summaryrefslogtreecommitdiff
path: root/src/mainboard/lenovo
AgeCommit message (Collapse)Author
2022-06-01mb/lenovo/t440p/cmos: Remove unused optionsPeter Lemenkov
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Change-Id: I9bf95ed74468e283bab79a5f25aee758d37d926a Reviewed-on: https://review.coreboot.org/c/coreboot/+/63992 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-05-31mb/lenovo: Rename t440p to haswellFelix Singer
In preparation to follow-up commits, rename the mainboard folder from t440p to haswell, which will have more variants later. Change-Id: I4a9d68d54d5f0821bbf85faaa620855d456c97f3 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63511 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2022-05-30mb/lenovo/t530: Reorder selects alphabeticallyFelix Singer
Change-Id: I772ef94c860a26214bdae367d9863a56d5df9469 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64757 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@tutanota.com>
2022-05-30mb/lenovo/t530: Select board-specific options per boardFelix Singer
Move board-specific selects out of common configuration and add them to each board where necessary. Change-Id: I9940ad2e963458e4bc50c2a2957bb72cbd4109be Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@tutanota.com>
2022-05-30mb/lenovo/t530: Move selects from Kconfig.name to KconfigFelix Singer
Move selects from Kconfig.name to Kconfig so that the configuration is at one place and not distributed over two files. Change-Id: I8ef0e67a8f26b98acea777afb26ed221bfa90153 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64755 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@tutanota.com>
2022-05-28vendorcode/amd/agesa/f15tn: Fix all improper use of .dataArthur Heymans
AGESA has a lot of code in the .data section which is for initialized data, that in fact should be .rodata. This adds the 'CONST' keyword everywhere it is needed. TEST: See in the .elf file (e.g. using readelf) that there is nothing in .data section. Change-Id: I9593c24f764319f66a64715d91175f64edf10608 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64386 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2022-05-16mb/lenovo/t60: Add support for ThinkLightStefan Ott
With this patch, the ThinkLight on the ThinkPad T60 can be controlled through the OS. This was initially done for the X201 in f63fbdb6: mb/lenovo/x201: Add support for ThinkLight. After applying this patch, the light can be controlled like this: echo on >/proc/acpi/ibm/light echo off >/proc/acpi/ibm/light Or through sysfs at /sys/class/leds/tpacpi::thinklight Change-Id: I47f878533d36857d002d2e2605cc8bc7e1d960c9 Signed-off-by: Stefan Ott <stefan@ott.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40678 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2022-05-03lenovo: correct typo in macro H8_HAS_BAT_THRESHOLDS_IMPLPeter Lemenkov
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Change-Id: Ia0550a115d75183cd72e478ae739731001febe22 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63991 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2022-04-27cpu/intel/socket_p: Increase DCACHE_RAM_SIZEArthur Heymans
The lowest bound for L2 cache size on Socket P is 512 KiB. This allows the use of cbfs mcache on all platforms. This fixes building when some debug options are enabled. Change-Id: I0d6f7f9151ecd4c9fbbba4ed033dfda8724b6772 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52942 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-04-24mainboard/lenovo: Remove unused <acpi/acpi.h>Elyes HAOUAS
Found using: diff <(git grep -l '#include <acpi/acpi.h>' -- src/) <(git grep -l 'SLP_EN\|SLP_TYP_SHIFT\|SLP_TYP\|SLP_TYP_S\|ACPI_TABLE_CREATOR\|OEM_ID\|ACPI_DSDT_REV_\|acpi_device_sleep_states\|ACPI_DEVICE_SLEEP\|RSDP_SIG\|ASLC\|ACPI_NAME_BUFFER_SIZE\|COREBOOT_ACPI_ID\|acpi_tables\|acpi_rsdp\|acpi_gen_regaddr\|ACPI_ADDRESS_SPACE\|ACPI_FFIXEDHW_\|ACPI_ACCESS_SIZE_\|ACPI_REG_MSR\|ACPI_REG_UNSUPPORTED\|ACPI_HID_\|acpi_table_header\|MAX_ACPI_TABLES\|acpi_rsdt\|acpi_xsdt\|acpi_hpet\|acpi_mcfg\|acpi_tcpa\|acpi_tpm2\|acpi_mcfg_mmconfig\|acpi_hmat\|acpi_hmat_mpda\|acpi_hmat_sllbi\|acpi_hmat_msci\|acpi_srat\|ACPI_SRAT_STRUCTURE_\|acpi_srat_lapic\|acpi_srat_mem\|acpi_srat_gia\|CPI_SRAT_GIA_DEV_HANDLE_\|acpi_slit\|acpi_madt\|acpi_lpit\|acpi_lpi_flags\|acpi_lpi_desc_type\|ACPI_LPI_DESC_TYPE_\|acpi_lpi_desc_hdr\|ACPI_LPIT_CTR_FREQ_TSC\|acpi_lpi_desc_ncst\|acpi_vfct_image_hdr\|acpi_vfct\|acpi_ivrs_info\|acpi_ivrs_ivhd\|acpi_ivrs\|acpi_crat_header\|ivhd11_iommu_attr\|acpi_ivrs_ivhd_11\|dev_scope_type\|SCOPE_PCI_\|SCOPE_IOAPIC\|SCOPE_MSI_HPET\|SCOPE_ACPI_NAMESPACE_DEVICE\|dev_scope\|dmar_type\|DMAR_\|DRHD_INCLUDE_PCI_ALL\|ATC_REQUIRED\|DMA_CTRL_PLATFORM_OPT_IN_FLAG\|dmar_entry\|dmar_rmrr_entry\|dmar_atsr_entry\|dmar_rhsa_entry\|dmar_andd_entry\|dmar_satc_entry\|acpi_dmar\|acpi_apic_types\|LOCAL_APIC,\|IO_APIC\|IRQ_SOURCE_OVERRIDE\|NMI_TYPE\|LOCAL_APIC_NMI\|LAPIC_ADDRESS_\|IO_SAPIC\|LOCAL_SAPIC\|PLATFORM_IRQ_SOURCES\|LOCAL_X2APIC\|GICC\|GICD\|GIC_MSI_FRAME\|GICR\|GIC_ITS\|acpi_madt_lapic\|acpi_madt_lapic_nmi\|ACPI_MADT_LAPIC_NMI_ALL_PROCESSORS\|acpi_madt_ioapic\|acpi_madt_irqoverride\|acpi_madt_lx2apic\|acpi_madt_lx2apic_nmi\|ACPI_DBG2_PORT_\|acpi_dbg2_header\|acpi_dbg2_device\|acpi_fadt\|ACPI_FADT_\|PM_UNSPECIFIED\|PM_DESKTOP\|PM_MOBILE\|PM_WORKSTATION\|PM_ENTERPRISE_SERVER\|PM_SOHO_SERVER\|PM_APPLIANCE_PC\|PM_PERFORMANCE_SERVER\|PM_TABLET\|acpi_facs\|ACPI_FACS_\|acpi_ecdt\|acpi_hest\|acpi_hest_esd\|acpi_hest_hen\|acpi_bert\|acpi_hest_generic_data\|acpi_hest_generic_data_v300\|HEST_GENERIC_ENTRY_V300\|ACPI_GENERROR_\|acpi_generic_error_status\|GENERIC_ERR_STS_\|acpi_cstate\|acpi_sw_pstate\|acpi_xpss_sw_pstate\|acpi_tstate\|acpi_lpi_state_flags\|ACPI_LPI_STATE_\|acpi_lpi_state\|acpi_upc_type\|UPC_TYPE_\|acpi_ipmi_interface_type\|IPMI_INTERFACE_\|ACPI_IPMI_\|acpi_spmi\|ACPI_EINJ_\|ACTION_COUNT\|BEGIN_INJECT_OP\|GET_TRIGGER_ACTION_TABLE\|SET_ERROR_TYPE\|GET_ERROR_TYPE\|END_INJECT_OP\|EXECUTE_INJECT_OP\|CHECK_BUSY_STATUS\|GET_CMD_STATUS\|SET_ERROR_TYPE_WITH_ADDRESS\|TRIGGER_ERROR\|READ_REGISTER\|READ_REGISTER_VALUE\|WRITE_REGISTER\|WRITE_REGISTER_VALUE\|NO_OP\|acpi_gen_regaddr1\|acpi_einj_action_table\|acpi_injection_header\|acpi_einj_trigger_table\|set_error_type\|EINJ_PARAM_NUM\|acpi_einj_smi\|EINJ_DEF_TRIGGER_PORT\|FLAG_PRESERVE\|FLAG_IGNORE\|EINJ_REG_MEMORY\|EINJ_REG_IO\|acpi_einj\|acpi_create_einj\|fw_cfg_acpi_tables\|preload_acpi_dsdt\|write_acpi_tables\|acpi_fill_madt\|acpi_fill_ivrs_ioapic\|acpi_create_ssdt_generator\|acpi_write_bert\|acpi_create_fadt\|acpi_fill_fadt\|arch_fill_fadt\|soc_fill_fadt\|mainboard_fill_fadt\|acpi_fill_gnvs\|acpi_fill_cnvs\|update_ssdt\|update_ssdtx\|acpi_fill_lpit\|acpi_checksum\|acpi_add_table\|acpi_create_madt_lapic\|acpi_create_madt_ioapic\|acpi_create_madt_irqoverride\|acpi_create_madt_lapic_nmi\|acpi_create_madt\|acpi_create_madt_lapics\|acpi_create_madt_lapic_nmis\|acpi_create_madt_lx2apic\|acpi_create_srat_lapic\|acpi_create_srat_mem\|acpi_create_srat_gia_pci\|acpi_create_mcfg_mmconfig\|acpi_create_srat_lapics\|acpi_create_srat\|acpi_create_slit\|acpi_create_hmat_mpda\|acpi_create_hmat\|acpi_create_vfct\|acpi_create_ipmi\|acpi_create_ivrs\|acpi_create_crat\|acpi_create_hpet\|acpi_write_hpet\|generate_cpu_entries\|acpi_create_mcfg\|acpi_create_facs\|acpi_create_dbg2\|acpi_write_dbg2_pci_uart\|acpi_create_dmar\|acpi_create_dmar_drhd\|acpi_create_dmar_rmrr\|acpi_create_dmar_atsr\|acpi_create_dmar_rhsa\|acpi_create_dmar_andd\|acpi_create_dmar_satc\|cpi_dmar_\|acpi_create_\|acpi_write_hest\|acpi_soc_get_bert_region\|acpi_resume\|mainboard_suspend_resume\|acpi_find_wakeup_vector\|ACPI_S\|acpi_sleep_from_pm1\|acpi_get_preferred_pm_profile\|acpi_get_sleep_type\|acpi_get_gpe\|permanent_smi_handler\|acpi_s3_resume_allowed\|acpi_is_wakeup_s3\|acpi_align_current\|get_acpi_table_revision' -- src/) |grep "<" Change-Id: Ie0226fbf1c1ce8eb98abb7b3e2c6b67212faa06c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60625 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <martinroth@google.com>
2022-04-21tpm: Refactor TPM Kconfig dimensionsJes B. Klinke
Break TPM related Kconfig into the following dimensions: TPM transport support: config CRB_TPM config I2C_TPM config SPI_TPM config MEMORY_MAPPED_TPM (new) TPM brand, not defining any of these is valid, and result in "generic" support: config TPM_ATMEL (new) config TPM_GOOGLE (new) config TPM_GOOGLE_CR50 (new, implies TPM_GOOGLE) config TPM_GOOGLE_TI50 (new to be used later, implies TPM_GOOGLE) What protocol the TPM chip supports: config MAINBOARD_HAS_TPM1 config MAINBOARD_HAS_TPM2 What the user chooses to compile (restricted by the above): config NO_TPM config TPM1 config TPM2 The following Kconfigs will be replaced as indicated: config TPM_CR50 -> TPM_GOOGLE config MAINBOARD_HAS_CRB_TPM -> CRB_TPM config MAINBOARD_HAS_I2C_TPM_ATMEL -> I2C_TPM && TPM_ATMEL config MAINBOARD_HAS_I2C_TPM_CR50 -> I2C_TPM && TPM_GOOGLE config MAINBOARD_HAS_I2C_TPM_GENERIC -> I2C_TPM && !TPM_GOOGLE && !TPM_ATMEL config MAINBOARD_HAS_LPC_TPM -> MEMORY_MAPPED_TPM config MAINBOARD_HAS_SPI_TPM -> SPI_TPM && !TPM_GOOGLE && !TPM_ATMEL config MAINBOARD_HAS_SPI_TPM_CR50 -> SPI_TPM && TPM_GOOGLE Signed-off-by: Jes B. Klinke <jbk@chromium.org> Change-Id: I4656b2b90363b8dfd008dc281ad591862fe2cc9e Reviewed-on: https://review.coreboot.org/c/coreboot/+/63424 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-04-16mb/lenovo/t440p/Kconfig: Reorder selects alphabeticallyFelix Singer
