summaryrefslogtreecommitdiff
path: root/src/mainboard/sapphire/pureplatinumh61/cmos.default
AgeCommit message (Collapse)Author
2017-09-23mb/*/*: Remove rtc nvram configurable baud rateArthur Heymans
There have been discussions about removing this since it does not seem to be used much and only creates troubles for boards without defaults, not to mention that it was configurable on many boards that do not even feature uart. It is still possible to configure the baudrate through the Kconfig option. Change-Id: I71698d9b188eeac73670b18b757dff5fcea0df41 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19682 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-03-27mainboard: Add Sapphire Pure Platinum H61Nicola Corna
This board has a socketed SOIC-8 4 MB flash chip. All the flash regions are unlocked by default but unfortunately flashrom doesn't work with the original firmware and the stock UEFI flash tool refuses to flash the coreboot image (different image ID). For now, the external programmer seems to be the only option for the first coreboot flashing. Tested and working: * Debian GNU/Linux Stretch (with Linux kernel 4.9, SeaBIOS) * Microsoft Windows 7 installer with VGA blob (SeaBIOS) * Internal GPU, both with VGA blob and libgfxinit (VGA and DVI) * External GPU * RAM (tested 8 + 8 GB) * S3 * USB, both the 2.0 and 3.0 ports * Sata * Thermal management * Sound * LAN * Bluetooth * VT-x and VT-d * me_cleaner Not working: * Microsoft Windows 7 installer with libgfxinit Untested: * Backside Mini PCI-E port * DisplayPort and HDMI ports Issues: * The USB is always powered, even is S3 and S5 (like in the original firmware). * Internal flashing with flashrom doesn't work after resuming from S3. * The raminit is unreliable, as the RAM training sometimes fails and sometimes succeeds, with the same couple of RAMs. Once a MRC cache has been created, the raminit works fine. * If an external card is inserted and the option ONBOARD_VGA_IS_PRIMARY is not enabled, the internal GPU disappears completely from the PCI bus. Change-Id: I76aca2cfc4708c1728ae03ee4f6bc59d976c28a0 Signed-off-by: Nicola Corna <nicola@corna.info> Reviewed-on: https://review.coreboot.org/18564 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Rudolph <siro@das-labor.org>