summaryrefslogtreecommitdiff
path: root/src/mainboard/purism
AgeCommit message (Collapse)Author
2021-05-07skylake mainboards: Use enum values for SaGvAngel Pons
Replace `3` with `SaGv_Enabled`, which has the same value. Change-Id: I05cfddfefc45ba5bfb0e684445a6d8e02d7865e3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52098 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-04-21mb/purism/librem_14: Switch from S76 EC to Librem ECNicole Faerber
Change-Id: Ib2625754e7df818e8a6311e649bc357b2093acb4 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52392 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-04-18soc/intel/cnl and mainboards: Drop `cnl_configure_pads()`Furquan Shaikh
CB:31250 ("soc/intel/cannonlake: Configure GPIOs again after FSP-S is done") introduced a workaround in coreboot for `soc/intel/cannonlake` platforms to save and restore GPIO configuration performed by mainboard across call to FSP Silicon Init (FSP-S). This workaround was required because FSP-S was configuring GPIOs differently than mainboard resulting in boot and runtime issues because of misconfigured GPIOs. This issue has since been fixed in FSP (verified with FSP v1263 on hatch). However, there were still 4 boards in coreboot using `cnl_configure_pads()`. As part of RFC CB:50829, librem_cnl, clevo/cml-u and system76/lemp9 were tested to ensure that this workaround is no longer required. This change drops the workaround using `cnl_configure_pads()` and updates all mainboards to use `gpio_configure_pads()` instead. Signed-off-by: Furquan Shaikh <furquan@google.com> Tested-by: Angel Pons <th3fanbus@gmail.com> (Tested purism/librem_cnl) Tested-by: Michael Niewöhner <foss@mniewoehner.de> (Tested clevo/cml-u which is similar to system76/lemp9) Change-Id: I7a4facbf23fc81707cb111859600e641fde34fc4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52248 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-18mb/purism/librem_14: Update GPIO configMatt DeVillier
Update GPIO config based on review of latest schematics: - LAN/WLAN reset lines are NC - SDIO lines configured via GPP_G0-G7 - DMIC lines are wired directly to codec, not PCH, so GPP_D17-20 are set to NC - Pads GPP_H0-H3 are configured for I2S2 - Pads GPP_H7-H9 are straps for board revision, so treated as GPI - CPU_C10_GATE# is NC - PWRBTN# does not need an internal pull-up - GPP_C20-23 are configured for M.2 UART - SATAXPCIE1/2 and EC SCI/SMI lines do not need internal pull ups - GPP_C6/C7 set to I2C1 for future use - GPP_E15 changed from SCI to SMI, edge triggered Change-Id: If113cfeadf093e10dd84ab827ead594088f02ba1 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52389 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-18mb/purism/librem_14: Remove all PU/PD from NC GPIO padsMatt DeVillier
When a pad is configured as NC, it is set as a GPI with both TX and RX disabled, and as the pad is internally disconnected, no pull up or pull down is needed. Change-Id: Id551b8f6f5b8c772e17670b8b728b5e890ef0b21 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52388 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-12mb/*: drop LPC generic range for port 80Michael Niewöhner
Port 80 (actually 0x80-0x8f) is a fixed I/O range and thus does not have to be set up as generic range. Drop the entries from the devicetrees. Change-Id: I8a54d3c35a321a2d57bd846662f7339eff53e5a8 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52237 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-04-06mb/purism/librem_14: acpi: Remove unused EC defineTim Crawford
The define for color keyboard setting has never been used, as it was added as a Kconfig selection when ec/system76/ec was introduced. Change-Id: Iec9134e226382d32783342ef1d37c6f6f6caeb6e Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51946 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2021-03-28mb/purism/librem_14: Move/fix touchpad interrupt GPIOMatt DeVillier
On production boards, the touchpad interrupt line was moved from GPP_B20 to GPP_B3. Fix the GPIO pad config and devicetree entry, and update documentation to remove touchpad config issue. Change-Id: Iaefeba8f78c567b67e7a416c27299bff574c23ab Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51797 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-24mb/purism/librem_mini: Drop superfluous devices from devicetreeMatt DeVillier
The 'device pci 00.0 on end' entries are not necessary for socketed devices unless a chip driver needs to be bound to a device, so remove them from the devicetree. Also remove the `drivers/wifi/generic` chip driver as it was not necessary either. Change-Id: Id5f2e34d98b236f9cfac9f0afd8a8017e349603f Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51663 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-03-22purism/librem_14: add on-board LAN deviceMichael Niewöhner
On-board devices should be present in the devicetree, so that `.on_mainboard` field of `struct device` is `1`. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I3678514482724377bcdfcbdc7f2c5b312a48b2c6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2021-03-22lynxpoint/broadwell: Rename LP GPIO config globalAngel Pons
