summaryrefslogtreecommitdiff
path: root/src/mainboard/msi
AgeCommit message (Collapse)Author
2012-07-31Revert "remove CONFIG_SERIAL_CPU_INIT"Sven Schnelle
This reverts commit 78efc4c36c68b51b3e73acdb721a12ec23ed0369. The broadcast patch was reverted, so this commit should also be reverted. The reason for reverting the broadcast patch: It turned out that sending IPIs via broadcast doesn't work on Sandybridge. We tried to come up with a solution, but didn't found any so far. So revert the code for now until we have a working solution. Change-Id: I05c27dec55fa681f455215be56dcbc5f22808193 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1380 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-26Drop mainboard chip.hStefan Reinauer
mainboard_config never worked right, at least not since we've had sconfig. Hence, drop mainboard/<vendor>/<device>/chip.h and fix up the mainboards that tried to use it anyways. Change-Id: I7cd403ea188d8a9fd4c1ad15479fa88e02ab8e83 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1359 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-12Drop Kconfig VAR_MTRR_HOLE optionKyösti Mälkki
All but one board use the default value of enabled. Disabling this can only increase the number of MTRR registers used. Change-Id: I7d28adc31b9fae2301e4ff78fcb96486f81d5ec2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1213 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-02remove CONFIG_SERIAL_CPU_INITSven Schnelle
The new broadcast code doesn't support serial init - if a CPU needs serial init, this should be handled in the model specific CPU init code. Change-Id: I7cafb0af10d712366819ad0849f9b93558e9d46a Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1140 Tested-by: build bot (Jenkins)
2012-05-08Clean up #ifsPatrick Georgi
Replace #if CONFIG_FOO==1 with #if CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*1[[:space:]]*\$,#if \1," {} + Replace #if (CONFIG_FOO==1) with #if CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*(\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*1)[[:space:]]*\$,#if \1," {} + Replace #if CONFIG_FOO==0 with #if !CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*0[[:space:]]*\$,#if \!\1," {} + Replace #if (CONFIG_FOO==0) with #if !CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*(\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*0)[[:space:]]*\$,#if \!\1," {} + (and some manual changes to fix false positives) Change-Id: Iac6ca7605a5f99885258cf1a9a2473a92de27c42 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1004 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Martin Roth <martin@se-eng.com>
2012-04-27Move top level pc80 directory to drivers/Stefan Reinauer
There is no reason for this to be a top level directory. Some stuff from lib/ should also be moved to drivers/ Change-Id: I3c2d2e127f7215eadead029cfc7442c22b26814a Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/939 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-20Refactor some alignment handlingPatrick Georgi
Made using coccinelle: @@ expression E; @@ -(E + 7) & -8 +ALIGN(E, 8) @@ expression E; @@ -(E + 15) & -16 +ALIGN(E, 16) Change-Id: I071d2c98cd95580d7de21d256c31b6368a3dc70b Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/910 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-03-08Unify Local APIC address definitionsPatrick Georgi
We used several names for that same value, and hardcoded the value at some more places. They're all LOCAL_APIC_ADDR now (except for lapic specific code that still uses LAPIC_DEFAULT_BASE). Change-Id: I1d4be73b1984f22b7e84681edfadf0588a7589b6 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/676 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-22ACPI: More ../../.. removalPatrick Georgi
CPP is ran with src/ as part of its search path, so using <northbridge/...> and the like is safe. Change-Id: I644d60190ac92ef284d5f0b4acf44f7db3c788ee Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/649 Tested-by: build bot (Jenkins)
2012-02-22Remove old AMD fam10 fixme commentMarc Jones
The family10 code had a very slow decompress before the cache settings were fixed. This has been fixed for some time. Remove all the old messages from the serial stream. Change-Id: I476efe1a430f702af394734f354ff69bd053f1d2 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/672 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-02-17nvidia/mcp55: Move HAVE_HARD_RESET to southbridgePatrick Georgi
No in-tree board using that chipset has it not selected, so move selection from boards to southbridge. Change-Id: Ibfb7b294aa5007ac2f767d85e090572f85148bad Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/659 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2012-02-17broadcom/bcm5785: Move HAVE_HARD_RESET to southbridgePatrick Georgi
No in-tree board using that chipset has it not selected, so move selection from boards to southbridge. Change-Id: Id95660f088c8240606d45abf326cd5eefca30da3 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/658 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2012-02-17nvidia/ck804: Move HAVE_HARD_RESET to southbridgePatrick Georgi
No in-tree ck804-using board has it not selected, so move selection from boards to southbridge. Change-Id: I3064b406cfd5ad18067c597bd5b5866a720f7e87 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/657 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-17Remove whitespace.Patrick Georgi
Fix issues reported by new lint test. Change-Id: I077a829cb4a855cbb3b71b6eb5c66b2068be6def Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/646 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-09Remove no-op Makefiles under mainboard directoryKyösti Mälkki
