summaryrefslogtreecommitdiff
path: root/src/mainboard/ocp
AgeCommit message (Collapse)Author
2020-06-22mb/ocp/deltalake: add RW_MRC_CACHE flash regionJonathan Zhang
Add RW_MRC_CACHE flash region to hold MRC cache data. With memory training skipped for subsequent reboots, the boot time is reduced by 8 minutes on OCP Delta Lake server, when FSP verbose logging is turned on. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: I27ed00100e1ea9e29b0e71ea5a8397cd550e193a Reviewed-on: https://review.coreboot.org/c/coreboot/+/42025 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-22mb/ocp/deltalake: Add OCP Delta Lake mainboardJonathan Zhang
OCP Delta Lake server is a one socket server platform powered by Intel Cooper Lake Scalable Processor. The Delta Lake server is a blade of OCP Yosemite V3 multi-host sled. TESTED=Successfully booted on both YV3 config A Delta Lake server and config C Delta Lake server. The coreboot payload is Linux kernel plus u-root as initramfs. Below are the logs of ssh'ing into a config C deltalake server: jonzhang@devvm2573:~$ ssh yv3-cth root@ip's password: Last login: Mon Apr 20 21:56:51 2020 from [root@dhcp-100-96-192-156 ~]# lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 52 On-line CPU(s) list: 0-51 ... [root@dhcp-100-96-192-156 ~]# cbmem 34 entries total: 0:1st timestamp 28,621,996 40:device configuration 178,835,602 (150,213,605) ... Total Time: 135,276,123,874,479,544 [root@dhcp-100-96-192-156 ~]# cat /proc/cmdline root=UUID=f0fc52f2-e8b8-40f8-ac42-84c9f838394c ro crashkernel=auto selinux=0 console=ttyS1,57600n1 LANG=en_US.UTF-8 earlyprintk=serial,ttyS0,57600 earlyprintk=uart8250,io,0x2f8,57600n1 console=ttyS0,57600n1 loglevel=7 systemd.log_level=debug Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Signed-off-by: Reddy Chagam <anjaneya.chagam@intel.com> Change-Id: I0a5234d483e4ddea1cd37643b41f6aba65729c8e Reviewed-on: https://review.coreboot.org/c/coreboot/+/40387 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2020-06-19Kconfig: Escape variable to accommodate new Kconfig versionsPatrick Georgi
Kconfig 4.17 started using the $(..) syntax for environment variable expansion while we want to keep expansion to the build system. Older Kconfig versions (like ours) simply drop the escapes, not changing the behavior. While we could let Kconfig expand some of the variables, that only splits the handling in two places, making debugging harder and potentially messing with reproducible builds (e.g. when paths end up in configs), so escape them all. Change-Id: Ibc4087fdd76089352bd8dd0edb1351ec79ea4faa Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42481 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
2020-06-07acpi: Rename motherboard_fill_fadt() to mainboard_fill_fadt()Kyösti Mälkki
The prefix mainboard_ was used everywhere else. Change-Id: Ie576fd47301aa484cb1396e0c6f7260b7698af4d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42007 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-07mb/*: Remove some fadt.c filesKyösti Mälkki
Change-Id: I13ed3b6e8608c37c1ebe51838e4052f89a638d83 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41947 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
Stefan thinks they don't add value. Command used: sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool) The exceptions are for: - crossgcc (patch file) - gcov (imported from gcc) - elf.h (imported from GNU's libc) - nvramtool (more complicated header) The removed lines are: - fmt.Fprintln(f, "/* This file is part of the coreboot project. */") -# This file is part of a set of unofficial pre-commit hooks available -/* This file is part of coreboot */ -# This file is part of msrtool. -/* This file is part of msrtool. */ - * This file is part of ncurses, designed to be appended after curses.h.in -/* This file is part of pgtblgen. */ - * This file is part of the coreboot project. - /* This file is part of the coreboot project. */ -# This file is part of the coreboot project. -# This file is part of the coreboot project. -## This file is part of the coreboot project. --- This file is part of the coreboot project. -/* This file is part of the coreboot project */ -/* This file is part of the coreboot project. */ -;## This file is part of the coreboot project. -# This file is part of the coreboot project. It originated in the - * This file is part of the coreinfo project. -## This file is part of the coreinfo project. - * This file is part of the depthcharge project. -/* This file is part of the depthcharge project. */ -/* This file is part of the ectool project. */ - * This file is part of the GNU C Library. - * This file is part of the libpayload project. -## This file is part of the libpayload project. -/* This file is part of the Linux kernel. */ -## This file is part of the superiotool project. -/* This file is part of the superiotool project */ -/* This file is part of uio_usbdebug */ Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-10src/mainboard: Replace GPLv2 long form headers with SPDX headerElyes HAOUAS