Do not use the same name as the non-LP GPIO config. This allows checking at build-time that a mainboard uses the correct GPIO config format. Without this commit, there are no build-time errors when using the wrong format of GPIO config, but there would be undefined behavior at runtime. Tested by trying to build asrock/b85m_pro4 and hp/folio_9480m after toggling the `INTEL_LYNXPOINT_LP` Kconfig option (and trimming down the USB config arrays for asrock/b85m_pro4). In both cases, building failed because the necessary GPIO config global is not defined, as expected. Change-Id: Ib06507ef8179da22bdb27593daf972e788051f3a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51661 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-20mb/purism/librem_cnl: Add new board/variant Librem 14Matt DeVillier
Add support for the CometLake-U based Librem 14 laptop. Change-Id: I24a2a92091cc272638ecaf8ea23a896cab8a7153 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51549 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-19mb/purism/librem_cnl: drop MAX_CPUS from KconfigMatt DeVillier
No need to restrict this further than the platform default, and will be problematic with the addition of the upcoming 6C/12T Librem 14 board. Change-Id: I1913992ec12578e1ad3bf6bf679d1a35a46d7370 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51548 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-03-03mb/purism/librem_mini: Implement `die_notify`Angel Pons
Make the SATA LED blink when coreboot dies. GPIO functions aren't compiled in for postcar, so add a check to prevent linker failures. TEST: Try to boot Librem Mini WHL without RAM, observe blinking (and also blinding LED). Re-install RAM (and re-seat RAM a few times), boot to OS, and observe SATA LED operating normally, as expected. Change-Id: I0ffac0ab02e52e9fbba7990f401d87e50a1b5154 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50013 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-17mb/purism/librem_mini: Enable DRAM Refresh2XMatt DeVillier
Enable Refresh2X to mitigate RAM corruption during long (> 1hr) periods of S3/suspend, which leads to failure to successfully resume from S3. Unknown if an issue with all DRAM types, but tested w/Kingston KVR24S17D8 16GiB DDR4 SODIMMs. Test: Build/boot Librem Mini v1/v2, put device in suspend, wait > 1hr, ensure resume from S3 successful 100% of the time. Change-Id: Ie8e3ebbb1ebdcd98813b5f36f580a235712d2f97 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50756 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-15device: Add unit to Kconfig option name: `PRE_GRAPHICS_DELAY_MS`Paul Menzel
It’s good practice to put the unit into the name. Change-Id: I1493f61d4e495c22f09abf1829bb2eab9b1fd2b6 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50517 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-02-15mb/purism/librem_bdw: Switch to Lynxpoint GPIO macrosAngel Pons
Prepare to unify Lynxpoint LP and Broadwell GPIO code. Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 remains identical. Change-Id: I573cd439e8284d84036e71615944f7a195155593 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50066 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-15soc/intel/broadwell/pch: Rename GPIO identifiersAngel Pons
Rename structs, types and functions to match Lynx Point's names. Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 remains identical. Change-Id: I11ea27b00b5820eb5553712e0420836470ec0d27 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50064 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-12mb/purism/librem_mini: move mainboard asl under variantMatt DeVillier
Upcoming librem_cnl variant(s) won't share mainboard asl. Change-Id: I9c2c43e5ae5efe161cc2135c920a1b9dee5a1317 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50499 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-04drivers/intel/fsp2_0: Fix running on x86_64Patrick Rudolph
Add new Kconfig symbols to mark FSP binary as x86_32. Fix the FSP headers and replace void pointers by fixed sized integers depending on the used mode to compile the FSP. This issue has been reported here: https://github.com/intel/FSP/issues/59 This is necessary to run on x86_64, as pointers have different size. Add preprocessor error to warn that x86_64 FSP isn't supported by the current code. Tested on Intel Skylake. FSP-M no longer returns the error "Invalid Parameter". Change-Id: I6015005c4ee3fc2f361985cf8cff896bcefd04fb Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48174 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-29mb/purism/librem_bdw: Turn comments into codeAngel Pons
Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 does not change. Change-Id: Iec84fc2b43c23ea85f5cf13d9f0bace73e448c97 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49285 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-01-27ACPI: Add top-level ASLKyösti Mälkki
Objects that are created with acpigen need to be declared with External () for the generation of dsdt.asl to pass iasl without errors. There are some objects that are common to all platforms, and some that should be declared only conditionally. Having a top-level ASL helps to achieve this. Change-Id: Ibaf1ab9941b82f99e5fa857c0c7e4b6192c74330 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49794 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-24broadwell: Flatten `mainboard_pre_raminit`Angel Pons
All Broadwell boards only use the `mainboard_pre_raminit` function to call `mainboard_fill_pei_data` and optionally `mainboard_fill_spd_data`. Move the declaration and weak definition of `mainboard_fill_spd_data` to platform code, replace the call to `mainboard_pre_raminit` in romstage.c with calls to `mainboard_fill_pei_data` and `mainboard_fill_spd_data`, and delete all other instances of `mainboard_pre_raminit` for Broadwell. Finally, delete now-empty romstage.c and spd.h files from mainboards. Change-Id: I3334b20bd7138bb753b996a137ff106e87c6e8a5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49776 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24broadwell: Clean up `mainboard_post_raminit`Angel Pons
