| Age | Commit message (Expand) | Author |
|---|
| 2010-01-05 | * Explicitly add __PRE_RAM__ where it should be added. | Stefan Reinauer |
| 2009-12-02 | Trivial fixes for kconfig. They fix all non-fam10 build failures. | Myles Watson |
| 2009-11-27 | Eliminate special case id.inc/id.lds in favor of a configuration variable ID_... | Patrick Georgi |
| 2009-11-27 | Make newconfig and kconfig agree on MAINBOARD_PCI_SUBSYSTEM_{VENDOR,DEVICE}_ID | Patrick Georgi |
| 2009-11-06 | Remove drivers/pci/onboard. The only purpose was for option ROMs, which are | Myles Watson |
| 2009-11-06 | Drop all pre-CBFS rom_address entries in Config.lb/devicetree.cb. | Uwe Hermann |
| 2009-11-06 | Split the two usages of __ROMCC__: | Myles Watson |
| 2009-10-30 | Allow per-northbridge and per-board VGA BIOS file name and PCI ID defaults. | Uwe Hermann |
| 2009-10-28 | Fix some builds with Kconfig. | Myles Watson |
| 2009-10-26 | cp src/mainboard/tyan/Makefile.k8_CAR.inc to src/mainboard/Makefile.k8_ck804.inc | Myles Watson |
| 2009-10-26 | Move src/mainboard/tyan/Makefile.s289x.inc to src/mainboard/Makefile.k8_CAR.inc. | Myles Watson |
| 2009-10-26 | Add kconfig menus for most chipset VIDEO_MB values. | Uwe Hermann |
| 2009-10-26 | Define some variables that were not defined. There are a couple left. | Myles Watson |
| 2009-10-24 | Major cleanups of the hard_reset() code and config in coreboot. | - supermicro/x6dhe_g/auto.c |
| 2009-10-24 | move all register fram definitions to arch/register.h | Stefan Reinauer |
| 2009-10-23 | Drop dead K8_SCAN_PCI_BUS code. It's a bad idea to scan the PCI busses before | Myles Watson |
| 2009-10-20 | Remove CONFIG_CPU_AMD_FAM10 & CONFIG_CPU_AMDK8 from mainboards. They should be | Myles Watson |
| 2009-10-20 | Fix all board names in Kconfig as per wiki / vendor website. | Uwe Hermann |
| 2009-10-17 | Move files from src/cpu/x86/{fpu,mmx,sse}/ to x86/ | Peter Stuge |
| 2009-10-16 | Fix AP_CODE_IN_CAR (only selected for two boards), STACK_SIZE, and HEAP_SIZE. | Myles Watson |
| 2009-10-16 | Drop enable_mmx.inc. It reads (only) "Enabling mmx registers is a noop" | Peter Stuge |
| 2009-10-16 | Set default ROM sizes per-board to match the ROM chip that came | Uwe Hermann |
| 2009-10-16 | Change CONFIG_LB_MEM_TOPK to CONFIG_RAMTOP to match CONFIG_RAMBASE. | Myles Watson |
| 2009-10-15 | Add CONFIG_GENERATE_* for tables so that the user can select which tables not | Myles Watson |
| 2009-10-13 | Add support for the MSI MS-6156 board. | Uwe Hermann |
| 2009-10-07 | Major CONFIG_IRQ_TABLE_COUNT fixing and cleanups. Some of these boards | Uwe Hermann |
| 2009-10-07 | Fix trivial typo in Kconfig spotted by Peter, introduced by me. | Patrick Georgi |
| 2009-10-07 | Convert all "default y" options to "select FOO" (shorter). | Uwe Hermann |
| 2009-10-07 | Kconfig: | Patrick Georgi |
| 2009-10-06 | Use | Uwe Hermann |
| 2009-10-05 | PCI_ROM_RUN and CONSOLE_VGA are global options in Kconfig and | Uwe Hermann |
| 2009-10-04 | The new CBFS based build system requires the whole ROM to be accessible | Uwe Hermann |
| 2009-10-04 | This does away with CONFIG_ROM_PAYLOAD_START and CONFIG_PAYLOAD_SIZE. | Patrick Georgi |
