summaryrefslogtreecommitdiff
path: root/src/mainboard/siemens
AgeCommit message (Expand)Author
2023-03-01mb/siemens/mc_ehl3/lcd_panel.c: Set LVDS re-power delay to 1 sJan Samek
2023-02-03soc/intel/apl: Move cpu cluster to chipset.cbArthur Heymans
2023-02-02drv/i2c/ptn3460: Use PTN_EDID_LEN instead of constantJan Samek
2023-01-30src/mainboard: Remove unnecessary space after castsElyes Haouas
2023-01-30mb/siemens/mc_ehl3/gpio.c: Disable PSE GBE0 GPIOJan Samek
2023-01-30mb/*: Remove lapic from devicetreeArthur Heymans
2023-01-27drivers/i2c/ptn3460: Use cb_err in mb_adjust_cfgJan Samek
2023-01-27mb/siemens/mc_apl1/var/mc_apl5: Enable early POSTJan Samek
2023-01-22mb/siemens/mc_apl1/var/mc_apl6: Enable early POSTJan Samek
2023-01-22mb/siemens/mc_apl1: Move POST logic to mainboard levelJan Samek
2023-01-20mb/siemens: Unify and clean lcd_panel.c coding styleJan Samek
2023-01-20mb/siemens/mc_ehl3: Add PTN3460 eDP-to-LVDS bridgeJan Samek
2023-01-19mb/siemens/mc_ehl3: Use device/mmio.h instead of device/pci_ops.hJan Samek
2023-01-18mb/siemens/mc_ehl: Remove '_' from mc_ehl3 part numberJan Samek
2023-01-13mainboard: Remove duplicated <soc/gpio.h>Elyes Haouas
2023-01-11mb/siemens/mc_ehl1: Enable real-time tuningWerner Zeh
2023-01-10mb/siemens/mc_ehl1: Limit SATA speed to Gen 2Werner Zeh
2022-12-23mb/siemens/mc_apl{4,7}: Limit I2C bus speed to 100 kHz on bus 7Werner Zeh
2022-12-21mb/siemens/mc_ehl3/devicetree.cb: Remove TSN GbE 0Jan Samek
2022-12-21mb/siemens/mc_ehl3/mainboard.c: Remove XIO2001 register tweaksJan Samek
2022-12-17mb/siemens/mc_ehl3/devicetree.cb: Adapt PCIe root port settingsJan Samek
2022-12-17mb/siemens/mc_ehl3: Add board variant based on mc_ehl2Jan Samek
2022-12-10treewide: Include <device/mmio.h> instead of <arch/mmio.h>Elyes Haouas
2022-12-09mb/siemens/*/Makefile.inc: Remove path to non-existent folderElyes Haouas
2022-12-01mb/siemens/mc_ehl2: Disable GSPI2 controllerMario Scheithauer
2022-11-25mb/siemens/mc_ehl2: Disable L1 prefetcherMario Scheithauer
2022-11-24mb/siemens/mc_ehl2: Enable downshift for Marvell PHYsMario Scheithauer
2022-11-24mb/siemens/mc_ehl2: Enable Marvell PHY interruptMario Scheithauer
2022-11-24mb/siemens/mc_ehl2: Enable Marvell PHY 88E1512 driverMario Scheithauer
2022-11-18mb/siemens/mc_ehl2/devicetree.cb: Use RV3028 bus_speed instead of dummy i2c d...Jan Samek
2022-11-09mb/siemens/mc_ehl2: Provide I2C timing parameter for SSDTWerner Zeh
2022-11-09mb/siemens/mc_ehl2: Add dummy I2C devices to limit the I2C speed in OSWerner Zeh
2022-10-29mb/siemens/mc_ehl: Remove spd.bin from CBFSWerner Zeh
2022-10-27mb/siemens/mc_apl2: Enable early POST through NC_FPGAJan Samek
2022-10-25mb/siemens/mc_ehl1: Disable L1 prefetcherWerner Zeh
2022-10-22mb/siemens/mc_ehl: Add FIVR config to devicetree for all variantsWerner Zeh
2022-10-22mb/siemens/mc_apl*: Enable early PCI bridge before FSP-MAngel Pons
2022-10-07mb/siemens/mc_ehl2: Use preset driver strength for SD-CardMario Scheithauer
2022-09-22mb/siemens/mc_apl7: Enable libgfxinit for the boardJan Samek
2022-09-22mb/siemens/mc_apl7/Kconfig: Enable PTN3460 early initJan Samek
2022-09-19mb/siemens/mc_apl1: Do not wait for legacy devices on mc_apl7Werner Zeh
2022-09-07mb/siemens/mc_ehl2: Limit SD-Card speed modes to DDR50Werner Zeh
2022-09-07mb/siemens/mc_ehl2: Set I2C bus 1 speed to 100 kHzWerner Zeh
2022-09-07mb/siemens/mc_ehl2: Change to new RTC RV3028-C7Werner Zeh
2022-09-07mb/siemens/mc_ehl: Move RTC Kconfig option to variant levelWerner Zeh
2022-08-16mb/**/dsdt.asl: Drop misleading "OEM revision" commentAngel Pons
2022-08-16mb/**/dsdt.asl: Drop superfluous commentsAngel Pons
2022-06-27mb/siemens/mc_apl7: Disable VBOOT and TPMUwe Poeche
2022-06-23mb/siemens/mc_apl1: Add new mainboard variant mc_apl7Uwe Poeche
2022-06-20soc/intel/apollolake: Hook Up SataPortEnable to devicetreeSean Rhodes