Make it optional and change its signature. Change-Id: I4b5f3fb08e8954514ebf39e72c95aa62d66856d7 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24soc/intel/broadwell: Select CPU_INTEL_HASWELLAngel Pons
This allows us to drop many now-redundant Kconfig options. Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 remains identical. The default configuration file also remains identical, as expected. Change-Id: I20b0200550508679bf2533342ce918b221dcf81e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46953 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-01-24mb/purism/librem_bdw: Use Haswell CPU codeAngel Pons
Change-Id: I736bff90305952d279a10dfe90a2ee3a533220b5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46948 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-18mb/purism/librem_cnl: Update HDA verbs for Librem MiniMatt DeVillier
Disable all NIDs other than those for the front combo jack. Adjust attributes to match jack physical location, appearance, etc. Correct group number for verbs for HDMI output. Test: run hdajackretask, verify NID characteristics correct for each verb. Verify headphone detection and output functional. Change-Id: If9fca5d9795d56bd38c8ea47f8de985c14ac8fab Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49464 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10mb/x/acpi_tables: Rename to mainboard_fill_gnvs()Kyösti Mälkki
Rename acpi_create_gnvs() functions under mb/ to reflect their changed functionality. Remove now empty mb/acpi_tables.c files. Change-Id: Ia366867ef73d1ade9805dc29b8e14b3073f44f60 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48707 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-06soc/intel/broadwell: Move MAX_CPUS from mb to SoCFelix Singer
All Broadwell boards use 8 for MAX_CPUS, so this option can be factored out into SoC Kconfig. Change-Id: I311b95ea75a7c6b76b32c7197a0cec86db644234 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49122 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-06soc/intel/skylake: Move MAX_CPUS from mb to SoCFelix Singer
Configure MAX_CPUS in SoC Kconfig with 8 as default value and remove it from every mainboard where 8 is used. Change-Id: I825625bf842e8cd22dada9a508a7176e5cc2ea57 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49105 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-04mb/purism/librem_cnl: Fix HDA verb NID count for Librem MiniMatt DeVillier
Fix off-by-1 count of NID entries. Change-Id: I65f70d084022c99233144b460542a793eae2acf3 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49106 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-01nb/intel/hsw,soc/intel/{bdw,skl,apl},mb/*: unify dt panel settingsMichael Niewöhner
There are multiple different devicetree setting formats for graphics panel settings present in coreboot. Replace the ones for the platforms that already have (mostly) unified gma/graphics setup code by a unified struct in the gma driver. Hook it up in HSW, BDW, SKL, and APL and adapt the devicetrees accordingly. Always ensure that values don't overflow by applying appropriate masks. The remaining platforms implementing panel settings (GM45, i945, ILK and SNB) can be migrated later after unifying their gma/graphics setup code. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I445defe01d5fbf9a69cf05cf1b5bd6c7c2c1725e Reviewed-on: https://review.coreboot.org/c/coreboot/+/48885 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-01-01soc/intel/bdw,nb/intel/hsw: convert panel delays to ms representationMichael Niewöhner
For easier review of the switch to a new register struct in the follow-up change, the panel delay times get converted from destination register raw format to milliseconds representation in this change. Formula for conversion of power cycle delay: gpu_panel_power_cycle_delay_ms = (gpu_panel_power_cycle_delay - 1) * 100 Formula for all others: gpu_panel_power_X_delay_ms = gpu_panel_power_X_delay / 10 The register names gain a suffix `_ms` and calculation of the destination register raw values gets done in gma code now. Change-Id: Idf8e076dac2b3048a63a0109263a6e7899f07230 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48958 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-17soc/intel/cannonlake: Change mainboard_silicon_init_params argumentPatrick Rudolph
Use FSPS_UPD instead of FSP_S_CONFIG as argument as already done on xeon_sp and denverton_ns. This allows to set test config UPDs from mainboard code as well. Change-Id: I6d67264e22df32b9210ce88b99d6a7a4f6b97ffb Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48644 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2020-12-16mb/purism/librem_cnl: Use FMAP-based SPD cacheMatt DeVillier
Use a FMAP region to cache SPD data, providing improvements in boot time and detection of change in DIMM population (which FSP will sometimes fail to detect / fail to invalidate the MRC cache). Adapted from implementation used in google/hatch. Test: build/boot Librem Mini v2, verify SPD cache used, changes in DIMM population properly detected. Change-Id: I15cb9aa8b00d39d098a0f901aee026bac1161a80 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48549 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-15mb/purism/librem_mini: Adjust PL1/2 levelsMatt DeVillier