| 2009-10-03 | Remove: | Patrick Georgi |
| 2009-10-03 | Remove duplicate and not too useful Kconfig board comments as | Uwe Hermann |
| 2009-09-23 | simplify source tree hierarchy: move files from sdram/ and ram/ to lib/ | Stefan Reinauer |
| 2009-08-28 | Add kconfig support for all Intel 82810 (i810) boards. | Uwe Hermann |
| 2009-08-26 | Add kconfig support for all missing Intel 440BX based boards. | Uwe Hermann |
| 2009-08-25 | Replace PIRQ_TABLE with HAVE_PIRQ_TABLE, the former doesn't exist. | Uwe Hermann |
| 2009-08-25 | Various Kconfig and Makefile.inc fixes and cosmetics. | Uwe Hermann |
| 2009-08-19 | Reduce size of the romstage on various boards that fail to build on QA. | Patrick Georgi |
| 2009-08-12 | Kconfig! | Patrick Georgi |
| 2009-08-11 | Enable CBFS everywhere. All boards compiled for me (abuild tested), | Patrick Georgi |
| 2009-07-11 | Fix MS-6178 boot by setting unused device (CIR) to 'off' (trivial). | Uwe Hermann |
| 2009-07-05 | Enable onboard VGA on the MS-6178 (i810 chipset) board (trivial). | Uwe Hermann |
| 2009-06-30 | the tool chain settings should not be in renamed (as they will never live in | Stefan Reinauer |
| 2009-06-30 | This patch unifies the use of config options in v2 to all start with CONFIG_ | Stefan Reinauer |
| 2009-06-19 | Undo my ugly commit that added uses clauses in lots of places instead of one. | Myles Watson |
| 2009-06-19 | Convert the MSI MS-6178 board to CBFS. | Uwe Hermann |
| 2009-06-17 | Fix configuration of boards that didn't have uses CONFIG_USE_INIT. Trivial. | Myles Watson |
| 2009-06-06 | When I started refactoring mainboard Config.lb, I added two different | Carl-Daniel Hailfinger |
| 2009-06-03 | Revert "CMOS: Add set_option and rework get_option." | Luc Verhaegen |
| 2009-06-03 | CMOS: Add set_option and rework get_option. | Luc Verhaegen |
| 2009-05-29 | enable/disable IDE 0/1 (Primary/Secondary) interfaces on the i82801xx southbr... | Joseph Smith |
| 2009-05-02 | Run dos2unix on all files: | Stefan Reinauer |
| 2009-04-30 | Refactor copy_and_run so that it uses a single code base instead of | Patrick Georgi |
| 2009-04-22 | drop duplicate compiler options that are already mentioned in CFLAGS. | Stefan Reinauer |
| 2009-04-22 | no duplicate names in cmos.layout allowed. (fixes a bunch of boards) | Stefan Reinauer |
| 2009-04-21 | Thanks to Myles' patch adding support for include statements, | Carl-Daniel Hailfinger |
| 2009-04-14 | v2/src romfs->cbfs rename | Peter Stuge |
| 2009-04-13 | I need to do uses HAVE_ACPI_RESUME for each board. Here we go. | Rudolf Marek |
| 2009-04-12 | This patch cleans up the calls to $CC in mainboard Config.lb files. They | Carl-Daniel Hailfinger |
| 2009-04-11 | Kill remaining unneeded CAR/ROMCC if-blocks. | Carl-Daniel Hailfinger |
| 2009-04-03 | Fix up the incomplete commit in r4055. | Carl-Daniel Hailfinger |
| 2009-04-03 | There are more than a dozen targets in the v2 tree which refer to ROMCC | Carl-Daniel Hailfinger |
| 2009-04-01 | Drop CONFIG_CHIP_NAME. Those config statements in Config.lb should | Stefan Reinauer |
