summaryrefslogtreecommitdiff
path: root/src/mainboard/siemens
AgeCommit message (Collapse)Author
2024-05-30mb/siemens/mc_ehl5: Remove DDI settings from devicetreeMario Scheithauer
Since this mainboard no longer uses the FSP GOP driver, the DDI port settings are no longer necessary. The GOP driver was used in the initial phase of development where we used Tianocore as payload for some test cases. Finally, this mainboard uses a self-made Linux payload, which does the graphic initialization. BUG=none TEST=Boot into Linux and check if graphic works correctly Change-Id: Ie9e135fbc2627546d6ef95d7d5ff3e9a9222b5d2 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82663 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-04-11tree: Remove blank lines before '}' and after '{'Elyes Haouas
Change-Id: I46a362270f69d0a4a28e5bb9c954f34d632815ff Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81455 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2024-02-29include/device/azalia_device.h: Merge location1 and location2Nicholas Sudsgaard
This changes the location to be expressed as a combination of ORs. This allows aliases for special locations. For example, `AZALIA_REAR_PANEL` is easier to read than `AZALIA_EXTERNAL_PRIMARY_CHASSIS, AZALIA_SPECIAL7`. References: - Intel High Definition Audio Specification, rev. 1.0a, page 180, Table 110. Location. Change-Id: I5a61a37ed70027700f07f1532c500f04d7a16ce1 Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80740 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-02-29include/device: Merge enums from azalia_device.h and azalia.hNicholas Sudsgaard
We were keeping 2 copies of the same thing (albeit there were some slight differences). As azalia_device.h is used much more in the codebase this was kept as the base and then some of the nice features of azalia.h were incorporated. The significant changes are: - All enum names now use the `AZALIA_` prefix. This also drops the AzaliaPinConfiguration enum as it was never used since added in 2013. Change-Id: Ie874b083a18963679981a9cd2b25d123890d628e Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80695 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2024-02-18mb/samsung to mb/up: Add SPDX license headers to Kconfig filesMartin Roth
Change-Id: Ied455ff29b151fb5f4bca26a189b1d4104d8cede Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80595 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-01-31device/device.h: Rename busses for clarityArthur Heymans
This renames bus to upstream and link_list to downstream. Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: I80a81b6b8606e450ff180add9439481ec28c2420 Reviewed-on: https://review.coreboot.org/c/coreboot/+/78330 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2024-01-27mb/siemens/mc_ehl3: Use PSE GbE 0 instead of PSE GbE 1Jan Samek
As a result of hardware changes on this board, the PHY previously routed to the PSE GbE 1 is now routed to PSE GbE 0 on the Elkhart Lake SoC. This patch changes the device PCI ID in the board's devicetree and accordingly, the GPIO configuration. BUG=none TEST=Boot into Linux and observe whether both PSE GbE 0 and PCH GbE are working, while PSE GbE 1 remains inactive (not listed by 'ip link') . Change-Id: I322371f944d15134e6f48ecd84a4026c2fced27b Signed-off-by: Jan Samek <jan.samek@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80186 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2024-01-27mb/siemens/mc_ehl5: Set LVDS re-power delay to 1 sMario Scheithauer
The currently used panel type could work with 500 ms but increasing the value to 1 second allows to use a wider range of LVDS LCD panels, as many of them specify the delay of 1 s as minimum. The patch has already been made for mc_ehl3 and serves the purpose of standardization. commit c0221aa980d3 ("mb/siemens/mc_ehl3/lcd_panel.c: Set LVDS re-power delay to 1 s") Change-Id: Ife26ff27b41298ceeed7d9aed0c1ae5553ab5ff8 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80214 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jan Samek <jan.samek@siemens.com>
2024-01-26src, util: Clean up makefile.inc in text, help & commentsMartin Roth
Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: Ib69236fb5d68272f92405512dc231fa75ecccaa6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/80125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2024-01-24mb/lenovo to mb/squared: Rename Makefiles from .inc to .mkMartin Roth
The .inc suffix is confusing to various tools as it's not specific to Makefiles. This means that editors don't recognize the files, and don't open them with highlighting and any other specific editor functionality. This issue is also seen in the release notes generation script where Makefiles get renamed before running cloc. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I4790adb41cb62c8c8dd44261a2926dfb6350955a Reviewed-on: https://review.coreboot.org/c/coreboot/+/80111 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com> Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
2024-01-19mb/siemens/chili: Use chipset dt reference namesFelix Singer
Use the references from the chipset devicetree as this makes the comments superfluous. Change-Id: Ic3a4c85ec6bfdc858f9b6f79b114cf612ad3a153 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80022 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2024-01-17soc/intel/elkhartlake: Drop redundant PcieRpEnableNico Huber
The PcieRpEnable option is redundant to our on/off setting in the devicetrees. Let's use the common coreboot infracture instead. Thanks to Nicholas for doing all the mainboard legwork! Change-Id: I11c3c45eae0e1451d5c54c17b7e60300dedda8fa Signed-off-by: Nico Huber <nico.h@gmx.de> Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jan Samek <jan.samek@siemens.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-11-30mb/siemens/mc_ehl: Enable write access for SPD EEPROM on mc_ehl1Werner Zeh
The address space of possible SPD-EEPROMs 0x50..0x53 on the SMBus interface is per default write-protected in FSP. This avoids that an SPD-EEPROM on a DRAM module gets overwritten by the host. On mc_ehl1, memory-down configuration is used and there is no SPD EEPROM available. Nevertheless, there is a general purpose EEPROM on the same address available which needs to stay writeable. This patch disables the default-enabled write protect feature for the SPD-EEPROM addresses just for mc_ehl1. Test=Boot into Linux and make sure a write access into the EEPROM is possible. Change-Id: I6b0fcdbeb0dbf971cfdceb70d6f4845765a3bdb6 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79334 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jan Samek <jan.samek@siemens.com>