Built lenovo/t440p with BUILD_TIMELESS=1 and coreboot.rom remains the same. Change-Id: I7bac7ad5236346a3c2a8928ecdfadde6564ff232 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63429 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-04-16mb/lenovo/t440p/dsdt.asl: Remove redundant commentFelix Singer
Change-Id: Ie772701192a3589b51642df446f0b2527fb7d630 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63428 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2022-03-07src: Make PCI ID define names shorterFelix Singer
Shorten define names containing PCI_{DEVICE,VENDOR}_ID_ with PCI_{DID,VID}_ using the commands below, which also take care of some spacing issues. An additional clean up of pci_ids.h is done in CB:61531. Used commands: * find -type f -exec sed -i 's/PCI_\([DV]\)\(EVICE\|ENDOR\)_ID_\([_0-9A-Za-z]\{2\}\([_0-9A-Za-z]\{8\}\)*[_0-9A-Za-z]\{0,5\}\)\t/PCI_\1ID_\3\t\t/g' * find -type f -exec sed -i 's/PCI_\([DV]\)\(EVICE\|ENDOR\)_ID_\([_0-9A-Za-z]*\)/PCI_\1ID_\3/g' Change-Id: If9027700f53b6d0d3964c26a41a1f9b8f62be178 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39331 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2022-02-25arch/x86: consolidate HPET base address definitionsFelix Held
Both the HPET_BASE_ADDRESS define from arch/x86/include/arch/hpet.h and the HPET_ADDRESS Kconfig option define the base address of the HPET MMIO region which is 0xfed00000 on all chipsets and SoCs in the coreboot tree. Since these two different constants are used in different places that however might end up used in the same coreboot build, drop the Kconfig option and use the definition from arch/x86 instead. Since it's no longer needed to check for a mismatch of those two constants, the corresponding checks are dropped too. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia797bb8ac150ae75807cb3bd1f9db5b25dfca35e Reviewed-on: https://review.coreboot.org/c/coreboot/+/62307 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Lance Zhao Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-22mb/lenovo/g505s/acpi/ec.asl: Correct the path to "mainboard.h"Elyes Haouas
Change-Id: I273e29a26cf1c1ba34b95eb11bcb59a1360371e1 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-02-22mb/lenovo/g505s: Format codeElyes Haouas
Change-Id: I9cce00e1634d62a63b3563d54a7a0c56058d0e39 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61920 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-01-10src/mainboard/{jetway,lenovo,msi,ocp}: Remove unused <console/console.h>Elyes HAOUAS
Found using: diff <(git grep -l '#include <console/console.h>' -- src/) <(git grep -l 'console_time_report\|console_time_get_and_reset\|do_putchar\|vprintk\|printk\|console_log_level\|console_init\|get_log_level\|CONSOLE_ENABLE\|get_console_loglevel\|die_notify\|die_with_post_code\|die\|arch_post_code\|mainboard_post\|post_code\|RAM_SPEW\|RAM_DEBUG\|BIOS_EMERG\|BIOS_ALERT\|BIOS_CRIT\|BIOS_ERR\|BIOS_WARNING\|BIOS_NOTICE\|BIOS_INFO\|BIOS_DEBUG\|BIOS_SPEW\|BIOS_NEVER' -- src/) |grep "<" Change-Id: I74264aa04d819b26c6ee91ded88b5578784a0732 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60923 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-01-04sb/intel: Use `bool` for PCIe coalescing optionAngel Pons
Retype the `pcie_port_coalesce` devicetree options and related variables to better reflect their bivalue (boolean) nature. Change-Id: I6a4dfe277a8f83a9eb58515fc4eaa2fee0747ddb Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60416 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-12-29mb/lenovo/g505s/acpi: Use Printf() for debug printsFelix Singer
Change-Id: Ibc775cda61134523dc03a073676b9d035ea48472 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60420 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2021-11-23mb/lenovo: Enable MEI on Sandy Bridge ThinkPadsEvgeny Zinoviev
It was already enabled on T520 and L520, but disabled on X220, T420 and T420s. On X220, it was disabled by commit 0793afe9 (mb/lenovo/x220: disable ME). I can't reproduce those issues today on linux 4.4 and linux 5.13. Also, it breaks the me_disable feature, we already have a Kconfig option to hide MEI in case of errors, and it will be hidden on disabled, recovery, firmware update paths anyway. Change-Id: I8e6d067a9c728443d00df541ac7a9a878df58b6a Signed-off-by: Evgeny Zinoviev <me@ch1p.io> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59527 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2021-11-10Rename ECAM-specific MMCONF KconfigsShelley Chen
