Age | Commit message (Expand) | Author |
2021-10-11 | mb/siemens/mc_ehl2: Enable LPC ComB | Mario Scheithauer |
2021-10-11 | mb/siemens/mc_ehl2: Disable INTEL_LPSS_UART_FOR_CONSOLE | Mario Scheithauer |
2021-10-11 | mb/siemens/mc_ehl2: Adjust GPIOs | Mario Scheithauer |
2021-10-11 | mb/siemens/mc_ehl2: Disable SATA Port 0 | Mario Scheithauer |
2021-10-11 | mb/siemens/mc_ehl2: Enable SD-Card | Mario Scheithauer |
2021-10-11 | mb/siemens/mc_ehl2: Move RTC RX6110SA from SMBus to I2C2 | Mario Scheithauer |
2021-10-11 | mb/siemens/mc_ehl2: Update SPD for DDR4 devices | Mario Scheithauer |
2021-10-01 | mb/siemens/mc_ehl: Move UART_FOR_CONSOLE switch to variant level | Werner Zeh |
2021-10-01 | mb/siemens/mc_ehl: Add a new variant mc_ehl2 | Werner Zeh |
2021-10-01 | mb/siemens/mc_ehl1: Enable LPSS UART | Werner Zeh |
2021-09-03 | src/*: Specify type of `DIMM_SPD_SIZE` once | Angel Pons |
2021-08-28 | soc/intel/common: Use CHIPSET_LOCKDOWN_COREBOOT by default | Felix Singer |
2021-08-13 | mb/{kontron/bsl6,siemens/chili}: Add `inhibit_flashlock` nvram option | Nico Huber |
2021-08-02 | mb/siemens/mc_ehl: Enable master bit in PCI config space if allowed | Werner Zeh |
2021-08-02 | mb/siemens/mc_ehl: Add code to wait for legacy devices before PCI scan | Werner Zeh |
2021-07-29 | mb/siemens/mc_ehl1: Disable LTR for all PCIe root ports | Werner Zeh |
2021-07-29 | mb/siemens/mc_ehl1: Disable L1 substates for PCIe root ports | Werner Zeh |
2021-07-29 | mb/siemens/mc_ehl1: Enable Intel I210 MACPHY driver | Werner Zeh |
2021-07-29 | mb/siemens/mc_ehl: Enable Siemens NC-FPGA driver | Werner Zeh |
2021-07-29 | mb/siemens/mc_ehl: Enable SIEMENS_HWILIB | Werner Zeh |
2021-07-29 | mb/siemens/mc_ehl1: Enable In Band ECC | Werner Zeh |
2021-07-29 | mb/siemens/mc_ehl1: Disable System Agent dynamic frequency support | Werner Zeh |
2021-07-29 | mb/siemens/mc_ehl: Enable measured boot | Werner Zeh |
2021-07-29 | mb/siemens/mc_ehl: Enable LPC TPM | Werner Zeh |
2021-07-29 | mb/siemens/mc_ehl: Add external RTC RX6110SA | Werner Zeh |
2021-07-26 | mb/*: Specify type of `VARIANT_DIR` once | Angel Pons |
2021-07-26 | mb/*: Specify type of `FMDFILE` once | Angel Pons |
2021-07-26 | mb/*: Specify type of `DEVICETREE` once | Angel Pons |
2021-07-26 | mb/*: Specify type of `MAINBOARD_PART_NUMBER` once | Angel Pons |
2021-07-26 | mb/*: Specify type of `MAINBOARD_DIR` once | Angel Pons |
2021-07-26 | src/*: Specify type of `CBFS_SIZE` once | Angel Pons |
2021-07-23 | mb/siemens/mc_ehl1: Add GPIO configuration | Werner Zeh |
2021-07-23 | mb/siemens/mc_ehl1: Remove SD-Card card detect GPIO in devicetree | Werner Zeh |
2021-07-23 | mb/siemens/mc_apl{1,2,3,5,6}: Use PCI_ALLOW_BUS_MASTER_ANY_DEVICE | Werner Zeh |
2021-07-22 | mb/siemens/mc_ehl1: Disable GSPI in devicetree | Werner Zeh |
2021-07-22 | mb/siemens/mc_ehl1: Adjust I2C bus enablement in devicetree | Werner Zeh |
2021-07-22 | mb/siemens/mc_ehl1: Disable power management features for SATA | Werner Zeh |
2021-07-22 | mb/siemens/mc_ehl1: Adjust PCIe settings in devicetree | Werner Zeh |
2021-07-22 | mb/siemens/mc_ehl1: Adjust USB port settings in devicetree | Werner Zeh |
2021-07-22 | mb/siemens/mc_ehl1: Remove display related UPDs from devicetree | Werner Zeh |
2021-07-21 | mb/siemens/mc_apl{1,2,3,5,6}: Set PCI bus master bit only if allowed | Werner Zeh |
2021-07-20 | mb/siemens/mc_ehl: Move SPD data to variant directory | Werner Zeh |
2021-07-14 | mb/siemens/chili: Drop ineffective `SaGv` setting | Angel Pons |
2021-07-13 | mb/siemens/chili: Use CHIPSET_LOCKDOWN_COREBOOT | Felix Singer |
2021-07-07 | mb/siemens/mc_ehl: Switch to 16 MB ROM and provide a flashmap | Werner Zeh |
2021-07-07 | mb/siemens/mc_ehl: Clean up Kconfig | Werner Zeh |
2021-07-05 | mb/siemens/mc_ehl: Provide a proper scheme for variants | Werner Zeh |
2021-07-05 | mb/siemens/mc_ehl: Add new mainboard based on elkhartlake_crb | Werner Zeh |
2021-06-29 | Kconfig: Escape variables | Patrick Georgi |
2021-06-04 | mb/siemens/mc_apl2: Disable unused I2C controllers | Werner Zeh |