2023-11-10mb/siemens/{mc_ehl3,mc_ehl5}: Fix GPIO settings for latest HW revisionMario Scheithauer
With the latest hardware revision of both mainboards, native function two of GPIO B23 (PCHHOT_N) is used for diagnostic purposes. BUG=none TEST=Checked output verbose GPIO debug messages Change-Id: Ibe130b5d4c74576294183221765c5f4db9b5ec2a Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78962 Reviewed-by: Jan Samek <jan.samek@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-10-03mb/siemens: Move selects from Kconfig.name to KconfigFelix Singer
Selects should be done in the Kconfig file instead of Kconfig.name and not mixed over both files. Change-Id: Ic199a60013ceedfd15b191a5fe707be6654ad3a2 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75078 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2023-09-14mb/siemens/mc_ehl3: Enable PWM passthrough mode on PTN3460Mario Scheithauer
The connected panel on this mainboard gets the PWM frequency directly from the Elkhart Lake CPU. The PWM controls the brightness of the backlight. Therefore, it is necessary to activate the PWM passthrough mode in the PTN3460 eDP-to-LVDS bridge (see PTN3460 Programming Guide - 5. Configuration Registers). Link to PTN3460 Programming Guide: https://web.archive.org/web/20230908074244/https://www.nxp.com/docs/en/application-note/AN11128.pdf BUG=none TEST=Boot into Linux and change the brightness of the screen Change-Id: Ia0a329426e585b6243c8888806befbe4f6ec2998 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77856 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jan Samek <jan.samek@siemens.com>
2023-09-13mb/siemens/mc_ehl5: Enable PWM passthrough mode on PTN3460Mario Scheithauer
The connected panel on this mainboard gets the PWM frequency directly from the Elkhart Lake CPU. The PWM controls the brightness of the backlight. Therefore, it is necessary to activate the PWM passthrough mode in the PTN3460 eDP-to-LVDS bridge (see PTN3460 Programming Guide - 5. Configuration Registers). Link to PTN3460 Programming Guide: https://web.archive.org/web/20230908074244/https://www.nxp.com/docs/en/application-note/AN11128.pdf BUG=none TEST=Boot into Linux and change the brightness of the screen Change-Id: Iec9d8ae22fced40c45e5bfa8989ad655a722d7ef Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77702 Reviewed-by: Jan Samek <jan.samek@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-05mb/siemens/fa_ehl: Process LPDDR4 SPD files and add MT53E512M32D1NP SPDJohannes Hahn
The board uses soldered down LPDDR4, so process their SPD files, and add the SPD for Micron MT53E512M32D1NP-046WTB provided by Micron. Signed-off-by: Johannes Hahn <johannes-hahn@siemens.com> Change-Id: I978b7450b106b86eef322df8b33df41e038599eb Reviewed-on: https://review.coreboot.org/c/coreboot/+/77349 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jan Samek <jan.samek@siemens.com>
2023-09-02mb/siemens/mc_apl2: Set Full Reset Bit into Reset Control RegisterMario Scheithauer
With the introduction of a new Linux version a problem has appeared after a software initiated reset via CF9h register. The problem manifests itself in the fact that the Linux kernel does not start after the reboot. The problem is solved by setting bit 3 to 1 in Reset Control Register (I/O port CF9h). This leads to the fact that the PCH will drive SLP_S3 active low in the reset sequence. It leads to the same behavior as in commit 04ea73ee78bc ("siemens/mc_apl3: Set Full Reset Bit into Reset Control Register") explained. Change-Id: Ibc6d538c939e38732f42995d5ec6c8b61f979a6a Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77603 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Jan Samek <jan.samek@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-24mb/siemens/fa_ehl: Remove RTC RV3028C7Johannes Hahn
Delete this RTC from the configuration as fa_ehl mainboard uses a different real time clock. Signed-off-by: Johannes Hahn <johannes-hahn@siemens.com> Change-Id: Ifd6b68d05a094cb4c890f1ffce62d89b771e23c3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77352 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jan Samek <jan.samek@siemens.com> Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com>
2023-08-24mb/siemens/fa_ehl: Remove TPMJohannes Hahn
The mainboard currently does not make use of a dedicated TPM. Although it has one assembled. This TPM is not connected via LPC hence it is turned off in the devicetree. Signed-off-by: Johannes Hahn <johannes-hahn@siemens.com> Change-Id: I96cc38c3812d76d654339ad5b2b7f88fd1327779 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77351 Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jan Samek <jan.samek@siemens.com>
2023-08-24mb/siemens/fa_ehl: Remove NC_FPGAJohannes Hahn
fa_ehl mainboard does not make use of the SIEMENS NC_FPGA as it is not placed on this board. Signed-off-by: Johannes Hahn <johannes-hahn@siemens.com> Change-Id: I5f1f796e4339ba37d461d6818c2bb6ba028b89c2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77350 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com> Reviewed-by: Jan Samek <jan.samek@siemens.com>
2023-08-24mainboard/siemens/fa_ehl: Add new mainboard based on mc_ehl2Johannes Hahn
Add a new mainboard called fa_ehl which is based on Siemens's 'mc_ehl2'. This commit simply copies the mainboard directory and adjusts the naming to match the new board's name. Moreover a variants scheme is provided for possible alternative implementations. Follow-up commits will introduce the needed changes for the new mainboard. Change-Id: Ia389c8812d14db8b663547e6336e900becbc8be6 Signed-off-by: Johannes Hahn <johannes-hahn@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76444 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Jan Samek <jan.samek@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com>
2023-08-06mainboard: Add SPDX license headers to MakefilesMartin Roth