While the Librem Mini (v1/v2) are more than capable of higher PL1/2, they currently ship with a 40W power supply, so set PL1/2 accordingly to avoid power spikes above the PSU rating (which can result in unexpected showdowns/reboots) Change-Id: Ia7f89e885f1af29cbbb67d6fb844257ba2b87417 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48586 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-14soc/intel/skylake: Drop always-zero ProbelessTrace dt settingAngel Pons
This seems to be a debugging option. Since unset devicetree options default to zero, drop the setting. If it is needed in the future, a user-visible Kconfig option would probably make more sense. Change-Id: I0a71bc407fa92da3dcc0e3dbd666438d4280ffcb Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48576 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-12-14soc/intel/skylake: Drop unreferenced PttSwitch dt settingAngel Pons
The value for this setting is not used anywhere. Drop it. Change-Id: I75f6cdec6c69b374a07519bf9058b8f6e4916307 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48573 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-12-14mb/purism/librem_cnl: move setting of FSP-M UPDs into variant.cMatt DeVillier
The upcoming Librem 14 variant won't use the same SATA HSIO adjustments as the Librem Mini, so move these settings into a variant-specific file. Rename existing gpio.h to variant.h, move to board root directory, and use for all variant-specific declarations; adjust references as needed. Add newly-created variant.c to Makefile. Test: build/boot Librem Mini, verify SATA functionality unchanged. Change-Id: Ie8f714cc759675c692ad6e3f20e50adad8d09d4b Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48519 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-08mb/*: Remove SATA mode config for CNL based mainboardsFelix Singer
SATA_AHCI is already the default mode for CNL based mainboards. Therefore, remove its configuration from all related devicetrees. Built clevo/l140cu with BUILD_TIMELESS=1, coreboot.rom remains identical. Change-Id: I814e191243224a4b021cd7d4c1b611316f1fd1a4 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48391 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-08soc/intel/cannonlake: Align SATA mode names with soc/sklFelix Singer
Align the SATA mode names with soc/skl providing a consistent API. Built clevo/l140cu with BUILD_TIMELESS=1, coreboot.rom remains identical. Change-Id: I54b48462852d7fe0230dde0c272da3d12365d987 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48390 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-06mb/*: Remove unnecessary selectsFelix Singer
Remove SOC_INTEL_COMMON_BLOCK_HDA from mainboards Kconfig since it is selected by their SoC soc/intel/cannonlake. Change-Id: I9597746a217575b42f6325998b948e16b452231a Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48289 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13soc/intel/{skl,cnl}: replace PM ACPI timer dt option by KconfigMichael Niewöhner
Select `PM_ACPI_TIMER_OPTIONAL` to enable the new PM ACPI Kconfig and set the FSP option for PM ACPI timer enablement from its value instead of using the old devicetree option. Also drop the obsolete devicetree option from soc code and from the mainboards and add a corresponding Kconfig entry instead. Change-Id: I10724ccf1647594404cec15c2349ab05b6c9714f Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45955 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13broadwell: Flatten `acpi_init_gnvs` functionAngel Pons
Instead of relying on mainboards to call it, do like Lynx Point. Change-Id: Idb7457e0734e19d0a26f0762079e273b6e740475 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46793 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13broadwell: Factor out `acpi_fill_madt` functionAngel Pons
It is identical for all Broadwell mainboards, thus deduplicate it. Change-Id: I74559fbe42e44aa4d15ced5d88f6c15a1bf5203b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46792 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13soc/intel/broadwell/acpi: Rename `systemagent.asl`Angel Pons
Rename it to `hostbridge.asl`, which is what Haswell uses. Change-Id: I6f97fc5c9459fe6b66dcfcf51900c751beda0ebe Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46786 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-09mb/purism/librem_cnl: Add new variant 'Librem Mini v2'Matt DeVillier
Add Kconfig entries, and update existing documentation to accomodate both v1/v2 versions of the board. Change-Id: I856bb914941211cfbec4fed871ba2a5a038e23c3 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46984 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-09mb/purism/librem_mini: Fix USB_OC mapping in devicetreeMatt DeVillier
Correct USB over-current mappings in devicetree now that the GPIO config has been fixed per schematics. Change-Id: I564630231933c7c17a2c0a2a403fdcca9189b92e Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47222 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-11-09mb/purism/librem_mini: drop PcieRpSlotImplemented from LAN PCIeMatt DeVillier
The LAN NIC is onboard, not installed in a slot. Change-Id: I77ee7ee8c944b7942ca78d35cd881277c4030ab9 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47252 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-09mb/purism/librem_mini: Update smbios_slot_desc for M.2/WLANMatt DeVillier