Change-Id: I64d9468682a4aae3084b17b8724d035f17d01dff Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41187 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-06treewide: replace GPLv2 long form headers with SPDX headerPatrick Georgi
This replaces GPLv2-or-later and GPLv2-only long form text with the short SPDX identifiers. Commands used: perl -i -p0e 's|/\*[*\n\t ]*This program is free software[:;].*you.*can.*redistribute.*it.*and/or.*modify.*it.*under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*as.*published.*by.*the.*Free.*Software.*Foundation[;,].*version.*2.*of.*the.*License.*or.*(at.*your.*option).*any.*later.*version.+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-or-later */|s' $(cat filelist) perl -i -p0e 's|/\*[*\n\t ]*This program is free software[:;].*you.*can.*redistribute.*it.*and/or.*modify.*it.*under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*as.*published.*by.*the.*Free.*Software.*Foundation[;,].*version.*2.+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-only */|s' $(cat filelist) perl -i -p0e 's|/\*[*\n\t ]*This program is free software[:;].*you.*can.*redistribute.*it.*and/or.*modify.*it.*under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*version.*2.*as.*published.*by.*the.*Free.*Software.*Foundation[.;,].+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-only */|s' $(cat filelist) perl -i -p0e 's|/\*[*\n\t ]*This software is licensed under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*version.*2.*as.*published.*by.*the.*Free.*Software.*Foundation,.+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-only */|s' $(cat filelist) Change-Id: I7a746088a35633c11fc7ebe86006e96458a1abf8 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41066 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-05-06treewide: Move "is part of the coreboot project" line in its own commentPatrick Georgi
That makes it easier to identify "license only" headers (because they are now license only) Script line used for that: perl -i -p0e 's|/\*.*\n.*This file is part of the coreboot project.*\n.*\*|/* This file is part of the coreboot project. */\n/*|' # ...filelist... Change-Id: I2280b19972e37c36d8c67a67e0320296567fa4f6 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41065 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-02acpi: Move ACPI table support out of arch/x86 (3/5)Furquan Shaikh
This change moves all ACPI table support in coreboot currently living under arch/x86 into common code to make it architecture independent. ACPI table generation is not really tied to any architecture and hence it makes sense to move this to its own directory. In order to make it easier to review, this change is being split into multiple CLs. This is change 3/5 which basically is generated by running the following command: $ git grep -iIl "arch/acpi" | xargs sed -i 's/arch\/acpi/acpi\/acpi/g' BUG=b:155428745 Change-Id: I16b1c45d954d6440fb9db1d3710063a47b582eae Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40938 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-05-01md/tiogapass: move all *.h to dir and make them globalMaxim Polyakov
It is necessary to rename the file gpio.h so that there are no conflict with another file (src/include/gpio.h) Change-Id: I4e3ef5882d6cb0ddbcb8357b54106ff2f47e4c51 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40733 Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01xeon_sp, ocp/tiogapass: remove unused FSP-style GPIO defsMaxim Polyakov
Change-Id: I8599dca99c1f34e3937c5b77b3505815ce625b46 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39453 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-01mb/ocp/tiogapass: fix advanced _PAD_CFG_STRUCT macros in configMaxim Polyakov
If the current pad configuration can not be defined using standard macros from the gpio_defs.h [1], then the intelp2m utility generates "advanced" _PAD_CFG_STRUCT() macros. However, often this configuration in the vendor’s firmware is erroneous. Change the extended macros to standard ones taking into account the information based on the schematic diagram and the previous GPIO configuration for FSP-M [2]. [1] src/soc/intel/common/block/include/intelblocks/gpio_defs.h [2] src/mainboard/ocp/tiogapass/skxsp_tp_gpio.h Change-Id: I56e45b1df77acbdd67e6325c3745a7ad137f8805 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40732 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com>
