summaryrefslogtreecommitdiff
path: root/src/mainboard/pcengines
AgeCommit message (Collapse)Author
2015-03-07AGESA: Use same HeapManager for all BiosCallOutsKyösti Mälkki
We do not allow platforms to mess around with memory layout. Change-Id: I316ff522c8833fa3b7ad20f2c5a9cae21f4174d8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8604 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-23pcengines/apu1: Fix 0:15.x PCIe root portsKyösti Mälkki
Change gpp_configuration to GPP_CFGMODE_X1111 (was X4000), this is done to only advertise x1 lane width for PCIe link 0:15.0. Hide functions of PCIe links that have no slots connected. Our PCI infrastructure does not support bridge devices that are set off in devicetree but remain visible in the PCI hardware tree. Change-Id: If90919634995076ab0f029baece3ba9cb8f3f3b2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8388 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-23pcengines/apu1: Fix and clean up devicetreeKyösti Mälkki
Remove functions 0:12.1 and 0:13.1 that do not exist in the hardware. Disable 0:14.1 IDE controller, as it would only be used with SATA ports 4 and 5 that are not populated with connectors in the hardware. Disable 0:14.2 HD audio, as it is not implemented in the hardware Disable 0:14.5 OHCI controller, as ports behind this USB1.1 -only controller are not populated in the hardware. Fix some alignment and whitespace. To my knowledge these changes are not included with SAGE release pcengines.apu_139_osp.tar.gz, but that tarball does not contain either devicetree.cb or a pre-compiled static.c file so I cannot tell for sure. Change-Id: Idcb8e76645fce7e89a37ff7007531b668f472131 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8328 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-23pcengines/apu1: Fix PCI device 16 interruptsKyösti Mälkki
Interrupts from USB controllers 0:16.0 and 0:16.2 were not routed in PIC mode. The only affected peripheral was the SD card reader. This patch is not included with SAGE release pcengines.apu_139_osp.tar.gz. Change-Id: Ie7f0fa3751b46cca0132bd6dcada3628c6a45efb Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8327 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2015-02-23pcengines/apu1: Implement board GPIOsKyösti Mälkki
Some GPIO pins are shared with (disabled) PCI bridge 0:14.4. As our PCI subsystem currently does not configure PCI bridges that are marked disabled, but remain visible in the hardware, we cannot mark 0:14.4 disabled in devicetree just yet. Change-Id: Ibc5d950662d633a07d62fd5a5984a56d8e5f959d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8326 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-23pcengines/apu1: New board PC Engines APU1Kyösti Mälkki
While we cannot recreate exact copies of PC Engines APU1 firmware images, I shall upstream the vital changes for coreboot from the following tarballs SAGE has published to meet GPL: SageBios_PCEngines_APU_sources_for_publishing_20140405_GPL_package.tar.gz md5sum: ce5f54723e4fe3b63a1a3e35586728d4 pcengines.apu_139_osp.tar.gz md5sum: af6c8ab3b85d1a5a9fbeb41efa30a1ef The patch here adds Kconfig, Makefile.inc and devicetree.cb files to match 2014/04/05 release tarball config.h and static.c files. Change-Id: Id61270b4d484f712a5c0e780a01fc81f1550b9ad Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8325 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-23pcengines/apu1: Fork of amd/persimmonKyösti Mälkki
Drop persimmon customization for superio, azalia, PCI-e reset etc. Change-Id: I35f49ca67e6cc2df826f24e5a4bb3db5bb6f711e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8324 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-16mainboard/cmos: Kill off unused boot_* parametersTimothy Pearson
Change-Id: I19d6b56e3ac5e6e7946648b97c86a223b748e3bd Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8460 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-16mainboard/cmos: Move ECC variables out of fallback mechanism byteTimothy Pearson
Change-Id: Icebc12d8f83494150a7bdd3adcc168d7b48b2e68 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8458 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-16mainboard/cmos: Delete obsolete commented parametersTimothy Pearson
Change-Id: Iccad79c142a7fcf89dd0fbebe8c07ad9ef019e91 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8459 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2015-01-06mainboard: Drop print_ implementation from non-romcc boardsStefan Reinauer
Because we had no stack on romcc boards, we had a separate, not as powerful clone of printk: print_*. Back in the day, like more than half a decade ago, we migrated a lot of boards to printk, but we never cleaned up the existing code to be consistent. instead, we worked around the problem with a very messy console.h (nowadays the mess is hidden in romstage_console.c and early_print.h) This patch cleans up the mainboard code to use printk() on all non-ROMCC boards. Change-Id: I2383f24343fc2041fef4af65d717d754ad58425e Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/8111 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2015-01-06mainboard/*/romstage.c: Sanitize system header inclusionsEdward O'Callaghan
