Age | Commit message (Expand) | Author |
2023-06-15 | mb/siemens/mc_ehl3/devicetree.cb: Disable USB 3.0 port 1 | Jan Samek |
2023-06-02 | soc/intel/apollolake: Switch to snake case for SataPortsEnable | Mario Scheithauer |
2023-06-01 | mb/siemens/{mc_apl2,mc_apl5,mc_apl6}: Use SSD type for SATA ports | Mario Scheithauer |
2023-06-01 | mb/siemens/{mc_apl2,mc_apl5,mc_apl6}: Limit SATA speed to Gen 2 | Mario Scheithauer |
2023-05-24 | mb/siemens/mc_ehl1: Enable pi608gp I2C driver | Jan Samek |
2023-05-24 | mb/siemens/mc_ehl4: Double payload size to 256 bytes for PCIe RP #2, #3 | Mario Scheithauer |
2023-05-12 | mb/siemens/mc_ehl5: Add PTN3460 eDP-to-LVDS bridge | Mario Scheithauer |
2023-05-12 | mb/siemens/mc_ehl5: Add new board variant based on mc_ehl2 | Mario Scheithauer |
2023-05-11 | mb/siemens/mc_apl5: Set Full Reset Bit into Reset Control Register | Mario Scheithauer |
2023-05-11 | mb/siemens/mc_apl: Correct multi-line comment style for all Siemens APL Boards | Mario Scheithauer |
2023-05-11 | mb/siemens/mc_ehl: Remove '_' from mainboard model option in Kconfig.name | Mario Scheithauer |
2023-05-11 | mb/siemens/mc_ehl1: Use SSD type for SATA ports | Mario Scheithauer |
2023-05-04 | mb/siemens/mc_ehl: Remove subdir 'spd' from Makefile | Mario Scheithauer |
2023-05-01 | mb/siemens/mc_ehl: Remove wrong comment regarding spd.bin | Werner Zeh |
2023-04-26 | mb/siemens/mc_ehl4: Enable SD card | Mario Scheithauer |
2023-04-26 | mb/siemens/mc_ehl4: Switch RTC type and connection | Mario Scheithauer |
2023-04-26 | mb/siemens/mc_ehl4: Adjust USB settings | Mario Scheithauer |
2023-04-26 | mb/siemens/mc_ehl4: Change NC FPGA PCIe RP connection for POST codes | Mario Scheithauer |
2023-04-26 | mb/siemens/mc_ehl4: Adjust GPIOs | Mario Scheithauer |
2023-04-11 | mb/siemens/mc_ehl2: Fix GPIO settings for latest HW revision | Mario Scheithauer |
2023-03-23 | soc/intel/elkhartlake: Define DIMM_SPD_SIZE in SoC Kconfig | Michał Żygowski |
2023-03-21 | mb/siemens/mc_ehl4: Limit PCIe root port #4 and #5 speed to Gen 1 | Mario Scheithauer |
2023-03-21 | mb/siemens/mc_ehl4: Enable PCIe devices | Mario Scheithauer |
2023-03-03 | drv/i2c/ptn3460: Add 'mainboard' prefix to mainboard-level callbacks | Jan Samek |
2023-03-02 | mb/siemens/mc_ehl*: Correct comment in gpio.c | Mario Scheithauer |
2023-03-02 | mb/siemens/mc_ehl4: Remove TPM from devicetree and Kconfig | Mario Scheithauer |
2023-03-02 | mb/siemens/mc_ehl: Move TPM Kconfig switches to variants | Mario Scheithauer |
2023-03-02 | mb/siemens/mc_ehl2: Set RGMII output impedance manually | Mario Scheithauer |
2023-03-02 | mb/siemens/mc_ehl4: Add new board variant based on mc_ehl1 | Mario Scheithauer |
2023-03-02 | mb/siemens/mc_ehl2: Fix GPIO settings | Mario Scheithauer |
2023-03-01 | mb/siemens/mc_ehl3/lcd_panel.c: Set LVDS re-power delay to 1 s | Jan Samek |
