coreboot.git - my copy of coreboot

Age	Commit message (Expand)	Author
2018-10-17	mb//: Clean up FADT checksum assignment	Jonathan Neuschäfer
2018-08-13	src/mb: Remove some unneeded includes	Elyes HAOUAS
2018-05-31	cpu/x86/mtrr: Get rid of CACHE_ROM_SIZE_OVERRIDE	Nico Huber
2018-05-08	mb/siemens: Get rid of device_t	Elyes HAOUAS
2018-02-26	mb/siemens/mc_bdx1: Avoid dereferencing a NULL pointer	Werner Zeh
2018-02-15	siemens/mc_bdx1: Show mainboard hardware version on console	Werner Zeh
2018-02-15	siemens/mc_bdx1: Enable PCA9538 I/O expander	Werner Zeh
2018-01-26	mb///cmos.layout: Fix the values for the console level	Arthur Heymans
2017-10-19	siemens/mc_bdx1: Initialize GPIOs	Werner Zeh
2017-10-12	siemens/mc_bdx1: Add delay to wait for legacy devices	Werner Zeh
2017-09-23	mb//: Remove rtc nvram configurable baud rate	Arthur Heymans
2017-08-18	drivers/i2c/rx6110sa: Drop I2C interface arbitration	Nico Huber
2017-07-06	mainboard/[m-w]: add IS_ENABLED() around Kconfig symbol references	Martin Roth
2017-06-30	mb/siemens/mc_bdx1: Set up RTC backup mode to primary cell	Werner Zeh
2017-06-29	mb/siemens/mc_bdx1: Set bus master bit for on-board PCI devices	Werner Zeh
2017-05-31	mc_bdx1: Switch to RTC RX6110SA	Werner Zeh
2017-03-21	mainboards: Don’t select `CONSOLE_POST`	Paul Menzel
2016-09-12	siemens/mc_bdx1: Enable decoding for COM 3 & COM 4 on LPC	Werner Zeh
2016-08-17	mainboard: Clean up boot_option/reboot_bits in cmos.layout	Nico Huber
2016-08-01	Add newlines at the end of all coreboot files	Martin Roth
2016-07-14	siemens/mc_bdx1: Add usage of external RTC PCF8523	Werner Zeh
2016-07-08	siemens/mc_bdx1: Move SCI to IRQ 10	Werner Zeh
2016-07-07	siemens/mc_bdx1: Set up opcode menu for SPI controller	Werner Zeh
2016-07-06	siemens/mc_bdx1: Add usage of Siemens NC FPGA driver	Werner Zeh
2016-07-05	siemens/mc_bdx1: Set up MAC address for available i210 MACs	Werner Zeh
2016-04-29	siemens/mc_bdx1: Add new mainboard.	Werner Zeh