Age | Commit message (Expand) | Author |
2022-04-21 | tpm: Refactor TPM Kconfig dimensions | Jes B. Klinke |
2022-03-07 | src: Make PCI ID define names shorter | Felix Singer |
2022-02-22 | mb/siemens/mc_apl2: Enable PCI device for I2C bus 0 | Werner Zeh |
2022-02-12 | mb/siemens/mc_apl{2,4,5,6}: Enable recovery MRC cache | Werner Zeh |
2022-02-01 | mb/siemens/{mc_apl1,...,mc_apl6}: Disable SATA ALPM support | Mario Scheithauer |
2021-11-04 | treewide: Replace bad uses of `find_resource` | Angel Pons |
2021-07-26 | mb/*: Specify type of `VARIANT_DIR` once | Angel Pons |
2021-07-26 | mb/*: Specify type of `FMDFILE` once | Angel Pons |
2021-07-26 | mb/*: Specify type of `DEVICETREE` once | Angel Pons |
2021-07-26 | mb/*: Specify type of `MAINBOARD_PART_NUMBER` once | Angel Pons |
2021-07-26 | mb/*: Specify type of `MAINBOARD_DIR` once | Angel Pons |
2021-07-23 | mb/siemens/mc_apl{1,2,3,5,6}: Use PCI_ALLOW_BUS_MASTER_ANY_DEVICE | Werner Zeh |
2021-07-21 | mb/siemens/mc_apl{1,2,3,5,6}: Set PCI bus master bit only if allowed | Werner Zeh |
2021-06-04 | mb/siemens/mc_apl2: Disable unused I2C controllers | Werner Zeh |
2021-06-04 | mb/siemens/mc_apl{1,2,3,5,6}: Provide I2C timings for 400 kHz | Werner Zeh |
2021-05-30 | mb/siemens/mc_apl{1,2,3,5,6}: Disable ACPI-support for RX6110 | Werner Zeh |
2021-05-30 | mb/siemens/mc_apl1: Move gpio.c from baseboard to mc_apl1 | Mario Scheithauer |
2021-05-30 | mb/siemens/{mc_apl2,...,mc_apl6}: Do early UART pad configuration | Mario Scheithauer |
2021-05-02 | mb/siemens/mc_apl{1,2,3,5,6}: Tune I2C frequency | Werner Zeh |
2021-02-16 | mb/siemens/mc_apl1/variants/mc_apl2/mainboard.c: Clean includes | Elyes HAOUAS |
2021-02-15 | src/mb: Remove unused <console/console.h> | Elyes HAOUAS |
2021-02-10 | mb/siemens/mc_apl2: Switch I2C bus for RX6110SA | Mario Scheithauer |
2021-02-02 | mb/siemens/mc_apl1: do UART pad configuration at board-level | Michael Niewöhner |
2021-01-27 | ACPI: Add top-level ASL | Kyösti Mälkki |
2021-01-20 | mb/siemens/{mc_apl1,...,mc_apl6}: Configure FSP-S UPDs | Mario Scheithauer |
2021-01-15 | mb/siemens/mc_apl1: do LPC/eSPI pad configuration at board-level | Michael Niewöhner |
2020-11-30 | mb/siemens/mc_apl1: Deduplicate wait_for_legacy_dev() | Angel Pons |
2020-11-30 | mb/siemens/mc_apl1: Simplify is_mac_adr_valid() logic | Angel Pons |
2020-11-30 | drivers/intel/i210: Define MAC_ADDR_LEN | Angel Pons |
2020-11-30 | mb/siemens/mc_apl1/mainboard.c: Refactor loop body | Angel Pons |
2020-11-23 | mb/siemens/mc_apl1: Use `pci_or_config16` function | Angel Pons |
2020-10-13 | {src/mb,util/autoport}: Use macro for DSDT revision | Elyes HAOUAS |
2020-10-05 | mb/siemens/mc_apl6: Enable eMMC | Mario Scheithauer |