To help identify the licenses of the various files contained in the coreboot source, we've added SPDX headers to the top of all of the .c and .h files. This extends that practice to Makefiles. Any file in the coreboot project without a specific license is bound to the license of the overall coreboot project, GPL Version 2. This patch adds the GPL V2 license identifier to the top of all makefiles in the mainboard directory that don't already have an SPDX license line at the top. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: Ic451e68b1ad9ccdf34484dd98bd7fca7e177ef22 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68982 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2023-07-13mb/siemens/mc_ehl4: Change GPIO GPP_B5 polarity for DRAM populationMario Scheithauer
With the latest hardware revision, the polarity of GPP_B5 has been changed. For a full-populated DRAM configuration, the input signal is now connected to 3.3 V and for a half-populated configuration it is connected to ground. BUG=none TEST=Use different populated mainboards and check coreboot log GPP_B5 = 0: [INFO ] meminit_channels: DRAM half-populated [DEBUG] 1 DIMMs found GPP_B5 = 1: [DEBUG] 2 DIMMs found Change-Id: Iaa3a63fa52c802d8f5d8c6cc11dd6edfac117e88 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76434 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Jan Samek <jan.samek@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-06mb/siemens/mc_ehl4: Make DRAM population depending on GPIO GPP_B5Mario Scheithauer
GPIO GPP_B5 is used as input on this mainboard. For a full-populated DRAM configuration, the input signal is connected to ground and for a half-populated configuration it is connected to 3.3 V. BUG=none TEST=Use different HW configurations and check coreboot log GPP_B5 = 0: [DEBUG] 2 DIMMs found GPP_B5 = 1: [INFO ] meminit_channels: DRAM half-populated [DEBUG] 1 DIMMs found Change-Id: I48b4a3bea7f1ff804b78b7c648a7ea1925627b8a Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76245 Reviewed-by: Jan Samek <jan.samek@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-07-06mb/siemens/mc_ehl: Make DRAM population configurableMario Scheithauer
There can be mainboard variants, which are only equipped with half-populated DRAM. For this reason, the meminit parameter for populatation should be adjustable. The default setting remains at full-populated DRAM. At mainboard variant level a different selection via individual input paths can be made. Change-Id: I390bbfa680b5505bb2230fa0740720bd9dd1fafb Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76244 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Jan Samek <jan.samek@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-03mb/siemens/mc_ehl3/devicetree.cb: Disable USB 3.0 port 0Jan Samek
It's been decided not to use any of the USB 3.0 ports on this board. This patch disables the remaining USB 3.0 port 0, after the port 1 has already been disabled in commit d0627c7595fe ("mb/siemens/mc_ehl3/devicetree.cb: Disable USB 3.0 port 1"). BUG=none TEST=None of the USB 3.0 ports functional anymore after boot, the USB 2.0 ports continue working. Change-Id: I28465f1c5e6d3167c649da898ec60d8bb97093e2 Signed-off-by: Jan Samek <jan.samek@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75836 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-03mb/siemens/mc_apl1: Fix wrong register maskingMario Scheithauer
With the previous instruction the complete register was set to '0'. Correctly, only the bits 23:16 must be masked. Change-Id: Idd6e70dcb42c69cf3bc5d36db993e6def52eba58 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76177 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jan Samek <jan.samek@siemens.com>
2023-07-03mb/siemens/mc_apl5: Correct the Tx signal from SATA port 0Mario Scheithauer
Because of an incorrect transmit voltage swing, the signal must be adjusted. The factor of slices for full swing level can be corrected via the High Speed I/O Transmit Control Register 3. The appropriate value of 0.7 V was determined by using an oscilloscope. Change-Id: I965960004ca44f1b37b16ce6484000fa7fd8ad90 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76175 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jan Samek <jan.samek@siemens.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-07-03mb/siemens/mc_apl1: Rename macro 'TX_DWORD3' to 'TX_DWORD3_P1'Mario Scheithauer
The offset '0xa8c' for the High Speed I/O Transmit Control Register 3 refers to SATA port 1 only. To make this clear, change the name of the define from 'TX_DWORD3' to 'TX_DWORD3_P1'. Change-Id: I09d17eeffbe84939297e739586f6b74ed3e2258b Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76174 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Jan Samek <jan.samek@siemens.com>
2023-07-03mb/siemens/{mc_apl3,mc_apl5,mc_apl6}: Remove TX_DWORD3 macroMario Scheithauer
A correction of Tx signal from SATA interface is not necessary on these boards currently. Therefore remove the define and the corresponding code on mc_apl5. Change-Id: I5092ee128cb35e126069d18bb3cbd635e01bbcdb Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76173 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jan Samek <jan.samek@siemens.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-06-19soc/intel/apollolake: Switch to snake case for DisableSataSalpSupportMario Scheithauer
For a unification of the naming convension, change from pascal case to snake case style for parameter 'DisableSataSalpSupport'. Change-Id: I4a68ffd2b68c92434da681b5e5567329c8784c72 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75858 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-15mb/siemens/mc_ehl3/devicetree.cb: Disable USB 3.0 port 1Jan Samek
It's been decided not to use the USB 3.0 port 1 on this board anymore, so disable it also with the corresponding USB 2.0 lane. BUG=none TEST=USB 3.0 port 1 not functional anymore after boot, while others continue working. Change-Id: I2799e3d9d7232743c9480dd9611d94ed3249f53b Signed-off-by: Jan Samek <jan.samek@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75702 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-06-02soc/intel/apollolake: Switch to snake case for SataPortsEnableMario Scheithauer
For a unification of the naming convension, change from pascal case to snake case style for parameter 'SataPortsEnable'. Change-Id: I0df35125360eb42a03d5445011d72842cb2b8d7e Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75553 Reviewed-by: Himanshu Sahdev <himanshu.sahdev@intel.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jan Samek <jan.samek@siemens.com>