Patch removes following files: src/mainboard/amd/serengeti_cheetah/Makefile.inc src/mainboard/amd/serengeti_cheetah_fam10/Makefile.inc src/mainboard/broadcom/blast/Makefile.inc src/mainboard/hp/dl145_g1/Makefile.inc src/mainboard/msi/ms9282/Makefile.inc src/mainboard/supermicro/h8dme/Makefile.inc src/mainboard/tyan/s2881/Makefile.inc src/mainboard/tyan/s2892/Makefile.inc src/mainboard/via/epia-m700/Makefile.inc Change-Id: I020776313abff1772be38afc896af51ca5ab6453 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/612 Tested-by: build bot (Jenkins) Reviewed-by: Kerry Sheh <shekairui@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-07Delete hard-coded driver includesKyösti Mälkki
Driver components are conditionally included in the build using the Kconfig options. Change-Id: I05417ee263a5b82e947600482dfb68f7a3f52d58 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/610 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-01-18Unify ID_SECTION_OFFSET and mark it deprecatedPatrick Georgi
We used to put the id section at -0x10, with some boards overriding this to avoid collisions with romstraps. Hardcode the location at -0x80, at the possible expense of some space (0x70 bytes). This also makes the section easier to find in a binary image. At some point, CONFIG_ID_SECTION_OFFSET can be removed, so this option is moved to src/Kconfig.deprecated_options. Change-Id: I6ce2d6e94e57717939bda070bfe0c9df80ca2a89 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/549 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2011-11-01remove trailing whitespaceStefan Reinauer
Change-Id: Ib91889a374515d36a2b12b53aeb12b6ea6e22732 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/364 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-10-30remove usbdebug.h include from mainboard/romstage codeSven Schnelle
No romstage is supposed to use usbdebug functions/defines directly, so remove all those includes. The usb code is now called and setup from console code. Change-Id: I9b1120d96f5993303d6b302accc86e14a91f7a9f Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/354 Tested-by: build bot (Jenkins)
2011-10-28Get rid of the old romstage-as-bootblock ROM layoutPatrick Georgi
This change removes CONFIG_TINY_BOOTBLOCK, CONFIG_BIG_BOOTBLOCK, and all their uses, assuming TINY_BOOTBLOCK=y, BIG_BOOTBLOCK=n. This might break a couple of boards on runtime, but so far, fixes were quite simple. There's a flag day: Code that relies on CONFIG_TINY_BOOTBLOCK must be adapted. Change-Id: I1e17a4a1b9c9adb8b43ca4db8aed5a6d44d645f5 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/320 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-13Use default table creator macro for all SSDTsStefan Reinauer
Change-Id: I0c138ebfdc6d4d5ae7d3512b0dd68df20485690e Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/262 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-13mptable: Refactor mptable generation some morePatrick Georgi
The last couple of lines of every mptable function were mostly identical. Refactor into common code, a new function mptable_finalize. Coccinelle script: @@ identifier mc; @@ ( -mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); -mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); -printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); -return smp_next_mpe_entry(mc); +return mptable_finalize(mc); | -mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); -mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); -return smp_next_mpe_entry(mc); +return mptable_finalize(mc); ) Change-Id: Ib2270d800bdd486c5eb49b328544d36bd2298c9e Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/246 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-13mptable: Get rid of fixup_virtual_wirePatrick Georgi
As stated in some code files, fixup_virtual_wire was established to avoid touching 200 invocations of the mptable code. Let Coccinelle do it: @@ type T; identifier v; @@ -void fixup_virtual_wire(T v) -{ ... } @@ expression A; identifier v; @@ -v = smp_write_floating_table(A); +v = smp_write_floating_table(A, 0); @@ expression A; identifier v; @@ -v = smp_write_floating_table(A, 0); -fixup_virtual_wire(v); +v = smp_write_floating_table(A, 1); Change-Id: Icad8a063380bf4726be7cebb414d13b574112b14 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/245 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-13mptable: Refactor lintsrc generationPatrick Georgi
We copied pretty much the same code for generating mptable entries for local interrupts (with some notable exceptions). This change moves these lines into a generic function "mptable_lintsrc" and makes use of it in many places. The remaining uses of smp_write_lintsrc should be reviewed and replaced by mptable_lintsrc calls where possible, and smp_write_lintsrc made static. This patch was generated using Coccinelle: @@ expression mc; expression isa_bus; @@ -smp_write_lintsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x0, MP_APIC_ALL, 0x0); -smp_write_lintsrc(mc, mp_NMI, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x0, MP_APIC_ALL, 0x1); +mptable_lintsrc(mc, isa_bus); @@ expression mc; expression isa_bus; @@ -smp_write_lintsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, isa_bus, 0x0, MP_APIC_ALL, 0x0); -smp_write_lintsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, isa_bus, 0x0, MP_APIC_ALL, 0x1); +mptable_lintsrc(mc, isa_bus); @m@ identifier mc; expression BUS; @@ -#define IO_LOCAL_INT(type, intr, apicid, pin) smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, BUS, (intr), (apicid), (pin)); ... -IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); -IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); +mptable_lintsrc(mc, BUS); Change-Id: I97421f820cd039f5fd753cb0da5c1cca68819bb4 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/244 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-21Use ACPI text fields consistently with all other boardsStefan Reinauer