Fix system include paths to be consistent. Chipset support is part of the Coreboot 'system' and hence 'non-local' (i.e., in the same directory or context). One possible product of this, is to perhaps allow future work to do pre-compiled headers (PCH) on the buildbot for faster build times. However, this currently just makes mainboard's consistent. Change-Id: I2f3fd8a3d7864926461c960ca619bff635d7dea5 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/8085 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-12-02Replace hlt with halt()Patrick Georgi
There were instances of unneeded arch/hlt.h includes, various hlt() calls that weren't supposed to exit (but might have) and various forms of endless loops around hlt() calls. All these are sorted out now: unnecessary includes are dropped, hlt() is uniformly replaced with halt() (except in assembly, obviously). Change-Id: I3d38fed6e8d67a28fdeb17be803d8c4b62d383c5 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/7608 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-08-15intel/cpu: rename car.h to romstage.hAaron Durbin
This header has nothing to do with cache-as-ram. Therefore, 'car' is the wrong term to use. It is about providing a prototype for *romstage*. Change-Id: Ibc5bc6f3c38e74d6337c12f246846853ceae4743 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/6661 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-08-14Intel: Add common header file for CAR setupEdward O'Callaghan
When passing '-ffreestanding' the 'main' romstage.c may no longer necessarily be considered the entry point. From the C specification in 5.1.2.1 Freestanding environment; "In a freestanding environment (in which C program execution may take place without any benefit of an operating system), the name and type of the function called at program startup are implementation-defined." Clang complains about these being missing as Clang is somewhat more strict about the spec than GNU/GCC is. An advantage here is that a different entry-point type-signature shall now be warned about at compile time. Change-Id: I467001adabd47958c30c9a15e3248e42ed1151f3 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5872 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-18mainboard: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
Change-Id: If29a70be4fb56ebb0dbf6d510412cbe2f34480ef Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6291 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-07-08mainboard: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
Change-Id: I05d6d22664155ac8478e665733f816776e277c22 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6200 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-31superio/winbond/w83627hf: Avoid .c includes in mainboardsEdward O'Callaghan
Move towards the removal of the superio model specific xxx_serial_enable implementation. Make remaining superio romstage parts link-time symbols and fix corresponding mainboards to match. The following mainboards remain unconverted as they are ROMCC: - mainboard/supermicro/x6dai_g - mainboard/supermicro/x6dhe_g - mainboard/supermicro/x6dhr_ig - mainboard/supermicro/x6dhr_ig2 and so block the final removal of w83627hf_serial_enable(). Special cases: - mainboard/supermicro/h8qme_fam10: Provide local pnp_ sio func Provide local superio pnp_ programming entry/exit functions as to avoid making superio implementation global symbols. Although this is not the proper/final solution, it does mitigate possible symbol collisions and allow for continued superio refactorisation. Change-Id: Iaefb25d77512503050cb38313ca90855ebb538ad Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5601 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-03Move ARCH_* from board/Kconfig to cpu or soc Kconfig.Furquan Shaikh
CONFIG_ARCH is a property of the cpu or soc rather than a property of the board. Hence, move ARCH_* from every single board to respective cpu or soc Kconfigs. Also update abuild to ignore ARCH_ from mainboards. Change-Id: I6ec1206de5a20601c32d001a384a47f46e6ce479 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5570 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-28AMD: Add common header file for CAR setupKyösti Mälkki
Change-Id: I24b2cbd671ac3a463562d284f06258140a019a37 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4683 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-02-04pcengines/alix2c: Add ALIX.2C as a clone of ALIX.2D.Vladimir Serbinenko
According to vendor (Pascal Dornier) they're the same from coreboot perspective. Change-Id: I43aeb77f21c251b3d9c5c2dcfa01d4d1de0bc87b Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5114 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-02-01pcengines/alix6: Make clone declaration in line with other clones.Vladimir Serbinenko
Change-Id: I4e56f6b37314bff569728b732b4115fb940f70dd Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4756 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-01-19board-status: Add board_info.txt extracted from wiki.Vladimir Serbinenko
board_info.txt is a file to be used by board-status to add some useful info to the generated table like flash chip type. This series is autogenerated from wiki page Supported_Motherboards. Change-Id: Ie2bda900713ef4883134477163320936c84c34f5 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4701 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-06-04PC Engines ALIX.1C: Add CMOS defaults.Denis 'GNUtoo' Carikli
