Age | Commit message (Expand) | Author |
2021-07-14 | mb/siemens/chili: Drop ineffective `SaGv` setting | Angel Pons |
2021-07-13 | mb/siemens/chili: Use CHIPSET_LOCKDOWN_COREBOOT | Felix Singer |
2021-07-07 | mb/siemens/mc_ehl: Switch to 16 MB ROM and provide a flashmap | Werner Zeh |
2021-07-07 | mb/siemens/mc_ehl: Clean up Kconfig | Werner Zeh |
2021-07-05 | mb/siemens/mc_ehl: Provide a proper scheme for variants | Werner Zeh |
2021-07-05 | mb/siemens/mc_ehl: Add new mainboard based on elkhartlake_crb | Werner Zeh |
2021-06-29 | Kconfig: Escape variables | Patrick Georgi |
2021-06-04 | mb/siemens/mc_apl2: Disable unused I2C controllers | Werner Zeh |
2021-06-04 | mb/siemens/mc_apl{1,2,3,5,6}: Provide I2C timings for 400 kHz | Werner Zeh |
2021-05-30 | mb/siemens/mc_apl{1,2,3,5,6}: Disable ACPI-support for RX6110 | Werner Zeh |
2021-05-30 | mb/siemens/mc_apl1: Move gpio.c from baseboard to mc_apl1 | Mario Scheithauer |
2021-05-30 | mb/siemens/{mc_apl2,...,mc_apl6}: Do early UART pad configuration | Mario Scheithauer |
2021-05-06 | src: Retype option API to use unsigned integers | Angel Pons |
2021-05-02 | mb/siemens/mc_apl{1,2,3,5,6}: Tune I2C frequency | Werner Zeh |
2021-04-22 | soc/intel/cannonlake: Set DIMM_SPD_SIZE to 512 | Felix Singer |
2021-04-21 | mainboard: Use read_int_option() | Angel Pons |
2021-02-16 | mb/siemens/mc_apl1/variants/mc_apl2/mainboard.c: Clean includes | Elyes HAOUAS |
2021-02-15 | src/mb: Remove unused <console/console.h> | Elyes HAOUAS |
2021-02-11 | src/mainboard: Remove unneeded whitespace before tab | Elyes HAOUAS |
2021-02-10 | mb/siemens/mc_apl2: Switch I2C bus for RX6110SA | Mario Scheithauer |
2021-02-02 | mb/siemens/mc_apl1: do UART pad configuration at board-level | Michael Niewöhner |
2021-01-27 | ACPI: Add top-level ASL | Kyösti Mälkki |
2021-01-21 | mb/siemens/chili: do UART pad configuration at board-level | Michael Niewöhner |
2021-01-20 | mb/siemens/{mc_apl1,...,mc_apl6}: Configure FSP-S UPDs | Mario Scheithauer |
2021-01-15 | mb/siemens/mc_apl1: do LPC/eSPI pad configuration at board-level | Michael Niewöhner |
2021-01-05 | mb/siemens/chili: Rework Kconfig | Felix Singer |
2020-12-27 | mb/siemens/chili/base: Add SMBIOS slot descriptions | Felix Singer |
2020-12-08 | mb/siemens/chili/base: Fix state of PCI devices | Felix Singer |
2020-12-08 | mb/siemens/chili: Remove unnecessary device declarations | Felix Singer |
2020-12-06 | mb/siemens/chili: Move mainboard/gpio.h to variant/gpio.h | Felix Singer |
2020-11-30 | mb/siemens/chili: Configure GPIOs in gpio.c | Felix Singer |
2020-11-30 | mb/siemens/chili: Introduce include folder for header files | Felix Singer |
2020-11-30 | mb/siemens/mc_apl1: Deduplicate wait_for_legacy_dev() | Angel Pons |
2020-11-30 | mb/siemens/mc_apl1: Simplify is_mac_adr_valid() logic | Angel Pons |
2020-11-30 | drivers/intel/i210: Define MAC_ADDR_LEN | Angel Pons |
2020-11-30 | mb/siemens/mc_apl1/mainboard.c: Refactor loop body | Angel Pons |
2020-11-23 | mb/siemens/mc_apl1: Use `pci_or_config16` function | Angel Pons |
2020-11-23 | mb/**/cmos.layout: Indent everything with tabs | Angel Pons |
2020-11-22 | mb/*: Use ACPI_DSDT_REV_2 instead of hard-coded value | Felix Singer |
2020-11-13 | soc/intel/cnl: replace the remains of HeciEnabled by device state in dt | Michael Niewöhner |
2020-10-26 | mb/*,soc/intel: drop the obsolete dt option `speed_shift_enable` | Michael Niewöhner |
2020-10-19 | mb/siemens/chili: Add Chili variant | Nico Huber |
2020-10-19 | mb/siemens/chili: Add new mainboard | Thomas Heijligen |
2020-10-13 | {src/mb,util/autoport}: Use macro for DSDT revision | Elyes HAOUAS |
2020-10-05 | mb/siemens/mc_apl6: Enable eMMC | Mario Scheithauer |
2020-09-19 | apollolake boards: Enable CSE in devicetree | Subrata Banik |
2020-09-10 | mb/siemens/mc_apl2/gpio: Fix code style | Maxim Polyakov |
2020-09-10 | mb/siemens/mc_apl2/gpio: Undo set DRIVER for GPO | Maxim Polyakov |
2020-09-09 | apollolake: Define MAX_CPUS at SoC scope | Angel Pons |
2020-09-09 | apollolake: Limit MAX_CPUS to 4 | Angel Pons |
