summaryrefslogtreecommitdiff
path: root/src/mainboard/siemens/mc_bdx1
AgeCommit message (Expand)Author
2019-03-08coreboot: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX)Julius Werner
2019-03-06src: Drop unused include <arch/acpi.h>Elyes HAOUAS
2019-03-04device/mmio.h: Add include file for MMIO opsKyösti Mälkki
2019-03-01mb/siemens/mc_bdx1: Enable TPM2 on LPCWerner Zeh
2019-01-06device: Use pcidev_on_root()Kyösti Mälkki
2018-11-23mb: Set coreboot as DSDT's manufacturer model IDElyes HAOUAS
2018-11-21ACPI: Fix DSDT's revision fieldElyes HAOUAS
2018-10-17mb/*/*: Clean up FADT checksum assignmentJonathan Neuschäfer
2018-08-13src/mb: Remove some unneeded includesElyes HAOUAS
2018-05-31cpu/x86/mtrr: Get rid of CACHE_ROM_SIZE_OVERRIDENico Huber
2018-05-08mb/siemens: Get rid of device_tElyes HAOUAS
2018-02-26mb/siemens/mc_bdx1: Avoid dereferencing a NULL pointerWerner Zeh
2018-02-15siemens/mc_bdx1: Show mainboard hardware version on consoleWerner Zeh
2018-02-15siemens/mc_bdx1: Enable PCA9538 I/O expanderWerner Zeh
2018-01-26mb/*/*/cmos.layout: Fix the values for the console levelArthur Heymans
2017-10-19siemens/mc_bdx1: Initialize GPIOsWerner Zeh
2017-10-12siemens/mc_bdx1: Add delay to wait for legacy devicesWerner Zeh
2017-09-23mb/*/*: Remove rtc nvram configurable baud rateArthur Heymans
2017-08-18drivers/i2c/rx6110sa: Drop I2C interface arbitrationNico Huber
2017-07-06mainboard/[m-w]: add IS_ENABLED() around Kconfig symbol referencesMartin Roth
2017-06-30mb/siemens/mc_bdx1: Set up RTC backup mode to primary cellWerner Zeh
2017-06-29mb/siemens/mc_bdx1: Set bus master bit for on-board PCI devicesWerner Zeh
2017-05-31mc_bdx1: Switch to RTC RX6110SAWerner Zeh
2017-03-21mainboards: Don’t select `CONSOLE_POST`Paul Menzel
2016-09-12siemens/mc_bdx1: Enable decoding for COM 3 & COM 4 on LPCWerner Zeh
2016-08-17mainboard: Clean up boot_option/reboot_bits in cmos.layoutNico Huber
2016-08-01Add newlines at the end of all coreboot filesMartin Roth
2016-07-14siemens/mc_bdx1: Add usage of external RTC PCF8523Werner Zeh
2016-07-08siemens/mc_bdx1: Move SCI to IRQ 10Werner Zeh
2016-07-07siemens/mc_bdx1: Set up opcode menu for SPI controllerWerner Zeh
2016-07-06siemens/mc_bdx1: Add usage of Siemens NC FPGA driverWerner Zeh
2016-07-05siemens/mc_bdx1: Set up MAC address for available i210 MACsWerner Zeh
2016-04-29siemens/mc_bdx1: Add new mainboard.Werner Zeh
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 18:38:25 +0000