After Booting the BIOS, flashing coreboot and booting coreboot with that patch we have: # ./nvramtool -a boot_option = Fallback last_boot = Fallback ECC_memory = Disable baud_rate = 115200 power_on_after_fail = Disable debug_level = Spew boot_first = HDD boot_second = Fallback_Floppy boot_third = Fallback_Network boot_index = 0xf boot_countdown = 0x7f nvramtool: Warning: Coreboot CMOS checksum is bad. Change-Id: Ia87b09003d859f6dee7c09aa963df002c1d02688 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3323 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-06-04AMD Northbridge LX: get rid of #include "northbridge/amd/lx/raminit.c"Christian Gmeiner
Change-Id: I249c63646267ebe8dd8e06980aa6367a16fe7297 Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-on: http://review.coreboot.org/3370 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-04AMD Northbridge LX: convert spd_read_byte() to non-static versionChristian Gmeiner
Change-Id: Ie329606852dfd7109acb694e9a9ff851b023cc63 Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-on: http://review.coreboot.org/3369 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-04AMD Northbridge LX: move #include "northbridge/amd/lx/raminit.h"Christian Gmeiner
Move the include before static inline int spd_read_byte(). Change-Id: I4cac4b1f55368041b067422d95c09208e15d0f2d Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-on: http://review.coreboot.org/3368 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-12Revert "PC Engines ALIX.1C: Add CMOS defaults."Peter Stuge
Revert commit f90071faeee3358748d0c8d31e46721b53241e28 [1] as it was merged without its dependencies and therefore the source tree currently does not build [2][3]. OPTION option_table.h GEN build.h SCONFIG mainboard/pcengines/alix1c/devicetree.cb CC arch/x86/lib/cbfs_and_run.romstage.o CC arch/x86/lib/memcpy.romstage.o CC arch/x86/lib/memset.romstage.o CC arch/x86/lib/rom_media.romstage.o CC arch/x86/lib/romstage_console.romstage.o CC console/die.romstage.o CC console/post.romstage.o CC console/vtxprintf.romstage.o CC device/device_romstage.romstage.o CC lib/cbfs.romstage.o CC lib/compute_ip_checksum.romstage.o CC lib/gcc.romstage.o CC lib/lzma.romstage.o CC lib/memchr.romstage.o CC lib/memcmp.romstage.o CC lib/memmove.romstage.o CC lib/ramtest.romstage.o CC lib/uart8250.romstage.o CC southbridge/amd/cs5536/smbus.romstage.o ROMCC generated/bootblock.inc GEN generated/bootblock.ld make: *** No rule to make target `nvramtool', needed by `coreboot-builds/pcengines_alix1c/coreboot.pre1'. Stop. make: *** Waiting for unfinished jobs.... OPTION cmos_layout.bin [1] http://review.coreboot.org/#/c/3229/ [2] http://www.coreboot.org/pipermail/coreboot/2013-May/075864.html [3] http://qa.coreboot.org/job/coreboot-gerrit/6251/testReport/junit/(root)/board/i386_pcengines_alix1c/ Change-Id: I4764d90c39ccdb4dc7e7a9aef7525c306614e1a8 Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://review.coreboot.org/3245 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-05-11PC Engines ALIX.1C: Add CMOS defaults.Denis 'GNUtoo' Carikli
After removing power and the CMOS Battery, putting it back and booting coreboot we have: # ./nvramtool -a boot_option = Fallback last_boot = Fallback ECC_memory = Disable baud_rate = 115200 power_on_after_fail = Disable debug_level = Spew boot_first = HDD boot_second = Fallback_Floppy boot_third = Fallback_Network boot_index = 0xf boot_countdown = 0x7f nvramtool: Warning: Coreboot CMOS checksum is bad. Change-Id: Iba2701d4611cd2c2e5a2d76d41ffc23ed65574e8 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3229 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-22x86: Unify arch/io.h and arch/romcc_io.hStefan Reinauer
Here's the great news: From now on you don't have to worry about hitting the right io.h include anymore. Just forget about romcc_io.h and use io.h instead. This cleanup has a number of advantages, like you don't have to guard device/ includes for SMM and pre RAM anymore. This allows to get rid of a number of ifdefs and will generally make the code more readable and understandable. Potentially in the future some of the code in the io.h __PRE_RAM__ path should move to device.h or other device/ includes instead, but that's another incremental change. Change-Id: I356f06110e2e355e9a5b4b08c132591f36fec7d9 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2872 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-01GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«Paul Menzel
In the file `COPYING` in the coreboot repository and upstream [1] just one space is used. The following command was used to convert all files. $ git grep -l 'MA 02' | xargs sed -i 's/MA 02/MA 02/' [1] http://www.gnu.org/licenses/gpl-2.0.txt Change-Id: Ic956dab2820a9e2ccb7841cab66966ba168f305f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2490 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-02-25mainboard.c: Name enable_dev function uniformly `mainboard_enable`Paul Menzel
To reduce the differences between these file name the enabling device function in the directory `src/mainboard` uniformly `mainboard_enable` [1]. Thanks to the awesome help of gnomon and BlastHardcheese in the IRC channel #sed on <irc.freenode.net>. gnomon came up with the following command to do the actual work. $ cd src/mainboard $ for f in */*/mainboard.c ; \ > do src="$(awk '/\.enable_dev = /{v=$NF; sub(/,$/,"",v); print v}' "$f")" ; \ > [[ -z $src ]] && continue ; \ > printf '%s\n' "g/${src}/s/${src}\([,(]\)/mainboard_enable\1/p" w | ed -s "$f" ; \ > done `src/mainboard/digitallogic/msm586seg/mainboard.c` and `src/mainboard/technologic/ts5300/mainboard.c` had to be adapted manually as no comma was used separating the struct members. And with the following statement, gnomon is even more likable! My pleasure entirely. Good luck with coreboot; I'm a big fan of the project. [1] http://www.coreboot.org/pipermail/coreboot/2013-February/074548.html Change-Id: Ife9cd0c2d9cc1ed14afc6d40063450553f06a6c6 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2493 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-14sconfig: rename lapic_cluster -> cpu_clusterStefan Reinauer
