summaryrefslogtreecommitdiff
path: root/src/mainboard/lenovo
AgeCommit message (Collapse)Author
2012-10-08hpet: common ACPI generationPatrick Georgi
HPET's min ticks (minimum time between events to avoid losing interrupts) is chipset specific, so move it to Kconfig. Via also has a special base address, so move it as well. Apart from these (and the base address was already #defined), the table is very uniform. Change-Id: I848a2e2b0b16021c7ee5ba99097fa6a5886c3286 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1562 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
2012-08-08Cleanup coreboot memory table includesKyösti Mälkki
The includes removed here were previously required for struct lb_memory and lb_add_memory_range(). Change-Id: Ie6c0d4ef55c2225aa709cf3fbad30ff1080e3610 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1391 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2012-07-26Drop mainboard chip.hStefan Reinauer
mainboard_config never worked right, at least not since we've had sconfig. Hence, drop mainboard/<vendor>/<device>/chip.h and fix up the mainboards that tried to use it anyways. Change-Id: I7cd403ea188d8a9fd4c1ad15479fa88e02ab8e83 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1359 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-12Lenovo X60: correct SDHCI write protect polarityJonathan A. Kollasch
Change-Id: I916deffe2c692042f7e54c936902e77770ee69df Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/1205 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-24X60/T60: fix mptable LINT entriesSven Schnelle
They used MP_IRQ_TRIGGER_LEVEL, but it should be MP_IRQ_TRIGGER_EDGE. While at it, uses mptable_lintsrc() instead. Change-Id: Ie71311b8bf865889cf0d8808467df98af4b0132d Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1136 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-05-28Enable USE_OPTION_TABLE for ThinkPad X60Motiejus Jakštys
Without this option bluetooth configuration value in nvram is not consulted properly. It also enables built-in volume control (read-only). Tested on: ThinkPad X60s, 1702. Change-Id: I2fc6bb527c6e086a083e63922d1253eda7d4a36d Signed-off-by: Motiejus Jakštys <desired.mta@gmail.com> Reviewed-on: http://review.coreboot.org/985 Tested-by: build bot (Jenkins) Reviewed-by: Sven Schnelle <svens@stackframe.org>
2012-05-01Drop CONFIG_MAX_PHYSICAL_CPUS on non-AMD boardsStefan Reinauer
CONFIG_MAX_PHYSICAL_CPUS is defined by quite a number of mainboards whithout any code actually using the variable. Hence, drop MAX_PHYSICAL_CPUS from Kconfig for those boards. In the long run we should drop CONFIG_MAX_PHYSICAL_CPUS use completely and make the code dynamic or depend on CONFIG_MAX_CPUS instead. Change-Id: I37dcc74d245ddba5186b96bd82220dacb6f4d323 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/984 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-04-30Rework ACPI CST table generationStefan Reinauer
... in order to unify the Sandybridge and Lenovo implementations currently used in the tree. - use acpi_addr_t in acpigen_write_register() - use acpi_cstate_t for cstate tables (and fix up the x60 and t60) - drop cst_entry from acpigen.h Change-Id: Icb87418d44d355f607c4a67300107b40f40b3b3f Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/943 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2012-04-27SMM: unify mainboard APM command handlersStefan Reinauer
rename from mainboard_apm_cnt to mainboard_smi_apmc to match the function naming scheme of the other handlers. Add prototype for mainboard_smi_sleep (mainboard specific S3 sleep handlers in SMM) that is required by Sandybridge. Change-Id: Ib479397e460e33772d90d9d41dba267e4e7e3008 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/933 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-20Refactor some alignment handlingPatrick Georgi
Made using coccinelle: @@ expression E; @@ -(E + 7) & -8 +ALIGN(E, 8) @@ expression E; @@ -(E + 15) & -16 +ALIGN(E, 16) Change-Id: I071d2c98cd95580d7de21d256c31b6368a3dc70b Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/910 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-03-16Intel northbridge I945: Apply un-written naming rulesKyösti Mälkki
Use NORTHBRIDGE_INTEL_I945 to select the driver directory for build. Use _SUBTYPE_945GC and _SUBTYPE_945GM to define at compile-time which model of I945 the driver is built for. Change-Id: I11b1e0998d0fc28f8946bad4f0989036a9b18af4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/684 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-03-08Unify Local APIC address definitionsPatrick Georgi
We used several names for that same value, and hardcoded the value at some more places. They're all LOCAL_APIC_ADDR now (except for lapic specific code that still uses LAPIC_DEFAULT_BASE). Change-Id: I1d4be73b1984f22b7e84681edfadf0588a7589b6 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/676 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-22ACPI: More ../../.. removalPatrick Georgi