2021-06-04 | mb/siemens/mc_apl{1,2,3,5,6}: Provide I2C timings for 400 kHz | Werner Zeh |
2021-05-30 | mb/siemens/mc_apl{1,2,3,5,6}: Disable ACPI-support for RX6110 | Werner Zeh |
2021-05-30 | mb/siemens/mc_apl1: Move gpio.c from baseboard to mc_apl1 | Mario Scheithauer |
2021-05-30 | mb/siemens/{mc_apl2,...,mc_apl6}: Do early UART pad configuration | Mario Scheithauer |
2021-05-06 | src: Retype option API to use unsigned integers | Angel Pons |
2021-05-02 | mb/siemens/mc_apl{1,2,3,5,6}: Tune I2C frequency | Werner Zeh |
2021-04-22 | soc/intel/cannonlake: Set DIMM_SPD_SIZE to 512 | Felix Singer |
2021-04-21 | mainboard: Use read_int_option() | Angel Pons |
2021-02-16 | mb/siemens/mc_apl1/variants/mc_apl2/mainboard.c: Clean includes | Elyes HAOUAS |
2021-02-15 | src/mb: Remove unused <console/console.h> | Elyes HAOUAS |
2021-02-11 | src/mainboard: Remove unneeded whitespace before tab | Elyes HAOUAS |
2021-02-10 | mb/siemens/mc_apl2: Switch I2C bus for RX6110SA | Mario Scheithauer |
2021-02-02 | mb/siemens/mc_apl1: do UART pad configuration at board-level | Michael Niewöhner |
2021-01-27 | ACPI: Add top-level ASL | Kyösti Mälkki |
2021-01-21 | mb/siemens/chili: do UART pad configuration at board-level | Michael Niewöhner |
2021-01-20 | mb/siemens/{mc_apl1,...,mc_apl6}: Configure FSP-S UPDs | Mario Scheithauer |
2021-01-15 | mb/siemens/mc_apl1: do LPC/eSPI pad configuration at board-level | Michael Niewöhner |
2021-01-05 | mb/siemens/chili: Rework Kconfig | Felix Singer |
2020-12-27 | mb/siemens/chili/base: Add SMBIOS slot descriptions | Felix Singer |
2020-12-08 | mb/siemens/chili/base: Fix state of PCI devices | Felix Singer |
2020-12-08 | mb/siemens/chili: Remove unnecessary device declarations | Felix Singer |
2020-12-06 | mb/siemens/chili: Move mainboard/gpio.h to variant/gpio.h | Felix Singer |
2020-11-30 | mb/siemens/chili: Configure GPIOs in gpio.c | Felix Singer |
2020-11-30 | mb/siemens/chili: Introduce include folder for header files | Felix Singer |
2020-11-30 | mb/siemens/mc_apl1: Deduplicate wait_for_legacy_dev() | Angel Pons |
2020-11-30 | mb/siemens/mc_apl1: Simplify is_mac_adr_valid() logic | Angel Pons |
2020-11-30 | drivers/intel/i210: Define MAC_ADDR_LEN | Angel Pons |
2020-11-30 | mb/siemens/mc_apl1/mainboard.c: Refactor loop body | Angel Pons |
2020-11-23 | mb/siemens/mc_apl1: Use `pci_or_config16` function | Angel Pons |
2020-11-23 | mb/**/cmos.layout: Indent everything with tabs | Angel Pons |
2020-11-22 | mb/*: Use ACPI_DSDT_REV_2 instead of hard-coded value | Felix Singer |
2020-11-13 | soc/intel/cnl: replace the remains of HeciEnabled by device state in dt | Michael Niewöhner |
2020-10-26 | mb/*,soc/intel: drop the obsolete dt option `speed_shift_enable` | Michael Niewöhner |
2020-10-19 | mb/siemens/chili: Add Chili variant | Nico Huber |
2020-10-19 | mb/siemens/chili: Add new mainboard | Thomas Heijligen |
2020-10-13 | {src/mb,util/autoport}: Use macro for DSDT revision | Elyes HAOUAS |
2020-10-05 | mb/siemens/mc_apl6: Enable eMMC | Mario Scheithauer |
2020-09-19 | apollolake boards: Enable CSE in devicetree | Subrata Banik |
2020-09-10 | mb/siemens/mc_apl2/gpio: Fix code style | Maxim Polyakov |
2020-09-10 | mb/siemens/mc_apl2/gpio: Undo set DRIVER for GPO | Maxim Polyakov |
2020-09-09 | apollolake: Define MAX_CPUS at SoC scope | Angel Pons |
2020-09-09 | apollolake: Limit MAX_CPUS to 4 | Angel Pons |
2020-07-09 | mb/siemens/mc_apl1: Use OPCODE menu set up of fast SPI driver | Werner Zeh |
2020-06-30 | src: Remove whitespaces before tabs | Elyes HAOUAS |
2020-06-19 | Kconfig: Escape variable to accommodate new Kconfig versions | Patrick Georgi |
2020-05-11 | treewide: Remove "this file is part of" lines | Patrick Georgi |
2020-05-02 | acpi: Move ACPI table support out of arch/x86 (3/5) | Furquan Shaikh |
2020-04-04 | mainboard/siemens: Use SPDX for GPL-2.0-only files | Angel Pons |
2020-03-31 | security/vboot: Decouple measured boot from verified boot | Bill XIE |
2020-03-18 | mainboard/[^a-p]*: Remove copyright notices | Patrick Georgi |