summaryrefslogtreecommitdiff
path: root/src/mainboard/siemens
AgeCommit message (Expand)Author
2021-10-11mb/siemens/mc_ehl2: Disable INTEL_LPSS_UART_FOR_CONSOLEMario Scheithauer
2021-10-11mb/siemens/mc_ehl2: Adjust GPIOsMario Scheithauer
2021-10-11mb/siemens/mc_ehl2: Disable SATA Port 0Mario Scheithauer
2021-10-11mb/siemens/mc_ehl2: Enable SD-CardMario Scheithauer
2021-10-11mb/siemens/mc_ehl2: Move RTC RX6110SA from SMBus to I2C2Mario Scheithauer
2021-10-11mb/siemens/mc_ehl2: Update SPD for DDR4 devicesMario Scheithauer
2021-10-01mb/siemens/mc_ehl: Move UART_FOR_CONSOLE switch to variant levelWerner Zeh
2021-10-01mb/siemens/mc_ehl: Add a new variant mc_ehl2Werner Zeh
2021-10-01mb/siemens/mc_ehl1: Enable LPSS UARTWerner Zeh
2021-09-03src/*: Specify type of `DIMM_SPD_SIZE` onceAngel Pons
2021-08-28soc/intel/common: Use CHIPSET_LOCKDOWN_COREBOOT by defaultFelix Singer
2021-08-13mb/{kontron/bsl6,siemens/chili}: Add `inhibit_flashlock` nvram optionNico Huber
2021-08-02mb/siemens/mc_ehl: Enable master bit in PCI config space if allowedWerner Zeh
2021-08-02mb/siemens/mc_ehl: Add code to wait for legacy devices before PCI scanWerner Zeh
2021-07-29mb/siemens/mc_ehl1: Disable LTR for all PCIe root portsWerner Zeh
2021-07-29mb/siemens/mc_ehl1: Disable L1 substates for PCIe root portsWerner Zeh
2021-07-29mb/siemens/mc_ehl1: Enable Intel I210 MACPHY driverWerner Zeh
2021-07-29mb/siemens/mc_ehl: Enable Siemens NC-FPGA driverWerner Zeh
2021-07-29mb/siemens/mc_ehl: Enable SIEMENS_HWILIBWerner Zeh
2021-07-29mb/siemens/mc_ehl1: Enable In Band ECCWerner Zeh
2021-07-29mb/siemens/mc_ehl1: Disable System Agent dynamic frequency supportWerner Zeh
2021-07-29mb/siemens/mc_ehl: Enable measured bootWerner Zeh
2021-07-29mb/siemens/mc_ehl: Enable LPC TPMWerner Zeh
2021-07-29mb/siemens/mc_ehl: Add external RTC RX6110SAWerner Zeh
2021-07-26mb/*: Specify type of `VARIANT_DIR` onceAngel Pons
2021-07-26mb/*: Specify type of `FMDFILE` onceAngel Pons
2021-07-26mb/*: Specify type of `DEVICETREE` onceAngel Pons
2021-07-26mb/*: Specify type of `MAINBOARD_PART_NUMBER` onceAngel Pons
2021-07-26mb/*: Specify type of `MAINBOARD_DIR` onceAngel Pons
2021-07-26src/*: Specify type of `CBFS_SIZE` onceAngel Pons
2021-07-23mb/siemens/mc_ehl1: Add GPIO configurationWerner Zeh
2021-07-23mb/siemens/mc_ehl1: Remove SD-Card card detect GPIO in devicetreeWerner Zeh
2021-07-23mb/siemens/mc_apl{1,2,3,5,6}: Use PCI_ALLOW_BUS_MASTER_ANY_DEVICEWerner Zeh
2021-07-22mb/siemens/mc_ehl1: Disable GSPI in devicetreeWerner Zeh
2021-07-22mb/siemens/mc_ehl1: Adjust I2C bus enablement in devicetreeWerner Zeh
2021-07-22mb/siemens/mc_ehl1: Disable power management features for SATAWerner Zeh
2021-07-22mb/siemens/mc_ehl1: Adjust PCIe settings in devicetreeWerner Zeh
2021-07-22mb/siemens/mc_ehl1: Adjust USB port settings in devicetreeWerner Zeh
2021-07-22mb/siemens/mc_ehl1: Remove display related UPDs from devicetreeWerner Zeh
2021-07-21mb/siemens/mc_apl{1,2,3,5,6}: Set PCI bus master bit only if allowedWerner Zeh
2021-07-20mb/siemens/mc_ehl: Move SPD data to variant directoryWerner Zeh
2021-07-14mb/siemens/chili: Drop ineffective `SaGv` settingAngel Pons
2021-07-13mb/siemens/chili: Use CHIPSET_LOCKDOWN_COREBOOTFelix Singer
2021-07-07mb/siemens/mc_ehl: Switch to 16 MB ROM and provide a flashmapWerner Zeh
2021-07-07mb/siemens/mc_ehl: Clean up KconfigWerner Zeh
2021-07-05mb/siemens/mc_ehl: Provide a proper scheme for variantsWerner Zeh
2021-07-05mb/siemens/mc_ehl: Add new mainboard based on elkhartlake_crbWerner Zeh
2021-06-29Kconfig: Escape variablesPatrick Georgi
2021-06-04mb/siemens/mc_apl2: Disable unused I2C controllersWerner Zeh