2020-07-09 | mb/siemens/mc_apl1: Use OPCODE menu set up of fast SPI driver | Werner Zeh |
2020-06-30 | src: Remove whitespaces before tabs | Elyes HAOUAS |
2020-06-19 | Kconfig: Escape variable to accommodate new Kconfig versions | Patrick Georgi |
2020-05-11 | treewide: Remove "this file is part of" lines | Patrick Georgi |
2020-05-02 | acpi: Move ACPI table support out of arch/x86 (3/5) | Furquan Shaikh |
2020-04-04 | mainboard/siemens: Use SPDX for GPL-2.0-only files | Angel Pons |
2020-03-31 | security/vboot: Decouple measured boot from verified boot | Bill XIE |
2020-03-18 | mainboard/[^a-p]*: Remove copyright notices | Patrick Georgi |
2020-03-03 | mb/*/Kconfig: Factor out MAINBOARD_VENDOR | Angel Pons |
2020-01-10 | src: Remove blank acpi_tables source files | Karthikeyan Ramasubramanian |
2019-12-31 | mb/**/dsdt.asl: Remove outdated sleepstates.asl comment | Angel Pons |
2019-12-21 | mb/**/dsdt.asl: Remove "Some generic macros" comment | Angel Pons |
2019-12-20 | src/mainboard: Remove unused '#include <device/pci.h>' | Elyes HAOUAS |
2019-11-23 | Kconfig: comply to Linux 5.3's Kconfig language rules | Patrick Georgi |
2019-11-21 | mb/*/*: Remove BROADWELL_DE boards | Arthur Heymans |
2019-11-21 | mb/*/*: Drop FSP_BAYTRAIL support | Arthur Heymans |
2019-11-12 | src/mainboard/siemens: Use PTN3460 chip driver | Uwe Poeche |
2019-11-12 | mb/siemens/mc_apl6: Enable VT-d feature | Werner Zeh |
2019-11-11 | mb/siemens/mc_apl6: Add TPM to devicetree | Werner Zeh |
2019-11-11 | mb/siemens/mc_apl6: Enable SDHCI and disable eMMC controller | Werner Zeh |
2019-11-11 | mb/siemens/mc_apl6: Adjust clock lines used on PCIe-2-PCI bridge | Werner Zeh |
2019-11-11 | mb/siemens/mc_apl6: Enable VBOOT per default | Werner Zeh |
2019-11-11 | mb/siemens/mc_apl6: Add new mainboard based on mc_apl3 | Werner Zeh |
2019-11-01 | soc/intel/{IA-CPU/SOC}: Move sleepstates.asl into southbridge/intel/common/acpi | Subrata Banik |
2019-10-27 | src: Use 'include <boot/coreboot_tables.h>' when appropriate | Elyes HAOUAS |
2019-10-24 | mb/siemens/{mc_apl1, mc_bdx1}: Remove offsets from flashmap files | Werner Zeh |
2019-10-24 | soc/intel/fsp_baytrail: use designware I2C driver | Uwe Poeche |
2019-10-18 | mb/siemens/mc_apl{3,5}: Remove __weak symbol from GPIO functions | Werner Zeh |
2019-09-30 | mb/siemens/mc_bdx1: Enable VBOOT | Werner Zeh |
2019-09-25 | mb/siemens/mc_apl1: Sort the names of all variant mainboards | Werner Zeh |
2019-09-25 | mb/siemens/mc_apl{2,4,5}: Enable VBOOT | Werner Zeh |
2019-09-16 | src/mainboard: Remove unused include <device/pci_ops.h> | Elyes HAOUAS |
2019-09-11 | src: Remove unneeded include <arch/interrupt.h> | Elyes HAOUAS |
2019-09-05 | mb/siemens/mc_apl5: Disable IGD if no EDID data available | Mario Scheithauer |
2019-07-18 | mb/siemens/{mc_apl1,...,mc_apl5}: Fix GPIO settings | Mario Scheithauer |
2019-07-18 | mb/siemens/mc_apl1: Disable all UHS-I SD-Card speed modes | Mario Scheithauer |
2019-07-12 | mb/siemens/mc_apl3: Enable LPSS UART 1 | Mario Scheithauer |
2019-07-11 | mb/siemens/{baseboard,mc_apl3,mc_apl4,mc_apl5}: Fix GPIO_168 | Mario Scheithauer |
2019-07-11 | mb/siemens/{mc_apl1,...,mc_apl5}: Reduce eMMC bus speed mode | Mario Scheithauer |
2019-07-08 | intel/fsp_broadwell_de: Remove redundant TSC_MONOTONIC_TIMER | Kyösti Mälkki |
2019-07-08 | intel/fsp_baytrail: Move TSC_MONOTONIC_TIMER | Kyösti Mälkki |
2019-06-21 | siemens/mc_apl5: Change PTN interface settings | Mario Scheithauer |
2019-06-21 | siemens/mc_apl5: Enable TPM support | Mario Scheithauer |
2019-06-06 | siemens/mc_apl5: Add own GPIO table | Mario Scheithauer |
2019-05-29 | src/mainboard: Add missing 'include <types.h>' | Elyes HAOUAS |
2019-05-06 | mb/siemens/mc_apl2: Limit SD-Card speed to DDR50 | Werner Zeh |
2019-04-15 | mb/siemens/mc_apl4: Remove usage of external RTC | Werner Zeh |
2019-04-15 | mb/siemens/mc_apl1: Enable HDA in devicetree for all mainboard variants | Werner Zeh |
2019-04-08 | siemens/mc_apl5: Remove reduced clock rate for I2C0 | Mario Scheithauer |
2019-04-06 | src: Use include <delay.h> when appropriate | Elyes HAOUAS |