Add strings for M.2 keying and number of PCIe lanes. Change-Id: I2e13749b50263ee5c2388a419bc8d784af6bd880 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47251 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-09mb/purism/librem_mini: Fix PCIe clock source mapping in devicetreeMatt DeVillier
Correct PCIe clock source mapping in devicetree now that the GPIO config has been fixed. Move ClkSrcUsage/ClkSrcClkReq registers under their associated PCIe root ports. Change-Id: Ibdaba51d971a39a6da6df82652b7420d7324dee5 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47221 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-11-09mb/purism/librem_mini: Adjust GPIO pad config per schematicsMatt DeVillier
- set pads GPP_B6/B8 for PCIe CLK_REQ lines - set pad GPP_B14 to speaker output - adjust comment for GPP_C22 / USB3_P1_PWREN - set pad GPP_E4 to NF1 / SATA_DEVSLP0 - set pads GPP_E9/E10 to USB2_OC0#/USB2_OC1# Change-Id: I8bf8af620370ec2d4c864e513db5d710a9c65d27 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47220 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-06mb/purism/librem_mini: Set unused GPIO pads to PAD_NCMatt DeVillier
Set numerous pads to PAD_NC as per board schematics (they are either NC, or connected to test pads), and adjust comments as needed. Change-Id: I4c2ab936256d0031d7a127fbeac42c8951a0b39f Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47191 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-11-05mb/purism/librem_mini: Drop DW0/DW1 from GPIO config commentsMatt DeVillier
These are generated by inteltool + intelp2m and reflect the pad configuration of the vendor (AMI) firmware at a specific point in time, but do not always reflect the correct configuration of a given pad as per the schematics, so drop them. Change-Id: Ie337cca5bc0e87a5426cceae8d7ec29ab14a1729 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47200 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04mb/purism/librem_cnl: Set SaGv to FixedHighAngel Pons
Since the Librem Mini does not run on battery power, SaGv has little benefits and noticeably slows down testing, since memory training is run twice. Disabling SaGv cuts the 30-second cold boot time in half. Change-Id: Ib02e42dcb4f20fdbdca85456c0dceafc59c782d8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47082 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2020-11-04mb/purism/librem_mini: Drop community comments in GPIO configMatt DeVillier
These add nothing useful to the GPIO config Change-Id: Ieecc9bd67d020e141c3a1f1d387034df5e563068 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47190 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04mb/purism/librem_mini: Update GPIO configMatt DeVillier
Update GPIO config using a fresh dump of inteltool from the vendor (AMI) firmware on a Librem Mini v2, run through intelp2m with parameters '-p cnl -n -ii' Change-Id: I747415fb9ab7b21943d256d248729cb9e2b4b945 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47206 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04mb/purism_librem_mini: Add child device, slot descriptions to PCIe RPsMatt DeVillier
Change-Id: Id306100fc691dcbde48b65092d0be9d7e73c0722 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47189 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04mb/purism/librem_mini: Reorganize devicetreeMatt DeVillier
Move registers under devices to which they belong. Change-Id: I61ca7c1db02646252d7421f8b79dfc8a40b2bdb5 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47188 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04mb/purism/librem_mini: drop unused HeciEnabled registerMatt DeVillier
this should have been corrected as part of: commit 3de90d1 [soc/intel/cnl: Set Heci1Disable depending on devicetree config] Change-Id: I6a103a1de01fc258ef359258a8a64f4c5a181139 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47187 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04mb/purism/librem_mini: Increase TDP/PL2 settingMatt DeVillier
PL2 was set artificially low during development when the active cooling fan was not functional, and never corrected once the fan was fixed. Raise PL2 to a value which works with both Librem Mini variants. Change-Id: Ie377392020f73359aed80ddae727adb6f8d06344 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47186 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-11-04mb/purism/librem_mini: Drop devicetree settings which default to 0Matt DeVillier
All chip registers default to 0, no need to explicitly set them. Change-Id: I056121170d22393484b0ee79bd0815452161a900 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47185 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-11-04mb/purism/librem_mini: drop SendVrMbxCmd from devicetreeMatt DeVillier
Not needed for this board. Change-Id: I15a68b59bc512e571b9590007ea64561b3f3dae1 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47184 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-11-03soc/intel/broadwell: Relocate PCH ACPI filesAngel Pons
Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 remains identical. Change-Id: I7f87085c70149d02c544e2d43e1bdb58c7502d6d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46754 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-03mb/purism/librem_cnl: Adjust in preparation for new variantsMatt DeVillier