CPP is ran with src/ as part of its search path, so using <northbridge/...> and the like is safe. Change-Id: I644d60190ac92ef284d5f0b4acf44f7db3c788ee Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/649 Tested-by: build bot (Jenkins)
2012-01-31X60/T60: Add option to enable/disable bluetoothSven Schnelle
Change-Id: I9761a8a9a7cc708fe95169cb8b79b413b97ee523 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/598 Tested-by: build bot (Jenkins)
2012-01-31X60: fix dockingSven Schnelle
Fix ordering of power/reset/undock procedure to prevent crashes seen with the old code. Also call dlpc_init() only once. Change-Id: I27d1f42e845fcccde40e6ca5af4a7762edab5d36 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/597 Tested-by: build bot (Jenkins)
2012-01-31mainboard/lenovo/t60, x60: Disable CHECK_SLFRCS_ON_RESUMEPeter Stuge
This makes resume from S3 work. Change-Id: I472baf2fbde46bfac223ce39fc81b8e09849fb7f Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://review.coreboot.org/591 Tested-by: build bot (Jenkins) Reviewed-by: Sven Schnelle <svens@stackframe.org>
2012-01-31northbridge/intel/i945: CHECK_SLFRCS_ON_RESUME Kconfig optionPeter Stuge
Originally brought up by Sven Schnelle in March 2011 http://patchwork.coreboot.org/patch/2801/ http://www.coreboot.org/pipermail/coreboot/2011-March/064277.html On some mainboards it may be neccessary to reset early during resume from S3 if the SLFRCS register indicates that a memory channel is not guaranteed to be in self-refresh. On other mainboards, such as Lenovo X60 and T60, the check always creates false positives, effectively making it impossible to resume. The SLFRCS register is documented on page 197 of Mobile Intel® 945 Express Chipset Family Datasheet Document Number: 309219-006 which is publically available, and the register indicates if a memory channel is guaranteed to be in self-refresh mode (if bit = 1), or that a memory channel *may or may not be* in self-refresh mode (if bit = 0). The register can thus only be used to positively learn that memory is in self-refresh. It is not known for sure that memory is *not* in self-refresh. The register is reset by the PWROK signal, which *should* go low during S3, and go high again when resuming, so it is unsurprising that SLFRCS has already been cleared when we read the register. Sven's measurements of the CKE signal on a ThinkPad shows that memory remains in self-refresh indefinitely, until coreboot re-initializes the memory controller, even when SLFRCS bits were = 0. Boards which require a warm reset when SLFRCS bits are cleared must now explicitly enable the check in the mainboard Kconfig file. This commit selects the new option in all existing i945 mainboards. A follow-up commit will remove the option for ThinkPads. Change-Id: I02320675efb8fde05c371ef243ba5093a4da6d11 Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://review.coreboot.org/590 Tested-by: build bot (Jenkins) Reviewed-by: Sven Schnelle <svens@stackframe.org>
2012-01-31X60/T60: fix default baudrateSven Schnelle
Value required to get 115200 is actually 0, not 5. Change-Id: Id1385822bf2213c035c4f378a72168ed6676ad03 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/592 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2011-12-14Lenovo X60/T60: add first_battery settingSven Schnelle
The EC allows to select the order in which batteries are (dis)charged. Make this setting available to the user. Change-Id: Id2a98192565419dbb53f3a7cf0b2c46b672a3ed8 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/475 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Peter Stuge <peter@stuge.se>
2011-12-01X60/T60: reset baudrate loglevel to sane valuesSven Schnelle
Change-Id: Iaf5861e9db0a41a184da6d2e515e3b9afe0655d6 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/459 Tested-by: build bot (Jenkins)
2011-10-30remove usbdebug.h include from mainboard/romstage codeSven Schnelle
No romstage is supposed to use usbdebug functions/defines directly, so remove all those includes. The usb code is now called and setup from console code. Change-Id: I9b1120d96f5993303d6b302accc86e14a91f7a9f Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/354 Tested-by: build bot (Jenkins)
2011-10-28Get rid of the old romstage-as-bootblock ROM layoutPatrick Georgi
This change removes CONFIG_TINY_BOOTBLOCK, CONFIG_BIG_BOOTBLOCK, and all their uses, assuming TINY_BOOTBLOCK=y, BIG_BOOTBLOCK=n. This might break a couple of boards on runtime, but so far, fixes were quite simple. There's a flag day: Code that relies on CONFIG_TINY_BOOTBLOCK must be adapted. Change-Id: I1e17a4a1b9c9adb8b43ca4db8aed5a6d44d645f5 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/320 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-28T60: remove redundant usbdebug_init call()Sven Schnelle