2023-06-01mb/siemens/{mc_apl2,mc_apl5,mc_apl6}: Use SSD type for SATA portsMario Scheithauer
There are only SSD connected to SATA ports on this mainboard. To prevent misbehavior, set the correct hard drive type for enabled SATA ports. BUG=none TEST=Boot into OS and check the stability of the SSD Change-Id: I2c2b0548865e87859a1d742295e09a731bfb3f76 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75367 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jan Samek <jan.samek@siemens.com>
2023-06-01mb/siemens/{mc_apl2,mc_apl5,mc_apl6}: Limit SATA speed to Gen 2Mario Scheithauer
Due to mainboard restrictions a SATA link at Gen 3 can cause issues as the margin is not big enough. Limit SATA speed to Gen 2 to achieve a more robust SATA connection. Change-Id: Ifdea4542836b9c75b5507324fbb06b9566a6fe1d Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75365 Reviewed-by: Jan Samek <jan.samek@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-05-24mb/siemens/mc_ehl1: Enable pi608gp I2C driverJan Samek
Add devicetree and Kconfig entries to enable additional configuration of the Pericom PI7C9X2G608GP PCIe switch on this board variant. The amplitude is being adjusted to 425 mV and de-emphasis level to 6.0 mV. BUG=none TEST=Read out the PCIe config space values of the switch and check if they match with the ones configured over SMBus. Change-Id: I11459f0794278ad614aa6e16c56df1ad578fe2f8 Signed-off-by: Jan Samek <jan.samek@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74434 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2023-05-24mb/siemens/mc_ehl4: Double payload size to 256 bytes for PCIe RP #2, #3Mario Scheithauer
To improve the rate of data transfer for PCIe root port #2 (00:1c.1) and root port #3 (00:1c.2) set the max payload size to 256 bytes for both root ports. Change-Id: I553f6cf090d799fbbaafb925646c6566d6951a86 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75127 Reviewed-by: Jan Samek <jan.samek@siemens.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
2023-05-12mb/siemens/mc_ehl5: Add PTN3460 eDP-to-LVDS bridgeMario Scheithauer
This mainboard contains in addition to its base variant, mc_ehl2, an LCD panel driven through the PTN3460 eDP-to-LVDS bridge. This patch enables the PTN3460 support by adding the device to devicetree.cb and board-specific configuration parameters in lcd_panel.c. BUG=none TEST=Boot with the LCD panel attached and observe whether the picture is stable and free of artifacts coming from wrong resolution and timing. Change-Id: I196d7ceeb7ac241c9b95db2ef791a5f3ff7890a7 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74936 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jan Samek <jan.samek@siemens.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2023-05-12mb/siemens/mc_ehl5: Add new board variant based on mc_ehl2Mario Scheithauer
This mainboard is based on mc_ehl2. In a first step, it contains a copy of mc_ehl2 directory with minimum changes. Special adaptations for mc_ehl5 mainboard will follow in separate commits. Change-Id: Id80f8eb49dd2fed0ed1ffc479d47d8669eca84c9 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74935 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2023-05-11mb/siemens/mc_apl5: Set Full Reset Bit into Reset Control RegisterMario Scheithauer
With the introduction of a new Linux version a problem has appeared after a software initiated reset via CF9h register. The problem manifests itself in the fact that the Linux kernel does not start after the reboot. The problem is solved by setting bit 3 to 1 in Reset Control Register (I/O port CF9h). This leads to the fact that the PCH will drive SLP_S3 active low in the reset sequence. It leads to the same behavior as in commit 04ea73ee78bc ("siemens/mc_apl3: Set Full Reset Bit into Reset Control Register") explained. Change-Id: Ia8b7f997ca6234add569da751e1070144790e258 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75041 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jan Samek <jan.samek@siemens.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2023-05-11mb/siemens/mc_apl: Correct multi-line comment style for all Siemens APL BoardsMario Scheithauer
Change-Id: I6578aee52e6900b25441dc119383856acc480231 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75042 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jan Samek <jan.samek@siemens.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2023-05-11mb/siemens/mc_ehl: Remove '_' from mainboard model option in Kconfig.nameMario Scheithauer
An underscore has crept into the mainboard model option for mc_ehl3 and mc_ehl4 by mistake. This patch fixes the incorrect entry. Change-Id: Ie59619877fb6341a5bbfe91c13e7692943480ad0 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75040 Reviewed-by: Jan Samek <jan.samek@siemens.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-05-11mb/siemens/mc_ehl1: Use SSD type for SATA portsMario Scheithauer
There are only SSD connected to SATA ports on this mainboard. To prevent misbehavior, set the correct hard drive type for enabled SATA ports. BUG=none TEST=Boot into OS and check the stability of the SSD Change-Id: I116b1e36f0582956604c3c2508961ffb3de0898a Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74947 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jan Samek <jan.samek@siemens.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2023-05-04mb/siemens/mc_ehl: Remove subdir 'spd' from MakefileMario Scheithauer
Since commit 833bb448c521 ("mb/siemens/mc_ehl: Remove spd.bin from CBFS"), the subdir 'spd' is no longer necessary. Change-Id: Ibaf44e3181b2167aa83cffcc59835196e4cb5cdb Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74780 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jan Samek <jan.samek@siemens.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2023-05-01mb/siemens/mc_ehl: Remove wrong comment regarding spd.binWerner Zeh
The support for a spd.bin from CBFS was removed for all mc_ehl boards in commit 833bb448c5213 (mb/siemens/mc_ehl: Remove spd.bin from CBFS). There is still a remaining comment in romstage_fsp_params.c referring to the removed capability. This fix removes the spd.bin related part of the comment to stay consistent with the code. Change-Id: I669ee1c33d1d1c47764640982f71129195e63f14 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74801 Reviewed-by: Jan Samek <jan.samek@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2023-04-26mb/siemens/mc_ehl4: Enable SD cardMario Scheithauer
