summaryrefslogtreecommitdiff
path: root/src/mainboard/msi
AgeCommit message (Expand)Author
2010-03-18Remove remaining uses ofPatrick Georgi
2010-03-18Rework boolean expression (DeMorgan and all) forPatrick Georgi
2010-03-18Remove fallback/normal handling in mainboards'Patrick Georgi
2010-03-17Remove failover/fallback/normal handling in mainboards'Patrick Georgi
2010-03-17trivial warning fixes, mostly for ACPI codeStefan Reinauer
2010-03-13Use CPU_INTEL_SLOT_1 for Slot 1 boards (trivial).Uwe Hermann
2010-03-11Replace clear_memory with memset.Myles Watson
2010-03-08Remove Kconfig entries that disablePatrick Georgi
2010-03-05This patch is from 2009-10-20Uwe Hermann
2010-03-01Whitespace changes to make s2912_fam10/ms9652_fam10 more similar.Uwe Hermann
2010-03-01Various cometic and coding-style fixes (trivial).Uwe Hermann
2010-03-01Add msi/ms9652_fam10 board.Timothy Pearson
2010-02-28- Add config flag for boards that have their own fadt.cPatrick Georgi
2010-02-27- make HAVE_HARD_RESET match what newconfig didPatrick Georgi
2010-02-27This does the following:Stefan Reinauer
2010-02-25Move the ldscripts logic to src/arch/i386/Makefile.incPatrick Georgi
2010-02-25Unify crt0s setup to src/arch/i386/Makefile.inc. This variablePatrick Georgi
2010-02-23Only handle code as "driver" that actually uses our driverPatrick Georgi
2010-02-23Adjust msi/ms7135 DCACHE_RAM_* config to previous 32KiB values,Jonathan A. Kollasch
2010-02-15Various license header consistency fixes (trivial).Uwe Hermann
2010-02-11$(DISTRO_CFLAGS) is newconfig heritage and was never used on Kconfig. We doStefan Reinauer
2010-02-09Move all the copies of the romstage.inc rule toPatrick Georgi
2010-02-08Clean up ACPI:Patrick Georgi
2010-02-08straighten naming scheme for application processor rom stage files.Stefan Reinauer
2010-02-08janitor task: unify and cleanup naming.Stefan Reinauer
2010-02-07newconfig is no more.Patrick Georgi
2010-01-30ifeq wants a space before the (Stefan Reinauer
2010-01-30* fix crt0s/ldscripts paths to fix out of tree build.Stefan Reinauer
2010-01-25Fix ACPI build on a couple of boards (now that it's active)Patrick Georgi
2010-01-25More Kconfig changes to improve match with newconfig:Patrick Georgi
2010-01-25Align several kconfig options to match newconfig:Patrick Georgi
2010-01-18Move all IOAPIC selection to southbridges, and remove themPatrick Georgi
2010-01-05* Explicitly add __PRE_RAM__ where it should be added.Stefan Reinauer
2009-12-02Trivial fixes for kconfig. They fix all non-fam10 build failures.Myles Watson
2009-11-27Eliminate special case id.inc/id.lds in favor of a configuration variable ID_...Patrick Georgi
2009-11-27Make newconfig and kconfig agree on MAINBOARD_PCI_SUBSYSTEM_{VENDOR,DEVICE}_IDPatrick Georgi
2009-11-06Remove drivers/pci/onboard. The only purpose was for option ROMs, which areMyles Watson
2009-11-06Drop all pre-CBFS rom_address entries in Config.lb/devicetree.cb.Uwe Hermann
2009-11-06Split the two usages of __ROMCC__:Myles Watson
2009-10-30Allow per-northbridge and per-board VGA BIOS file name and PCI ID defaults.Uwe Hermann
2009-10-28Fix some builds with Kconfig.Myles Watson
2009-10-26cp src/mainboard/tyan/Makefile.k8_CAR.inc to src/mainboard/Makefile.k8_ck804.incMyles Watson
2009-10-26Move src/mainboard/tyan/Makefile.s289x.inc to src/mainboard/Makefile.k8_CAR.inc.Myles Watson
2009-10-26Add kconfig menus for most chipset VIDEO_MB values.Uwe Hermann
2009-10-26Define some variables that were not defined. There are a couple left.Myles Watson
2009-10-24Major cleanups of the hard_reset() code and config in coreboot.- supermicro/x6dhe_g/auto.c
2009-10-24move all register fram definitions to arch/register.hStefan Reinauer
2009-10-23Drop dead K8_SCAN_PCI_BUS code. It's a bad idea to scan the PCI busses beforeMyles Watson
2009-10-20Remove CONFIG_CPU_AMD_FAM10 & CONFIG_CPU_AMDK8 from mainboards. They should beMyles Watson
2009-10-20Fix all board names in Kconfig as per wiki / vendor website.Uwe Hermann
2009-10-17Move files from src/cpu/x86/{fpu,mmx,sse}/ to x86/Peter Stuge