2023-02-03 | soc/intel/apl: Move cpu cluster to chipset.cb | Arthur Heymans |
2023-02-02 | drv/i2c/ptn3460: Use PTN_EDID_LEN instead of constant | Jan Samek |
2023-01-30 | src/mainboard: Remove unnecessary space after casts | Elyes Haouas |
2023-01-30 | mb/siemens/mc_ehl3/gpio.c: Disable PSE GBE0 GPIO | Jan Samek |
2023-01-30 | mb/*: Remove lapic from devicetree | Arthur Heymans |
2023-01-27 | drivers/i2c/ptn3460: Use cb_err in mb_adjust_cfg | Jan Samek |
2023-01-27 | mb/siemens/mc_apl1/var/mc_apl5: Enable early POST | Jan Samek |
2023-01-22 | mb/siemens/mc_apl1/var/mc_apl6: Enable early POST | Jan Samek |
2023-01-22 | mb/siemens/mc_apl1: Move POST logic to mainboard level | Jan Samek |
2023-01-20 | mb/siemens: Unify and clean lcd_panel.c coding style | Jan Samek |
2023-01-20 | mb/siemens/mc_ehl3: Add PTN3460 eDP-to-LVDS bridge | Jan Samek |
2023-01-19 | mb/siemens/mc_ehl3: Use device/mmio.h instead of device/pci_ops.h | Jan Samek |
2023-01-18 | mb/siemens/mc_ehl: Remove '_' from mc_ehl3 part number | Jan Samek |
2023-01-13 | mainboard: Remove duplicated <soc/gpio.h> | Elyes Haouas |
2023-01-11 | mb/siemens/mc_ehl1: Enable real-time tuning | Werner Zeh |
2023-01-10 | mb/siemens/mc_ehl1: Limit SATA speed to Gen 2 | Werner Zeh |
2022-12-23 | mb/siemens/mc_apl{4,7}: Limit I2C bus speed to 100 kHz on bus 7 | Werner Zeh |
2022-12-21 | mb/siemens/mc_ehl3/devicetree.cb: Remove TSN GbE 0 | Jan Samek |
2022-12-21 | mb/siemens/mc_ehl3/mainboard.c: Remove XIO2001 register tweaks | Jan Samek |
2022-12-17 | mb/siemens/mc_ehl3/devicetree.cb: Adapt PCIe root port settings | Jan Samek |
2022-12-17 | mb/siemens/mc_ehl3: Add board variant based on mc_ehl2 | Jan Samek |
2022-12-10 | treewide: Include <device/mmio.h> instead of <arch/mmio.h> | Elyes Haouas |
2022-12-09 | mb/siemens/*/Makefile.inc: Remove path to non-existent folder | Elyes Haouas |
2022-12-01 | mb/siemens/mc_ehl2: Disable GSPI2 controller | Mario Scheithauer |
2022-11-25 | mb/siemens/mc_ehl2: Disable L1 prefetcher | Mario Scheithauer |
2022-11-24 | mb/siemens/mc_ehl2: Enable downshift for Marvell PHYs | Mario Scheithauer |
2022-11-24 | mb/siemens/mc_ehl2: Enable Marvell PHY interrupt | Mario Scheithauer |
2022-11-24 | mb/siemens/mc_ehl2: Enable Marvell PHY 88E1512 driver | Mario Scheithauer |
2022-11-18 | mb/siemens/mc_ehl2/devicetree.cb: Use RV3028 bus_speed instead of dummy i2c d... | Jan Samek |
2022-11-09 | mb/siemens/mc_ehl2: Provide I2C timing parameter for SSDT | Werner Zeh |
2022-11-09 | mb/siemens/mc_ehl2: Add dummy I2C devices to limit the I2C speed in OS | Werner Zeh |
2022-10-29 | mb/siemens/mc_ehl: Remove spd.bin from CBFS | Werner Zeh |
2022-10-27 | mb/siemens/mc_apl2: Enable early POST through NC_FPGA | Jan Samek |
2022-10-25 | mb/siemens/mc_ehl1: Disable L1 prefetcher | Werner Zeh |
2022-10-22 | mb/siemens/mc_ehl: Add FIVR config to devicetree for all variants | Werner Zeh |