The name lapic_cluster is a bit misleading, since the construct is not local APIC specific by concept. As implementations and hardware change, be more generic about our naming. This will allow us to support non-x86 systems without adding new keywords. Change-Id: Icd7f5fcf6f54d242eabb5e14ee151eec8d6cceb1 Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2377 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-14sconfig: rename pci_domain -> domainStefan Reinauer
The name pci_domain was a bit misleading, since the construct is only PCI specific in a particular (northbridge/cpu) implementation, but not by concept. As implementations and hardware change, be more generic about our naming. This will allow us to support non-PCI systems without adding new keywords. Change-Id: Ide885a1d5e15d37560c79b936a39252150560e85 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2376 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-16Fix PIRQ routing abstractionStefan Reinauer
intel_irq_routing_table is a local structure that should not be used globally, because it might not be there on all mainboards. Instead, the API has to be corrected to allow passing a PIRQ table in where needed. Change-Id: Icf08928b67727a366639b648bf6aac8e1a87e765 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1862 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-06Drop redundant CHIP_NAME in mainboard.cKyösti Mälkki
Compose the name from Kconfig strings instead. As the field is for debug print use only, a minor change in the output should do no harm. The strings no longer include word "Mainboard". Change-Id: Ifd24f408271eb5a5d1a08a317512ef00cb537ee2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1635 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-07-26Drop mainboard chip.hStefan Reinauer
mainboard_config never worked right, at least not since we've had sconfig. Hence, drop mainboard/<vendor>/<device>/chip.h and fix up the mainboards that tried to use it anyways. Change-Id: I7cd403ea188d8a9fd4c1ad15479fa88e02ab8e83 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1359 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-26amd/lx: Move configuration from source to KconfigPatrick Georgi
LX has two values that are usually automatically derived but can be overridden, that were so far defined in each board's romstage. These values, along with the toggle to enable override are now part of LX's Kconfig. For boards that gave values but requested autogeneration, the values are removed. Further improvements: Figure out the various fields in PLLMSRlo and make them sensible Kconfig options (instead of the hex value it is now) Change-Id: I8a17c89e4a3cb1b52aaceef645955ab7817b482d Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1227 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-04-23alix2: add support for alix6Philip Prindeville
The Alix6 is very similar to the alix2, differing in having 1 mini-PCIe slot (USB 2.0 only), an RFKILL GPIO line going to that slot, and 1 or 2 SIM sockets. Change-Id: I19e4e756966e60bb0310c19286654d3d579b8850 Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> Reviewed-on: http://review.coreboot.org/521 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-13AMD Geode cpus: apply un-written naming rulesKyösti Mälkki
Kconfig directives to select chip drivers for compile literally match the chip directory names capitalized and underscored. Rename directories and Kconfig as follows: model_lx -> geode_lx model_gx1 -> geode_gx1 model_gx2 -> geode_gx2 Change-Id: Ib8bf1e758b88f9efed1cf8b11c76b796388e7147 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/613 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-01-30pcengines: align VENDOR_ and BOARD_ names for PC enginesPhilip Prindeville
Coming changes to abuild require that VENDOR_ and BOARD_ names have common suffixes. Change-Id: I44cf759dd3b2d02c525eb325dc9c5c989f172ac5 Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> Reviewed-on: http://review.coreboot.org/548 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-04-20run uart_init() from console_init, just like the other console ↵Stefan Reinauer
initialization functions. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6531 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-11Unify use of post_codeAlexandru Gagniuc
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6487 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-08second round name simplification. drop the <component>_ prefix.stepan
the prefix was introduced in the early v2 tree many years ago because our old build system "newconfig" could not handle two files with the same name in different paths like /path/to/usb.c and /another/path/to/usb.c correctly. Only one of the files would end up being compiled into the final image. Since Kconfig (actually since shortly before we switched to Kconfig) we don't suffer from that problem anymore. So we could drop the sb700_ prefix from all those filenames (or, the <componentname>_ prefix in general) - makes it easier to fork off a new chipset - makes it easier to diff against other chipsets - storing redundant information in filenames seems wrong Signed-off-by: <stepan@coresystems.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6150 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-08first round name simplification. drop the <component>_ prefix.stepan