Currently, the MMCONF Kconfigs only support the Enhanced Configuration Access mechanism (ECAM) method for accessing the PCI config address space. Some platforms have a different way of mapping the PCI config space to memory. This patch renames the following configs to make it clear that these configs are ECAM-specific: - NO_MMCONF_SUPPORT --> NO_ECAM_MMCONF_SUPPORT - MMCONF_SUPPORT --> ECAM_MMCONF_SUPPORT - MMCONF_BASE_ADDRESS --> ECAM_MMCONF_BASE_ADDRESS - MMCONF_BUS_NUMBER --> ECAM_MMCONF_BUS_NUMBER - MMCONF_LENGTH --> ECAM_MMCONF_LENGTH Please refer to CB:57861 "Proposed coreboot Changes" for more details. BUG=b:181098581 BRANCH=None TEST=./util/abuild/abuild -p none -t GOOGLE_KOHAKU -x -a -c max Make sure Jenkins verifies that builds on other boards Change-Id: I1e196a1ed52d131a71f00cba1d93a23e54aca3e2 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57333 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-22AGESA binaryPI: Use common acpi_fill_madt()Kyösti Mälkki
Change-Id: I01ee0ba99eca6ad4c01848ab133166f8c922684d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55569 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-19cpu/intel/speedstep: Constify `get_cst_entries()`Angel Pons
Make the `get_cst_entries()` function provide a read-only pointer. Also, constify the actual data where applicable. Change-Id: Ib22b3e37b086a95af770465a45222e9b84202e54 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58393 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-17drivers/generic/ioapic: Drop enable_virtual_wireKyösti Mälkki
All boards with DRIVERS_GENERIC_IOAPIC select it. Presumably the related configuration of routing IRQ0 when IOAPIC is enabled should be always done to provide i8259 legacy compatibility for payloads. Change-Id: Ie87816271fa63bba892c8615aa5e72ee68f6ba93 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55287 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-10-15mainboard: Drop invalid `VGA_BIOS_FILE` defaultsAngel Pons
If the VGA BIOS file path for `VGA_BIOS_FILE` in a mainboard's Kconfig does not exist in the coreboot tree (including submodules), drop it. These files should be stored in the `site-local` subdirectory and the paths specified for each board in `site-local/Kconfig`. For example: config VGA_BIOS_FILE default "site-local/x200_vbios.bin" if BOARD_LENOVO_X200 Note that this is just an example. There are better ways to structure one's `site-local` subfolder. Using the `CONFIG_MAINBOARD_DIR` option would be one of them, though variants may still need special handling. Also, update autoport to not generate `VGA_BIOS_FILE` defaults. Change-Id: I1b5dfba035a42d7943f270f95fb7d32b285584d2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51340 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-10-05src/mainboard to src/security: Fix spelling errorsMartin Roth
These issues were found and fixed by codespell, a useful tool for finding spelling errors. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ie34003a9fdfe9f3b1b8ec0789aeca8b9435c9c79 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58081 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-08mb/lenovo/x60: Fix devicetree hierarchyNico Huber
The Ricoh bridge device is actually on the external PCI bus. To make the driver configuration usable, also add a PCI device below it. Change-Id: I58a25da9d676a19b47e8b88438152bc247c024b4 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57474 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-08mb/lenovo/x200: Fix X301 override treeNico Huber
`chip` entries always need a device node below them to actually get hooked up. Change-Id: Ib9e6019b6f316c1b176da1592514dcdcaf8c505a Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57473 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-08mb/lenovo/x220: Fix override treesNico Huber
`chip` entries always need a device node below them to actually get hooked up. Change-Id: Ia5c573e582dab542b2a2a969c17581b0da6ed74e Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57472 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-08mb/lenovo/t530: Fix override treesNico Huber
`chip` entries always need a device node below them to actually get hooked up. Change-Id: I91c98f66951de5301f72754a24a92168862820a2 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57471 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-08mb/lenovo/t520: Fix T520 override treeNico Huber
`chip` entries always need a device node below them to actually get hooked up. Change-Id: I4781d6afdcd92f21872f3059b417483107129bf4 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57470 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-08mb/lenovo/t430s: Fix override treesNico Huber
`chip` entries always need a device node below them to actually get hooked up. Change-Id: I244cd5d91af9413b338de0e8ee2480d9744ea077 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57469 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-08mb/lenovo/t400: Fix R500 override treeNico Huber