2020-05-01mb/ocp/tiogapass: rework GPIOs configuration using macrosMaxim Polyakov
This format of PCH GPIOs configuration, unlike the raw DW0 and DW1 registers values from the inteltool dump, is more understandable and makes the code much cleaner. The gpio.h file with PAD_CFG macros was automatically generated using the util/intelp2m [1] utility: ./intelp2m -p lbg -file tiogapass/vendorbios/inteltool_gpio.log According to the documentation [2], the Host Software Pad Ownership register only affects the pads that are configured as input (GPI). The intelp2m utility takes this into account when converting macros and ignores bits from this register for the corresponding pads. [1] https://review.coreboot.org/c/coreboot/+/35643 [2] Intel Document Number: 549921 Change-Id: I21e98721e58b00be9196927837daa2b5d2560822 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40731 Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01mb/tiogapass: use common driver to configure GPIOMaxim Polyakov
According to changes in the soc/xeon_sp code [1,2], server motherboards with Lewisburg PCH can use the soc/intel/common/gpio driver to configure GPIO controller. This patch adds pads configuration map, which has the format required by the GPIO driver. The data for this was taken from the inteltool register dump with AMI firmware. The gpio.h file with pad configuration was generated automatically using the util/intelp2m [3]: ./intelp2m -raw -p lbg -file tiogapass/vendorbios/inteltool_gpio.log [1] https: //review.coreboot.org/c/coreboot/+/39425 [2] https: //review.coreboot.org/c/coreboot/+/39428 [3] https: //review.coreboot.org/c/coreboot/+/35643 Change-Id: I818d040fa33f3e7b94b73c9bbbafca5df424616d Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39427 Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01mb/ocp/sonorapass: Populate FSP-M parametersAndrey Petrov
Since CPX FSP headers are not released yet, populate certain settings with hard-coded offsets. Provided values are probably not correct and I do not understand what they mean and there is no documentation available yet. However they were found to work to a certain degree. TEST=tested on OCP Sonora Pass EVT Change-Id: I0f78cde69cb8a49a388a412b97bf8713e5b380ea Signed-off-by: Andrey Petrov <anpetrov@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40554 Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01mb/ocp/sonorapass: Add Sonora PassRyback Hung
Just a minimal set of board files needed to get it to boot in 1 CPU mode. Signed-off-by: Ryback Hung <ryback.hung%quantatw.com@gtempaccount.com> Change-Id: Ia7b45c78b38d091bd9535899b681746e13efb4fe Reviewed-on: https://review.coreboot.org/c/coreboot/+/40469 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com>
2020-05-01mb/ocp/tiogapass: Update UPD IIO bifurcation at run-timeJohnny Lin
Update UPD IIO bifurcation at run-time according to different Riser cards. For detail please reference Facebook Server Intel Motherboard v4.0, Sec. 10.1.2 Riser card types. With the engineering build FSP, it can only configure IIO for one socket so my local test needs to remove all socket1 elements from tp_iio_bifur_table. This change relies on [1] and need to add GPP_C15 and GPP_C16 to early_gpio_table for gpio configuration in bootblock. [1] https://review.coreboot.org/c/coreboot/+/39427/ Tested=OCP Tioga Pass can see socket0 IIO being updated with an engineering build FSP. Change-Id: I8e63a233a2235cd45b14b20542e6efab3de17899 Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39895 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-04-30mb/ocp/tiogapass: Implement port 80h direct to GPIO and init UART pinsBryantOu
Enable aspeed's function that port 80h direct to GPIO for LED display, refer to section 9.4 Port 80h Direct to GPIO Guide of aspeed's Application Design Guide, also configure GPIO to UART for output serial console messages. Tested=Check if port 80h LED debug card can display POST codes at early stage, and serial console can see the related messages. Change-Id: I087d5a81b881533b4550c193e4e9720a134fb8e7 Signed-off-by: BryantOu <Bryant.Ou.Q@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40481 Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-18mb/ocp/tiogapass: Pull POST complete pinBryantOu
Tioga Pass platform use GPIO pin of GPP_B20 for POST complete, BIOS needs to configure this pin for BMC to poll, so it knows when to start to access other components. Tested=Read GPIO status (GPIOAA7) in OpenBMC, the value is 0, the command and result are shown as below, root@bmc-oob:~# cat /tmp/gpionames/FM_BIOS_POST_CMPLT_N/value 0 root@bmc-oob:~# Change-Id: I134f80153461c5acd872587038a2207586b658dd Signed-off-by: BryantOu <Bryant.Ou.Q@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40426 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-04-14mb/ocp/tiogapass: Add missing spaces around operatorsPaul Menzel
