Age | Commit message (Expand) | Author |
2013-06-04 | AMD Northbridge LX: move #include "northbridge/amd/lx/raminit.h" | Christian Gmeiner |
2013-05-30 | AMD Llano, Brazos boards: Use `sizeof(var)` to get its size | Paul Menzel |
2013-05-14 | AMD Brazos/Trinity boards: PlatformGnbPcie.c: Reserve correct amount of memory | Paul Menzel |
2013-05-09 | AMD: Reduce stack size from 64 KB to the default of 4 KB | Paul Menzel |
2013-05-08 | copy_and_run: drop boot_complete parameter | Stefan Reinauer |
2013-04-20 | AMD SB800 based boards: Use `#include <sb_cimx.h>` instead of `"sb_cimx.h"` | Paul Menzel |
2013-04-09 | FrontRunner/Toucan-AF: boards will be renamed to fit ADLINK scheme | Jens Rottmann |
2013-03-22 | FrontRunner/Toucan-AF: Use SPD read code from F14 wrapper | Jens Rottmann |
2013-03-22 | x86: Unify arch/io.h and arch/romcc_io.h | Stefan Reinauer |
2013-03-17 | Lippert Fam14 DSDT: Remove INI method from AZHD device | Mike Loptien |
2013-03-17 | Lippert Fam14 DSDT: Add secondary bus range to PCI0 | Mike Loptien |
2013-03-17 | Lippert Fam14 DSDT: Add OSC method | Mike Loptien |
2013-03-08 | FrontRunner/Toucan-AF: lower SPI speed to 22 MHz | Jens Rottmann |
2013-03-04 | FrontRunner/Toucan-AF: drop unnecessary compile time CPU model selection | Jens Rottmann |
2013-03-03 | AMD Persimmon, LiPPERT Fam14: Fix typo code*c* in comment | Paul Menzel |
2013-03-02 | FrontRunner/Toucan-AF: work around AGESA RAM init crashing on reboot | Jens Rottmann |
2013-03-02 | LiPPERT Toucan-AF [2/2]: actually implement mainboard support | Jens Rottmann |
2013-03-02 | LiPPERT Toucan-AF [1/2]: create board by forking AMD Persimmon | Jens Rottmann |
2013-03-02 | LiPPERT FrontRunner-AF [2/2]: actually implement mainboard support | Jens Rottmann |
2013-03-02 | LiPPERT FrontRunner-AF [1/2]: create board by forking AMD Persimmon | Jens Rottmann |
2013-03-01 | GPLv2 notice: Unify all files to just use one space in »MA 02110-1301« | Paul Menzel |
2013-02-25 | mainboard.c: Name enable_dev function uniformly `mainboard_enable` | Paul Menzel |
2013-02-14 | sconfig: rename lapic_cluster -> cpu_cluster | Stefan Reinauer |
2013-02-14 | sconfig: rename pci_domain -> domain | Stefan Reinauer |
2013-02-09 | romcc: Use default romcc flags for most boards | Patrick Georgi |
2012-11-29 | Drop empty mainboard.c | Kyösti Mälkki |
2012-11-29 | Drop empty mainboard_ops | Kyösti Mälkki |
2012-11-16 | Fix PIRQ routing abstraction | Stefan Reinauer |
2012-11-06 | Drop redundant CHIP_NAME in mainboard.c | Kyösti Mälkki |
2012-07-26 | Drop mainboard chip.h | Stefan Reinauer |
2012-07-26 | amd/lx: Move configuration from source to Kconfig | Patrick Georgi |
2012-02-13 | AMD Geode cpus: apply un-written naming rules | Kyösti Mälkki |
2012-01-07 | Update geode GX2 tree to match LX. | Nils Jacobs |
2011-04-20 | run uart_init() from console_init, just like the other console initialization... | Stefan Reinauer |
2011-04-11 | Unify use of post_code | Alexandru Gagniuc |
2010-12-29 | -Change the remaining GLIU1 port 5 register names from VIP (Video Input Port) | Nils Jacobs |
2010-12-08 | second round name simplification. drop the <component>_ prefix. | stepan |
2010-12-08 | first round name simplification. drop the <component>_ prefix. | stepan |
2010-11-22 | Drop per-board ram_check() calls for now. | Uwe Hermann |
2010-11-21 | Simplify a few code chunks, fix whitespace and indentation. | Uwe Hermann |
2010-11-21 | Drop excessive whitespace randomly sprinkled in romstage.c files. | Uwe Hermann |
2010-11-21 | Use DIMM0 et al in lots more places instead of hardocding values. | Uwe Hermann |
2010-11-20 | Unify DIMM SPD addressing. For Geode, change the | Patrick Georgi |
2010-11-05 | Add Kconfig CPU speed selection to Geode GX2 boards. | Nils Jacobs |
2010-11-05 | GX2: Define the unused DIMM1 to 0xFF to make it obvious it is a bogus value. | Nils Jacobs |
2010-11-01 | Change Geode GX2 to use the auto DRAM detect code from Geode LX. | Nils Jacobs |
2010-10-13 | Enable or disable the power button in Kconfig | Peter Stuge |
2010-10-05 | Remove lib/ramtest.c-include from all CAR boards. | Patrick Georgi |
2010-09-27 | I missed these boards in a previous commit. | Warren Turkal |
2010-09-27 | All these boards already had the CACHE_AS_RAM option in their individual | Warren Turkal |
2010-09-25 | Drop some useless "../../../" in #includes (trivial). | Uwe Hermann |
2010-09-21 | Cut the crap. | Uwe Hermann |