2022-10-22 | mb/siemens/mc_apl*: Enable early PCI bridge before FSP-M | Angel Pons |
2022-10-07 | mb/siemens/mc_ehl2: Use preset driver strength for SD-Card | Mario Scheithauer |
2022-09-22 | mb/siemens/mc_apl7: Enable libgfxinit for the board | Jan Samek |
2022-09-22 | mb/siemens/mc_apl7/Kconfig: Enable PTN3460 early init | Jan Samek |
2022-09-19 | mb/siemens/mc_apl1: Do not wait for legacy devices on mc_apl7 | Werner Zeh |
2022-09-07 | mb/siemens/mc_ehl2: Limit SD-Card speed modes to DDR50 | Werner Zeh |
2022-09-07 | mb/siemens/mc_ehl2: Set I2C bus 1 speed to 100 kHz | Werner Zeh |
2022-09-07 | mb/siemens/mc_ehl2: Change to new RTC RV3028-C7 | Werner Zeh |
2022-09-07 | mb/siemens/mc_ehl: Move RTC Kconfig option to variant level | Werner Zeh |
2022-08-16 | mb/**/dsdt.asl: Drop misleading "OEM revision" comment | Angel Pons |
2022-08-16 | mb/**/dsdt.asl: Drop superfluous comments | Angel Pons |
2022-06-27 | mb/siemens/mc_apl7: Disable VBOOT and TPM | Uwe Poeche |
2022-06-23 | mb/siemens/mc_apl1: Add new mainboard variant mc_apl7 | Uwe Poeche |
2022-06-20 | soc/intel/apollolake: Hook Up SataPortEnable to devicetree | Sean Rhodes |
2022-05-26 | soc/intel/cannonlake: Hook up FSP hyper-threading setting to option API | Felix Singer |
2022-05-23 | mb/siemens/mc_ehl: Disable RAPL | Uwe Poeche |
2022-05-21 | mb/siemens/mc_ehl2: Invert PHY IRQ from falling edge to rising edge | Mario Scheithauer |
2022-05-20 | mb/siemens/mc_ehl2: Quick fix for PSE TSN phy interface type | Lean Sheng Tan |
2022-05-18 | intel/common/block: Provide RAPL and min clock ratio switches in common | Uwe Poeche |
2022-05-17 | mainboard/**/devicetree.cb: Fix typo | Angel Pons |
2022-05-17 | soc/intel/elkhartlake: Enable SMBus depending on dev state | Angel Pons |
2022-05-17 | mb/siemens/mc_ehl2: Disable PCI clock outputs on XIO bridge | Mario Scheithauer |
2022-05-16 | mb/siemens/mc_ehl2: Enable TSN GbE driver | Mario Scheithauer |
2022-05-16 | mb/siemens/mc_ehl2: Set PCH TSN link speed to 1 Gbps in devicetree | Mario Scheithauer |
2022-05-16 | mb/siemens/mc_ehl2: Adjust PSE TSN settings in devicetree | Mario Scheithauer |
2022-04-21 | tpm: Refactor TPM Kconfig dimensions | Jes B. Klinke |
2022-03-14 | mb/siemens/mc_ehl: Increase SPD buffer size to 512 bytes | Werner Zeh |
2022-03-07 | src: Make PCI ID define names shorter | Felix Singer |
2022-03-02 | mb/siemens/mc_ehl: Disable HS400 mode for eMMC | Werner Zeh |
2022-02-22 | mb/siemens/mc_apl2: Enable PCI device for I2C bus 0 | Werner Zeh |
2022-02-12 | mb/siemens/mc_apl{2,4,5,6}: Enable recovery MRC cache | Werner Zeh |
2022-02-03 | mb/siemens/mc_ehl2: Disable PCIe RPs | Mario Scheithauer |
2022-02-03 | mb/siemens/mc_ehl2: Disable SATA | Mario Scheithauer |
2022-02-01 | mb/siemens/{mc_apl1,...,mc_apl6}: Disable SATA ALPM support | Mario Scheithauer |