Change-Id: I8930e96e5f2c45b8658dc4dfe1ab57d573e7b26f Fixes: b75bcc978a ("mb/ocp/tiogapass: Properly configure early serial output") Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39870 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com>
2020-04-06mainboard/ocp: Use SPDX for GPL-2.0-only filesAngel Pons
Done with sed and God Lines. Only done for C-like code for now. Change-Id: I136e19fbba22b71676a0163a88ae341356c31271 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40088 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-26mb/ocp/tiogapass: Properly configure early serial outputAndrey Petrov
Tioga Pass comes with AST2500 BMC which offers SuperIO functionality. However we currently do not configure/enable SuperIO chip. As a result system boots pretty silently on cold boot. Then FSP configures SuperIO and resets the system so on next boot serial console does work. This makes debugging difficult because pre-FSP output is invisible. This patch enables bootblock to properly configure desired BMC SuperIO port so early serial output is visible. TEST=do a cold boot on OCP Tioga Pass, observe bootblock output starting from bootblock. Change-Id: Iff8e6a862858d733f529bb9b8c65e22e5ec6b521 Signed-off-by: Andrey Petrov <anpetrov@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-03-26soc/intel/xeon_sp: Refactor code to allow for additional CPUs typesAndrey Petrov
Refactor the code and split it into Xeon common and CPU-specific code. Move most Skylake-SP code into skx/ and keep common code in the current folder. This is a preparation for future work that will enable next generation server CPU. TEST=Tested on OCP Tioga Pass. There does not seem to be degradation of stability as far as I could tell. Signed-off-by: Andrey Petrov <anpetrov@fb.com> Change-Id: I448e6cfd6a85efb83d132ad26565557fe55a265a Reviewed-on: https://review.coreboot.org/c/coreboot/+/39601 Reviewed-by: David Hendricks <david.hendricks@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-25mb/ocp/tiogapass: Enable IPMI KCSJohnny Lin
A bigger than zero value of bmc_boot_timeout must be set for KCS ipmi_get_bmc_self_test_result() to run, otherwise the self test result will be error and won't write SMBIOS type 38 table. Here we set 60 seconds as the maximal self test timeout. Tested=Check if the BMC IPMI response data and SMBIOS type 38 on OCP Tioga Pass are correct or not. Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Change-Id: I3678973736a675ed22b5bc9da20a2ca947220f4b Reviewed-on: https://review.coreboot.org/c/coreboot/+/38995 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-03-18mainboard/[g-p]*: Remove copyright noticesPatrick Georgi
They're listed in AUTHORS and often incorrect anyway, for example: - What's a "Copyright $year-present"? - Which incarnation of Google (Inc, LLC, ...) is the current copyright holder? - People sometimes have their editor auto-add themselves to files even though they only deleted stuff - Or they let the editor automatically update the copyright year, because why not? - Who is the copyright holder "The coreboot project Authors"? - Or "Generated Code"? Sidestep all these issues by simply not putting these notices in individual files, let's list all copyright holders in AUTHORS instead and use the git history to deal with the rest. Change-Id: I426518e8e18de1c8efcfb7ecb0835df3e257dca1 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39608 Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-10soc/intel/xeon-sp,mb/ocp/tiogapass: Don't fake binariesNico Huber
If we don't pretend to have binaries, there is no need to add fake ones. This also fixes building the default config. Change-Id: I8f933f24a734a9ce3d82ef57f7f234ee4dfa86e9 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39383 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-06mainboard/ocp: Add support for OCP platform TiogaPassJonathan Zhang
OCP platform Tiogapass is a 2-socket server platform, which is based on a chipset including Intel Skylake-SP processors and a Lewisburg PCH. Skylake-SP is a processor in Intel Xeon Scalable Processor family. Following ACPI tables are added: DSDT/SSDT, MADT, FACP, FACS, HPET, MCFG, SLIT, SRAT, DMAR This patchset is tested on a Tiogapass board. It booted with Linux kernel 4.16.0; lscpu command shows all 72 cpus (2 sockets, 18 cores, 2 thread per core); ssh command shows networking is up from Mellanox ConnectX-4 PCIe NIC card. Towards successful gerrit buildbot build, note that: * microcode is in coreboot intel-microcode submodule repo. * IFD binary is included in this patch. * Dummy ME binary is used, as it may take long time for Intel