized and the ACPI table entry is generated. Change-Id: I2eae63932658c2a9f752d28d7c08c27f48531360 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/31663 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-02-13siemens/mc_apl4: Enable HW SPI TPM on mainboard mc_apl4Uwe Poeche
This patch enables TPM2 on LPC and adds the needed devicetree entry for TPM for mc_apl4. Test=mc_apl4 flashed, booted into Linux and checked via dmesg if TPM is present Change-Id: I9af7e1a8623302eca46f5ecd8e498678ccda92ad Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com> Reviewed-on: https://review.coreboot.org/c/31344 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-02-13siemens/mc_apl2: Remove double entry from devicetreeMario Scheithauer
Remove a double entry for LPC device from devicetree. Change-Id: Ib5b4f760251236d6a8b4aba719666daa97e7813d Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/31345 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-02-05mb/siemens/mc_apl1: Enable VTD for mc_apl2 and mc_apl5Werner Zeh
These boards need a working VTD therefore enable this feature. Change-Id: I74c64bf1bd66188c4c32b85c66683dafd0e1fd38 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/31195 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2019-01-30siemens/mc_apl2: Change SERIRQ modeMario Scheithauer
Because of Intel's faulty LPC clock, the SERIRQ mode must be corrected. By removing this entry from devicetree, the default value (quiet mode) is used. The problem is described in Intel document 334820-007 under point APL47. Change-Id: I7a45e0e5fcde17a20abd19a33282b8a9215b1480 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/31138 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-30siemens/mc_apl2: Correct whitespace of devicetreeMario Scheithauer
Change-Id: Ie0e11b1ce6c6acb1b74ce1196304f7e6ac4664d9 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/31137 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-01-30siemens/mc_apl2: Activate TPM supportMario Scheithauer
The TPM chip is connected to the SPI interface of APL. The proper chip select pin needs to be used in order to access the TPM in the memory mapped space. This needed chip select is internally (inside APL) routable to GPIO 106. Therefore the change of GPIO 106 mode is needed to make the TPM work on SPI bus. TEST=Build coreboot for mc_apl2 board and check the TPM console output. In addition the TPM was correctly verified by our Linux driver. Change-Id: I2b0d5a6f2c230187857c2428a70de61f21da6724 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/31125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>