- Move the SoC select to board config (vs baseboard config) - Qualify the VGA PCI ID and CBFS size values based on board selection - Move devicetree to variant dir and add Kconfig entry - Use a separate board_info.txt for the baseboard and each variant Change-Id: I4764f2c1243ea49bd08e0735865cc3cb7a66441f Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47051 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-11-03mb/purism/librem_whl: rename to librem_cnlMatt DeVillier
Since Whiskeylake SoC code is actually a subset of soc/intel/cannonlake, rename the baseboard so that boards using other 'cannonlake family' SoCs (e.g., Cometlake) can be added with minimal confusion. Rename the mainboard dir and baseboard name, and adjust any references to them. Change-Id: I2af7977f1622070eb8bf8449bc8306f9d75b9851 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47050 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-30soc/intel/broadwell: Separate PCH in devicetreeAngel Pons
Flesh out the PCH configuration into a separate chip. Keep it within the Broadwell SoC directory for now, to ease moving files around. The boards were prepared beforehand and the devicetrees require next to no changes. Tested on out-of-tree Acer Aspire E5-573, still boots. Change-Id: I28d948f3e6d85e669d12b29516d867c1d1ae9e1a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46700 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-30mb/purism/librem_bdw: Prepare devicetree for PCH splitAngel Pons
Tested with BUILD_TIMELESS=1, all variants remain identical. Change-Id: I0fe6de35f7471ce173df40db1444153623544f00 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46705 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-26mb/*,soc/intel: drop the obsolete dt option `speed_shift_enable`Michael Niewöhner
The dt option `speed_shift_enable` is obsolete now. Drop it. Change-Id: I5ac3b8efe37aedd442962234478fcdce675bf105 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46462 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-10-21soc/intel,mb/*: get rid of legacy pad macrosMichael Niewöhner
Get rid of legacy pad macros by replacing them with their newer equivalents. TEST: TIMELESS-built board images match Change-Id: I078f9bb3c78f642afc6dcfd64d77be823a4485c2 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46567 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-19mb/purism/librem_skl: Clean up FSP-M RCOMP settingsAngel Pons
There's no need to use static functions to fill these settings in. Also, add missing include for <stdint.h> and initialize `mem_cfg` in one line. Change-Id: I82b0997846d4ec40cf9b1a8ebfb1e881b194e078 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46252 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-14mb/purism/librem_skl: Drop DQ and DQS byte mapsAngel Pons
These settings are not necessary for DDR4 and can be dropped. Change-Id: I1946be239f0c90db995a60570474039cef45cfa9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46251 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-10-13{src/mb,util/autoport}: Use macro for DSDT revisionElyes HAOUAS
Change-Id: I5a5f4e7067948c5cc7a715a08f7a5a3e9b391191 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45904 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-10-05soc/intel/common/block/acpi: Factor out common platform.aslSubrata Banik
This patch moves platform.asl into common block acpi directory to avoid duplicating the same ASL code block across SoC directory. TEST=Able to build and boot TGL, CNL and CML platform. 1) Dump and disassemble DSDT, verify _PIC method present inside common platform.asl is still there. 2) Verify no ACPI error seen while running 'dmesg` from console. Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I5189b03d6abfaec39882d28b40a9bfa002128be3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45982 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-28mb/purism/librem_whl: Drop 3Gbps SATA limit; enable and set SATA tuning paramsMatt DeVillier
Some Librem Minis exhibit issues with 6Gbps SATA operation on certain SSDs, setting the Receiver Equalization Boost Magnitude adjustment resolves this, so limiting SATA speeds to 3Gbps is no longer needed. Test: build/boot Librem Mini with Crucial SATA SSD, observe no issues booting, no ATA-related errors in dmesg on PureOS 10 / kernel 5.8.7 Change-Id: I8b3cbcff7f181bcab35d71e859033578c822bb20 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45696 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-28mb/purism/librem_skl: Enable and set SATA tuning paramsMatt DeVillier
Some Librems have issues with 6Gbps SATA operation on certain SSDs, setting the Receiver Equalization Boost Magnitude adjustment resolves this. Test: build/boot Librem 15v3 with Crucial SATA SSD, observe no issues booting, no ATA-related errors in dmesg on PureOS 10 / kernel 5.8.7 Change-Id: I078deeff7fc54694393b5b16c41c5d622b332781 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45695 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-08soc/intel/broadwell: Drop `gpu_panel_port_select`Angel Pons
The corresponding bits in PP_ON_DELAYS are reserved MBZ. Change-Id: I9789a7d50c4bce2ccad0bf476f877db25e3ff82e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45033 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-09-06mb/*: devicetree: drop now unneeded USBx_PORT_EMPTYMichael Niewöhner
Setting USBx_PORT_EMPTY is not a requirement anymore, since unset devicetree settings default to 0 and the OC pin now only gets set when the USB port is enabled (see CB:45112). Thus, drop the setting from all devicetrees. Change-Id: I899349c49fa7de1c1acdca24994ebe65c01d80c6 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2020-09-04soc/intel/cnl: Enable HECI3 depending on devicetreeFelix Singer