ME binary to be available in public domain. * Fake FSP binary is used, as at this moment the SKX-SP FSP binary is not going to be available in public domain. Known issues (Not intend to address in this initial support for Xeon-SP processors): * c6 state is not supported. * dsdt table is not fully populated, such as processor/socket devices, some PCIe devices. * SMM handlers are not added. Following are some command execution with CentOS booted from local SATA disk: [root@localhost ~]# lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 72 On-line CPU(s) list: 0-71 Thread(s) per core: 2 Core(s) per socket: 18 Socket(s): 2 NUMA node(s): 2 Vendor ID: GenuineIntel CPU family: 6 Model: 85 Model name: Intel(R) Xeon(R) Gold 6139 CPU @ 2.30GHz Stepping: 4 CPU MHz: 140.415 BogoMIPS: 4626.46 Virtualization: VT-x L1d cache: 32K L1i cache: 32K L2 cache: 1024K L3 cache: 25344K NUMA node0 CPU(s): 0-17,36-53 NUMA node1 CPU(s): 18-35,54-71 [root@localhost ~]# ifconfig eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 172.23.68.190 netmask 255.255.0.0 broadcast 172.23.255.255 inet6 2620:10d:c082:9063:268a:7ff:fe57:5af0 prefixlen 64 //cut inet6 fe80::268a:7ff:fe57:5af0 prefixlen 64 scopeid 0x20<link> inet6 2620:10d:c082:9063::5d2 prefixlen 128 scopeid 0x0<global> ether 24:8a:07:57:5a:f0 txqueuelen 1000 (Ethernet) RX packets 84249 bytes 6371591 (6.0 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 8418 bytes 748781 (731.2 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) RX packets 613 bytes 63906 (62.4 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 613 bytes 63906 (62.4 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 [root@localhost ~]# cbmem 36 entries total: // Lines were cut to avoid checkpatch.pl warnings Total Time: 96,243,882,140,175,829 Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Signed-off-by: Reddy Chagam <anjaneya.chagam@intel.com> Tested-by: johnny_lin@wiwynn.com Change-Id: I29868f03037d1887b90dfb19d15aee83c456edce Reviewed-on: https://review.coreboot.org/c/coreboot/+/38549 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2019-11-21mb/*/*: Remove BROADWELL_DE boardsArthur Heymans
Relocatable ramstage, postcar stage and C_ENVIRONMENT_BOOTBLOCK are now mandatory features, which this platform lacks. Change-Id: I3d9b6bb48bfd15c0182448f774e9af1e0c944fd5 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36983 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-10-24mb/ocp/monolake: Configure IPMI BMC FRB2 watchdog timer via VPD variablesJohnny Lin
Add VPD variables for enabling/disabling FRB2 watchdog timer and setting the timer countdown value. By default it would start the timer and trigger hard reset when it's expired. The timer is expected to be stopped later by payload or OS. Right now the timer is started after FSP-M. Ideally it should be before FSP-M (to detect memory training error). Tested on OCP Mono Lake. Change-Id: I82b244d08380a0461c92662e025d8b95b3133e23 Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36180 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-10-06mb/ocp/monolake: Add GPIO table to initialize custom configsJingle Hsu
Add a GPIO table for Monolake to initialize GPIOs with custom board configurations. Tested on Monolake. Change-Id: I74906bf9395a333be6250ffbd181da536e016f30 Signed-off-by: Jingle Hsu <jingle_hsu@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35367 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-09-24mainboard/ocp/monolake: Hide internal NICAndrey Petrov
Disable root port IOU0 to which built-in NIC is attached. TEST=on OCP monolake, hide built-in NIC and make sure OS does not report built-in NIC Change-Id: I2384e7dd073355f0ced2902ac2d8418996b1c5aa Signed-off-by: Andrey Petrov <anpetrov@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35322 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2019-09-22mb/ocp/monolake: Add vboot RO only supportPhilipp Deppenwiese
Change-Id: I28a21d64e2781af294670a94c1fc88fb81e80f9e Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35492 Reviewed-by: Andrey Petrov <anpetrov@fb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-21mb/ocp/monolake: Implement bank/locator schemeAndrey Petrov
Implement Locator and Bank fields (as reported by dmidecode) to match vendor BIOS. TEST=on OCP monolake, run dmidecode tool and see that "Locator" field matches expectation. Change-Id: Ia271ff1e596ba469cf42e23d8390401c27670a27 Signed-off-by: Andrey Petrov <anpetrov@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35319 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-09-02mb/ocp/monolake: use VPD data to configure FSP UPDJonathan Zhang
