summaryrefslogtreecommitdiff
path: root/src/mainboard/siemens
AgeCommit message (Expand)Author
2018-05-31cpu/x86/mtrr: Get rid of CACHE_ROM_SIZE_OVERRIDENico Huber
2018-05-31Remove all AMD K8 boardsKyösti Mälkki
2018-05-23mb/siemens/sitemp_g1p1: Get rid of device_tKyösti Mälkki
2018-05-15mainboard/amd/*: Remove unused arguments from SIOW ACPI methodMartin Roth
2018-05-08mb/siemens: Get rid of device_tElyes HAOUAS
2018-05-08src/mainboard: Set ACPI OEM ID values to 6 characters longMartin Roth
2018-04-27siemens/mc_apl1: Move board specific things to mc_apl1 variantMario Scheithauer
2018-04-26siemens/mc_apl1: Provide baseboard and variant conceptsMario Scheithauer
2018-04-24compiler.h: add __weak macroAaron Durbin
2018-04-13siemens/mc_apl1: Fix accuracy issue with IDT PMICMario Scheithauer
2018-04-11siemens/mc_apl1: Make DRAM configuration more flexibleMario Scheithauer
2018-03-16soc/intel/apollolake and mainboards: Use pcie_rp_clkreq_pin arrayFurquan Shaikh
2018-02-26mb/siemens/mc_bdx1: Avoid dereferencing a NULL pointerWerner Zeh
2018-02-15siemens/mc_bdx1: Show mainboard hardware version on consoleWerner Zeh
2018-02-15siemens/mc_bdx1: Enable PCA9538 I/O expanderWerner Zeh
2018-01-26mb/*/*/cmos.layout: Fix the values for the console levelArthur Heymans
2017-11-28AMD platforms: Fix ASL comment that implies "\_SB" is southbridgeMartin Roth
2017-11-07siemens/mc_apl1: Select CONFIG_NC_FPGA_NOTIFY_CB_READYMario Scheithauer
2017-11-03siemens/mc_apl1: Enable I2C0 with 100kHzMario Scheithauer
2017-11-03siemens/mc_apl1: Set coreboot ready LEDMario Scheithauer
2017-11-03siemens/mc_apl1: Add legacy IRQ routing for PCI devicesMario Scheithauer
2017-10-19siemens/mc_bdx1: Initialize GPIOsWerner Zeh
2017-10-12siemens/mc_bdx1: Add delay to wait for legacy devicesWerner Zeh
2017-09-26Use stopwatch_wait_until_expired where applicableJonathan Neuschäfer
2017-09-23mb/*/*: Remove rtc nvram configurable baud rateArthur Heymans
2017-09-21siemens/mc_apl1: Move SCI to IRQ 10Mario Scheithauer
2017-09-14siemens/mc_apl1: Add delay to wait for legacy devicesWerner Zeh
2017-09-08siemens/mc_apl1: Disable internal UARTsMario Scheithauer
2017-09-08siemens/mc_apl1: Set bus master bit for on-board PCI deviceMario Scheithauer
2017-08-23AMD fam10 ACPI: Use common fixed sleepstates.aslKyösti Mälkki
2017-08-22AMD K8 fam10-15: Consolidate post_cache_as_ram callKyösti Mälkki
2017-08-18drivers/i2c/rx6110sa: Drop I2C interface arbitrationNico Huber
2017-08-18include/device: Split i2c.h into threeNico Huber
2017-08-15soc/intel/common/block: Add LPC Common code and use it for APLRavi Sarawadi
2017-07-27siemens/mc_apl1: Select skip RAPL configurationMario Scheithauer
2017-07-20siemens/mc_apl1: Activate ECC for DRAMMario Scheithauer
2017-07-20siemens/mc_apl1: Include platform.aslMario Scheithauer
2017-07-18siemens/mc_apl1: Disable SDCARDMario Scheithauer
2017-07-14K8: Fix indirect includesKyösti Mälkki
2017-07-13Rename __attribute__((packed)) --> __packedStefan Reinauer
2017-07-06mainboard/[m-w]: add IS_ENABLED() around Kconfig symbol referencesMartin Roth
2017-06-30mb/siemens/mc_apl1: Set up RTC backup mode to primary cellWerner Zeh
2017-06-30mb/siemens/mc_bdx1: Set up RTC backup mode to primary cellWerner Zeh
2017-06-29mb/siemens/mc_bdx1: Set bus master bit for on-board PCI devicesWerner Zeh
2017-06-23siemens/mc_apl1: Enable decoding for COM 3 on LPCMario Scheithauer
2017-06-23siemens/mc_apl1: Disable XDCIMario Scheithauer
2017-06-13siemens/mc_apl1: Enable decoding for COM 3 on LPCMario Scheithauer
2017-06-13siemens/mc_apl1: Use Siemens NC FPGA driverMario Scheithauer