`chip` entries always need a device node below them to actually get hooked up. Change-Id: Ie84694f586351ce327c8df9338e96377825ad7c7 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57468 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-06mb/lenovo: Use pci_and_config32Peter Lemenkov
Change-Id: I082d31d59660c48065f9390975817d3ed553da2d Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55606 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-08-22AGESA f15tn: Factor out common OptionsIds.hAngel Pons
Subsequent commits will add Kconfig options to configure IDS. Tested with BUILD_TIMELESS=1, Asus A88XM-E remains identical. Change-Id: I861762280b274566ce14969a30e2e0c98e120a69 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/53984 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2021-08-22AGESA f15tn: Drop `IDSOPT_ASSERT_ENABLED`Angel Pons
The `ASSERT` macro is already defined in `src/include/assert.h`, and AGESA's definition is never used. On Asus A88XM-E, toggling the value of the `IDSOPT_ASSERT_ENABLED` macro does not change the resulting binary when using reproducible builds. Attempting to use AGESA's definition of the `ASSERT` macro results in build errors: In file included from src/vendorcode/amd/agesa/f15tn/Proc/CPU/Feature/cpuDmi.c:56: src/vendorcode/amd/agesa/f15tn/Proc/CPU/Feature/cpuDmi.c: In function 'GetType4Type7Info': src/vendorcode/amd/agesa/f15tn/Include/Ids.h:371:33: error: statement with no effect [-Werror=unused-value] #define ASSERT(conditional) ((conditional) ? 0 : IdsAssert (STOP_CODE)); Given that coreboot's definition of `ASSERT` is more useful, drop AGESA's broken definition and the useless `IDSOPT_ASSERT_ENABLED` macro. Also remove the `IdsAssert` function, as it is no longer used anywhere. Tested with BUILD_TIMELESS=1, Asus A88XM-E remains identical. Change-Id: Ia4e5dbfd3d2e5cec979b8b16fbc11d1ca8a0661e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/53983 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2021-07-26mb/*: Specify type of `VARIANT_DIR` onceAngel Pons
Specify the type of the `VARIANT_DIR` Kconfig symbol once instead of doing so on each and every mainboard. Change-Id: Iea2f992a59e41e00fec3cdc9d6a13b5f3ab0a437 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56558 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/*: Specify type of `FMDFILE` onceAngel Pons
Specify the type of the `FMDFILE` Kconfig symbol once instead of doing so on each and every mainboard. Change-Id: I810bd3fe8d42102586db6c2c58b7037a60189257 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56557 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/*: Specify type of `OVERRIDE_DEVICETREE` onceAngel Pons
Specify the type of the `OVERRIDE_DEVICETREE` Kconfig symbol once instead of doing so on each and every mainboard. Change-Id: I4cbf4e318a30f0cf75aa8690e7454b9caa115c9d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56556 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/*: Specify type of `MAINBOARD_PART_NUMBER` onceAngel Pons
Specify the type of the `MAINBOARD_PART_NUMBER` Kconfig symbol once instead of doing so on each and every mainboard. Change-Id: I3692f9e82fe90af4d0da1d037018a20aa1b45793 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56554 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/*: Specify type of `MAINBOARD_DIR` onceAngel Pons
Specify the type of the `MAINBOARD_DIR` Kconfig symbol once instead of doing so on each and every mainboard. Change-Id: If1cc538b0c4938dac193699897b690e402b3c1e8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56553 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26src/*: Specify type of `CBFS_SIZE` onceAngel Pons
There's no need to specify the type of the `CBFS_SIZE` Kconfig symbol more than once. This is done in `src/Kconfig`, along with its prompt. Change-Id: I9e08e23e24e372e60c32ae8cd7387ddd4b618ddc Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56552 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-22mb/lenovo/t440p: Disable second PEG deviceAngel Pons
PEG bifurcation is strapped to x8/x8 on this board, but only the first port is used. Disable the PEG device at 00:01.1 because it is unused. Should fix booting with commit ae999503f62ef8a3b9b2756a2810d29c383a009e (nb/intel/haswell/pcie.c: Add missing pre-ASPM init). The `config_of()` function call added in that commit makes coreboot die if any PEG device that is enabled by strapping is not present in the devicetree. While it is true that the PEG code should not use `config_of()`, this PEG device should still be disabled on this board as it is never used. Change-Id: I16809e081f9a56ba2f1fdfcb4b8289d75161056b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55687 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Máté Kukri <kukri.mate@gmail.com>