the prefix was introduced in the early v2 tree many years ago because our old build system "newconfig" could not handle two files with the same name in different paths like /path/to/usb.c and /another/path/to/usb.c correctly. Only one of the files would end up being compiled into the final image. Since Kconfig (actually since shortly before we switched to Kconfig) we don't suffer from that problem anymore. So we could drop the sb700_ prefix from all those filenames (or, the <componentname>_ prefix in general) - makes it easier to fork off a new chipset - makes it easier to diff against other chipsets - storing redundant information in filenames seems wrong Signed-off-by: <stepan@coresystems.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6149 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-22Drop per-board ram_check() calls for now.Uwe Hermann
Every board had a slightly different invokation, very often commented out anyway. We could either decide that this is only to be used by developers during bringup (and thus added manually to romstage.c and removed before the board gets committed). This method seems to be preferred from what I have heard on IRC / mailing list in the past. Or, we add the ram_check() somewhere globally and allow the user to enable it via menuconfig (possibly only if EXPERT is selected). Either way, the current method of spreading the calls all over the place is not really the way to go. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6115 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-21Simplify a few code chunks, fix whitespace and indentation.Uwe Hermann
Also, remove some less useful comments, some dead code / unused functions. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6108 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-21Drop excessive whitespace randomly sprinkled in romstage.c files.Uwe Hermann
Also drop some dead or useless code snippets. Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6107 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-21Use DIMM0 et al in lots more places instead of hardocding values.Uwe Hermann
The (0xa << 3) expression equals 0x50, i.e. DIMM0. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6103 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-20Some more DIMM0 related cleanups and deduplication.Uwe Hermann
- VIA VT8235: Do the shift in smbus_read_byte() as all other chipsets do. - spd.h: Move RC00-RC63 #defines here, they were duplicated in lots of romstage.c files and lots of spd_addr.h files. Don't even bother for those spd_addr.h which aren't even actually used, drop them right away. - Replace various 0x50 hardcoded numbers with DIMM0, 0x51 with DIMM1, and 0xa0 with (DIMM0 << 1) where appropriate. - Various debug.c files: Replace SMBUS_MEM_DEVICE_START with DIMM0, SMBUS_MEM_DEVICE_END with DIMM7, and drop useless SMBUS_MEM_DEVICE_INC. - VIA VX800: Drop unused SMBUS_ADDR_CH* #defines. - VIA VT8623: Do the shift in smbus_read_byte() as all other chipsets do. Then, replace 0xa0 (which now becomes 0x50) with DIMM0. - alix1c/romstage.c, alix2d/romstage.c: Adapt to recent bit shift changes. - Various files: Drop DIMM_SPD_BASE and/or replace it with DIMM0. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6100 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-20Unify DIMM SPD addressing. For Geode, change thePatrick Georgi
addressing scheme to match the rest of the tree (0x50 instead of 0xa0). abuild tested. Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6099 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-13Enable or disable the power button in KconfigPeter Stuge
Some mainboards need to disable the power button to avoid turning off right after being turned on, while other boards ship with a jumper over the power button and should allow the user to configure the behavior. This adds infrastructure in the form of four mutually exclusive options which can be selected in a mainboard Kconfig (power button forced on/off, and user-controllable with default on/off) and one result bool which source code can test. (Enable the button or not.) The options have been implemented in CS5536 code and for all mainboards which select SOUTHBRIDGE_AMD_CS5536, but should be used also by other chipsets where applicable. Note that if chipset code uses the result bool ENABLE_POWER_BUTTON, then every board using that chipset must select one out of the four control options in order to build. All touched boards should have unchanged behavior, except pcengines/alix1c, traverse/geos and lippert/hurricane-lx where the power button can now be configured by the user. Build tested for alix1c, alix2d, hurricane-lx and wyse-s50. Confirmed to work as advertised on alix1c both with button enabled and disabled. Includes additional traverse/geos changes from Nathan and lippert/hurricane-lx changes from Jens to correctly use the new feature on those boards. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Aurelien Guillaume <aurelien@iwi.me> Acked-by: Nils Jacobs <njacobs8@hetnet.nl> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5948 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-05Remove lib/ramtest.c-include from all CAR boards.Patrick Georgi