called from console code, no need to call it here. Change-Id: I4c34f89c82cc2478db8de4e98584e69d7ab0ca82 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/350 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-27X60/T60: enable AHCI modeSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Change-Id: I2166ae9ee9e7e0e431583249f015d130d15fac61 Reviewed-on: http://review.coreboot.org/341 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-25X60: enable Cx power saving modesSven Schnelle
Change-Id: Ib03d9aa77050edde2538b80b32158cb3f0610be6 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/331 Tested-by: build bot (Jenkins)
2011-10-25T60: add _CST tableSven Schnelle
Used by power management code to enable Cx powersaving modes. Change-Id: I02c6b10762245bc48f21a341286236e203421de0 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/322 Tested-by: build bot (Jenkins)
2011-10-25T60: enable C4onC3 modeSven Schnelle
It is safe to enable this setting on these Boards. Change-Id: Iaa7377117743d18a95c496c25abf9fb4a1b20ad9 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/330 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-10-25T60: use ICS954309 clock driverSven Schnelle
Change-Id: I3f30fe601215784e1688c5ec51108dc0cf03e320 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/328 Tested-by: build bot (Jenkins)
2011-10-25X60/T60: remove superflous h8_set_audio_mute()Sven Schnelle
muting is handled by h8 code, no need to do it here. Change-Id: I3f152e99f30701cd032b03105cbe3ae778865305 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/335 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-21Remove redunancy in KconfigKyösti Mälkki
Socket Kconfig unconditionally selects CPU_INTEL_CORE. Change-Id: I5eb7dd17047a2a031dd7345390d7f5f756055e18 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/307 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-20T60: Add support for Ultrabay Legacy I/O devices (40Y8122)Sven Schnelle
Those modules have basically the same Super I/O capabilities as the Docking station. Unfortunately, the Super I/O in the module shares the same I/O address as the Docking station, so we're not allowed to connect the LPC Docking Bus if such a module is present. To be able to detect this device and use it as early console for coreboot, we have to initialize the GPIO Controller before, as this device is detected via GPIO06. Change-Id: If7c38bb6797f76cf28f09f3614ab9a33878571fb Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/282 Tested-by: build bot (Jenkins)
2011-10-13Use default table creator macro for all SSDTsStefan Reinauer
Change-Id: I0c138ebfdc6d4d5ae7d3512b0dd68df20485690e Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/262 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-13mptable: Refactor mptable generation some morePatrick Georgi
The last couple of lines of every mptable function were mostly identical. Refactor into common code, a new function mptable_finalize. Coccinelle script: @@ identifier mc; @@ ( -mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); -mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); -printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); -return smp_next_mpe_entry(mc); +return mptable_finalize(mc); | -mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); -mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); -return smp_next_mpe_entry(mc); +return mptable_finalize(mc); ) Change-Id: Ib2270d800bdd486c5eb49b328544d36bd2298c9e Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/246 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-13mptable: Get rid of fixup_virtual_wirePatrick Georgi
As stated in some code files, fixup_virtual_wire was established to avoid touching 200 invocations of the mptable code. Let Coccinelle do it: @@ type T; identifier v; @@ -void fixup_virtual_wire(T v) -{ ... } @@ expression A; identifier v; @@ -v = smp_write_floating_table(A); +v = smp_write_floating_table(A, 0); @@ expression A; identifier v; @@ -v = smp_write_floating_table(A, 0); -fixup_virtual_wire(v); +v = smp_write_floating_table(A, 1); Change-Id: Icad8a063380bf4726be7cebb414d13b574112b14 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/245 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-21Use ACPI text fields consistently with all other boardsStefan Reinauer
LXBIOS and LXB-DSDT are not used in other parts of the tree. Make names consistent across the tree. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Change-Id: I91caeac09fd2401a36e53bd061d249b236a48e43 Reviewed-on: http://review.coreboot.org/224 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2011-08-26X60/T60: remove obsolete dmi.hSven Schnelle
Change-Id: Id0e8bcc1b93a629f0620b84a060d7ff99a82de78 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/174 Tested-by: build bot (Jenkins)
2011-08-26Add automatic SMBIOS table generationSven Schnelle
Change-Id: I0ae16dda8969638a8f70fe1d2e29e992aef3a834 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/152 Tested-by: build bot (Jenkins)
2011-08-18X60: use EC events 0x50/0x58 instead of GPIO GPE for Docking/UndockingSven Schnelle
Change-Id: I674e5166f5fb7ba299e6f1231f30434a5bf731c5 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/161 Tested-by: build bot (Jenkins)
