| Age | Commit message (Collapse) | Author |
|---|
|
RISC-V is moving towards OpenFirmware-derived device trees, and the old
functions to read the config string don't work anymore. Use dummy values
for the memory base and size until we can query the device tree.
Change-Id: Ice13feae4da2085ee56bac4ac2864268da18d8fe
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/21690
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: I9147eca0b536b6267d58f6e8baa37b6950b35160
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/17710
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: Ic1706ae8ab3cbef8f445d70cb78fa9d3301d87be
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/17707
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Note that currently, traps are only handled by the trap handler
installed in the bootblock. The romstage and ramstage don't override it.
TEST=Booted emulation/spike-qemu and lowrisc/nexys4ddr with a linux
payload. It worked as much as before (Linux didn't boot, but it
made some successful SBI calls)
Change-Id: Icce96ab3f41ae0f34bd86e30f9ff17c30317854e
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/17057
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Ron's code calculated the DLL and DLM registers of the 8250 UART, but
that's the job of the UART driver. uart_input_clock_divider isn't needed
anymore because the default value of 16 works.
As a bonus, the baud rate can now be selected in Kconfig, instead of
being hardcoded at 115200.
TEST=Booted the board at 9600 and 115200 baud.
Change-Id: I3d5e49568b798a6a6d944db1161def7d0a2d3b48
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/17188
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
This was tested at the coreboot meeting in Berlin.
The uart programming may still not be right but when used with
the lowrisc bitstream for the board we were able to load
and start linux, although it does not yet get far due to
PTE version issues with lowrisc.
Change-Id: Ia1de1a92762631c9d7bb3d41b04f95296144caa3
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/17132
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