2022-05-26soc/intel/cannonlake: Hook up FSP hyper-threading setting to option APIFelix Singer
2022-05-23mb/siemens/mc_ehl: Disable RAPLUwe Poeche
2022-05-21mb/siemens/mc_ehl2: Invert PHY IRQ from falling edge to rising edgeMario Scheithauer
2022-05-20mb/siemens/mc_ehl2: Quick fix for PSE TSN phy interface typeLean Sheng Tan
2022-05-18intel/common/block: Provide RAPL and min clock ratio switches in commonUwe Poeche
2022-05-17mainboard/**/devicetree.cb: Fix typoAngel Pons
2022-05-17soc/intel/elkhartlake: Enable SMBus depending on dev stateAngel Pons
2022-05-17mb/siemens/mc_ehl2: Disable PCI clock outputs on XIO bridgeMario Scheithauer
2022-05-16mb/siemens/mc_ehl2: Enable TSN GbE driverMario Scheithauer
2022-05-16mb/siemens/mc_ehl2: Set PCH TSN link speed to 1 Gbps in devicetreeMario Scheithauer
2022-05-16mb/siemens/mc_ehl2: Adjust PSE TSN settings in devicetreeMario Scheithauer
2022-04-21tpm: Refactor TPM Kconfig dimensionsJes B. Klinke
2022-03-14mb/siemens/mc_ehl: Increase SPD buffer size to 512 bytesWerner Zeh
2022-03-07src: Make PCI ID define names shorterFelix Singer
2022-03-02mb/siemens/mc_ehl: Disable HS400 mode for eMMCWerner Zeh
2022-02-22mb/siemens/mc_apl2: Enable PCI device for I2C bus 0Werner Zeh
2022-02-12mb/siemens/mc_apl{2,4,5,6}: Enable recovery MRC cacheWerner Zeh
2022-02-03mb/siemens/mc_ehl2: Disable PCIe RPsMario Scheithauer
2022-02-03mb/siemens/mc_ehl2: Disable SATAMario Scheithauer
2022-02-01mb/siemens/{mc_apl1,...,mc_apl6}: Disable SATA ALPM supportMario Scheithauer
2022-01-25mb/siemens/mc_ehl: Prevent reset when TCO expiresWerner Zeh
2022-01-21soc/intel/ehl: Replace dt `HeciEnabled` by `HECI1 disable` configSubrata Banik
2022-01-10src/mainboard/{siemens,starlabs}: Remove unused <console/console.h>Elyes HAOUAS
2021-12-23mb: Add space before closing comment block keywordPaul Menzel
2021-12-18mb/siemens/chili: Reuse options from Kconfig.nameFelix Singer
2021-12-10mb/siemens/mc_ehl: Enable TPM in bootblockWerner Zeh
2021-11-17mb/siemens/mc_ehl1: Send POST codes to NC FPGA via PCIWerner Zeh
2021-11-15mb/siemens/mc_ehl2: Adjust PCIe clock source settings in devicetreeMario Scheithauer
2021-11-15mb/siemens/mc_ehl: Disable HECI #2 deviceMario Scheithauer
2021-11-04treewide: Replace bad uses of `find_resource`Angel Pons
2021-11-04mb/siemens/mc_ehl: Disable PMC low power modesWerner Zeh
2021-11-04mb/siemens/mc_ehl: Disable all P-StatesWerner Zeh
2021-11-04mb/siemens/mc_ehl: Disable C-States for CPU and packageWerner Zeh
2021-11-04mb/siemens/mc_ehl2: Clean up devicetreeMario Scheithauer
2021-11-04mb/siemens/mc_ehl: Enable Row-Hammer preventionMario Scheithauer
2021-11-04mb/siemens/mc_ehl2: Configure SD card detect pin in devicetreeMario Scheithauer
2021-11-04mb/siemens/mc_ehl2: Clean up PCIe root port settings in devicetreeMario Scheithauer
2021-11-04mb/siemens/mc_ehl2: Adjust PCIe clock settings in devicetreeMario Scheithauer
2021-11-03mb/siemens/mc_ehl1: Adjust PCIe clock settings in devicetreeWerner Zeh
2021-11-02mb/siemens/mc_ehl1: Clean up PCIe root port settings in devicetreeWerner Zeh
2021-11-02mb/siemens/mc_ehl1: Clean up devicetreeWerner Zeh
2021-10-27mb/siemens/chili: Drop redundant Kconfig selectAngel Pons
2021-10-14mb/siemens/mc_ehl2: Adjust PCH serial IO settingsMario Scheithauer
2021-10-14mb/siemens/mc_ehl2: Adjust USB settingsMario Scheithauer
2021-10-14mb/siemens/mc_ehl2: Enable PCI devicesMario Scheithauer
2021-10-14mb/siemens/mc_ehl2: Set coreboot ready LEDMario Scheithauer
2021-10-12mb/siemens/mc_ehl: Remove unneeded 'half_populated' variableWerner Zeh
2021-10-12mb/siemens/mc_ehl: Use SPD data from HW-Info in the first placeWerner Zeh
2021-10-11mb/siemens/mc_ehl2: Adjust Legacy IRQ routing for PCI devicesMario Scheithauer
2021-10-11mb/siemens/mc_ehl: Add variant_mainboard_final()Mario Scheithauer