Summary: This patch calls monolake board specific function to query settings stored in VPD binary blob to configure FSP UPD variable HyperThreading. Test Plan: * Build an OCP MonoLake coreboot image, run following command to initialize RW_VPD and insert HyperThreading key: vpd -f build/coreboot.rom -O -i RW_VPD -s 'HyperThreading=0' * Flash the image to MonoLake, boot and observe following message in boot log: Detected 16 CPU threads If RW_VPD partition does not exist, or if HyperThreading key/value pair does not exist, the boot log has: Detected 32 CPU threads Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: I799d27734fe4b67cd1f40cae710151a01562b1b2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34636 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-09-02mb/*: Use common IPMI KCS driverPatrick Rudolph
Remove duplicated code and instead use the IPMI KCS driver, which provides the same functionality. Change-Id: I419713c9bef02084cca1ff4cf11c33c2e3e8d3c1 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33490 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Andrey Petrov <anpetrov@fb.com>
2019-08-20mb/ocp/monolake: Add IPMI CMOS clear supportJohnny Lin
coreboot would clear CMOS by request via IPMI command, for example BMC can issue "bios-util server --boot_order enable --clear_CMOS" to set the request and reboot the system, then coreboot would clear CMOS on the next boot. Tested on Mono Lake Change-Id: I21d44557896680cfac3c3b6d83e07b755b242cad Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34857 Reviewed-by: Johnny Lin Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-08intel/fsp_broadwell_de: Remove redundant TSC_MONOTONIC_TIMERKyösti Mälkki
Change-Id: I240e9e767c9b38b3b06d3978fd20ddb37a96e470 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34109 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-06-21mb/ocp/wedge100s: Use the new IPMI driverPatrick Rudolph
* Enable decoding the IPMI KCS to LPC * Select the IPMI driver * Add the PNP device that holds the IPMI KCS base address Tested on Wedge100s. Change-Id: I35634bbcbe6893bd72ec7e41f6ca7bba09d819a2 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33489 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-05-16mb/ocp/monolake: replace IS_ENABLED(CONFIG_*) with CONFIG()Patrick Georgi
That's how we do it these days. Change-Id: I6bf6460440d0f2e6973734ba8894a4be981d03c5 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32812 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-04-28mb/ocp/monolake: add TPM and IPMI supportLukasz Siudut
Changes includes: - enable TPM1 + add entry in devicetree - configure LPC IO to make IPMI work + add entry in devicetree - introduce DSDT and SMBIOS entries for IPMI to make it detectable by ipmi_si driver Signed-off-by: Lukasz Siudut <lsiudut@fb.com> Change-Id: Ia975643064075f1f861f4ead6f24ed71f345ea04 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32443 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-04-10mb/ocp/monolake: Add board.fmdAndrea Barberio
Change-Id: I6095c3b30990b530c5bc4e2c808879252680e1d7 Signed-off-by: Andrea Barberio <barberio@fb.com> Signed-off-by: David Hendricks <dhendrix@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32260 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-03-08coreboot: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX)Julius Werner
This patch is a raw application of find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g' Change-Id: I6262d6d5c23cabe23c242b4f38d446b74fe16b88 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-05mainboard: Enable PRESERVE flag in all vboot/chromeos FMD filesHung-Te Lin
For Chrome OS (or vboot), The PRESERVE flags should be applied on following sections: RO_PRESERVE, RO_VPD, RW_PRESERVE, RW_ELOG, RW_NVRAM, RW_SMMSTORE, RW_VPD, RO_FSG (b:116326638), SI_GBE (chromium:936768), SI_PDR (chromium:936768) With the new PRESERVE flag, we don't need RO_PRESERVE and RW_PRESERVE in the future. But it's still no harm to use it if there are multiple sections all needing to be preserved. BUG=chromium:936768 TEST=Builds google/eve and google/kukui inside Chrome OS source tree. Also boots successfully on eve and kukui devices. Change-Id: I6664ae3d955001ed14374e2788d400ba5fb9b7f8 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31709 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-03-01device/pci: Fix PCI accessor headersKyösti Mälkki
PCI config accessors are no longer indirectly included from <arch/io.h> use <device/pci_ops.h> instead. Change-Id: I2adf46430a33bc52ef69d1bf7dca4655fc8475bd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31675 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-02-22mb/ocp/monolake: Fix booting issuesLukasz Siudut