2011-07-11T60: enable GPIO before using GPIO I/O port rangeSven Schnelle
Change-Id: I39369e6f8a39f53f58a4b7fbe357637a79f5b596 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/93 Tested-by: build bot (Jenkins)
2011-07-11T60: dont use X60 USB init flagSven Schnelle
ec byte 0x03, bit 2 seems to be only used on the X60s for USB switch initialization. Don't touch it on T60. Change-Id: Icb89a514757a0e06ccea200fde62a778fa8c268e Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/92 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2011-07-07T60: handle EC events in SMM if ACPI is disabledSven Schnelle
Change-Id: I6f9e90015cafef3da896453ef8e3588434ae3554 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/89 Tested-by: build bot (Jenkins)
2011-06-28X60: remove pci config register save/restoreSven Schnelle
SMM code already makes sure this register is saved and restored, so we don't have to do it. Change-Id: I078e1227de4436fba9c5fb3879a564c981cb0f9a Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/65 Tested-by: build bot (Jenkins)
2011-06-23T60: undock on external power lossSven Schnelle
If power is unplugged/lost, we should undock the docking station. The power loss can also be caused by the fact that the user removed the thinkpad from the docking station without pressing the Undock button/hotkey first. Without undocking it on this event, the thinkpad LPC switch will still connect the Docking connector, which causes crashes when docking it again. Change-Id: I9ed783e491827bde20264868eab2b3a79c232922 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/62 Tested-by: build bot (Jenkins)
2011-06-23T60: enable userspace EC eventsSven Schnelle
EC events 0x50-0x5f are never triggered by the EC. Instead they can be generated by writing the wanted events to register 0x2a. Change-Id: Ifd7ce991ee094cb16e8425ed670b6b45cffe3907 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/61 Tested-by: build bot (Jenkins)
2011-06-23T60: add additional EC eventsSven Schnelle
We missed a few bits, i.e the battery and some hotkey events. Change-Id: Ia5561532f421eb3b40225301f0af639112abc3cc Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/60 Tested-by: build bot (Jenkins)
2011-06-23Add ThinkPad modelsSven Schnelle
Change-Id: I4f1a5d99486929eb0be76a0ab3bf0158a23c7d36 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/59 Tested-by: build bot (Jenkins)
2011-06-23T60: add missing License HeaderSven Schnelle
Change-Id: I03636deac7b6d8e01654cf978b1aac79cba10641 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/58 Tested-by: build bot (Jenkins)
2011-06-22X60: add missing License HeaderSven Schnelle
Change-Id: I9d6e80a633990e86dd3adfa2a761d09f62978349 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/57 Tested-by: build bot (Jenkins)
2011-06-18T60: set dock LED's in mainboard.cSven Schnelle
The docking takes place in romstage to have early serial I/O for debugging. But to keep romstage small and prevent linking the EC code to romstage, set the status LED's in ramstage. Change-Id: I89fadbd61b6bfd9aff8c22370e51c84325f24751 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/42 Tested-by: build bot (Jenkins)
2011-06-16X60/T60: disable USB power during suspendSven Schnelle
Change-Id: I11afba5d7531132a0274e55e8a478985a0ef956f Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/38 Tested-by: build bot (Jenkins)
2011-06-15i945 GMA: restore tft brightness from cmosSven Schnelle
Change-Id: Iaf10f125425a1abcf17ffca1d6e246f955f941cc Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/24 Tested-by: build bot (Jenkins)
2011-06-15Remove old ACPI codeSven Schnelle
it isn't used anywhere, and could be fetched from git/svn history if needed. Change-Id: Iaa2ba39af531d0389d7ab1110263ae7ecaa35c70 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/35 Tested-by: build bot (Jenkins)
2011-06-15i82801gx: replace cafed00d/cafebabe by definesSven Schnelle
We're using '0xcafed00d' all over the code as magic for ACPI S3 resume. Let's add a define for that. Also replace 0xcafebabe by a define. Change-Id: I5f5dc09561679d19f98771c4f81830a50202c69f Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/33 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-06-15X60: handle EC events in SMM if ACPI is disabledSven Schnelle
Change-Id: I0fee890bd2d667b54965201f5c90da3656d7af5c Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/27 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-06-15X60: trigger save cmos on volume/brightness changeSven Schnelle
Change-Id: I020e06bc311c4e4327c9d3cf2c379dc8fe070a7a Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/25 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-06-13X60/T60: set CMOS defaultsSven Schnelle
Change-Id: I5789a03898cdbade67887c0389aab5c773f867d9 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/26 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-06-12X60/T60: fix return value of mainboard_io_trap_handler()Sven Schnelle
