summaryrefslogtreecommitdiff
path: root/src/mainboard/newisys/khepri/auto.c
AgeCommit message (Collapse)Author
2007-11-02This patch fixes the superio of the khepri 2100e as detected:Stefan Reinauer
> superiotool r2922 > Found Winbond W83627HF/F/HG/G (id=0x52, rev=0x0d) at 0x2e Don't use the non-working trident driver for the blade3d (onboard vga in the rom emulator has not been tested either) It also adds some preliminary CAR support to the board, so it has a chance to build again. This board was broken since a couple of months, and the changes are minimal, so I consider this a trivial change -- It doesn't change anything that was used, obviously Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2926 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-10-24Change all occurences of NSC to nsc in the code. The next commitUwe Hermann
will then rename the src/superio/NSC directory to src/superio/nsc. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2472 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-10-04AMD Rev F supportYinghai Lu
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2435 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2005-12-02issue 41 - fix up motherboard compilation. There's always hope.Stefan Reinauer
1201_ht_bus0_dev0_fidvid_mb.diff part 1 git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2120 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2005-10-25- See Issue Tracker id-12 "lnxi-patch-12".Jason Schildt
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2076 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2005-08-05cleanup of khepri targetarch import user (historical)
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1993 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2005-07-06Revision: linuxbios@linuxbios.org--devel/freebios--devel--2.0--patch-58arch import user (historical)
Creator: Li-Ta Lo <ollie@lanl.gov> auto.c and failover.c convert mainboard auto.c and failover.c to post DOM era git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1976 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-11-15- Don't force spew level debug messages on the kherpiEric Biederman
- optimize_link_read_pointers compiles now on the solo so don't disable it. - Start sorting out the confusion between and object and an initobject on the ppc ports - Major bugfix release of romcc to support to remove preprocessor deficiencies. The line and column numbers are computed are now correct. But watch out the error messages sometimes report the location of the next token so things are still a little skewed. git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1784 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-11-04- Update abuild.sh so it will rebuild successfull buildsEric Biederman
- Move pci_set_method out of hardwaremain.c - Re-add debugging name field but only include the CONFIG_CHIP_NAME is enabled. All instances are now wrapped in CHIP_NAME - Many minor cleanups so most ports build. git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1737 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-25make log message a little prettierLi-Ta Lo
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1479 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-24drop obsolete CONNECTION_x_y macros. Use row information instead.Stefan Reinauer
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1472 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-24small step to clean up mainboard directories. debug.c was basically identicalStefan Reinauer
on all amd64 motherboards, so it moved to the amdk8 specific code. git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1470 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-19adapt to 1.1.6Stefan Reinauer
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1445 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-11- Moved hlt() to it's own header.Eric Biederman
- Reworked pnp superio device support. Now complete superio support is less than 100 lines. - Added support for hard coding resource assignments in Config.lb - Minor bug fixes to romcc - Initial support for catching the x86 processor BIST error codes. I've only seen this trigger once in production during a very suspcious reset but... - added raminit_test to test the code paths in raminit.c for the Opteron - Removed the IORESOURCE_SET bit and added IORESOURCE_ASSIGNED and IORESOURCE_STORED so we can tell what we have really done. - Added generic AGP/IOMMU setting code to x86 - Added an implementation of memmove and removed reserved identifiers from memcpy - Added minimal support for booting on pre b3 stepping K8 cores - Moved the checksum on amd8111 boards because our default location was on top of extended RTC registers - On the Hdama added support for enabling i2c hub so we can get at the temperature sensors. Not that i2c bus was implemented well enough to make that useful. - Redid the Opteron port so we should only need one reset and most of memory initialization is done in cpu_fixup. This is much, much faster. - Attempted to make the VGA IO region assigment work. The code seems to work now... - Redid the error handling in amdk8/raminit.c to distinguish between a bad value and a smbus error, and moved memory clearing out to cpufixup. - Removed CONFIG_KEYBOARD as it was useless. See pc87360/superio.c for how to setup a legacy keyboard properly. - Reworked the register values for standard hardware, moving the defintions from chip.h into the headers of the initialization routines. This is much saner and is actually implemented. - Made the hdama port an under clockers BIOS. I debuged so many interesting problems. - On amd8111_lpc added setup of architectural/legacy hardware - Enabled PCI error reporting as much as possible. - Enhanded build_opt_tbl to generate a header of the cmos option locations so that romcc compiled code can query the cmos options. - In romcc gracefully handle function names that degenerate into function pointers - Bumped the version to 1.1.6 as we are getting closer to 2.0 TODO finish optimizing the HT links of non dual boards TODO make all Opteron board work again TODO convert all superio devices to use the new helpers TODO convert the via/epia to freebios2 conventions TODO cpu fixup/setup by cpu type git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-09go verbose for now!Stefan Reinauer
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1389 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-11-04infrastructure updates to keep linuxbios building (needed for quartet)Stefan Reinauer
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1252 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-10-24retightening khepri after last hdama changesStefan Reinauer
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1230 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-09-25khepri resource map update to keep compatibility chainStefan Reinauer
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1129 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-09-23update hypertransport setup for khepriStefan Reinauer
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1124 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-09-01- Updates to config.g so that it works more reliably and has initial supportEric Biederman
for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc - Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc killed src/sdram/generic_dump_spd.inc killed src/sdram/generic_dump_spd.inc - Updated the arima/hdama to build with the new configuration system - Updated config.g to list all of the variables with make echo git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1093 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-08-28add first bunch of newisys khepri files.Stefan Reinauer
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1090 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 06:45:48 +0000