Remove many more .c-includes from i945 based boards. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5910 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-27All these boards already had the CACHE_AS_RAM option in their individualWarren Turkal
configs. I just moved it the the CPU that they all use. Signed-off-by: Warren Turkal <wt@penguintechs.org> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5871 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-25Drop some useless "../../../" in #includes (trivial).Uwe Hermann
Build-tested using abuild. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5844 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-21Cut the crap.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5823 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-07Set up an arbitrary amount of system memory on Geode LX, soAurelien Guillaume
coreboot_ram can be unpacked to 1MB. The value is quickly replaced with the real value later, thus causing no harm. Move RAMBASE to the default of 1MB for the affected boards Signed-off-by: Aurelien Guillaume <aurelien@iwi.me> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5779 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-31Make ALIX.2D3 support 2D2 as well.Jens Rottmann
Signed-off-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5759 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-30We call this cache as ram everywhere, so let's call it the same in KconfigStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Myles Watson <mylesgw@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5756 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-30Restructured all vendors' Kconfig files to no longer source the boards'Jens Rottmann
Kconfigs from within the choice/endchoice block. This makes it possible to define user visible board specific options. Moved all vendor names and PCI ids to the vendors' Kconfigs. Now all options in each file depend on the same symbol, so replaced all "depends on"s with a single "if". Sorted boards (sort -d), cleaned whitespace. This patch also introduces a dummy option BOARD_SPECIFIC_OPTIONS, which is always "y" and never used. It it simply needed to have something to attach the boards' "select" statements to. Signed-off-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5754 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-26Remove unused mainboard_config definitions. Trivial.Myles Watson
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5744 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-24* Adds support for PC Engines Alix.2D(1)3 board to Coreboot.Aurelien Guillaume
* DRAM initialization done message is now printed in debug-mode only, rather than everytime. Signed-off-by: Aurelien Guillaume <aurelien@iwi.me> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5739 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-03Drop the USE_PRINTK_IN_CAR option. It's a bogus decision to make for any user /Stefan Reinauer
board porter: printk should always be available in CAR mode. Also drop CONFIG_USE_INIT, it's only been selected on one ASROCK board but it's not been used there. Very odd. There is one usage of CONFIG_USE_INIT which was always off in src/cpu/intel/car/cache_as_ram.inc and we have to figure out what to do with those few lines. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5682 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-07-06Re-integrate "USE_OPTION_TABLE" code.Edwin Beasant
Signed-off-by: Edwin Beasant <edwin_beasant@virtensys.com> Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5653 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-06-10This commit updates the Geode LX GLCP delay control setup from the v2 way to ↵Edwin Beasant
the v3 way. This resolves problems with terminated DRAM modules. Signed-off-by: Edwin Beasant <edwin_beasant@virtensys.com> Acked-by: Roland G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5629 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-05-08Drop console/console.c and pc80/serial.c from mainboards'Patrick Georgi
romstage.c. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5528 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-05-05Rename "apic" and "apic_cluster" to "lapic" and "lapic_cluster"Patrick Georgi
in device trees. Adapt sconfig as necessary. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5525 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-30Get rid of a few more warnings.Myles Watson
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5512 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-27Since some people disapprove of white space cleanups mixed in regular commitsStefan Reinauer
while others dislike them being extra commits, let's clean them up once and for all for the existing code. If it's ugly, let it only be ugly once :-) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5507 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-21* clean up all but two warnings on artecgroup dbe61Stefan Reinauer