2021-06-22mb/lenovo/t440p/devicetree.cb: Visually align devicesAngel Pons
Visually align devices and corresponding comments in the devicetree. Tested with BUILD_TIMELESS=1, Lenovo T440p remains identical. Change-Id: Id6f521275ffd0b35c247152dc9293c4182c4a96d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55686 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-06-22mb/lenovo/t440p: Drop redundancy in devtree commentsAngel Pons
Remove some redundant parts of devicetree comments. This used to happen when using autoport, but has been fixed at some point. Tested with BUILD_TIMELESS=1, Lenovo T440p remains identical. Change-Id: Ie24b5430c7771c9ce4dda6c9a10d70ee9000df7c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55685 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-06-17mb/lenovo/x230: Fix overridetrees not overridingAngel Pons
Any chip entry without a device node below them are silently dropped by sconfig. Copy the same device node from the devicetree to prevent this. Change-Id: I778f6b2d980e78142ae12ef941e7d9bd1f753057 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55540 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-17nb/intel/ironlake: Factor out common uncore ASLAngel Pons
Tested with BUILD_TIMELESS=1, Packard Bell MS2290 remains identical. Change-Id: I7e37d32251fa3dcc64aec62dd2d814463c4a9999 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55580 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-16arch/x86/ioapic: Drop irq_on_fsb as a configurable itemKyösti Mälkki
APIC Serial Bus pins were removed with ICH5 already, so a choice 'irq_on_fsb = 0' would not take effect. The related register BOOT_CONFIG 0x3 is also not documented since ICH5. For emulation/qemu-q35 with ICH9 the choice INTERRUPT_ON_APIC_BUS was wrong and ignored as BOOT_CONFIG register emulation was never implemented. For ICH4 and earlier, the choice to use FSB can be made based on the installed CPU model but this is now just hardwired to match P4 CPUs of aopen/dxplplusu. For sb/intel/i82371eb register BOOT_CONFIG 0x3 is also not defined and the only possible operation mode there is APIC Serial Bus, which requires no configuration. Change-Id: Id433e0e67cb83b44a3041250481f307b2ed1ad18 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55257 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-15mb/lenovo/w541: Add ThinkPad W541Amersel
Add support for the ThinkPad W541 based on Peter Lemenkov's initial W541 port. Compiled and tested with SeaBIOS and Tianocore booting into Arch Linux 5.10.32-lts. The Haswell mrc.bin blob is required. Tested working: - SATA SSD - SATA DVD drive - M.2 SATA - All USB ports - SD card reader - Speakers/headphone jack - Keyboard/touchpad - libgfxinit - VGA - mini DisplayPort (Thunderbolt untested) - eDP laptop screen - NVIDIA GPU in Linux - Camera/Mic - Smartcard reader - Internal flashing when IFD is unlocked - ThinkPad basic dock (VGA, USB, Ethernet) - CMOS options - WLAN - Bluetooth - Ethernet - Using me_cleaner - All DDR3 slots Not working: - Keyboard backlight - First boot can take up to 20s (MRC.bin is slow) Untested: - Thunderbolt - Internal flashing when IFD is locked - Other ThinkPad docks (DisplayPort, DVI, Audio) - ExpressCard slot - Battery thresholds - WWAN card - Fingerprint reader - USB Debug console Signed-off-by: Justin Wu <amersel@runbox.me> Change-Id: Ia43070f51bba3cf59ba9b7d9e29e4e778efbeb08 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52659 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Peter Lemenkov <lemenkov@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-14mb/*/mptable.c: Replace magic constantsKyösti Mälkki
Read I/O APIC ID and version from hardware registers. With coccinelle below, and minor fixups. @ r1 @ expression E1, E2, E3, E4; typedef u8; @@ -smp_write_ioapic(E1, E2, E3, E4); +u8 ioapic_id = smp_write_ioapic_from_hw(E1, E4); @ r2 @ expression E1, E2, E3, E4; @@ -mptable_add_isa_interrupts(E1, E2, E3, E4) +mptable_add_isa_interrupts(E1, E2, ioapic_id, E4) @ r3 @ expression E1, E2, E3, E4, E5, E6, E7; @@ -smp_write_pci_intsrc(E1, E2, E3, E4, E5, E6, E7) +smp_write_pci_intsrc(E1, E2, E3, E4, E5, ioapic_id, E7) @ r4 @ symbol mp_INT; expression E1, E3, E4, E5, E6, E7; @@ -smp_write_intsrc(E1, mp_INT, E3, E4, E5, E6, E7) +smp_write_intsrc(E1, mp_INT, E3, E4, E5, ioapic_id, E7) Change-Id: I20799f0c09cf0292661e1f3cb93373b2c68b7314 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55284 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-06-11cpu/x86/lapic: Replace LOCAL_APIC_ADDR referencesKyösti Mälkki
Note that there are assumptions about LAPIC MMIO location in both AMD and Intel sources in coreboot proper. Change-Id: I2c668f5f9b93d170351c00d77d003c230900e0b4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55194 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-07sb/intel/ibexpeak: Drop P_LVLx support in FADTAngel Pons