LXBIOS and LXB-DSDT are not used in other parts of the tree. Make names consistent across the tree. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Change-Id: I91caeac09fd2401a36e53bd061d249b236a48e43 Reviewed-on: http://review.coreboot.org/224 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2011-08-06ms7135: add ACPI supportJonathan A. Kollasch
Change-Id: I64a74d3dc0ea2d006ed4b25657d531fb243c2993 Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/140 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-08-04Add voltage control of southbridge and RAM on ms7135Jonathan A. Kollasch
Change-Id: I5d79b4838f69cad56d58363608b801f8b1d3ab43 Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/126 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-08-03Remove debugging code, or convert it to be selected by kconfigJonathan A. Kollasch
Change-Id: Ib6cd82badeb6401e065ee14c2a04c78f61a87dd4 Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/130 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-08-03Use preferred style of fixed-width integer typesJonathan A. Kollasch
Change-Id: I1abaaa2af4de940584039f9b8c348bb57fb611e0 Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/125 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Peter Stuge <peter@stuge.se>
2011-04-20run uart_init() from console_init, just like the other console ↵Stefan Reinauer
initialization functions. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6531 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-18* Set USBDEBUG_DEFAULT_PORT in all southbridges and use that valueStefan Reinauer
to unify calls to *_enable_usbdebug() * rename *_enable_usbdebug() to enable_usbdebug() * move enable_usbdebug() to generic romstage console init code and drop it from the individual romstage.c files. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6513 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-10In 2007 Adrian Reber suggested that we drop ASSEMBLY in favor of __ASSEMBLER__.Stefan Reinauer
http://www.coreboot.org/pipermail/coreboot/2007-September/024665.html It's about time we follow this advice. Also move some manually set __PRE_RAM__ defines (ap_romstage.c) to the Makefile and drop unused CPP define Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6482 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-08Enable mahogany_fam10 and Kino family 10h to run the SB HT link at the ↵Scott Duplichan
expected HT3 frequency and width by matching the BUID swap list to the production BIOS. In addition, the BUID swap list has been moved into the project-specific file romstage.c for the other 13 AMD family 10h projects as well. For projects using a desktop AMD family 10h processor, pasting in the mahogany_fam10 swap list will likely allow HT3 operation. This should be confirmed on real hardware before commiting any swap list change. A different swap list will be needed for server projects. For serengeti_cheetah_fam10, a reference BIOS swap list to try is: 0x00, 0x0A, 0x00, 0x06, 0xFF, 0x0A, 0x06, 0xFF. The patch makes these changes: 1) Remove the BUID swap list from ht_wrapper.c and put it in each of 15 romstage.c files where it is used (AMD family 10h projects). 2) Add a prototype to amdfam10.h. 3) Modify the swap list and test in real hardware for mahogany_fam10 and kino family 10h and confirm HT3 operation for the SB link. Abuild tested. Signed-off-by: Scott Duplichan <sc...@notabs.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6439 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-03Configure PCIe lanes on ms7135 as original BIOS does.jakllsch
Signed-off-by: <jakllsch@kollasch.net> Acked-by: <jakllsch@kollasch.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6428 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-01Use subsystem id from devicetree.cb instead of Kconfig and moveSven Schnelle
all boards to the new config scheme. Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6421 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-26Make AMD Fam10h CPU microcode updates optional in Expert modeXavi Drudis Ferran
Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6385 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-19The same mechanisms are used for normal and fallback images. Stefan Reinauer
Hence drop the FALLBACK_ prefix Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6204 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-17Remove some more unused/incorrect hda_verb.h files.Uwe Hermann
As discussed on the mailing list at http://www.coreboot.org/pipermail/coreboot/2010-December/062393.html http://www.coreboot.org/pipermail/coreboot/2010-December/062510.html Someone who owns these boards should create correct files at some point. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6196 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-17drop one more version of doing serial uart output differently.Stefan Reinauer
coreboot made it kind of complicated to print a character on serial. Not quite as complicated as UEFI, but too much for a good design. Fix it. Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6191 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-16Get mptable OEM/product ID from kconfig variables.Uwe Hermann