2020-09-19 | apollolake boards: Enable CSE in devicetree | Subrata Banik |
2020-09-10 | mb/siemens/mc_apl2/gpio: Fix code style | Maxim Polyakov |
2020-09-10 | mb/siemens/mc_apl2/gpio: Undo set DRIVER for GPO | Maxim Polyakov |
2020-09-09 | apollolake: Define MAX_CPUS at SoC scope | Angel Pons |
2020-09-09 | apollolake: Limit MAX_CPUS to 4 | Angel Pons |
2020-07-09 | mb/siemens/mc_apl1: Use OPCODE menu set up of fast SPI driver | Werner Zeh |
2020-06-30 | src: Remove whitespaces before tabs | Elyes HAOUAS |
2020-06-19 | Kconfig: Escape variable to accommodate new Kconfig versions | Patrick Georgi |
2020-05-11 | treewide: Remove "this file is part of" lines | Patrick Georgi |
2020-05-02 | acpi: Move ACPI table support out of arch/x86 (3/5) | Furquan Shaikh |
2020-04-04 | mainboard/siemens: Use SPDX for GPL-2.0-only files | Angel Pons |
2020-03-31 | security/vboot: Decouple measured boot from verified boot | Bill XIE |
2020-03-18 | mainboard/[^a-p]*: Remove copyright notices | Patrick Georgi |
2020-01-10 | src: Remove blank acpi_tables source files | Karthikeyan Ramasubramanian |
2019-12-31 | mb/**/dsdt.asl: Remove outdated sleepstates.asl comment | Angel Pons |
2019-12-21 | mb/**/dsdt.asl: Remove "Some generic macros" comment | Angel Pons |
2019-12-20 | src/mainboard: Remove unused '#include <device/pci.h>' | Elyes HAOUAS |
2019-11-23 | Kconfig: comply to Linux 5.3's Kconfig language rules | Patrick Georgi |
2019-11-12 | src/mainboard/siemens: Use PTN3460 chip driver | Uwe Poeche |
2019-11-12 | mb/siemens/mc_apl6: Enable VT-d feature | Werner Zeh |
2019-11-11 | mb/siemens/mc_apl6: Add TPM to devicetree | Werner Zeh |
2019-11-11 | mb/siemens/mc_apl6: Enable SDHCI and disable eMMC controller | Werner Zeh |
2019-11-11 | mb/siemens/mc_apl6: Adjust clock lines used on PCIe-2-PCI bridge | Werner Zeh |
2019-11-11 | mb/siemens/mc_apl6: Enable VBOOT per default | Werner Zeh |
2019-11-11 | mb/siemens/mc_apl6: Add new mainboard based on mc_apl3 | Werner Zeh |
2019-11-01 | soc/intel/{IA-CPU/SOC}: Move sleepstates.asl into southbridge/intel/common/acpi | Subrata Banik |
2019-10-24 | mb/siemens/{mc_apl1, mc_bdx1}: Remove offsets from flashmap files | Werner Zeh |
2019-10-18 | mb/siemens/mc_apl{3,5}: Remove __weak symbol from GPIO functions | Werner Zeh |
2019-09-25 | mb/siemens/mc_apl1: Sort the names of all variant mainboards | Werner Zeh |
2019-09-25 | mb/siemens/mc_apl{2,4,5}: Enable VBOOT | Werner Zeh |
2019-09-05 | mb/siemens/mc_apl5: Disable IGD if no EDID data available | Mario Scheithauer |
2019-07-18 | mb/siemens/{mc_apl1,...,mc_apl5}: Fix GPIO settings | Mario Scheithauer |
2019-07-18 | mb/siemens/mc_apl1: Disable all UHS-I SD-Card speed modes | Mario Scheithauer |
