Age | Commit message (Expand) | Author |
2018-04-27 | siemens/mc_apl1: Move board specific things to mc_apl1 variant | Mario Scheithauer |
2018-04-26 | siemens/mc_apl1: Provide baseboard and variant concepts | Mario Scheithauer |
2018-04-24 | compiler.h: add __weak macro | Aaron Durbin |
2018-04-13 | siemens/mc_apl1: Fix accuracy issue with IDT PMIC | Mario Scheithauer |
2018-04-11 | siemens/mc_apl1: Make DRAM configuration more flexible | Mario Scheithauer |
2018-03-16 | soc/intel/apollolake and mainboards: Use pcie_rp_clkreq_pin array | Furquan Shaikh |
2018-02-26 | mb/siemens/mc_bdx1: Avoid dereferencing a NULL pointer | Werner Zeh |
2018-02-15 | siemens/mc_bdx1: Show mainboard hardware version on console | Werner Zeh |
2018-02-15 | siemens/mc_bdx1: Enable PCA9538 I/O expander | Werner Zeh |
2018-01-26 | mb/*/*/cmos.layout: Fix the values for the console level | Arthur Heymans |
2017-11-28 | AMD platforms: Fix ASL comment that implies "\_SB" is southbridge | Martin Roth |
2017-11-07 | siemens/mc_apl1: Select CONFIG_NC_FPGA_NOTIFY_CB_READY | Mario Scheithauer |
2017-11-03 | siemens/mc_apl1: Enable I2C0 with 100kHz | Mario Scheithauer |
2017-11-03 | siemens/mc_apl1: Set coreboot ready LED | Mario Scheithauer |
2017-11-03 | siemens/mc_apl1: Add legacy IRQ routing for PCI devices | Mario Scheithauer |
2017-10-19 | siemens/mc_bdx1: Initialize GPIOs | Werner Zeh |
2017-10-12 | siemens/mc_bdx1: Add delay to wait for legacy devices | Werner Zeh |
2017-09-26 | Use stopwatch_wait_until_expired where applicable | Jonathan Neuschäfer |
2017-09-23 | mb/*/*: Remove rtc nvram configurable baud rate | Arthur Heymans |
2017-09-21 | siemens/mc_apl1: Move SCI to IRQ 10 | Mario Scheithauer |
2017-09-14 | siemens/mc_apl1: Add delay to wait for legacy devices | Werner Zeh |
2017-09-08 | siemens/mc_apl1: Disable internal UARTs | Mario Scheithauer |
2017-09-08 | siemens/mc_apl1: Set bus master bit for on-board PCI device | Mario Scheithauer |
2017-08-23 | AMD fam10 ACPI: Use common fixed sleepstates.asl | Kyösti Mälkki |
2017-08-22 | AMD K8 fam10-15: Consolidate post_cache_as_ram call | Kyösti Mälkki |
2017-08-18 | drivers/i2c/rx6110sa: Drop I2C interface arbitration | Nico Huber |
2017-08-18 | include/device: Split i2c.h into three | Nico Huber |
2017-08-15 | soc/intel/common/block: Add LPC Common code and use it for APL | Ravi Sarawadi |
2017-07-27 | siemens/mc_apl1: Select skip RAPL configuration | Mario Scheithauer |
2017-07-20 | siemens/mc_apl1: Activate ECC for DRAM | Mario Scheithauer |
2017-07-20 | siemens/mc_apl1: Include platform.asl | Mario Scheithauer |
2017-07-18 | siemens/mc_apl1: Disable SDCARD | Mario Scheithauer |
2017-07-14 | K8: Fix indirect includes | Kyösti Mälkki |
2017-07-13 | Rename __attribute__((packed)) --> __packed | Stefan Reinauer |
2017-07-06 | mainboard/[m-w]: add IS_ENABLED() around Kconfig symbol references | Martin Roth |
2017-06-30 | mb/siemens/mc_apl1: Set up RTC backup mode to primary cell | Werner Zeh |
2017-06-30 | mb/siemens/mc_bdx1: Set up RTC backup mode to primary cell | Werner Zeh |
2017-06-29 | mb/siemens/mc_bdx1: Set bus master bit for on-board PCI devices | Werner Zeh |
2017-06-23 | siemens/mc_apl1: Enable decoding for COM 3 on LPC | Mario Scheithauer |
2017-06-23 | siemens/mc_apl1: Disable XDCI | Mario Scheithauer |
2017-06-13 | siemens/mc_apl1: Enable decoding for COM 3 on LPC | Mario Scheithauer |
2017-06-13 | siemens/mc_apl1: Use Siemens NC FPGA driver | Mario Scheithauer |
2017-05-31 | mc_tcu3: Remove all hwinfo files from mainboard directory | Werner Zeh |
2017-05-31 | mc_bdx1: Switch to RTC RX6110SA | Werner Zeh |
2017-05-17 | siemens/mc_apl1: Program eMMC DLL settings | Mario Scheithauer |
2017-05-17 | siemens/mc_apl1: Select external 8250 UART | Mario Scheithauer |
2017-05-11 | siemens/mc_apl1: Add usage of external RTC RX6110 SA | Mario Scheithauer |
2017-05-11 | siemens/mc_apl1: Correct GPIO settings | Mario Scheithauer |
2017-05-05 | mainboard/siemens/mc_apl1: remove unnecessary header | Aaron Durbin |