We currently use "COREBOOT" unconditionally as the "OEM ID" in our mptable.c files, and hardcode the mainboard name in mptable.c like this: mptable_init(mc, "DK8-HTX ", LAPIC_ADDR); However, the spec says "OEM ID: A string that identifies the manufacturer of the system hardware." (Table 4-2, page 42) so "COREBOOT" doesn't match the spec, we should use the hardware vendor name. Thus, use CONFIG_MAINBOARD_VENDOR which we have already as the "OEM ID" (truncate/fill it to 8 characters as per spec). Also, use CONFIG_MAINBOARD_PART_NUMBER (the board name) as "product ID", and truncate/fill it to 12 characters as per spec, if needed. Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6183 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-15Build fix.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6181 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-15Cleanup up HD audio codec / hda_verb.h files.Uwe Hermann
Most of the current hda_verb.h files are identical (same MD5 sum) and are intended for a specific MCP55 board with the Realtek ALC880 audio codec, which has the vendor/device ID of 0x10ec0880. They were splitted out from the MCP55 southbridge code and put into board dirs a long time ago (which is correct, as those settings are indeed board-specific), but they were never adapted to those boards. Here's the table of which codec is soldered onto which board, based on checking the vendor website board spec pages, and the board manuals: - GIGABYTE GA-M57SLI-S4: Realtek ALC883 - MSI MS-7260: Realtek ALC883 - MSI MS-9652: Realtek ALC888 - MSI MS-9282: Server board, doesn't have audio at all - Tyan S2912: Server board, doesn't have audio at all - All Supermicro boards: Server boards, don't have audio at all - NVIDIA l1_2pvv: No public info to be found, but I assume this was the original MCP55 eval board for the port and it's probably has the Realtek ALC880 codec used in the original hda_verb.h. These are the codec vendor device/IDs involved: Realtek ALC880: 0x10ec0880 Realtek ALC883: 0x10ec0883 Realtek ALC888: 0x10ec0888 The following files are marked as incorrect / TODO, as the ID of the codec doesn't match and thus will never get actually used (you'll see "HDA: no verb!" or similar in the coreboot logs). Even if the ID matched, the rest of the table would be incorrect anyway because the values are highly board-specific. ./src/mainboard/gigabyte/m57sli/hda_verb.h ./src/mainboard/msi/ms9652_fam10/hda_verb.h ./src/mainboard/msi/ms9282/hda_verb.h The following files can be safely dropped as these are server boards and don't have HD audio (or other audio) at all: ./src/mainboard/supermicro/h8dmr/hda_verb.h ./src/mainboard/supermicro/h8qme_fam10/hda_verb.h ./src/mainboard/supermicro/h8dme/hda_verb.h ./src/mainboard/supermicro/h8dmr_fam10/hda_verb.h ./src/mainboard/tyan/s2912/hda_verb.h ./src/mainboard/tyan/s2912_fam10/hda_verb.h The following two are correct and can stay: ./src/mainboard/nvidia/l1_2pvv/hda_verb.h ./src/mainboard/getac/p470/hda_verb.h Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6180 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-13no leading zeroes.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6177 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-08Move "select CACHE_AS_RAM" lines from boards into CPU socket.Uwe Hermann
All K8/Fam10h boards use CAR, so move the "select CACHE_AS_RAM" into the socket directories, and remove it from the individual boards. Do the same for Intel CPUs/sockets where all boards use CAR. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6151 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-08second round name simplification. drop the <component>_ prefix.stepan
the prefix was introduced in the early v2 tree many years ago because our old build system "newconfig" could not handle two files with the same name in different paths like /path/to/usb.c and /another/path/to/usb.c correctly. Only one of the files would end up being compiled into the final image. Since Kconfig (actually since shortly before we switched to Kconfig) we don't suffer from that problem anymore. So we could drop the sb700_ prefix from all those filenames (or, the <componentname>_ prefix in general) - makes it easier to fork off a new chipset - makes it easier to diff against other chipsets - storing redundant information in filenames seems wrong Signed-off-by: <stepan@coresystems.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6150 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-08first round name simplification. drop the <component>_ prefix.stepan
the prefix was introduced in the early v2 tree many years ago because our old build system "newconfig" could not handle two files with the same name in different paths like /path/to/usb.c and /another/path/to/usb.c correctly. Only one of the files would end up being compiled into the final image. Since Kconfig (actually since shortly before we switched to Kconfig) we don't suffer from that problem anymore. So we could drop the sb700_ prefix from all those filenames (or, the <componentname>_ prefix in general) - makes it easier to fork off a new chipset - makes it easier to diff against other chipsets - storing redundant information in filenames seems wrong Signed-off-by: <stepan@coresystems.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6149 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-07Get rid of some unneeded function prototypes in romstage.c files.Uwe Hermann
Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6147 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-06Winbond W83627HF: Use existing functions instead of open-coding.Uwe Hermann
Use w83627hf_set_clksel_48() where needed instead or open-coding the same functionality, and also use w83627hf_enable_serial() instead of w83627hf_enable_dev() (which does exactly the same, but isn't wrapped in the enter/exit config mode functions). Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6143 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-05W83627DHG/W83627EHG fixups for virtual LDNs.Uwe Hermann
W83627DHG: - Add proper "virtual LDN" handling for the LDNs that need it (i.e., those that don't have their "enable" bit in bit 0 of the 0x30 register). - Fix various I/O masks in the pnp_dev_info[] array as per datasheet. Add missing PNP_IRQ0 to the W83627DHG_ACPI LDN. W83627EHG: - Similar to W83627DHG, improve the "virtual LDN" setup a bit (it was mostly implemented already, though). - Add missing PNP_IRQ0 to the W83627EHG_ACPI LDN. Also: Fix up devicetree.cb of all boards using W83627DHG/W83627EHG to adapt for the virtual LDNs. include/device/pnp.h: Add comment that 'function' (which refers to the LDN and should probably be renamed later) has to be at least 16 bits wide. In theory LDNs could use u8, but due to the virtual LDN info being encoded in the "high byte" of 'function' it must be at least u16. asrock/939a785gmh/romstage.c: Drop unused GPIO6_DEV. ibase/mb899/romstage.c: Use DUMMY_DEV instead of a specific LDN (serial port 1 in this case) to avoid confusion. The global registers manipulated there are accessible from any LDN. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6140 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-28devicetree.cb: Only add as many entries as there are DIMM slots.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6129 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-26Broadcom BCM5785: Add TINY_BOOTBLOCK support.Uwe Hermann
In bcm5785_enable_rom(): Use PCI IDs from pci_ids.h instead of hardcoding, and use 'dev' instead of 'addr' as device_t variable name. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6126 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-25MCP55: Add TINY_BOOTBLOCK support.Uwe Hermann
Also, move CONFIG_HT_CHAIN_END_UNITID_BASE #ifdef block to mcp55.h to make the build work (but this is a good idea anyway, as it's used in multiple files). Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6123 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-22Printing coreboot debug messages on VGA console is pretty much useless, sinceStefan Reinauer
initializing VGA happens pretty much as the last thing before starting the payload. Hence, drop VGA console support, as we did in coreboot v3. - Drop VGA and BTEXT console support. Console is meant to be debugging only, and by the time graphics comes up 99% of the risky stuff has already happened. Note: This patch does not remove hardware init but only the actual output functionality. The ragexl driver needs some extra love, but that's for another day - factor out die() and post() - drop some leftover RAMBASE < 0x100000 checks. Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: QingPei Wang<wangqingpei@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6111 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-21Simplify a few code chunks, fix whitespace and indentation.Uwe Hermann
Also, remove some less useful comments, some dead code / unused functions. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6108 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-21Drop excessive whitespace randomly sprinkled in romstage.c files.Uwe Hermann
Also drop some dead or useless code snippets. Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6107 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-21Convert more boards to use mptable_write_buses.Patrick Georgi
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6106 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-21Move MCP55_PCI_E_X_* to Kconfig. Any useless values in romstage.cs werePatrick Georgi
not brought over to Kconfig (this applies to all #defines to 4, as that's the default anyway) Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6104 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-21Use DIMM0 et al in lots more places instead of hardocding values.Uwe Hermann
The (0xa << 3) expression equals 0x50, i.e. DIMM0. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6103 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-20Merge all spd_addr.h into the resp. romstage.c files.Uwe Hermann
Except for one instance the spd_addr.h were now very tiny, there's not much point in keeping that stuff in an extra file. The only user of those files is the romstage.c file anyway. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6101 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-20Some more DIMM0 related cleanups and deduplication.Uwe Hermann
- VIA VT8235: Do the shift in smbus_read_byte() as all other chipsets do. - spd.h: Move RC00-RC63 #defines here, they were duplicated in lots of romstage.c files and lots of spd_addr.h files. Don't even bother for those spd_addr.h which aren't even actually used, drop them right away. - Replace various 0x50 hardcoded numbers with DIMM0, 0x51 with DIMM1, and 0xa0 with (DIMM0 << 1) where appropriate. - Various debug.c files: Replace SMBUS_MEM_DEVICE_START with DIMM0, SMBUS_MEM_DEVICE_END with DIMM7, and drop useless SMBUS_MEM_DEVICE_INC. - VIA VX800: Drop unused SMBUS_ADDR_CH* #defines. - VIA VT8623: Do the shift in smbus_read_byte() as all other chipsets do. Then, replace 0xa0 (which now becomes 0x50) with DIMM0. - alix1c/romstage.c, alix2d/romstage.c: Adapt to recent bit shift changes. - Various files: Drop DIMM_SPD_BASE and/or replace it with DIMM0. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6100 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-20Unify DIMM SPD addressing. For Geode, change thePatrick Georgi
