| Age | Commit message (Collapse) | Author |
|---|
|
MSI PRO Z690-A WIFI DDR4 and MSI PRO Z690-A DDR4 are basically the
same boards, except the latter has no WiFi populated. Check the CNVi
WiFi presence and return correct SMBIOS product name string.
TEST=Check SMBIOS product name on both WiFi and non-WiFi variants in
Linux.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I5fedbce413dfb6a589a406d1e34e3e114ca6a40f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68078
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the comments about port designation after mapping the root hub
ports to board connectors. Add macros reflecting the length of the
USB signal traces.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ib2e842ef240ab25e2a9f7fa2e0766206fde7943d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64295
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
Add board connectors and headers descriptions to SMBIOS. Specify
type 1 and type 2 fields as in vendor firmware.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ie64be21ff302274769b77550c29e58d4ea1376d1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64050
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the full PCIe root port configuration. Proper initialization of
the root ports depends on the correct GPIO programming including
virtual wires. Do not program the CLKREQ signals in coreboot to let FSP
detect and configure CLKREQ pads. Otherwise the CLKREQ pads are
reprogrammed by FSP despite having GpioOverride=1. The pads that
should not be touched by coreboot are left commented in the board GPIO
file. CLKREQ reprogramming caused undefined behavior when ASPM and
Clock PM was being enabled by coreboot on PCIe endpoints of CPU PCIe
x4 slot (coreboot printed a lot of exceptions and simply halted).
TEST=Boot the MSI PRO Z690-A DDR4 WiFi with all PCIe/M.2 slots
populated and check if they are detected and functional in Linux.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I50199d2caf54509a72c5100acb770bf766327e7f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63656
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Based on the output of:
- inteltool from CB:63374
- intelp2m from CB:63403
TEST=Build coreboot binary for msi/ms7d5 and boot the board.
Change-Id: If37eaf875f8fcfc64299227744a8c40d304a0214
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63490
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
Initial mainboard code MSI PRO Z690-A DDR4 WIFI. The platform boots up
up to romstage where it returns from FSP memory init with an error.
What works:
- open-source CAR setup
- NCT6687D serial port with TX pin exposed on JBD1 header
- SMBus reading SPD from all 4 DIMMs
This board will serve as a reference board for enabling Alder Lake-S
support in coreboot. More code and functionalities will be added in
subsequent patches as src/soc/alderlake code will be improved for
PCH-S.
TEST=Extract the microcode from vendor firmware and include it in the
build. The platform should print the console on the serial port even
without FSP blob.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I5df69822dbb3ff79e087408a0693de37df2142e8
Signed-off-by: Igor Bagnucki <igor.bagnucki@3mdeb.com>
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63463
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
