Age | Commit message (Expand) | Author |
2017-04-10 | nb/amdk8/(pre_)f.h: Don't declare global variable in header | Arthur Heymans |
2017-04-04 | siemens/mc_apl1: Activate PTN3460 eDP to LVDS bridge IC | Mario Scheithauer |
2017-03-29 | siemens/mc_apl1: Adjust gpio settings | Mario Scheithauer |
2017-03-21 | mainboards: Don’t select `CONSOLE_POST` | Paul Menzel |
2017-03-15 | siemens/mc_apl1: Clean up the code | Mario Scheithauer |
2017-02-20 | siemens/mc_apl1: Set MAC address for all available i210 MACs | Mario Scheithauer |
2017-02-15 | siemens/mc_apl1: Make basic settings for booting the mainboard | Mario Scheithauer |
2017-02-02 | siemens/mc_apl1: Add new mainboard | Mario Scheithauer |
2017-01-13 | fsp_baytrail: Enable graphic init per default | Werner Zeh |
2016-12-26 | amd-based mainboards: Fix whitespace in _PTS comments | Marshall Dawson |
2016-12-06 | cpu/amd/mtrr.h: Drop excessive includes | Kyösti Mälkki |
2016-12-06 | cpu/x86/msr.h: Drop excessive includes | Kyösti Mälkki |
2016-12-06 | cpu/cpu.h: Drop excessive includes | Kyösti Mälkki |
2016-12-06 | CPU: Move SMM prototypes under x86 | Kyösti Mälkki |
2016-12-06 | mc_tcu3: Do not abort initialization of PTN3460 when HW-ID is missing | Werner Zeh |
2016-11-24 | mc_tcu3: Swap LVDS even and odd lanes for a certain hardware | Werner Zeh |
2016-11-21 | mb/siemens/sitemp_g1p1/cmos.layout: Re-add cmos_defaults_loaded | Nico Huber |
2016-10-05 | siemens/mc_tcu3: Increase LCD backlight turn-on delay to 500 ms | Werner Zeh |
2016-10-04 | mainboard/siemens/sitemp_g1p1: Use tabs for indents | Elyes HAOUAS |
2016-10-01 | mainboard/*/*/*/usb.asl: Use tabs for indents | Elyes HAOUAS |
2016-09-26 | mainboard/*/*/dsdt.asl: Use tabs for indents | Elyes HAOUAS |
2016-09-26 | mainboard/*/*/mptable.c: Improve code formatting | Elyes HAOUAS |
2016-09-20 | src/mainboard/lenovo-winent: Add space around operators | Elyes HAOUAS |
2016-09-12 | siemens/mc_bdx1: Enable decoding for COM 3 & COM 4 on LPC | Werner Zeh |
2016-08-17 | mainboard: Clean up boot_option/reboot_bits in cmos.layout | Nico Huber |
2016-08-14 | src/mainboard: Capitalize ROM, RAM, CPU and APIC | Elyes HAOUAS |
2016-08-01 | Remove non-ascii & unprintable characters | Martin Roth |
2016-08-01 | Add newlines at the end of all coreboot files | Martin Roth |
2016-08-01 | siemens/sitemp_g1p1: Fix typo | Patrick Georgi |
2016-07-31 | mainboard: Format irq_tables.c | Paul Menzel |
2016-07-31 | Update degree symbol to utf-8 encoding in comments | Martin Roth |
2016-07-14 | siemens/mc_bdx1: Add usage of external RTC PCF8523 | Werner Zeh |
2016-07-08 | siemens/mc_bdx1: Move SCI to IRQ 10 | Werner Zeh |
2016-07-07 | siemens/mc_bdx1: Set up opcode menu for SPI controller | Werner Zeh |
2016-07-06 | siemens/mc_bdx1: Add usage of Siemens NC FPGA driver | Werner Zeh |
2016-07-05 | siemens/mc_bdx1: Set up MAC address for available i210 MACs | Werner Zeh |
2016-07-05 | intel/i210: Change API for function mainboard_get_mac_address() | Werner Zeh |
2016-05-10 | siemens/mc_tcu3: Don't try to init unsupported panel type | Werner Zeh |
2016-05-09 | siemens/mc_tcu3: Fix spelling of *set up* | Paul Menzel |
2016-05-09 | siemens/mc_tcu3: Add blank lines for better legibility | Paul Menzel |
2016-05-09 | siemens/mc_tcu3: Remove unneeded variable assignment | Paul Menzel |
2016-04-29 | siemens/mc_bdx1: Add new mainboard. | Werner Zeh |
2016-04-28 | drivers/intel/i210: Use uint8_t and friends instead of u8 | Werner Zeh |
2016-04-28 | mc_tcu3: Switch to hwilib instead of own hwinfo implementation | Werner Zeh |
2016-02-25 | mc_tcu3: Enable graphic init code | Werner Zeh |
2016-02-02 | src/: Fix Kcofig symbols missing CONFIG_ prefix | Martin Roth |
2016-01-25 | mc_tcu3: Enable auto generated attributes in cbfs | Werner Zeh |
2015-12-18 | siemens/mc_tcu3: Set GPIO_S0_SC[75] to output | Werner Zeh |
2015-12-16 | intel/fsp_baytrail: rename include folder baytrail to include/soc | Ben Gardner |
2015-12-16 | southbridge/amd/sb600: Update HPET base address with #define | Martin Roth |