IO MWAIT redirection is not enabled. The code is missing, but C-states should instead be reported using the _CST ACPI object. Change-Id: I21fd2fa6ee4aa1ed57694549d5cb48159f37af26 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55217 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-06-07bd82x6x boards: Drop redundant `c2_latency`Angel Pons
If unspecified, chipset code already uses 101, and 0x65 == 101. Change-Id: I524ca492fa577003df23017756f74a455582132f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55212 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-06-06mb/lenovo/t410: Enable WLAN and WUSB PCIe portsAngel Pons
These PCH PCIe ports are used and should be enabled. Resolves: https://ticket.coreboot.org/issues/311 Change-Id: I26ace6e043c7c66f8944f0986923014703423b8c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55169 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Swift Geek (Sebastian Grzywna) <swiftgeek@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-06-06mb/lenovo/t410: Update PCH PCIe RP commentsAngel Pons
Looks like the comments were derived from a preproduction board's schematics. Production boards use a different port mapping. Change-Id: I40c267ff048959b131c22c07695212e8bd90c3f4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55171 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Swift Geek (Sebastian Grzywna) <swiftgeek@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-05-26mb/lenovo/t430: Do not set unused GNVS fieldsAngel Pons
ACPI code for this mainboard uses none of these values. Change-Id: I429bf8dc229fd830ae662034a8b733c9ee669140 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54851 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-18mainboard: Use decimal for `device lapic 0x0 on`Angel Pons
Most boards use `device lapic 0 on` with zero written in decimal. For the sake of consistency, update the remaining boards to follow suit. Change-Id: I1d3b1ac107e33aae11189cdd5e719b8e48b10f08 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54359 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-05-18mainboard: Use decimal for `device domain 0x0 on`Angel Pons
Most boards use `device domain 0 on` with zero written in decimal. For the sake of consistency, update the remaining boards to follow suit. Change-Id: I6e2f0a19d57cfe6fc4e4ac4d14310133ad6b01d8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54358 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-05-18mainboard: Use decimal for `device cpu_cluster 0x0 on`Angel Pons
Most boards use `device cpu_cluster 0 on` with zero written in decimal. For the sake of consistency, update the remaining boards to follow suit. Change-Id: I083c8f8e9b38ddcc217dc8bf17ae3c9473ba77e9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54357 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-05-13src: Match array format in function declarations and definitionsPatrick Georgi
gcc 11.1 complains when we're passing a type* into a function that was declared to get a type[], even if the ABI has identical parameter passing for both. To prepare for newer compilers, adapt to this added constraint. Change-Id: I5a1b3824a85a178431177620c4c0d5fddc993b4f Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54094 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-05-10AGESA boards: Drop comments about `IDS_DEBUG_PORT`Angel Pons
No board defines this macro. In preparation to drop OptionsIds.h files from mainboards, remove commented-out references to `IDS_DEBUG_PORT`. Change-Id: I67a10d863aeea9e1b91c38aa02d19106b7b97659 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/53981 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2021-05-10AGESA boards: Drop unused `IDSOPT_HOST_SIMNOW` macroAngel Pons
This macro is not used anywhere in AGESA. Remove all references. Change-Id: Ibc2876a5a8419ec4fa5a793bb996f5c14d989bac Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/53980 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2021-05-10AGESA boards: Drop unused `IDSOPT_HOST_HDT` macroAngel Pons
This macro is not used anywhere in AGESA. Remove all references. Change-Id: I9cd9fa0dc25b1143f8b4c1f20beffba638437398 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/53979 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2021-05-10AGESA boards: Drop unused `IDSOPT_DEBUG_ENABLED` macroAngel Pons
This macro is not used anywhere in AGESA. Remove all references. Change-Id: Icae0ecae77a20e1568440e3191a29db33b5581d8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/53978 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2021-05-06src: Retype option API to use unsigned integersAngel Pons