The handler should return 1 if it handled the request. The current code returns 0, which causes 'Unknown function' logs. Change-Id: Ic296819a5f8c6f1f97b7d47148182226684882a0 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/29 Tested-by: build bot (Jenkins)
2011-06-09H8 EC: add volume CMOS settingSven Schnelle
Change-Id: I5332c8fa52556db34dfb5e772bf544f0323e823d Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/12 Tested-by: build bot (Jenkins)
2011-06-07T60/PMH7: move 'touchpad' option to pmh7Sven Schnelle
This option is PMH7 specific, and should be moved there, so all Notebook utilizing a PMH7 have this option. For Thinkpads without Touchpad (like the X60), simply don't add 'touchpad' to cmos.layout. Change-Id: Icdd0093670d565f1b16e2483aa286f4d63ccc52a Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/6 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-06-07SMM: add defines for APM_CNT registerSven Schnelle
in the current code, the defines for the APM_CNT (0xb2) register are duplicated in almost every place where it is used. define those values in cpu/x86/smm.h, and only include this file. And while at it, fixup whitespace. Change-Id: Iae712aff53322acd51e89986c2abf4c794e25484 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/4 Tested-by: build bot (Jenkins)
2011-06-07T60: fix touchpad optionSven Schnelle
Code used 'int' as return type, but the cmos option is only one bit. get_option returned with the value in bit 0-7, but all remaining bits were left unitialized by get_option(). fix this by using char as type. Change-Id: I60e609164277380f936f66c99ef9508fa6a6b67c Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/5 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-04-28Thinkpad: Enable Battery eventsSven Schnelle
Enable the following events for battery objects on Thinkpad X60/T60: 24: BAT0 critical 25: BAT1 critical 4A: BAT0 present 4B: BAT0 state change 4C: BAT1 present 4D: BAT1 state change Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Sven Schnelle <svens@stackframe.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6549 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-27X60: enable Ultrabay if device is plugged inSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6548 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-27T60: enable Ultrabay if device is plugged inSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6547 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-20run uart_init() from console_init, just like the other console ↵Stefan Reinauer
initialization functions. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6531 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-20Add Lenovo ThinkPad T60Sven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6530 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-18* Set USBDEBUG_DEFAULT_PORT in all southbridges and use that valueStefan Reinauer
to unify calls to *_enable_usbdebug() * rename *_enable_usbdebug() to enable_usbdebug() * move enable_usbdebug() to generic romstage console init code and drop it from the individual romstage.c files. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6513 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-11PMH7: Add chip configSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6486 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-11EC: Add Lenovo H8Sven Schnelle
Move the EC support code from the X60 mainboard to a generic driver, as this EC is used in many thinkpads. Also move the ACPI code to this directory for this reason. This patch also adds a chip config, so that the initial setting for basic register can be specified in devicetree.cb Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6485 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-05X60: use pnp_write_config() instead of custom functionSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Sven Schnelle <svens@stackframe.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6481 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-05X60: move ec version info code to log_ec_version()Sven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Sven Schnelle <svens@stackframe.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6480 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-04X60: assert audio mute before entering SuspendSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Sven Schnelle <svens@stackframe.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6479 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-04X60: log firmware versionSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Sven Schnelle <svens@stackframe.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6478 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-04X60: blink suspend LED during resumeSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Sven Schnelle <svens@stackframe.