| 2009-03-31 | Add the CONFIG_ROMS config variable. | Ronald G. Minnich |
| 2009-02-18 | Carl-Daniel's part: | Carl-Daniel Hailfinger |
| 2009-01-20 | This patch makes the recently added assembler debug optional, as it may | Stefan Reinauer |
| 2008-12-22 | Fix implicit declarations of get_bus_conf. | Carl-Daniel Hailfinger |
| 2008-12-22 | In the process of trying to debug some HT sync problems I added lots of | Carl-Daniel Hailfinger |
| 2008-12-10 | Use -O2 and -mcpu=p2 as romcc options for all Intel 440BX boards. | Uwe Hermann |
| 2008-11-28 | This patch from Ralf Grosse Boerger makes debugging more comfortable. | Stefan Reinauer |
| 2008-11-27 | Remove the unnecessary memctrl[] indirection, 440BX only has one | Uwe Hermann |
| 2008-11-20 | Get rid of the unnecessary indirection by 'struct mem_controller' for the | Uwe Hermann |
| 2008-11-11 | Always enable serial before SMBus (or as early as possible), as the SMBus | Uwe Hermann |
| 2008-10-27 | Add initial support for the MSI MS-6147 mainboard. | Mats Erik Andersson |
| 2008-10-12 | Drop tons of duplicated debug.c files, move common file to | Uwe Hermann |
| 2008-10-01 | The ARRAY_SIZE macro is convenient, yet mostly unused. Switch lots of | Carl-Daniel Hailfinger |
| 2008-09-29 | AMD K8 platforms must use CAR so it makes sense to use the PRINK_IN_CAR | Marc Jones |
| 2008-09-04 | This changes the python generated makefiles | Carl-Daniel Hailfinger |
| 2008-05-06 | Fix various issues on MSI MS-7135 board. | Jonathan A. Kollasch |
| 2008-03-17 | Add support for the MSI MS-6119 mainboard. | Uwe Hermann |
| 2008-02-20 | Initial support for MSI MS-7135 (K8N Neo3) mainboard. | Jonathan A. Kollasch |
| 2008-01-26 | This patch fixes the remaining stack protector problem on v2. The DISTRO_CFLA... | Ronald G. Minnich |
| 2008-01-18 | Rename almost all occurences of LinuxBIOS to coreboot. | Stefan Reinauer |
| 2008-01-18 | Please bear with me - another rename checkin. This qualifies as trivial, no | Stefan Reinauer |
| 2007-12-09 | This adds the same line (uses CONFIG_PRECOMPRESSED_PAYLOAD) to every | Myles Watson |
| 2007-11-08 | Fix up totally broken Super I/O config on the MS-6178. Add | Uwe Hermann |
| 2007-10-17 | Fix up totally broken Super I/O setup on the MSI MS-7260 (K9N Neo). | Uwe Hermann |
| 2007-09-21 | Fix abuild for the MSI MS-7260 (trivial). | Uwe Hermann |
| 2007-09-21 | Add support for the MSI MS-7260 (K9N Neo) mainboard. | Uwe Hermann |
| 2007-09-13 | Fix abuild run of the MSI MS-6178 (trivial). | Uwe Hermann |
| 2007-09-13 | Add a common/global failover.c file which can be used by all | Uwe Hermann |
| 2007-09-12 | Add initial support for the Intel 810 based board MSI MS-6178. | Uwe Hermann |
| 2007-04-12 | add uses CONFIG_COMPRESSED_PAYLOAD_* to allow building the board in | Stefan Reinauer |
| 2007-02-19 | Fix some CHIP_NAME() entries to use canonical names. | Uwe Hermann |
| 2007-02-17 | Fix typo (trivial). | Uwe Hermann |
| 2007-02-09 | Add support for the MSI K9ND Master Series (ms9282) board. | Bingxun Shi |
| 2006-12-15 | Apply linuxbios-rename-other-payload-options.patch | Ed Swierk |