2021-06-04mb/siemens/mc_apl{1,2,3,5,6}: Provide I2C timings for 400 kHzWerner Zeh
2021-05-30mb/siemens/mc_apl{1,2,3,5,6}: Disable ACPI-support for RX6110Werner Zeh
2021-05-30mb/siemens/mc_apl1: Move gpio.c from baseboard to mc_apl1Mario Scheithauer
2021-05-30mb/siemens/{mc_apl2,...,mc_apl6}: Do early UART pad configurationMario Scheithauer
2021-05-06src: Retype option API to use unsigned integersAngel Pons
2021-05-02mb/siemens/mc_apl{1,2,3,5,6}: Tune I2C frequencyWerner Zeh
2021-04-22soc/intel/cannonlake: Set DIMM_SPD_SIZE to 512Felix Singer
2021-04-21mainboard: Use read_int_option()Angel Pons
2021-02-16mb/siemens/mc_apl1/variants/mc_apl2/mainboard.c: Clean includesElyes HAOUAS
2021-02-15src/mb: Remove unused <console/console.h>Elyes HAOUAS
2021-02-11src/mainboard: Remove unneeded whitespace before tabElyes HAOUAS
2021-02-10mb/siemens/mc_apl2: Switch I2C bus for RX6110SAMario Scheithauer
2021-02-02mb/siemens/mc_apl1: do UART pad configuration at board-levelMichael Niewöhner
2021-01-27ACPI: Add top-level ASLKyösti Mälkki
2021-01-21mb/siemens/chili: do UART pad configuration at board-levelMichael Niewöhner
2021-01-20mb/siemens/{mc_apl1,...,mc_apl6}: Configure FSP-S UPDsMario Scheithauer
2021-01-15mb/siemens/mc_apl1: do LPC/eSPI pad configuration at board-levelMichael Niewöhner
2021-01-05mb/siemens/chili: Rework KconfigFelix Singer
2020-12-27mb/siemens/chili/base: Add SMBIOS slot descriptionsFelix Singer
2020-12-08mb/siemens/chili/base: Fix state of PCI devicesFelix Singer
2020-12-08mb/siemens/chili: Remove unnecessary device declarationsFelix Singer
2020-12-06mb/siemens/chili: Move mainboard/gpio.h to variant/gpio.hFelix Singer
2020-11-30mb/siemens/chili: Configure GPIOs in gpio.cFelix Singer
2020-11-30mb/siemens/chili: Introduce include folder for header filesFelix Singer
2020-11-30mb/siemens/mc_apl1: Deduplicate wait_for_legacy_dev()Angel Pons
2020-11-30mb/siemens/mc_apl1: Simplify is_mac_adr_valid() logicAngel Pons
2020-11-30drivers/intel/i210: Define MAC_ADDR_LENAngel Pons
2020-11-30mb/siemens/mc_apl1/mainboard.c: Refactor loop bodyAngel Pons
2020-11-23mb/siemens/mc_apl1: Use `pci_or_config16` functionAngel Pons
2020-11-23mb/**/cmos.layout: Indent everything with tabsAngel Pons
2020-11-22mb/*: Use ACPI_DSDT_REV_2 instead of hard-coded valueFelix Singer
2020-11-13soc/intel/cnl: replace the remains of HeciEnabled by device state in dtMichael Niewöhner
2020-10-26mb/*,soc/intel: drop the obsolete dt option `speed_shift_enable`Michael Niewöhner
2020-10-19mb/siemens/chili: Add Chili variantNico Huber
2020-10-19mb/siemens/chili: Add new mainboardThomas Heijligen
2020-10-13{src/mb,util/autoport}: Use macro for DSDT revisionElyes HAOUAS
2020-10-05mb/siemens/mc_apl6: Enable eMMCMario Scheithauer
2020-09-19apollolake boards: Enable CSE in devicetreeSubrata Banik
2020-09-10mb/siemens/mc_apl2/gpio: Fix code styleMaxim Polyakov
2020-09-10mb/siemens/mc_apl2/gpio: Undo set DRIVER for GPOMaxim Polyakov
2020-09-09apollolake: Define MAX_CPUS at SoC scopeAngel Pons
2020-09-09apollolake: Limit MAX_CPUS to 4Angel Pons
2020-07-09mb/siemens/mc_apl1: Use OPCODE menu set up of fast SPI driverWerner Zeh
2020-06-30src: Remove whitespaces before tabsElyes HAOUAS
2020-06-19Kconfig: Escape variable to accommodate new Kconfig versionsPatrick Georgi
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
2020-05-02acpi: Move ACPI table support out of arch/x86 (3/5)Furquan Shaikh
2020-04-04mainboard/siemens: Use SPDX for GPL-2.0-only filesAngel Pons
2020-03-31security/vboot: Decouple measured boot from verified bootBill XIE
2020-03-18mainboard/[^a-p]*: Remove copyright noticesPatrick Georgi
2020-03-03mb/*/Kconfig: Factor out MAINBOARD_VENDORAngel Pons