This mainboard has SD slot available and therefore it should be enabled. Use the same SD card configuration as for mc_ehl2 mainboard. Change-Id: Icd9b25301311679cf93b05ba83a24e551261a020 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74653 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2023-04-26mb/siemens/mc_ehl4: Switch RTC type and connectionMario Scheithauer
This mainboard has the RTC RV-3028-C7 connected to the I2C1. TEST: - Console Log shows no errors for RV-3028-C7 during I2C1 init - Finalize device for I2C 00:52 shows correct date and time Change-Id: I1b4115d7844a0c218fdf92cb1af2da5a95eb4337 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74652 Reviewed-by: Jan Samek <jan.samek@siemens.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-26mb/siemens/mc_ehl4: Adjust USB settingsMario Scheithauer
Correct the USB settings, suitable for this mainboard. Change-Id: I943eb891e2f2d967acfd441c085063dbad49e993 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74651 Reviewed-by: Jan Samek <jan.samek@siemens.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-26mb/siemens/mc_ehl4: Change NC FPGA PCIe RP connection for POST codesMario Scheithauer
Since mc_ehl4 was only a copy of mc_ehl1 in a first step, the default value of the Kconfig switch EARLY_PCI_BRIDGE_FUNCTION must be set to '0'. On this mainboard NC FPGA is connected to PCIe root port #1 (00:1c.0). Change-Id: I15035523d8575d486c3f2d0ffe3916712ee89d7d Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74650 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2023-04-26mb/siemens/mc_ehl4: Adjust GPIOsMario Scheithauer
Since mc_ehl4 was only a copy of mc_ehl1 in a first step, the GPIOs must be adjust according to the circuit diagram for this mainboard. Change-Id: I66bfbb380e9a05b3a2c08d5d1980e9749b46ee43 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74628 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2023-04-11mb/siemens/mc_ehl2: Fix GPIO settings for latest HW revisionMario Scheithauer
With the latest hardware revision, the two GPIOs GPD11 and GPP_C8 are no longer used. BUG=none TEST=Checked output verbose GPIO debug messages Change-Id: Ia06f93aee4eccb0e4230f0c3ef53922d42701f21 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74201 Reviewed-by: Jan Samek <jan.samek@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2023-03-23soc/intel/elkhartlake: Define DIMM_SPD_SIZE in SoC KconfigMichał Żygowski
The default SPD size is set to 256 bytes, instead of 512 for LPDDR4/DDR4 if not overridden by the mainboard Kconfig. This caused the SMBus libraries to read only the lower half of the DIMM SPD on protectli/vault_ehl. The lower half of the SPD passed to FSP causes a bug in DIMM change detection, which relies on the CRC of the manufacturer bytes in the upper half of the SPD (CRC of zero bytes always gives zero so no change was assumed). Setting the DIMM SPD size to 512 fixes it. Setting the SPD size in SoC will also avoid such problems in the future Elkhart Lake ports. Elkhart Lake supports only LPDDR4/DDR4 so providing the correct default of 512 bytes is an obvious thing to do. TEST=Boot Protectli VP2420 (vault_ehl) with different DIMMs and see FSP is retraining the memory instead of doing the fastboot with old DIMM data. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I998ed8781951034419cadc26c04ff1e0a124b267 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73933 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-21mb/siemens/mc_ehl4: Limit PCIe root port #4 and #5 speed to Gen 1Mario Scheithauer
Due to a non-optimal RX signal (receive) on PCIe root port #4 (00:1c.3) and #5 (00:1c.4), the speed must be limit to Gen 1. BUG=none TEST=RX signal measured with oscilloscope Change-Id: I695c0ef961290676fe421b6efd631d6e94d6d556 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73767 Reviewed-by: Jan Samek <jan.samek@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
2023-03-21mb/siemens/mc_ehl4: Enable PCIe devicesMario Scheithauer
Correct the remaining PCI devices, differing from the ehl1 mainboard. Change-Id: Ie09188b72a62c4d5cba2fcda6f60f3bc0098633e Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73765 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jan Samek <jan.samek@siemens.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
2023-03-03drv/i2c/ptn3460: Add 'mainboard' prefix to mainboard-level callbacksJan Samek
As discused earlier, the callback name 'mb_adjust_cfg' was considered too generic. The new naming is chosen to be consistent with other drivers' callback names designed to be used at mainboard level. Also other functions, namely 'mb_get_edid' and 'mb_select_edid_table' are renamed accordingly. BUG=none TEST=Builds for siemens/mc_apl{1,4,5,7} and siemens/mc_ehl boards complete successfully. Change-Id: I4cbec0e72e5f03e94df0faa36765d1a6cd873a7a Signed-off-by: Jan Samek <jan.samek@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72629 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2023-03-02mb/siemens/mc_ehl*: Correct comment in gpio.cMario Scheithauer
There were two wrong comments in all mc_ehl gpio.c files. This patch corrects the incorrect comments. Change-Id: Iea356db177227d89b91be32a4e2367c612b77350 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72458 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-02mb/siemens/mc_ehl4: Remove TPM from devicetree and KconfigMario Scheithauer
This mainboard does not use security features like TPM. Change-Id: Ieebbf12fc844573ffadb089da78062dd2033517a Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72429 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2023-03-02mb/siemens/mc_ehl: Move TPM Kconfig switches to variantsMario Scheithauer
The upcoming mc_ehl4 variant is the first Siemens Elkhart Lake mainboard without a TPM. For this reason, the corresponding Kconfig switches must be moved to variant level. To prevent Jenkins build from complaining, the TPM is removed in the following patch. Change-Id: Ic73ccd1b52e57c1cf1dd7337b0e28beaadbece8e Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72428 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2023-03-02mb/siemens/mc_ehl2: Set RGMII output impedance manuallyMario Scheithauer