We experienced booting issues during FSP-M phase. Applying fix that was introduced for wedge100s - 817994c1bec (mb/ocp/wedge100s/romstage: Workaround broken platform state) - helped and systems started to boot properly. Signed-off-by: Lukasz Siudut <lsiudut@fb.com> Change-Id: Ibfbe9d19c7413098c56d1b6131640097fdf731ab Reviewed-on: https://review.coreboot.org/c/31435 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-02-08mb/ocp/wedge100s: Fix devicetreePatrick Rudolph
Match devicetree what's present and in use. Tested on wedge100s: All PCI devices show up. Change-Id: I669d059da1876ed669793db8c7eb1b96b481cb4c Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/31228 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-02-02mb/ocp/wedge100s: Remove MAINBOARD_USES_IFD_GBE_REGIONPatrick Rudolph
It has 2x 10GbE XGMII and 1x i210IT on PCIe, but no GBE. Change-Id: I641c336350a0b05f3db7603cc7f6281ff3b0c388 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/31198 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-01-25sb/intel/common: Show "Add gigabit ethernet firmware" only for boards that ↵Jan Tatje
need it Hide "Add gigabit ethernet firmware" option for boards that do not use GbE firmware in GbE section. The option is now hidden by default and can be reenabled on a per-board basis by selecting MAINBOARD_USES_IFD_GBE_REGION in the mainboards Kconfig. The following boards seem to use this: mb/roda/rv11 mb/ocp/wedge100s mb/ocp/monolake mb/lenovo/x230 mb/lenovo/x220 mb/lenovo/x201 mb/lenovo/x200 mb/lenovo/t530 mb/lenovo/t520 mb/lenovo/t430s mb/lenovo/t430 mb/lenovo/t420s mb/lenovo/t420 mb/lenovo/t400 mb/kontron/ktqm77 mb/intel/saddlebrook mb/intel/kblrvp mb/intel/dg43gt mb/intel/dcp847ske mb/intel/coffeelake_rvp mb/intel/camelbackmountain_fsp mb/hp/revolve_810_g1 mb/hp/folio_9470m mb/hp/compaq_8200_elite_sff mb/hp/8770w mb/hp/8470p mb/hp/8460p mb/hp/2760p mb/hp/2570p mb/google/sarien mb/facebook/watson mb/compulab/intense_pc mb/asus/maximus_iv_gene-z The boards were identified by looking at devicetree.cb, but this list is possibly still incomplete. Change-Id: Ibfb07902ad93fe5ff2bd4f869abcf6579f7b5a79 Signed-off-by: Jan Tatje <jan@jnt.io> Reviewed-on: https://review.coreboot.org/c/30790 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-24mb/ocp/wedge100s: Add SuperIO supportPatrick Rudolph
* Enable COM1, COM2, PMC1 and PMC2 TODO: Look at additional configuration and EC space. Tested on wedge100s. The serial works without CONFIG_CONSOLE_SERIAL. Change-Id: Id139bf243c7e7ac3e51a0ddb19d2396452341e29 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/30961 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-01-15mainboard/ocp/wedge100s: Fix uartPatrick Rudolph
* Route IO 0x6e/0x6f to LPC bus * Setup ITE8526 in early_mainboard_romstage_entry * Fix romstage serial console by disabling internal uart default setting * Unselect CONFIG_INTEGRATED_UART, as it doesn't use internal UARTs * Select CONFIG_DRIVERS_UART_8250IO, as it has a SuperIO serial * Configure UPDs related to serial Change-Id: I59cd83ed43dbf4ee26685e4a573de153291f7074 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/30827 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-01-14soc/intel/fsp_broadwell_de: Move early_mainboard_romstage_entry()Patrick Rudolph
Move early_mainboard_romstage_entry before console_init. Allows to setup a SuperIO, if any, for serial console. Change-Id: I370263a6197a4c0c805352f07fedddbee1b8e247 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/30828 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-06superio/*: Link early initialization into bootblockArthur Heymans
This allows to set up the SuperIO in the C_ENVIRONMENT_BOOTBLOCK bootblocks. It is likely unnecessary to do this in verstage. This also renames COMMON_ROMSTAGE to COMMON_PRE_RAM. Change-Id: I3d999611baa1e79c79fe6b1f01822ebaa5f85daf Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-12-19mb/ocp/wedge100s/romstage: Workaround broken platform statePatrick Rudolph
Sometimes the platform boots in an invalid state, that will cause FSP-M to fail. As a board_reset() doesn't fix it, issue an full_reset() as soon as the IA32_FEATURE_CONTROL MSR is locked at beging of romstage. Tested on wedge100s. After full reset the system behaves as normal. Change-Id: I1a382b8fb650311b0c24b48e0986d22edfa2d261 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/30290 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-11-23mb: Set coreboot as DSDT's manufacturer model IDElyes HAOUAS
Field 'OEMID' & "OEM Table ID" are related to DSDT table not to mainboard. So use macro to set them respectvely to "COREv4" and "COREBOOT". Change-Id: I060e07a730e721df4a86128ee89bfe168c69f31e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29790 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: David Guckian