Currently HECI3 gets enabled by the option Heci3Enabled, but this duplicates the devicetree on/off options. Therefore depend on the devicetree for enablement of the HECI3 controller. All corresponding mainboards were checked if the devicetree configuration matches the Heci3Enabled setting, and divergent devicetrees were adjusted. Change-Id: Ic7d52096aee225c2ced1e1bc29ca850fe5073edc Signed-off-by: Felix Singer <felix.singer@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44579 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-23soc/intel/cnl: Configure FSP option PcieRpSlotImplementedNico Huber
Allow configuring FSP option PcieRpSlotImplemented. Also, update all related devicetrees and configure PcieRpSlotImplemented to keep the current behaviour. Change-Id: I6c57ab0ae50a37cd9a90786134e9056851a86a3c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Felix Singer <felix.singer@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39986 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-08-21mb/purism/librem_whl: Convert GPIOs to macrosMatt DeVillier
Convert raw GPIOs to coreboot macros using newly-added support for Cannon/Whiskey/Coffee/Cometlake SoCs to intelp2m Test: build/boot Librem Mini, no smoke released. Change-Id: I6ac747ad4e650c24d2b7e34228ff74140c51a0c1 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44503 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-08-18mb/purism/librem_whl: Add new board Librem Mini (WHL-U)Matt DeVillier
Add new librem_whl baseboard and Librem Mini variant. Tested with SeaBIOS, Tianocore, and Heads payloads. All functions working normally except SATA, which is limited via a FSP UPD to 3Gbps until the correct HSIO PHY settings can be determined. https://puri.sm/products/librem-mini/ Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: I36af42766f85eb17f86f6ec9b48b87125fb911e6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-08soc/intel/skylake: Enable CIO depending on devicetree configurationFelix Singer
Currently, CIO gets enabled by the option Cio2Enable, but this duplicates the devicetree on/off options. Therefore, depend on the devicetree for the enablement of the CIO controller. All corresponding mainboards were checked if the devicetree configuration matches the Cio2Enable setting, and missing entries were added. Change-Id: I65e2cceb65add66e3cb3de7071b1a3cc967ab291 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44032 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-08soc/intel/skylake: Enable SDXC depending on devicetree configurationFelix Singer
Currently, SDXC gets enabled by the option ScsSdCardEnabled, but this duplicates the devicetree on/off options. Therefore, depend on the devicetree for the enablement of the SDXC controller. All corresponding mainboards were checked if the devicetree configuration matches the ScsSdCardEnabled setting, and missing entries were added. Change-Id: I298b7d0b0fe2a7346dbadcea4be22dc67fce4de8 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44028 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-08-07soc/intel/skylake: Enable thermal subsystem depending on devicetreeFelix Singer
Currently SA thermal subsystem gets enabled by the option Device4Enable, but this duplicates the devicetree on/off options. Therefore depend on the devicetree for enablement of the SA thermal subsystem controller. All corresponding mainboards were checked if the devicetree configuration matches the Device4Enable setting, and missing entries were added. Change-Id: I7553716d52743c3e8d82891b2de14c52c6d8ef16 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44026 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-29soc/intel/skylake: Enable HDA depending on devicetree configurationFelix Singer
Currently HDA gets enabled by the option EnableAzalia, but this duplicates the devicetree on/off options. Therefore use the on/off options for the enablement of the HDA controller. I checked all corresponding mainboards if the devicetree configuration matches the EnableAzalia setting. Change-Id: Id20d023b2f286753fb223050292c7514632e1dd3 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43866 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-29soc/intel/skylake: Enable eMMC depending on devicetree configurationFelix Singer
Currently eMMC gets enabled by the option ScsEmmcEnabled, but this duplicates the devicetree on/off options. Therefore use the on/off options for the enablement of the eMMC controller. I checked all corresponding mainboards if the devicetree configuration matches the ScsEmmcEnabled setting. Change-Id: I3b86ff6e2f15991fb304b71d90c1b959cb6fcf43 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-07-29soc/intel/skylake: Enable TraceHub depending on devicetree configurationFelix Singer
Currently TraceHub gets enabled by the option EnableTraceHub, but this duplicates the devicetree on/off options. Therefore use the on/off options for the enablement of the TraceHub controller. I checked all corresponding mainboards if the devicetree configuration matches the EnableTraceHub setting. Change-Id: Idcd1e5035bc66c48620e4033d8b4988428e63db9 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43847 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-29soc/intel/skylake: Enable SMBus depending on devicetree configurationFelix Singer