2017-04-28 | nb/amdk8: Link coherent_ht.c | Arthur Heymans |
2017-04-28 | nb/amd/amdk8: Link reset_test.c | Arthur Heymans |
2017-04-27 | nb/amd/amdk8: Link raminit_f.c | Arthur Heymans |
2017-04-10 | nb/amdk8/(pre_)f.h: Don't declare global variable in header | Arthur Heymans |
2017-04-04 | siemens/mc_apl1: Activate PTN3460 eDP to LVDS bridge IC | Mario Scheithauer |
2017-03-29 | siemens/mc_apl1: Adjust gpio settings | Mario Scheithauer |
2017-03-21 | mainboards: Don’t select `CONSOLE_POST` | Paul Menzel |
2017-03-15 | siemens/mc_apl1: Clean up the code | Mario Scheithauer |
2017-02-20 | siemens/mc_apl1: Set MAC address for all available i210 MACs | Mario Scheithauer |
2017-02-15 | siemens/mc_apl1: Make basic settings for booting the mainboard | Mario Scheithauer |
2017-02-02 | siemens/mc_apl1: Add new mainboard | Mario Scheithauer |
2017-01-13 | fsp_baytrail: Enable graphic init per default | Werner Zeh |
2016-12-26 | amd-based mainboards: Fix whitespace in _PTS comments | Marshall Dawson |
2016-12-06 | cpu/amd/mtrr.h: Drop excessive includes | Kyösti Mälkki |
2016-12-06 | cpu/x86/msr.h: Drop excessive includes | Kyösti Mälkki |
2016-12-06 | cpu/cpu.h: Drop excessive includes | Kyösti Mälkki |
2016-12-06 | CPU: Move SMM prototypes under x86 | Kyösti Mälkki |
2016-12-06 | mc_tcu3: Do not abort initialization of PTN3460 when HW-ID is missing | Werner Zeh |
2016-11-24 | mc_tcu3: Swap LVDS even and odd lanes for a certain hardware | Werner Zeh |
2016-11-21 | mb/siemens/sitemp_g1p1/cmos.layout: Re-add cmos_defaults_loaded | Nico Huber |
2016-10-05 | siemens/mc_tcu3: Increase LCD backlight turn-on delay to 500 ms | Werner Zeh |
2016-10-04 | mainboard/siemens/sitemp_g1p1: Use tabs for indents | Elyes HAOUAS |
2016-10-01 | mainboard/*/*/*/usb.asl: Use tabs for indents | Elyes HAOUAS |
2016-09-26 | mainboard/*/*/dsdt.asl: Use tabs for indents | Elyes HAOUAS |
2016-09-26 | mainboard/*/*/mptable.c: Improve code formatting | Elyes HAOUAS |
2016-09-20 | src/mainboard/lenovo-winent: Add space around operators | Elyes HAOUAS |
2016-09-12 | siemens/mc_bdx1: Enable decoding for COM 3 & COM 4 on LPC | Werner Zeh |
2016-08-17 | mainboard: Clean up boot_option/reboot_bits in cmos.layout | Nico Huber |
2016-08-14 | src/mainboard: Capitalize ROM, RAM, CPU and APIC | Elyes HAOUAS |
2016-08-01 | Remove non-ascii & unprintable characters | Martin Roth |
2016-08-01 | Add newlines at the end of all coreboot files | Martin Roth |
2016-08-01 | siemens/sitemp_g1p1: Fix typo | Patrick Georgi |
2016-07-31 | mainboard: Format irq_tables.c | Paul Menzel |
2016-07-31 | Update degree symbol to utf-8 encoding in comments | Martin Roth |
2016-07-14 | siemens/mc_bdx1: Add usage of external RTC PCF8523 | Werner Zeh |
2016-07-08 | siemens/mc_bdx1: Move SCI to IRQ 10 | Werner Zeh |
2016-07-07 | siemens/mc_bdx1: Set up opcode menu for SPI controller | Werner Zeh |
2016-07-06 | siemens/mc_bdx1: Add usage of Siemens NC FPGA driver | Werner Zeh |
2016-07-05 | siemens/mc_bdx1: Set up MAC address for available i210 MACs | Werner Zeh |
2016-07-05 | intel/i210: Change API for function mainboard_get_mac_address() | Werner Zeh |
2016-05-10 | siemens/mc_tcu3: Don't try to init unsupported panel type | Werner Zeh |
2016-05-09 | siemens/mc_tcu3: Fix spelling of *set up* | Paul Menzel |
2016-05-09 | siemens/mc_tcu3: Add blank lines for better legibility | Paul Menzel |
2016-05-09 | siemens/mc_tcu3: Remove unneeded variable assignment | Paul Menzel |
2016-04-29 | siemens/mc_bdx1: Add new mainboard. | Werner Zeh |
2016-04-28 | drivers/intel/i210: Use uint8_t and friends instead of u8 | Werner Zeh |
2016-04-28 | mc_tcu3: Switch to hwilib instead of own hwinfo implementation | Werner Zeh |
2016-02-25 | mc_tcu3: Enable graphic init code | Werner Zeh |
2016-02-02 | src/: Fix Kcofig symbols missing CONFIG_ prefix | Martin Roth |
2016-01-25 | mc_tcu3: Enable auto generated attributes in cbfs | Werner Zeh |
2015-12-18 | siemens/mc_tcu3: Set GPIO_S0_SC[75] to output | Werner Zeh |