2018-11-21mainboard/ocp/wedge100s: Add vboot supportPhilipp Deppenwiese
* Add RO only FMAP. * Add kconfig options. Tested=OCP Wedge100s Change-Id: I1979e0263e41f21c01c407ac81ad1198a53741e8 Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-on: https://review.coreboot.org/c/29593 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-21ACPI: Fix DSDT's revision fieldElyes HAOUAS
DSDT revision is =1 for ACPI v1 and =2 for greater ACPI version. This will cause the AML interpreter to use 32-bit integers and math if the version is 1, and 64-bit if the version is >=2. Current spec version is 2 for ACPI 6.2-a. Change-Id: I77372882d5c77b7ed52dcdd88028403df6f6fa7f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29626 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-17mb/*/*: Clean up FADT checksum assignmentJonathan Neuschäfer
The assignment of header->checksum was in some cases done twice, or unnecessarily split into two lines. Change-Id: Ib0c0890d7589e6a24b11e9bda10e6969c7d73c56 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/28988 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2018-09-07wedge100s: Add TPM supportMikolaj Walczak
Change-Id: Id7e8ad63de2a6094c66cbd47ae9b7707a9af4e81 Signed-off-by: Mikolaj Walczak <mwalczak@fb.com> Reviewed-on: https://review.coreboot.org/28529 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-07fsp_broadwell_de: enable spi consoleOkash Khawaja
this enables spi console for wedge100s with broadwell_de. the console size is 64kb. enabling spi console in `board.fmd` enables code which calls into `timer_monotonic_get` (from `spi_flash_cmd_poll_bit`) and `udelay` (from `ich_status_poll`). this patch selects `TSC_CONSTANT_RATE` in fsp_broadwell_de's Kconfig to satisfy that. Change-Id: Ib925c5aee88b65c46a81534405c364dd5649f8e8 Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com> Reviewed-on: https://review.coreboot.org/28528 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-09-06wedge100s: enable mrc cache in fmapOkash Khawaja
this enables mrc cache in fmap for wedge100s and always enable it in Kconfig. Change-Id: I27cd236f67a6500b40fc3eb731397d408402f041 Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com> Reviewed-on: https://review.coreboot.org/28527 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-13src/mb: Remove some unneeded includesElyes HAOUAS
Change-Id: I3108193c0e0b644cecb74ae0c7a7b54e24a75b58 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28049 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-09mainboard: Get rid of device_t in ramstageElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I07e00afbbd2c19cf3ea6e08f228eb39e45f1ad0c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26983 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-31cpu/x86/mtrr: Get rid of CACHE_ROM_SIZE_OVERRIDENico Huber
As far as I can see this Kconfig option was used wrong ever since it was added. According to the commit message of 107f72e (Re-declare CACHE_ROM_SIZE as aligned ROM_SIZE for MTRR), it was only necessary to prevent overlapping with CAR. Let's handle the potential overlap in C macros instead and get rid of that option. Currently, it was only used by most FSP1.0 boards, and only because the `fsp1_0/Kconfig` set it to CBFS_SIZE (WTF?). Change-Id: I4d0096f14a9d343c2e646e48175fe2127198a822 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/26566 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-05mainboard/ocp/wedge100s: Initial commitDavid Hendricks
This patch does the following: 1. Copy src/mainboard/intel/camelbackmountain_fsp to src/mainboard/ocp/wedge100s. 2. Update Kconfig files 3. Add board.fmd 4. Enable VPD The OCP Wedge100S is a 100GbE top-of-rack switch with a Xeon D-1500 com-express module. More info is available at http://www.opencompute.org/wiki/Networking/SpecsAndDesigns. Signed-off-by: Sudhakar Mamillapalli <sudhakar@fb.com> Signed-off-by: David Hendricks <dhendricks@fb.com> Change-Id: Ia150b066124953c7c0abe8ea5a13e4131194ea00 Reviewed-on: https://review.coreboot.org/25671 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-05-05mainboard/ocp/monolake: Initial commitDavid Hendricks
This patch does the following: 1. Copies mainboard/intel/camelback_fsp to mainboard/ocp/monolake 2. Adds Kconfig files to mainboard/ocp 3. Makes minor board-specific changes (board_info.txt, Kconfig variables) The OCP Mono Lake platform consists of up to 4 single-socket Xeon D-1500 microservers in a Yosemite v1 chassis. More info is available at http://www.opencompute.org/wiki/Server/SpecsAndDesigns. Signed-off-by: David Hendricks <dhendricks@fb.com> Change-Id: If358162abe67e9411fd2514d48f3b3411da15f68 Reviewed-on: https://review.coreboot.org/25669 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>