addressing scheme to match the rest of the tree (0x50 instead of 0xa0). abuild tested. Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6099 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-18Drop unused and incorrect RTC_DEV for Winbond W83627EHG.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6094 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-18Eliminate SET_NB_CFG_54 option. There was no board thatPatrick Georgi
deselected it, and very likely there won't ever be any hardware that requires it deselected. Keep the "selected" code path around, leading to no functional change. Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Scott Duplichan <scott@notabs.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6086 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-16Drop W83627THF, it's the same device as W83627THG.Uwe Hermann
The only difference is that the "G" version is in a Pb-free package, which is not relevant from a programmer's view. We keep W83627THG (and drop W83627THF) because: - The W83627THF had a CIR device / LDN which doesn't actually exist. - The W83627THF had no GPIO2, GPIO3 LDNs (were commented out). - The W83627THF didn't use the PNP_MSC0/1 which is needed/used by boards. This also fixes an issue on MSI MS7135's devicetree.cb: device pnp 4e.6 off end # XXX keep allocator happy The line above can be (and is) removed, as it was only needed due to the incorrect CIR LDN in the W83627THF. In the iwill/dk8x target: Drop incorrect LDNs 4 and 6, add 0xb. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6080 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-16Drop commented out debug definesPatrick Georgi
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6079 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-16Move the SET_FIDVID* family of configuration options to Kconfig andPatrick Georgi
make their defaults more obvious. Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6077 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-14CK804/MCP55 devicetree.cb cosmetic and indentation fixes.Uwe Hermann
Add a few more comments for the entries, and also change the devicetree.cb files to the more compact and better readable variant with indentation level of 2 spaces (instead of random mix of tabs and spaces). Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6071 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-07Move K8_ALLOCATE_IO_RANGE to Kconfig.Patrick Georgi
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6036 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-06Remove comments that are obsolete since r6028.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6029 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-05Move QRANK_DIMM_SUPPORT to Kconfig, removing it from romstage.cPatrick Georgi
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6028 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-05Various PIRQ/MPTABLE/ACPI Kconfig fixes.Uwe Hermann
- Use HAVE_ACPI_TABLES, HAVE_MP_TABLE, and HAVE_PIRQ_TABLE (instead of GENERATE_*) in the board's Kconfig file, as all other boards do. - Add missing HAVE_ACPI_TABLES/HAVE_MP_TABLE/HAVE_PIRQ_TABLE to boards which have the respective files. The only exception: EPIA-M700 doesn't select ACPI, as it doesn't have dsdt.asl. Added a comment that the user is supposed to run the 'get_dsdt' script and edit Kconfig afterwards. - Fix minor warning/error in src/mainboard/msi/ms9652_fam10/acpi_tables.c, now that the file is actually used. - msi/ms9652_fam10: use #include instead of Include() as we usually do now. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6027 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-27Drop referenced-yet-does-nothing static function from ms7135 romstage.Jonathan Kollasch
Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net> Acked-by: Jonathan Kollasch <jakllsch@kollasch.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5995 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-27Convert ck804_early_smbus.c to a separately compiled unit.Jonathan Kollasch
Additionally, make the second SMBus more accessible in romstage. Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5994 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-26We need to call smp_write_lintsrc() instead of smp_write_intsrc() forTobias Diedrich
local ints. This is wrong in most coreboot mptables, probably all generated by util/mptable/mptable.c. After fixing this now XP can boot in MPS mode on my M2V. Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5992 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-26Convert all ck804-based boards to tiny bootblock.Jonathan Kollasch
Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5991 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-26Move bcm5785_enable_rom.c include to where it's used.Patrick Georgi
Right now, it breaks the build of bootblock enabled boards with that chipset. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5990 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-25Factor out common mptable code to mptable_init().Uwe Hermann