* integrate vsm init into normal x86.c code (so it can run above 1M) * call void main(unsigned long bist) except void cache_as_ram_main(void) on Geode LX (as we do on almost all other platforms now) * Unify Geode LX MSR setup (will bring most non-working LX targets back to life) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5471 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-14zero warnings days. Down to under 600 different warnings Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5425 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-08Replace dual_core and quad_core CMOS (nvram) options with multi_core. Fix ↵Myles Watson
some white space. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5380 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-01- get rid of ASM_CONSOLE_LOGLEVEL except in two assembler files.Stefan Reinauer
- start naming all versions of post code output "post_code()" Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5344 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-31Drop \r\n and \n\r as both print_XXX and printk now do this internally.Stefan Reinauer
Only some assembler files still have \r\n ... Can we move that part to C completely? Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5342 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-31This patch drops arch/i386/lib/console.c and arch/i386/lib/console_print.c andStefan Reinauer
makes include/console/console.h and console/console.c usable both in __PRE_RAM__ and coreboot_ram stages. While debugging this, I removed an indirection from the e7520 ram init code (same as we did on a couple of other chipsets, removes some register pressure from romcc) Also, drop remainders of CONFIG_USE_INIT (except the one odd piece of dead code in cache_as_ram.inc) Then some ap_romstage.c fixes, at least the nvidia/l1_2pvv compiled for me with CONFIG_AP_CODE_IN_CAR set in Kconfig which it did not before. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5341 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-29This drops the ASSEMBLY define from romstage.c, tooStefan Reinauer
(since it's not assembly code, this was a dirty hack anyways) Also run awk 1 RS= ORS="\n\n" < $FILE > $FILE.nonewlines mv $FILE.nonewlines $FILE on romstage.c because my perl -pi -e 's,#define ASSEMBLY 1,,g' */*/romstage.c cut some holes into the source. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5320 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-29__PRE_RAM__ is now correctly specified in the Makefile. No need to hack it intoStefan Reinauer
romstage.c anymore Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5315 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-22printk_foo -> printk(BIOS_FOO, ...)Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5266 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-02-27- make HAVE_HARD_RESET match what newconfig didPatrick Georgi
- introduce BOARD_HAS_HARD_RESET and use it if a board provides hard_reset in $(MAINBOARDDIR)/reset.c, instead of some chipset component - move a couple of rules out of the mainboards' Makefiles into src/arch/i386/Makefile.inc: initobj-y += crt0.o obj-y += mainboard.o obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o obj-$(CONFIG_BOARD_HAS_HARD_RESET) += reset.o - remove Makefile.incs that are empty (or comment-only) after these changes, incl. Makefile.romccboard.inc (and references to it) - Make include not fail if Makefile.inc doesn't exist. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Myles Watson <mylesgw@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5168 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-02-25Move the ldscripts logic to src/arch/i386/Makefile.incPatrick Georgi
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Joseph Smith <joe@settoplinux.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5164 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-02-25Unify crt0s setup to src/arch/i386/Makefile.inc. This variablePatrick Georgi
is not something users have to concern themselves with anymore. Also fixes some wrong romstrap configs for boards, fixing a couple of them. Also add "make printcrt0s" target for debugging crt0s when updating modified checkouts. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5162 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-02-23Only handle code as "driver" that actually uses our driverPatrick Georgi
infrastructure (special linking, data structures, etc) Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5150 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-02-09Move all the copies of the romstage.inc rule toPatrick Georgi
src/arch/i386/Makefile.inc For that to work, I had to: - Add a CONFIG_ROMCC variable - Set that variable on all ROMCC boards - conditionally choose romcc or gcc rule based on that variable - remove those two rules from all the boards' Makefiles - switch a couple of boards to HAVE_OPTION_TABLE, as they actually have. Also remove the duplication of rules with the sole difference of if they depend on option_table.h or not. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5099 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-02-08janitor task: unify and cleanup naming.Stefan Reinauer
cache_as_ram_auto.c and auto.c are both called "romstage.c" now. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5092 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-02-07newconfig is no more.Patrick Georgi
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5089 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-02-04Move CAR settings for all GX1, GX2, LX and Intel Slot2 boards to the CPU.Stefan Reinauer