2010-09-10 | Add support for LiPPERT Hurricane-LX (EPIC board with AMD Geode-LX, | Jens Rottmann |
2010-09-07 | Add support for LiPPERT Cool LiteRunner-LX (PC/104 board with AMD | Jens Rottmann |
2010-09-07 | Set up an arbitrary amount of system memory on Geode LX, so | Aurelien Guillaume |
2010-09-03 | Update RoadRunner and SpaceRunner config to get in sync with current | Jens Rottmann |
2010-08-31 | SMC_CONFIG is needed before the device tree is ready and some people | Jens Rottmann |
2010-08-30 | We call this cache as ram everywhere, so let's call it the same in Kconfig | Stefan Reinauer |
2010-08-30 | Restructured all vendors' Kconfig files to no longer source the boards' | Jens Rottmann |
2010-08-26 | Remove unused mainboard_config definitions. Trivial. | Myles Watson |
2010-08-26 | CONFIG_DEBUG_RAM_SETUP and CONFIG_DEBUG_SMBUS are only available if the board / | Jens Rottmann |
2010-08-03 | Drop the USE_PRINTK_IN_CAR option. It's a bogus decision to make for any user / | Stefan Reinauer |
2010-07-28 | Let Geode GX2 use geode_post_code.h just like Geode LX | Nils Jacobs |
2010-07-26 | This patch converts the Geode GX2 boards to CAR. | Nils Jacobs |
2010-07-06 | Re-integrate "USE_OPTION_TABLE" code. | Edwin Beasant |
2010-06-10 | This commit updates the Geode LX GLCP delay control setup from the v2 way to ... | Edwin Beasant |
2010-06-01 | CONFIG_DEBUG is too generic. Remove it and replace it with CONFIG_DEBUG_SMBUS | Myles Watson |
2010-05-25 | Move CS5535 specific setup from GX2 driver to CS5535. | Stefan Reinauer |
2010-05-09 | Remove pc80/serial.c includes in ROMCC boards and include | Patrick Georgi |
2010-05-08 | Drop console/console.c and pc80/serial.c from mainboards' | Patrick Georgi |
2010-05-05 | Rename "apic" and "apic_cluster" to "lapic" and "lapic_cluster" | Patrick Georgi |
2010-04-27 | Since some people disapprove of white space cleanups mixed in regular commits | Stefan Reinauer |
2010-04-22 | fix compilation remaining geode boards | Stefan Reinauer |
2010-04-21 | * clean up all but two warnings on artecgroup dbe61 | Stefan Reinauer |
2010-04-08 | Replace dual_core and quad_core CMOS (nvram) options with multi_core. Fix so... | Myles Watson |
2010-04-01 | -Â get rid of ASM_CONSOLE_LOGLEVEL except in two assembler files. | Stefan Reinauer |
2010-03-31 | Drop \r\n and \n\r as both print_XXX and printk now do this internally. | Stefan Reinauer |
2010-03-31 | This patch drops arch/i386/lib/console.c and arch/i386/lib/console_print.c and | Stefan Reinauer |
2010-03-30 | drop USE_INIT from mainboard Kconfig files, it's already set in src/Kconfig | Stefan Reinauer |
2010-03-29 | This drops the ASSEMBLY define from romstage.c, too | Stefan Reinauer |
2010-03-29 | __PRE_RAM__ is now correctly specified in the Makefile. No need to hack it into | Stefan Reinauer |
2010-03-22 | printk_foo -> printk(BIOS_FOO, ...) | Stefan Reinauer |
2010-02-27 | - make HAVE_HARD_RESET match what newconfig did | Patrick Georgi |
2010-02-25 | Move the ldscripts logic to src/arch/i386/Makefile.inc | Patrick Georgi |
2010-02-25 | Unify crt0s setup to src/arch/i386/Makefile.inc. This variable | Patrick Georgi |
2010-02-23 | Only handle code as "driver" that actually uses our driver | Patrick Georgi |
2010-02-09 | Move all the copies of the romstage.inc rule to | Patrick Georgi |
2010-02-08 | janitor task: unify and cleanup naming. | Stefan Reinauer |
2010-02-07 | fix further build.h dependencies that were undetected before we enabled it on | Stefan Reinauer |
2010-02-07 | newconfig is no more. | Patrick Georgi |
2010-02-04 | Move CAR settings for all GX1, GX2, LX and Intel Slot2 boards to the CPU. | Stefan Reinauer |
2010-01-30 | * fix crt0s/ldscripts paths to fix out of tree build. | Stefan Reinauer |
2010-01-25 | Align several kconfig options to match newconfig: | Patrick Georgi |
2010-01-16 | coreboot used to have two different "APIs" for memory accesses: | Stefan Reinauer |
2010-01-05 | * Explicitly add __PRE_RAM__ where it should be added. | Stefan Reinauer |
2009-10-24 | Major cleanups of the hard_reset() code and config in coreboot. | - supermicro/x6dhe_g/auto.c |
2009-10-20 | Fix all board names in Kconfig as per wiki / vendor website. | Uwe Hermann |
2009-10-17 | Move files from src/cpu/x86/{fpu,mmx,sse}/ to x86/ | Peter Stuge |
2009-10-16 | Set default ROM sizes per-board to match the ROM chip that came | Uwe Hermann |
2009-10-15 | Add CONFIG_GENERATE_* for tables so that the user can select which tables not | Myles Watson |