2009-10-16Fix AP_CODE_IN_CAR (only selected for two boards), STACK_SIZE, and HEAP_SIZE.Myles Watson
2009-10-16Drop enable_mmx.inc. It reads (only) "Enabling mmx registers is a noop"Peter Stuge
2009-10-16Set default ROM sizes per-board to match the ROM chip that cameUwe Hermann
2009-10-16Change CONFIG_LB_MEM_TOPK to CONFIG_RAMTOP to match CONFIG_RAMBASE.Myles Watson
2009-10-15Add CONFIG_GENERATE_* for tables so that the user can select which tables notMyles Watson
2009-10-13Add support for the MSI MS-6156 board.Uwe Hermann
2009-10-07Major CONFIG_IRQ_TABLE_COUNT fixing and cleanups. Some of these boardsUwe Hermann
2009-10-07Fix trivial typo in Kconfig spotted by Peter, introduced by me.Patrick Georgi
2009-10-07Convert all "default y" options to "select FOO" (shorter).Uwe Hermann
2009-10-07Kconfig:Patrick Georgi
2009-10-06UseUwe Hermann
2009-10-05PCI_ROM_RUN and CONSOLE_VGA are global options in Kconfig andUwe Hermann
2009-10-04The new CBFS based build system requires the whole ROM to be accessibleUwe Hermann
2009-10-04This does away with CONFIG_ROM_PAYLOAD_START and CONFIG_PAYLOAD_SIZE.Patrick Georgi
2009-10-03Remove:Patrick Georgi
2009-10-03Remove duplicate and not too useful Kconfig board comments asUwe Hermann
2009-09-23simplify source tree hierarchy: move files from sdram/ and ram/ to lib/Stefan Reinauer
2009-08-28Add kconfig support for all Intel 82810 (i810) boards.Uwe Hermann
2009-08-26Add kconfig support for all missing Intel 440BX based boards.Uwe Hermann
2009-08-25Replace PIRQ_TABLE with HAVE_PIRQ_TABLE, the former doesn't exist.Uwe Hermann
2009-08-25Various Kconfig and Makefile.inc fixes and cosmetics.Uwe Hermann
2009-08-19Reduce size of the romstage on various boards that fail to build on QA.Patrick Georgi
2009-08-12Kconfig!Patrick Georgi
2009-08-11Enable CBFS everywhere. All boards compiled for me (abuild tested),Patrick Georgi
2009-07-11Fix MS-6178 boot by setting unused device (CIR) to 'off' (trivial).Uwe Hermann
2009-07-05Enable onboard VGA on the MS-6178 (i810 chipset) board (trivial).Uwe Hermann
2009-06-30the tool chain settings should not be in renamed (as they will never live inStefan Reinauer
2009-06-30This patch unifies the use of config options in v2 to all start with CONFIG_Stefan Reinauer
2009-06-19Undo my ugly commit that added uses clauses in lots of places instead of one.Myles Watson
2009-06-19Convert the MSI MS-6178 board to CBFS.Uwe Hermann
2009-06-17Fix configuration of boards that didn't have uses CONFIG_USE_INIT. Trivial.Myles Watson
2009-06-06When I started refactoring mainboard Config.lb, I added two differentCarl-Daniel Hailfinger
2009-06-03Revert "CMOS: Add set_option and rework get_option."Luc Verhaegen
2009-06-03CMOS: Add set_option and rework get_option.Luc Verhaegen
2009-05-29enable/disable IDE 0/1 (Primary/Secondary) interfaces on the i82801xx southbr...Joseph Smith
2009-05-02Run dos2unix on all files:Stefan Reinauer
2009-04-30Refactor copy_and_run so that it uses a single code base instead ofPatrick Georgi
2009-04-22drop duplicate compiler options that are already mentioned in CFLAGS.Stefan Reinauer
2009-04-22no duplicate names in cmos.layout allowed. (fixes a bunch of boards)Stefan Reinauer
2009-04-21Thanks to Myles' patch adding support for include statements,Carl-Daniel Hailfinger
2009-04-14v2/src romfs->cbfs renamePeter Stuge
2009-04-13I need to do uses HAVE_ACPI_RESUME for each board. Here we go.Rudolf Marek
2009-04-12This patch cleans up the calls to $CC in mainboard Config.lb files. TheyCarl-Daniel Hailfinger
2009-04-11Kill remaining unneeded CAR/ROMCC if-blocks.Carl-Daniel Hailfinger
2009-04-03Fix up the incomplete commit in r4055.Carl-Daniel Hailfinger
2009-04-03There are more than a dozen targets in the v2 tree which refer to ROMCCCarl-Daniel Hailfinger
2009-04-01Drop CONFIG_CHIP_NAME. Those config statements in Config.lb shouldStefan Reinauer
2009-03-31Add the CONFIG_ROMS config variable. Ronald G. Minnich
2009-02-18Carl-Daniel's part:Carl-Daniel Hailfinger