2017-05-31mc_tcu3: Remove all hwinfo files from mainboard directoryWerner Zeh
2017-05-31mc_bdx1: Switch to RTC RX6110SAWerner Zeh
2017-05-17siemens/mc_apl1: Program eMMC DLL settingsMario Scheithauer
2017-05-17siemens/mc_apl1: Select external 8250 UARTMario Scheithauer
2017-05-11siemens/mc_apl1: Add usage of external RTC RX6110 SAMario Scheithauer
2017-05-11siemens/mc_apl1: Correct GPIO settingsMario Scheithauer
2017-05-05mainboard/siemens/mc_apl1: remove unnecessary headerAaron Durbin
2017-04-28nb/amdk8: Link coherent_ht.cArthur Heymans
2017-04-28nb/amd/amdk8: Link reset_test.cArthur Heymans
2017-04-27nb/amd/amdk8: Link raminit_f.cArthur Heymans
2017-04-10nb/amdk8/(pre_)f.h: Don't declare global variable in headerArthur Heymans
2017-04-04siemens/mc_apl1: Activate PTN3460 eDP to LVDS bridge ICMario Scheithauer
2017-03-29siemens/mc_apl1: Adjust gpio settingsMario Scheithauer
2017-03-21mainboards: Don’t select `CONSOLE_POST`Paul Menzel
2017-03-15siemens/mc_apl1: Clean up the codeMario Scheithauer
2017-02-20siemens/mc_apl1: Set MAC address for all available i210 MACsMario Scheithauer
2017-02-15siemens/mc_apl1: Make basic settings for booting the mainboardMario Scheithauer
2017-02-02siemens/mc_apl1: Add new mainboardMario Scheithauer
2017-01-13fsp_baytrail: Enable graphic init per defaultWerner Zeh
2016-12-26amd-based mainboards: Fix whitespace in _PTS commentsMarshall Dawson
2016-12-06cpu/amd/mtrr.h: Drop excessive includesKyösti Mälkki
2016-12-06cpu/x86/msr.h: Drop excessive includesKyösti Mälkki
2016-12-06cpu/cpu.h: Drop excessive includesKyösti Mälkki
2016-12-06CPU: Move SMM prototypes under x86Kyösti Mälkki
2016-12-06mc_tcu3: Do not abort initialization of PTN3460 when HW-ID is missingWerner Zeh
2016-11-24mc_tcu3: Swap LVDS even and odd lanes for a certain hardwareWerner Zeh
2016-11-21mb/siemens/sitemp_g1p1/cmos.layout: Re-add cmos_defaults_loadedNico Huber
2016-10-05siemens/mc_tcu3: Increase LCD backlight turn-on delay to 500 msWerner Zeh
2016-10-04mainboard/siemens/sitemp_g1p1: Use tabs for indentsElyes HAOUAS
2016-10-01mainboard/*/*/*/usb.asl: Use tabs for indentsElyes HAOUAS
2016-09-26mainboard/*/*/dsdt.asl: Use tabs for indentsElyes HAOUAS
2016-09-26mainboard/*/*/mptable.c: Improve code formattingElyes HAOUAS
2016-09-20src/mainboard/lenovo-winent: Add space around operatorsElyes HAOUAS
2016-09-12siemens/mc_bdx1: Enable decoding for COM 3 & COM 4 on LPCWerner Zeh
2016-08-17mainboard: Clean up boot_option/reboot_bits in cmos.layoutNico Huber
2016-08-14src/mainboard: Capitalize ROM, RAM, CPU and APICElyes HAOUAS
2016-08-01Remove non-ascii & unprintable charactersMartin Roth
2016-08-01Add newlines at the end of all coreboot filesMartin Roth
2016-08-01siemens/sitemp_g1p1: Fix typoPatrick Georgi
2016-07-31mainboard: Format irq_tables.cPaul Menzel
2016-07-31Update degree symbol to utf-8 encoding in commentsMartin Roth
2016-07-14siemens/mc_bdx1: Add usage of external RTC PCF8523Werner Zeh
2016-07-08siemens/mc_bdx1: Move SCI to IRQ 10Werner Zeh
2016-07-07siemens/mc_bdx1: Set up opcode menu for SPI controllerWerner Zeh
2016-07-06siemens/mc_bdx1: Add usage of Siemens NC FPGA driverWerner Zeh
2016-07-05siemens/mc_bdx1: Set up MAC address for available i210 MACsWerner Zeh
2016-07-05intel/i210: Change API for function mainboard_get_mac_address()Werner Zeh
2016-05-10siemens/mc_tcu3: Don't try to init unsupported panel typeWerner Zeh
2016-05-09siemens/mc_tcu3: Fix spelling of *set up*Paul Menzel
2016-05-09siemens/mc_tcu3: Add blank lines for better legibilityPaul Menzel
2016-05-09siemens/mc_tcu3: Remove unneeded variable assignmentPaul Menzel
2016-04-29siemens/mc_bdx1: Add new mainboard.Werner Zeh