Currently SMBus gets enabled by the option SmbusEnable, but this duplicates the devicetree on/off options. Therefore use the on/off options for the enablement of the SMBus controller. I checked all corresponding mainboards if the devicetree configuration matches the SmbusEnable setting. Change-Id: I0d9ec1888c82cc6d5ef86d0694269c885ba62c41 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-07-29soc/intel/skylake: Enable LAN depending on devicetree configurationFelix Singer
Currently LAN gets enabled by the option EnableLan, but this duplicates the devicetree on/off options. Therefore use the on/off options for the enablement of the LAN controller. I checked all corresponding mainboards if the devicetree configuration matches the EnableLan setting. Change-Id: I36347e8e0f0ddba47aec52aeb6bc047e3c8bfaa4 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43844 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-07-29soc/intel/skylake: Enable SATA depending on devicetree configurationFelix Singer
Currently SATA gets enabled by the option EnableSata, but this duplicates the devicetree on/off options. Therefore use the on/off options for the enablement of the SATA controller. I checked all corresponding mainboards if the devicetree configuration matches the EnableSata setting. Change-Id: I217dcb7178f29bbdeada54bdb774166126b47a5a Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43843 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-07-26mb/purism/librem_skl: Disable CLKREQ for NVMeMatt DeVillier
This effectively reverts commit 5086ccef (mb/purism/librem_skl: Fix CLKREQ for 15v3 NVMe). Some Librem 15v3/v4 boards are showing issues with NVMe detection or booting via SeaBIOS, so revert this until a proper fix can be found. Test: build / successfully boot Librem 15v4 with problematic NVMe drive. Change-Id: I0659f77bbe693f3d3b192a28ff3ef013658930cc Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43490 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26skylake boards: Factor out copy-pasted PIRQ routesAngel Pons
Put them in common code just in case something depends on the values. Change-Id: Ief526efcbd5ba5546572da1bc6bb6d86729f4e54 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43851 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-30ACPI: Drop typedef global_nvs_tKyösti Mälkki
Bring all GNVS related initialisation function to global scope to force identical signatures. Followup work is likely to remove some as duplicates. Change-Id: Id4299c41d79c228f3d35bc7cb9bf427ce1e82ba1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42489 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-19Kconfig: Escape variable to accommodate new Kconfig versionsPatrick Georgi
Kconfig 4.17 started using the $(..) syntax for environment variable expansion while we want to keep expansion to the build system. Older Kconfig versions (like ours) simply drop the escapes, not changing the behavior. While we could let Kconfig expand some of the variables, that only splits the handling in two places, making debugging harder and potentially messing with reproducible builds (e.g. when paths end up in configs), so escape them all. Change-Id: Ibc4087fdd76089352bd8dd0edb1351ec79ea4faa Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42481 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
2020-06-07soc/intel/baytrail,braswell,broadwell,quark: Select COMMON_FADTKyösti Mälkki
Some of the boards do not select SYSTEM_TYPE_LAPTOP or _CONVERTIBLE so their FADT preffered_pm_profile would change from PM_MOBILE without the added overrides here. Change-Id: I04b602b2c23fbd163fcd110a44ad25c6be07ab66 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41920 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-07mb,soc/intel: Rename acpi_fill_in_fadt() to acpi_fill_fadt()Kyösti Mälkki
Change-Id: I9025ca3b6b438e5f9a790076fc84460342362fc2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41919 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-02mb/purism/librem*: drop EC chip deviceMatt DeVillier
CB:35086 exposed that the devicetree listed an EC chip for which there is no actual driver; the EC is entirely ACPI code (.asl) included by the board's ec.asl. Remove the unnecessary EC chip driver from both boards, as well as the unnecessary Kconfig selection for librem_bdw. Test: build/boot Librem 13v1, 13v4, verify battery info etc still correct. Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: I5cb0b51881ab8f14e9ec693485f673f4284b5f14 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41788 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-20mb/purism/librem_skl: select GFX_GMA_IGNORE_PRESENCE_STRAPSMatt DeVillier
Some Librem 13v4's don't have the presence straps connected, leading libgfxinit to fail to init the internal display. Select GFX_GMA_IGNORE_PRESENCE_STRAPS since all SKL/KBL Librems have an internal display so there's no adverse effect. Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: Ib9d281b7d495c4f9a5c6fc5fdb8042b0fcbda745 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41417 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18skylake: update processor power limits configurationSumeet R Pawnikar
Update processor power limit configuration parameters based on common code base support for Intel Skylake SoC based platforms. BRANCH=None BUG=None TEST=Built and tested on nami system Change-Id: Idc82f3d2f805b92fb3005d2f49098e55cb142e45 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41238 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 20:44:15 +0000