2015-12-10 | ACPI: Work around IASL warning reading/writing same register | Martin Roth |
2015-12-10 | ACPI: Fix IASL Warning about unused method for _OSI check | Martin Roth |
2015-12-06 | fsp_baytrail: Change A, A, A, A IRQ routing to A, A, A, B | Martin Roth |
2015-11-20 | siemens/mc_tcu3: Clear checksums in hwinfo | Werner Zeh |
2015-11-10 | mainboard/**/irq_tables.c: Remove reference to getpir | Patrick Georgi |
2015-11-05 | mainboard: Remove last_boot NVRAM option | Timothy Pearson |
2015-10-31 | tree: drop last paragraph of GPL copyright header | Patrick Georgi |
2015-10-29 | mainboard: Convert #ifdef to IS_ENABLED in get_bus_conf.c | Timothy Pearson |
2015-10-24 | amd/acpi: Clean up SMBus references. | Tobias Diedrich |
2015-10-02 | mc_tcu3: Remove dummy blocks from hwinfo.hex | Werner Zeh |
2015-10-02 | mc_tcu3: Enable the usage of blobs. | Werner Zeh |
2015-09-07 | intel: Do not hardcode the position of mrc.cache | Alexandru Gagniuc |
2015-09-04 | mc_tcu3: Adjust gpio settings | Werner Zeh |
2015-09-03 | mc_tcu3: Extend hwinfo.hex and remove version.hex. | Werner Zeh |
2015-07-04 | Kconfig: Fix references to obsolete symbols | Martin Roth |
2015-07-02 | Move baytrail & fsp_baytrail to the common IFD interface. | Martin Roth |
2015-06-27 | Kconfig: Remove unnecessary and incorrect MRC_CACHE symbols | Martin Roth |
2015-06-08 | Remove empty lines at end of file | Elyes HAOUAS |
2015-06-05 | device_ops: add device_t argument to acpi_inject_dsdt_generator | Alexander Couzens |
2015-06-05 | AMD K8 fam10: Refactor Kconfig SB_HT_CHAIN_ON_BUS0 | Kyösti Mälkki |
2015-06-02 | cbfs: new API and better program loading | Aaron Durbin |
2015-05-23 | baytrail: Switch to per-device ACPI | Vladimir Serbinenko |
2015-05-21 | Remove address from GPLv2 headers | Patrick Georgi |
2015-05-21 | Remove unused functions | Patrick Georgi |
2015-04-24 | fsp: Move fsp to fsp1_0 | Marc Jones |
2015-04-18 | kconfig: automatically include mainboards | Stefan Reinauer |
2015-03-30 | Update hex values to CBFS binary name types in Makefiles | Martin Roth |
2015-03-13 | siemens/mc_tcu3: Fix build and ACPI IRQ bridge entry | Kyösti Mälkki |
2015-03-05 | mainboard/siemens/mc_tcu3: Add new mainboard. | Werner Zeh |
2015-02-16 | acpi: Generate valid ACPI processor objects | Timothy Pearson |
2015-02-16 | mainboard/cmos: Kill off unused boot_* parameters | Timothy Pearson |
2015-02-16 | mainboard/cmos: Move ECC variables out of fallback mechanism byte | Timothy Pearson |
2015-02-16 | mainboard/cmos: Delete obsolete commented parameters | Timothy Pearson |
2015-02-15 | x86: Change MMIO addr in readN(addr)/writeN(addr, val) to pointer | Kevin Paul Herbert |
2015-01-09 | src/mainboard: Doxygen fixes | Martin Roth |
2015-01-06 | mainboard/*/romstage.c: Fix 'lib/delay.c' inclusion | Edward O'Callaghan |
2015-01-06 | mainboard/*/romstage.c: Sanitize system header inclusions | Edward O'Callaghan |
2014-12-09 | mainboard/siemens/sitemp_g1p1/mainboard.c: Fix implicit conversion | Edward O'Callaghan |
2014-12-08 | mainboard/siemens/sitemp_g1p1/mainboard.c: Remove unicode in string | Edward O'Callaghan |
2014-11-22 | amdk8: Move to implicit length patching | Vladimir Serbinenko |
2014-10-24 | siemens/sitemp_g1p1: Fix serial output for simo board | Dennis Wassenberg |
2014-10-19 | amd: rename model_fxx_powernow to powernow. | Vladimir Serbinenko |
2014-10-16 | amdk8: Move to per-device ACPI | Vladimir Serbinenko |
2014-07-24 | siemens/sitemp_g1p1: Remove a trailing whitespace | Elyes HAOUAS |
2014-07-18 | mainboard: Trivial - drop trailing blank lines at EOF | Edward O'Callaghan |
2014-07-17 | mainboard,Makefile.inc: Trivial - drop trailing blank lines at EOF | Edward O'Callaghan |
2014-07-17 | mainboard,ASL: Trivial - drop trailing blank lines at EOF | Edward O'Callaghan |
2014-07-08 | mainboard: Trivial - drop trailing blank lines at EOF | Edward O'Callaghan |
2014-06-26 | AMD boards: Fix typos | Kyösti Mälkki |
2014-06-26 | PIRQ tables: Fix typos | Kyösti Mälkki |