Measurements have shown that the automatic calibrated values for RGMII output impedances are too low. For this reason, set the PMOS value to 16 and the NMOS to 13. Change-Id: Ic3382889d3281faccb03819f9680a9763703b2a1 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73019 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-02mb/siemens/mc_ehl4: Add new board variant based on mc_ehl1Mario Scheithauer
This mainboard is based on mc_ehl1. In a first step, it contains a copy of mc_ehl1 directory with minimum changes. Special adaptations for mc_ehl4 mainboard will follow in separate commits. Change-Id: I3c1f2cf4a3dcae58895f6d14a7fce46b2825e6ba Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72427 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-02mb/siemens/mc_ehl2: Fix GPIO settingsMario Scheithauer
With the latest hardware revision, the two GPIOs GPP_B15 and GPP_E19 are no longer connected to a native function. BUG=none TEST=Checked output verbose GPIO debug messages Change-Id: I266612f041b749aa83b366497b4211fc075c7bd7 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73341 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jan Samek <jan.samek@siemens.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2023-03-01mb/siemens/mc_ehl3/lcd_panel.c: Set LVDS re-power delay to 1 sJan Samek
The currently used panel type could work with 500 ms but increasing the value to 1 second allows to use a wider range of LVDS LCD panels, as many of them specify the delay of 1 s as minimum. BUG=none TEST=Test link stability using a panel with minimum re-power delay of 1 s. Change-Id: I2dd86e791c1212b67a80d7e6cfc474ad91b26c6b Signed-off-by: Jan Samek <jan.samek@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2023-02-03soc/intel/apl: Move cpu cluster to chipset.cbArthur Heymans
Change-Id: I7eaf625e5acfcefdae7c81e186de36b42c06ee67 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72704 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Sean Rhodes <sean@starlabs.systems>
2023-02-02drv/i2c/ptn3460: Use PTN_EDID_LEN instead of constantJan Samek
Contents of the EDID are passed by a reference to an array of length 0x80, for which the macro 'PTN_EDID_LEN' has already been around. This patch makes use of this macro within the driver and mainboard implementation utilizing it. BUG=none TEST=A successful build of mc_apl{1,4,5,7} and mc_ehl3 mainboards. Change-Id: If7d254aaf45d717133bb426bd08f8f9fe5c05962 Signed-off-by: Jan Samek <jan.samek@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72653 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2023-01-30src/mainboard: Remove unnecessary space after castsElyes Haouas
Change-Id: Id8e1a52279e6a606441eefe30e24bcd44e006aad Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69815 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
2023-01-30mb/siemens/mc_ehl3/gpio.c: Disable PSE GBE0 GPIOJan Samek
Since the PSE GBE0 MAC has been disabled on this board in commit 343644006f89 ("mb/siemens/mc_ehl3/devicetree.cb: Remove TSN GbE 0"), therefore disable the corresponding GPIOs as well. BUG=none TEST=Test link detection and IP assignment on the remaining ports (PSE GBE1 and PCH GBE0) of mc_ehl3. Change-Id: Ifa055f58894688471d68b9b93fcb994fdcb2a568 Signed-off-by: Jan Samek <jan.samek@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72449 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-30mb/*: Remove lapic from devicetreeArthur Heymans
The parallel mp code picks up lapics at runtime, so remove it from all devicetrees that use this codebase. Change-Id: I5258a769c0f0ee4bbc4facc19737eed187b68c73 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69303 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2023-01-27drivers/i2c/ptn3460: Use cb_err in mb_adjust_cfgJan Samek
Return generic coreboot error codes from the mb_adjust_cfg callback used in mainboards instead of '-1' constant and a driver-specific success-indicating define. BUG=none TEST=Boards siemens/mc_apl{1,4,5,7} and siemens/mc_ehl3 build correctly. Change-Id: I5e0d4e67703db518ed239a845f43047f569b94ec Signed-off-by: Jan Samek <jan.samek@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72071 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2023-01-27mb/siemens/mc_apl1/var/mc_apl5: Enable early POSTJan Samek
Enable early POST code display on this variant using the common mc_apl1 baseboard functionality. BUG=none TEST=Boot on mc_apl5 and observe that POST codes are displayed before DRAM training. Change-Id: I390e0ab09ca830637e7a991db77e994d6c358e75 Signed-off-by: Jan Samek <jan.samek@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72386 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-22mb/siemens/mc_apl1/var/mc_apl6: Enable early POSTJan Samek
Enable early POST code display on this variant using the common mc_apl1 baseboard functionality. BUG=none TEST=Boot on mc_apl6 and observe that POST codes are displayed before DRAM training. Change-Id: I2a52c241c383f8ebcf05052e9bc0ba13e63e3728 Signed-off-by: Jan Samek <jan.samek@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72116 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2023-01-22mb/siemens/mc_apl1: Move POST logic to mainboard levelJan Samek
Move logic previously used only in the mc_apl2 variant to the mainboard level so that other variants can also make use of it without code duplication. This functionality on the mc_apl6 variant will be enabled in a follow-up patch. BUG=none TEST=Boot on siemens/mc_apl2 and observe that the POST codes are displayed before DRAM training. Change-Id: I762e328ad06c047d911ce1fc40f12a66cbd14e11 Signed-off-by: Jan Samek <jan.samek@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72115 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2023-01-20mb/siemens: Unify and clean lcd_panel.c coding styleJan Samek
With the addition of the mc_ehl3 board variant, a few points about commenting the code arose either from the review or during the implementation itself. This patch unifies structure of these files, which have a similar structure across more Siemens boards utilizing the PTN3460 eDP-to-LVDS bridge. BUG=none TEST=Check that images for the affected boards can be built. Change-Id: I59820362e1f87e296c5548b9c3cecba4d2710fe7 Signed-off-by: Jan Samek <jan.samek@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72068 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-20mb/siemens/mc_ehl3: Add PTN3460 eDP-to-LVDS bridgeJan Samek
