summaryrefslogtreecommitdiff
path: root/src/mainboard/lowrisc/nexys4ddr
AgeCommit message (Collapse)Author
2018-04-27RISC-V boards: Remove PAGETABLES section from memlayout.ldJonathan Neuschäfer
RISC-V doesn't set up page tables anymore, since commit b26759d703 ("arch/riscv: Don't set up virtual memory"). Change-Id: Id1e759b63fb0bc88ab256994d3849d16814affa0 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/25701 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-11-07RISC-V boards: Stop using the config stringJonathan Neuschäfer
RISC-V is moving towards OpenFirmware-derived device trees, and the old functions to read the config string don't work anymore. Use dummy values for the memory base and size until we can query the device tree. Change-Id: Ice13feae4da2085ee56bac4ac2864268da18d8fe Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21690 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-12-06mb/lowrisc/nexys4ddr: Read RAM information from the config stringJonathan Neuschäfer
Change-Id: I9147eca0b536b6267d58f6e8baa37b6950b35160 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/17710 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-12-06mb/lowrisc/nexys4ddr: Initialize CBMEM in romstageJonathan Neuschäfer
Change-Id: Ic1706ae8ab3cbef8f445d70cb78fa9d3301d87be Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/17707 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-11-07riscv: Unify SBI call implementations under arch/riscv/Jonathan Neuschäfer
Note that currently, traps are only handled by the trap handler installed in the bootblock. The romstage and ramstage don't override it. TEST=Booted emulation/spike-qemu and lowrisc/nexys4ddr with a linux payload. It worked as much as before (Linux didn't boot, but it made some successful SBI calls) Change-Id: Icce96ab3f41ae0f34bd86e30f9ff17c30317854e Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/17057 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-11-07mb/lowrisc/nexys4ddr: Actually fix the UART clock setupJonathan Neuschäfer
Ron's code calculated the DLL and DLM registers of the 8250 UART, but that's the job of the UART driver. uart_input_clock_divider isn't needed anymore because the default value of 16 works. As a bonus, the baud rate can now be selected in Kconfig, instead of being hardcoded at 115200. TEST=Booted the board at 9600 and 115200 baud. Change-Id: I3d5e49568b798a6a6d944db1161def7d0a2d3b48 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/17188 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-10-28riscv: add the lowrisc/nexys4ddr mainboardRonald G. Minnich
This was tested at the coreboot meeting in Berlin. The uart programming may still not be right but when used with the lowrisc bitstream for the board we were able to load and start linux, although it does not yet get far due to PTE version issues with lowrisc. Change-Id: Ia1de1a92762631c9d7bb3d41b04f95296144caa3 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/17132 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)