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6477 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-04X60: we have ACPI_RESUMESven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Sven Schnelle <svens@stackframe.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6476 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-04X60: deassert audio mute on bootSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Sven Schnelle <svens@stackframe.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6475 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-01remove swp files accidently addedSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Sven Schnelle <svens@stackframe.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6474 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-01X60: add dock code for Ultrabase X6Sven Schnelle
Move the old docking code from romstage.c to dock.c, and use that code both in romstage and SMM code. Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6473 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-21X60: Add notification for LID objectsSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Sven Schnelle <svens@stackframe.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6458 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-21X60: remove beep call from _Q26/_Q27Sven Schnelle
no need to trigger sound, the EC takes care of generating the annoying AC state beep if enabled in the sound mask. Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Sven Schnelle <svens@stackframe.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6457 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-15X60: Clear EC events when wake GPE is triggeredSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6448 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-14X60: LPC bus is LPCB, not LPCSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Sven Schnelle <svens@stackframe.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6446 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-14X60: fix typo in dsdt.aslSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Sven Schnelle <svens@stackframe.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6445 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-14X60: Add _PRW/_PSW methods to LID/SLPB objectsSven Schnelle
This patch adds the required methods for enabling/disabling the LID and SLPB objects as wake source. On Thinkpads, the Fn key can (and is by the Vendor BIOS) programmed as Wake source, so let's do it the same way. Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6444 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-07X60: add thermal zone 1Sven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6435 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-07X60: add thermal zone 0Sven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6434 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-01Use subsystem id from devicetree.cb instead of Kconfig and moveSven Schnelle
all boards to the new config scheme. Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6421 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-21[i945] Add SPD adress mappingSven Schnelle
The current code works only with dual channel if Channel 0 uses SPD address 0x50/0x51, while the second channel has to use 0x52/0x53. For hardware that uses other addresses (like the ThinkPad X60) this means we get only one module running instead of both. This patch adds a second parameter to sdram_initialize, which is an array with 2 * DIMM_SOCKETS members. It should contain the SPD addresses for every single DIMM socket. If NULL is given as the second parameter, the code uses the old addressing scheme. Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6374 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-16Add ACPI code for Lenvo X60Sven Schnelle
It currently supports: - Sleepbutton - AC state - Battery state - Interrupt routing - Display Brightness control - Hotkeys Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6368 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-16Lenovo ThinkPad X60: Enable SMI handlerSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6366 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-15Remove more files and lines mistakenly copied from Roda to X60Peter Stuge
Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6365 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-15Remove ACPI mistakenly copied from Roda to ThinkPad X60Peter Stuge
It is incorrect, and will be replaced with proper ACPI for X60. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6364 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-14Lenovo ThinkPad X60 / X60s SupportSven Schnelle
Adds support for Lenovo X60 series ThinkPads. So far, only X60s (Model 1703) has been tested. It's a basic patch without SMI and ACPI, as this makes it easier to review. SMI and ACPI patches will follow. Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6360 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 21:33:03 +0000