This board contains in addition to its base variant, mc_ehl2, an LCD panel driven through the PTN3460 eDP-to-LVDS bridge. This patch enables the PTN3460 support by adding the device to devicetree.cb and board-specific configuration parameters in lcd_panel.c, based upon a similar implementation in siemens/mc_apl7. BUG=none TEST=Boot with the LCD panel attached and observe whether the picture is stable and free of artifacts coming from wrong resolution, timing etc. Change-Id: Ib8a1a6f47053406e42554c2dd33684165d54be08 Signed-off-by: Jan Samek <jan.samek@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70692 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2023-01-19mb/siemens/mc_ehl3: Use device/mmio.h instead of device/pci_ops.hJan Samek
The {read,write}{16,32}() functions used in this file come from the mmio.h header, so include it directly. BUG=none TEST=Read out the SD card controller (device 1a.1) PCI registers in Linux and check whether the values reflect the ones defined in this file. Change-Id: Iff7b55ef2bf98371b7d7d9114ccf3ebed64772a2 Signed-off-by: Jan Samek <jan.samek@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72009 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2023-01-18mb/siemens/mc_ehl: Remove '_' from mc_ehl3 part numberJan Samek
Change MAINBOARD_PART_NUMBER Kconfig value for mc_ehl3 from "MC_EHL3" to "MC EHL3". Change-Id: Ie548607c5fb62faaed4921af714bc9b912e558a8 Signed-off-by: Jan Samek <jan.samek@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71775 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-13mainboard: Remove duplicated <soc/gpio.h>Elyes Haouas
<gpio.h> chain-include <soc/gpio.h>. Change-Id: Ia57d5cd33c70b6a755babd4db56c64c0e3666f9f Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71817 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-01-11mb/siemens/mc_ehl1: Enable real-time tuningWerner Zeh
Enable the real-time tuning to improve performance in the real-time environment for this mainboard. Change-Id: I91ad7ca58add92b5cc66148aff8378890ee217eb Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71234 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-10mb/siemens/mc_ehl1: Limit SATA speed to Gen 2Werner Zeh
Due to mainboard restrictions a SATA link at Gen 3 (6 Gbps) can cause issues as the margin is not big enough. Limit SATA speed to Gen 2 to achieve a more robust SATA connection. Change-Id: Ia79998db5f959528a4e8e29e570a7f55283adee1 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71230 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-12-23mb/siemens/mc_apl{4,7}: Limit I2C bus speed to 100 kHz on bus 7Werner Zeh
Due to a high I2C bus load on the mainboard I2C frequency of 400 kHz leads to poor signaling. Therefore limit the I2C speed to 100 kHz for this bus. In addition, add a generic I2C device with 100 kHz bus speed to the devicetree so that the OS will not switch to higher clock rates, too. Test= Measure the I2C signals at coreboot and OS runtime and ensure the clock is always at 100 kHz. Change-Id: I6b0a642cd3f5b77331663ac8c76ed0a116ae77ca Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71227 Reviewed-by: Jan Samek <jan.samek@siemens.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-12-21mb/siemens/mc_ehl3/devicetree.cb: Remove TSN GbE 0Jan Samek
Remove the PSE TSN GbE device #0 as it's unused on the board and not visible during the PCI enumeration. Change-Id: I4a7d0e437c4f4a12d3a07564cddeafb7c697c6d3 Signed-off-by: Jan Samek <jan.samek@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70700 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-12-21mb/siemens/mc_ehl3/mainboard.c: Remove XIO2001 register tweaksJan Samek
Contrary to mc_ehl2, which this variant is based on, this board doesn't contain the TI XIO2001 PCIe-to-PCI bridge, which makes the attempts to modify the bridge's registers unnecessary. Change-Id: I6597ceb78e4c790c08a0dfa9535dece33a8f95b8 Signed-off-by: Jan Samek <jan.samek@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70854 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-12-17mb/siemens/mc_ehl3/devicetree.cb: Adapt PCIe root port settingsJan Samek
Based upon hardware differences from mc_ehl2, disable RP7 and enable RP3 and RP5. Change-Id: Iecaa3098c3e4c9ce15254bb8bd1fe6da86d6e706 Signed-off-by: Jan Samek <jan.samek@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70689 Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-12-17mb/siemens/mc_ehl3: Add board variant based on mc_ehl2Jan Samek
Add a new mc_ehl variant, which is based on mc_ehl2 implementation. This patch uses a copy of mc_ehl2 with changes only in naming as a starting point for the new mc_ehl3 variant. Follow-up patches will introduce the functional changes against mc_ehl3. Change-Id: Ie8c18b4f16d88b175ce576c2ef4c2e6ee0b4c306 Signed-off-by: Jan Samek <jan.samek@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70688 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2022-12-10treewide: Include <device/mmio.h> instead of <arch/mmio.h>Elyes Haouas
<device/mmio.h>` chain-include `<arch/mmio.h>: https://doc.coreboot.org/contributing/coding_style.html#headers-and-includes Also sort includes while on it. Change-Id: Ie62e4295ce735a6ca74fbe2499b41aab2e76d506 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70291 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-12-09mb/siemens/*/Makefile.inc: Remove path to non-existent folderElyes Haouas
Found using 'Wmissing-include-dirs' command option. Change-Id: Ie9ff43432215ebc89e6c1ea5f86b248e7fecd943 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70396 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-12-01mb/siemens/mc_ehl2: Disable GSPI2 controllerMario Scheithauer
GSPI2 interface is not used on this mainboard and can be disabled. It will in addition remove the warning of a leftover static device in the log. Change-Id: I6e7462312953d50385ca7bb2f2e0abb8fc3a5886 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69972 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2022-11-25mb/siemens/mc_ehl2: Disable L1 prefetcherMario Scheithauer
As for mainboard mc_ehl1, a hard real-time dependency is also required for this mainboard. The L1 prefetcher on Elkhart Lake is too aggressive which in the end leads to an increased number of cache misses. Disabling the L1 prefetcher boosts up the performance (in some cases by more than 10 %) in this specific use case. Change-Id: I07b27dd672533e693a6c2987d16f54333850760e Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2022-11-24mb/siemens/mc_ehl2: Enable downshift for Marvell PHYsMario Scheithauer