2019-07-12 | mb/siemens/mc_apl3: Enable LPSS UART 1 | Mario Scheithauer |
2019-07-11 | mb/siemens/{baseboard,mc_apl3,mc_apl4,mc_apl5}: Fix GPIO_168 | Mario Scheithauer |
2019-07-11 | mb/siemens/{mc_apl1,...,mc_apl5}: Reduce eMMC bus speed mode | Mario Scheithauer |
2019-06-21 | siemens/mc_apl5: Change PTN interface settings | Mario Scheithauer |
2019-06-21 | siemens/mc_apl5: Enable TPM support | Mario Scheithauer |
2019-06-06 | siemens/mc_apl5: Add own GPIO table | Mario Scheithauer |
2019-05-29 | src/mainboard: Add missing 'include <types.h>' | Elyes HAOUAS |
2019-05-06 | mb/siemens/mc_apl2: Limit SD-Card speed to DDR50 | Werner Zeh |
2019-04-15 | mb/siemens/mc_apl4: Remove usage of external RTC | Werner Zeh |
2019-04-15 | mb/siemens/mc_apl1: Enable HDA in devicetree for all mainboard variants | Werner Zeh |
2019-04-08 | siemens/mc_apl5: Remove reduced clock rate for I2C0 | Mario Scheithauer |
2019-04-04 | siemens/mc_apl4: Provide CLK on APL Pin PMU_SUSCLK | Uwe Poeche |
2019-03-21 | mb/siemens/mc_apl1: use comment in Kconfig.name | Thomas Heijligen |
2019-03-15 | mb/mc_apl1/variants/mc_apl5: Drop unused '#include <lib.h>' | Elyes HAOUAS |
2019-03-06 | mb/siemens/{mc_apl1,mc_tcu3}: Fix typo on "Display" | Elyes HAOUAS |
2019-03-04 | device/mmio.h: Add include file for MMIO ops | Kyösti Mälkki |
2019-03-04 | arch/io.h: Add missing includes | Kyösti Mälkki |
2019-03-01 | device/pci: Fix PCI accessor headers | Kyösti Mälkki |
2019-02-13 | siemens/mc_apl4: Enable HW SPI TPM on mainboard mc_apl4 | Uwe Poeche |
2019-02-13 | siemens/mc_apl2: Remove double entry from devicetree | Mario Scheithauer |
2019-02-05 | mb/siemens/mc_apl1: Enable VTD for mc_apl2 and mc_apl5 | Werner Zeh |
2019-01-30 | siemens/mc_apl2: Change SERIRQ mode | Mario Scheithauer |
2019-01-30 | siemens/mc_apl2: Correct whitespace of devicetree | Mario Scheithauer |
2019-01-30 | siemens/mc_apl2: Activate TPM support | Mario Scheithauer |
2019-01-16 | siemens/mc_apl4: Change UART_FOR_CONSOLE index | Mario Scheithauer |
2019-01-11 | siemens/mc_apl1: Use INTEL_LPSS_UART_FOR_CONSOLE | Mario Scheithauer |
2018-12-17 | siemens/mc_apl4: Enable RTC RX6110SA on this mainboard | Uwe Poeche |
2018-12-17 | siemens/mc_apl4: Enable LVDS Display on mc_apl4 | Uwe Poeche |
2018-12-17 | siemens/mc_apl4: Add GPIO configuration | Uwe Poeche |
2018-11-30 | cpu/intel/common: Use a common acpi/cpu.asl file | Arthur Heymans |
2018-11-29 | siemens/mc_apl5: Disable PCI clock outputs on XIO bridges | Mario Scheithauer |
2018-11-29 | siemens/mc_apl5: Set bus master bit for on-board PCI device | Mario Scheithauer |
2018-11-29 | siemens/mc_apl5: Enable SDCARD | Mario Scheithauer |
2018-11-27 | siemens/mc_apl5: Adjust the settings for the PCIe root ports | Mario Scheithauer |