This automatically adds the settings for those boards that didn't have settings at all yet. Also, small fixup to compareboard. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> --> Please help porting all boards from newconfig to Kconfig <-- This is a lot of janitor work and we can use your helping hands. The sooner we can get rid of Kbuild, the better. The KBuild report on the mailing list shows the config differences between newconfig and Kconfig. In theory, all Kconfig configs should be equal to their newconfig pendant. In practice it's better to come close but stay clean. --> Please help porting all boards from newconfig to Kconfig <-- git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5082 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-01-30* fix crt0s/ldscripts paths to fix out of tree build.Stefan Reinauer
* fix iasl output directory for i945 boards (patch for moving it to the mainboard directory will follow) * coreboot_table.c: lb_mainboard can be static * coreboot_table.c: dump memory table in debug and spew mode * fix a warning in bootblock.c * don't include arch/i386/init in arch/i386/Makefile.inc * announce generation of crt0_includes.h * allow overriding $(obj) * drop unused src_types from Makefile * correctly use hostname -s instead of hostname for COMPILE_HOST Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5065 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-01-25Align several kconfig options to match newconfig:Patrick Georgi
HT_CHAIN_UNITID_BASE HT_CHAIN_END_UNITID_BASE SB_HT_CHAIN_ON_BUS0 SB_HT_CHAIN_UNITID_OFFSET_ONLY MAX_CPUS MAX_PHYSICAL_CPUS ROM_SIZE TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 Also hook up asus/p2b-ds Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5051 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-01-16coreboot used to have two different "APIs" for memory accesses:Stefan Reinauer
read32(unsigned long addr) vs readl(void *addr) and write32(unsigned long addr, uint32_t value) vs writel(uint32_t value, void *addr) read32 was only available in __PRE_RAM__ stage, while readl was used in stage2. Some unclean implementations then made readl available to __PRE_RAM__ too which results in really messy includes and code. This patch fixes all code to use the read32/write32 variant, so that we can remove readl/writel in another patch. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5022 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-20Fix all board names in Kconfig as per wiki / vendor website.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4815 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-17Move files from src/cpu/x86/{fpu,mmx,sse}/ to x86/Peter Stuge
Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4803 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-16Set default ROM sizes per-board to match the ROM chip that cameUwe Hermann
with the respective board. Of course, the user can still override the size in menuconfig. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4790 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-15Add CONFIG_GENERATE_* for tables so that the user can select which tables notMyles Watson
to build, but by default all the tables that are available are built. Make PIRQ table build for qemu. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4778 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-08More kconfig:Patrick Georgi
AMD LX AMD SC520 boards by iei, pcengines, technexion, technologic, thomson Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4743 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-04This does away with CONFIG_ROM_PAYLOAD_START and CONFIG_PAYLOAD_SIZE.Patrick Georgi
Both were only really used in pre-cbfs, as the payload's size isn't relevant for the build process anymore. Various calculations in {no,}failovercalculation.lb are adapted accordingly. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4720 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-03Remove:Patrick Georgi
- CONFIG_CBFS - anything that's conditional on CONFIG_CBFS == 0 - files that were only included for CONFIG_CBFS == 0 In particular: - elfboot - stream boot code - mini-filo and filesystems (depends on stream boot code) After this commit, there is no way to build an image that is not using CBFS anymore. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Myles Watson <mylesgw@gmail.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4712 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-09-23simplify source tree hierarchy: move files from sdram/ and ram/ to lib/Stefan Reinauer
It's only three files. Also fix up all the paths (Gotta love included C files) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4661 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-12Kconfig!Patrick Georgi
Works on Kontron, qemu, and serengeti. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> tested on abuild only. Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4534 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-11Enable CBFS everywhere. All boards compiled for me (abuild tested),Patrick Georgi
and we will fix issues as they appear. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4531 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-30the tool chain settings should not be in renamed (as they will never live inStefan Reinauer
Kconfig) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4384 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 15:53:39 +0000