Set downshift counter to 2 for all Marvell PHYs on this mainboard before the PHY downshifts to the next highest speed. Change-Id: I32b5f25a3e1e0f962dff3110143e236992ef8e7d Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69887 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-24mb/siemens/mc_ehl2: Enable Marvell PHY interruptMario Scheithauer
On this mainboard Marvell PHY INTn is routed to LED[2] pin. Change-Id: I28a78afdcf0599bb998f906ce8056a0586e24f33 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69434 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-24mb/siemens/mc_ehl2: Enable Marvell PHY 88E1512 driverMario Scheithauer
This mainboard has three Marvel PHYs connected to the internal SOC GbE controllers. The default LED status after HW reset of this PHYs shows a different mode than what is needed. LED[2] is not connected on this mainboard. This patch sets the following LED status: LED[0] - 7 = On - 1000 Mbps Link, Off - Else LED[1] - 1 = On - Link, Blink - Activity, Off - No Link LED[2] - not connected TEST=Try different register values to verify LED feature. Change-Id: I51d817bc720bf787279777f503efdc17dbb1274d Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69387 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-18mb/siemens/mc_ehl2/devicetree.cb: Use RV3028 bus_speed instead of dummy i2c ↵Jan Samek
device Instead of creating a dummy I2C device in order to force Linux to decrease the I2C bus speed, use the own 'bus_speed' field of RV3028 device config structure. Linux should always set the bus speed to the speed of the slowest device sitting on the bus. Hence the dummy device is not needed here anymore. BUG=none TEST=See if the RV3028 RTC is visible and working (date/time can be set/read) in Linux. At the time, a driver modification is needed to add a match table for the "MCRY3028" ACPI HID. A proper kernel patch is pending. Change-Id: I6e269dc67d1fe2a6747fcf3bee224def7b553f08 Signed-off-by: Jan Samek <jan.samek@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69544 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2022-11-09mb/siemens/mc_ehl2: Provide I2C timing parameter for SSDTWerner Zeh
Provide timing parameter for SSDT generation to achieve the requested 100 kHz speed with a high accuracy. Test: Measure I2C bus clock, high and low times during I2C access from Linux and confirm they match the specification. Change-Id: Ifb6019421b612133b8f25c076519bc0e7200dad8 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69307 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-11-09mb/siemens/mc_ehl2: Add dummy I2C devices to limit the I2C speed in OSWerner Zeh
In Linux, the I2C speed defaults to 400 kHz if there is no device registered in ACPI which requests a different speed. Due to board limitations (layout, bus load), 400 kHz are too fast which results in a timing violation. Therefore, add a dummy I2C device to both used I2C buses (I2C1 and I2C2) with a speed of 100 kHz. This will limit the bus speed in Linux accordingly. Change-Id: I507c53c9ec7f763cef18903609231b1a66ed98fa Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69306 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2022-10-29mb/siemens/mc_ehl: Remove spd.bin from CBFSWerner Zeh
The SPD data for DRAM init has moved into the hwinfo data structure and is therefore not used from spd.bin anymore. spd.bin will not receive any updates, changes will only be done in hwinfo. There is no reason to keep spd.bin around so remove it for both variants. Change-Id: Ie6091b655ba7ff2e01b684266ce34b85593b8623 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68908 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-10-27mb/siemens/mc_apl2: Enable early POST through NC_FPGAJan Samek
Enable early POST code output for this mainboard, using the NC FPGA device on PCIe. This requires the parent PCI bridge to be initialized early. BUG=none TEST=boot on siemens/mc_apl2 and observe whether the POST codes coming from before FSP-M init are visible Change-Id: Ice5fe26e11d0513e6bb0a20f1d8f0483d7b3dc6a Signed-off-by: Jan Samek <jan.samek@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68743 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2022-10-25mb/siemens/mc_ehl1: Disable L1 prefetcherWerner Zeh
The highly real time driven application executed on mc_ehl1 has shown that the L1 prefetcher on Elkhart Lake is too aggressive which in the end leads to an increased number of cache misses. Disabling the L1 prefetcher boosts up the performance (in some cases by more than 10 %) in this specific use case. Change-Id: Id09a7f8f812707cd05bd5e3b530e5c3ad8067b16 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68668 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2022-10-22mb/siemens/mc_ehl: Add FIVR config to devicetree for all variantsWerner Zeh
Add a config for FIVR in devicetree for both, mc_ehl1 and mc_ehl2 variants in order to provide the real delay value for the VCC supply rail. This delay is needed to enable proper switching between different VCC levels based on current system state. Change-Id: Ibccb8ea1b42ccd2ff0a37cbd9651528a2a55ebd6 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68666 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-10-22mb/siemens/mc_apl*: Enable early PCI bridge before FSP-MAngel Pons
Apollo Lake seems to start with PCIe root ports unusable/uninitialized before FspMemoryInit() is called and FSP-M properly initializes these root ports. However, we need the root ports accessible before FspMemoryInit() in certain cases, such as emitting POST codes through a PCIe device. For the initialization to happen properly, certain register writes specified in Apollo Lake IAFW BIOS spec, vol. 2 (#559811), chapter 3.3.1 have to be done. BUG=none TEST=Boot on siemens/mc_apl2 with NC_FPGA_POST_CODE enabled and check that the POST codes are emitted before FspMemoryInit(). Change-Id: If782bfdd5f499dd47c085a0a16b4b15832bc040e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Signed-off-by: Jan Samek <jan.samek@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68223 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-30 05:56:28 +0000