- Drop sig[], oem[], and productid[] fields in all mptable.c files, no longer needed. The sig[] is always the same ("PCMP"), the oem[] is currently also always the same ("COREBOOT"), and productid is being passed into mptable_init() directly as string now. - LAPIC_ADDR is passed in as parameter, too. While at the moment it's always the same value that is passed in, the LAPIC base address could also be relocated theoretically, so keep it as parameter for now. - Fix a few productid entries, they were (partially) incorrect: - DK8S2 (was "DK8X", copypaste) - 939A785GMH (was "MAHOGANY", copypaste) - X6DHE-G (was "X6DHE", incomplete board name) - H8DME-2 (was "H8DMR", copypaste) - H8QME-2+ (was "H8QME", incomplete board name) - X6DHE-G2 (was "X6DHE", incomplete board name) - X6DHR-iG2 (was "X6DHR-iG", incomplete board name) - GA-M57SLI-S4 (was "M57SLI", incomplete board name) - KINO-780AM2 (was "KINO", incomplete board name) - DL145 G1 (was "DL145G1", small fix as per vendor website) - DL145 G3 (was "TREX", wrong board name) - DL165 G6 (was "HP DL165 G6", drop vendor) - S2912 (was "S2895", copypaste) - VT8454c (was "VIA VT8454C", drop vendor, lower-case "c") - EPIA-N (was "P4DPE", copypaste) - pc2500e (was "PC2500", incorrect name) - S1850 (was "S2850", copy-paste) - MS-7135 (was "MS7135") - MS-9282 (was "MS9282") - MS-9185 (was "MS9185") - MS-9652 (was "K9ND MS-9652") - Ultra 40 (was "ultra40") - E326 (was "E325", copypaste) - M4A785-M (was "TILAPIA", copypaste) - P2B-D (was "ASUS P2B-D", drop vendor) - P2B-DS (was "ASUS P2B-DS", drop vendor) - Adapt the mptable utility to use mptable_init() too. Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5987 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-19Drop duplicate SB_HT_CHAIN_ON_BUS0 in Kconfig for MS-7135.Jonathan Kollasch
Trivial. Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net> Acked-by: Jonathan Kollasch <jakllsch@kollasch.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5975 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-19Use the correct (W83627THF, not W83627HF) superio code in MS-7135 romstage.Jonathan Kollasch
This is consistent with the device tree and the chip actually on the board. Trivial. Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net> Acked-by: Jonathan Kollasch <jakllsch@kollasch.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5974 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-19Use mptable_write_buses().Jonathan Kollasch
Remove unhelpful comment. Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5970 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-19Modernize socket_754 Kconfig with CAR and address bits information.Jonathan Kollasch
Also, update the board that uses this socket to match. Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5969 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-13Remove various .c #includes from Intel i810/i82801ax/i82801bx boards.Uwe Hermann
This is pretty much the same mechanism as in r5929. - Use 'romstage-y' to turn i82801ax_early_smbus.c and i82801bx_early_smbus.c into distinct compilation units, and don't #include the files anymore in romstage.c files. - Ditto for northbridge/intel/i82810/raminit.c, and northbridge/intel/i82810/debug.c. - Add various header files which are now needed, drop unused includes. - Make functions that need to be visible non-static. Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5951 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-13Convert all Intel i810 boards to CAR.Uwe Hermann
- Drop "select ROMCC" from the boards, as well as early_mtrr stuff. - Add "select CACHE_AS_RAM" to socket_PGA370/Kconfig, as well as the usual DCACHE_RAM_BASE and DCACHE_RAM_SIZE variables. - In socket_PGA370/Makefile.inc add: cpu_incs += $(src)/cpu/intel/car/cache_as_ram.inc - Other smaller related fixes. Abuild-tested and boot-tested on MSI MS-6178. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5949 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-09Remove various .c #includes from Intel 440BX/82371EB boards.Uwe Hermann
- Use 'romstage-y' to turn i82371eb_early_pm.c and i82371eb_early_smbus.c into distinct compilation units, and don't #include the files anymore in romstage.c files. - Ditto for lib/debug.c, northbridge/intel/i440bx/raminit.c, and northbridge/intel/i440bx/debug.c. - Add various header files which are now needed. - Make functions that need to be visible non-static. - Drop a remaining "select ROMCC" from a 4440BX board. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Idwer Vollering <vidwer@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5929 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-07Remove duplicate line from pci_ids.h.Jonathan Kollasch
Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net> Acked-by: Jonathan Kollasch <jakllsch@kollasch.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5920 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-07Convert all Intel 82371AB/EB/MB based boards to TINY_BOOTBLOCK.Uwe Hermann
Also: Unfortunately Intel 440BX + 82371AB/EB/MB boards can have their ISA device on various PCI bus:device.function locations. Examples we encountered: 00:07.0, 00:04.0, or 00:14.0. Thus, instead of hardcoding PCI bus:device.function numbers such as PCI_DEV(0, 7, 0), we now simply find the ISA device via PCI IDs, which works the same on all boards. As an additional benefit this patch also gets rid of one .c file include in romstage.c. Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5918 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-06Convert all Intel 440BX boards to Cache-as-RAM (CAR).Uwe Hermann
- Add "select CACHE_AS_RAM" in src/cpu/intel/slot_1/Kconfig. - Add the following in src/cpu/intel/slot_1/Makefile.inc: cpu_incs += $(src)/cpu/intel/car/cache_as_ram.inc - Remove "select ROMCC" from all 440BX board Kconfig files. - Drop all early_mtrr_init() calls, that's done by CAR code now. Various small fixes were needed to make it build: - Drop do_smbus_recv_byte(), do_smbus_send_byte(), do_smbus_write_byte(), those were never called anyways. - Remove the "static" from the main() functions in romstage.c files. - Always call dump_spd_registers() from the 440BX debug.c, but use "#if CONFIG_DEBUG_RAM_SETUP" to only have that code if RAM debugging is enabled in menuconfig. - Drop all "lib/ramtest.c" #includes and ram_check() calls (even if commented out) from romstage.c's, as we've done for most other boards. - Add missing #includes or prototypes. Some of the prototypes will be removed later when we get rid of the #include'd .c files. Abuild-tested for all boards, and boot-tested on A-Trend ATC-6220. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5917 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-05attached patch moves a couple more config flags out of romstage:Patrick Georgi
CK804_USE_NIC, CK804_USE_ACI, CK804_NUM. MCP55_USE_NIC, MCP55_USE_ACI, MCP55_NUM. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> Acked-by: Pter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5912 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-05- move EHCI_BAR_INDEX to ehci.h - it's constant as per EHCI spec 2.3.1Patrick Georgi
- move EHCI_BAR and EHCI_DEBUG_OFFSET to Kconfig to be set by USB debug port enabled southbridges - drop USB debug code includes from romstage.cs and use romstage-srcs in the build system instead Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5911 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-05Remove lib/ramtest.c-include from all CAR boards.Patrick Georgi
Remove many more .c-includes from i945 based boards. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5910 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-02Don't define K8_4RANK_DIMM_SUPPORT, nothing uses it.Jonathan Kollasch
All these boards define QRANK_DIMM_SUPPORT anyway, which is probably what was meant. Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5905 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-01Move CACHE_AS_RAM_ADDRESS_DEBUG out of romstage.c into Kconfig,Patrick Georgi
rename it slightly, make it visible only on relevant northbridges, drop it entirely from via boards (as they seem to have picked it up from AMD code without using it themselves), and make it default to false for all boards. Some romstages used to set this to "true" (ie. "print debug output"), but I didn't follow up on it in Kconfig - if you need it to debug CAR, enable it yourself. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5898 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-30Rename build system variables to be more intuitive, andPatrick Georgi
at the same time let the user specify sources instead of object files: - objs becomes ramstage-srcs - initobjs becomes romstage-srcs - driver becomes driver-srcs - smmobj becomes smm-srcs The user servicable parts are named accordingly: ramstage-y, romstage-y, driver-y, smm-y Also, the object file names are properly renamed now, using .ramstage.o, .romstage.o, .driver.o, .smm.o suffixes consistently. Remove stubbed out via/epia-m700 dsdt/ssdt files - they didn't easily fit in the build system and aren't useful anyway. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coreystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5886 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-28Remove redundant HW_MEM_HOLE_SIZEK and HW_MEM_HOLE_SIZE_AUTO_INC settings.Myles Watson
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5875 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-27Add a kconfig option to allow the user to select a specific physicalUwe Hermann
USB port for use as Debug Port (on chipsets which support that). Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5860 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-25Drop some useless "../../../" in #includes (trivial).Uwe Hermann
Build-tested using abuild. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5844 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-21Cut the crap.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5823 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-10Move memory type information out of some AMD sockets.Myles Watson
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5800 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-30We call this cache as ram everywhere, so let's call it the same in KconfigStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Myles Watson <mylesgw@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5756 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-30Restructured all vendors' Kconfig files to no longer source the boards'Jens Rottmann
Kconfigs from within the choice/endchoice block. This makes it possible to define user visible board specific options. Moved all vendor names and PCI ids to the vendors' Kconfigs. Now all options in each file depend on the same symbol, so replaced all "depends on"s with a single "if". Sorted boards (sort -d), cleaned whitespace. This patch also introduces a dummy option BOARD_SPECIFIC_OPTIONS, which is always "y" and never used. It it simply needed to have something to attach the boards' "select" statements to. Signed-off-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5754 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 01:11:39 +0000