The CMOS option system does not support negative integers. Thus, retype and rename the option API functions to reflect this. Change-Id: Id3480e5cfc0ec90674def7ef0919e0b7ac5b19b3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-05-04mb/*/Kconfig: Drop select USE_OPTION_TABLEPatrick Rudolph
Only 4 mainboards selected to use the option table. Use the same default on all boards. Change-Id: Ia9ef88d5158a2b43f843c26b5b366a899dad8788 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52855 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-04-26mb/**/cmos.layout: Drop unreferenced `iommu` optionAngel Pons
No code in coreboot uses this option, so it might as well be dropped. Change-Id: Ie58bab7e87831db08b9f398a777ba350920b707b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52639 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-26mainboard: Drop unreferenced CMOS optionsAngel Pons
Remove CMOS options that are not read anywhere in the code. They may have been used in the native AMD platform code, or got copied around from board to board and never did anything to begin with. Change-Id: Ib19ace4fa6e610a28e68fe2612b4e623f200f064 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52638 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Piotr Król <piotr.krol@3mdeb.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-23src: Replace remaining {get,set}_option() instancesAngel Pons
With this change, the type-unsafe {get,set}_option() API functions are no longer used directly. The old API gets dropped in a follow-up. Change-Id: Id3f3e172c850d50a7d2f348b1c3736969c73837d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52512 Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-21mainboard: Use read_int_option()Angel Pons
Change-Id: I9273b90b6a21b8f52fa42d9ff03a9b56eec9fcbf Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47137 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-04-06mb/lenovo/t420: Copy HDA verbs from vendor firmwarePiotr Szymaniak
Background story (I think that's what great in opensource - ppl leave there part of their lives): ;-) While trying to fix audio jack not working with coreboot and Windows 10 with some help from hell__ and nico_h on IRC nico_h discovered that t420 and t430 hda_verb.c are the same: <nico_h> oddly, in coreboot source T420 and T430 have the same numbers for very different codecs... I suspect copy-pasta Difference between /sys/class/sound/cardX/hwCXDY/init_pin_config in vendor BIOS helped with the updated config. Connecting audio jack now works flawless both in Linux and Windows. Audio-related keyboard buttons: volup, voldown, mute works fine both in Linux (Debian-based) and Windows 10. mutemic button works (tested ie. with xev) but both in Linux and Windows 10 wont light up or makes any effect. +-----------------------------------+ | init_pin_config dump from: | +----= VENDOR =---+---= coreboot =--+ | 0x19 0x04211040 | 0x19 0x04211040 | | 0x1a 0x61a19050 | 0x1a 0x61a19050 | | 0x1b 0x04a11060 | 0x1b 0x04a11060 | | 0x1c 0x6121401f | 0x1c 0x6121401f | | 0x1d 0x40f001f0 | 0x1d 0x40f001f0 | | 0x1e 0x40f001f0 | 0x1e 0x40f001f0 | | 0x1f 0x90170110 | 0x1f 0x90170110 | | 0x20 0x40f001f0 | 0x20 0x40f001f0 | | 0x22 0x40f001f0 | 0x22 0x40f001f0 | | 0x23 0x90a60170 | 0x23 0x90a60170 | +-----------------+-----------------+ Tested-by: Piotr Szymaniak Signed-off-by: Piotr Szymaniak <szarpaj@grubelek.pl> Change-Id: Ie5eba84e5ea590b7db00e189cd68e714bee7e410 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51612 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-05nb/intel/sandybridge: Drop `pci_mmio_size`Angel Pons
There's no good reason to use values smaller than 2 GiB here. Well, it increases available DRAM in 32-bit space. However, as this is a 64-bit platform, it's highly unlikely that 32-bit limitations would cause any issues anymore. It's more likely to have the allocator give up because memory-mapped resources in 32-bit space don't fit within the specified MMIO size, which can easily occur when using a discrete graphics card. Change-Id: If585b6044f58b1e5397457f3bfa906aafc7f9297 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52072 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-05sandybridge boards: Drop default `pci_mmio_size`Angel Pons
2 GiB is the default already. Change-Id: I294460949659c97d4e19ad4e9d14f8c3566cca3f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52071 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-05nb/intel/ironlake: Drop `pci_mmio_size`Angel Pons
There's no good reason to use values smaller than 2 GiB here. Well, it increases available DRAM in 32-bit space. However, as this is a 64-bit platform, it's highly unlikely that 32-bit limitations would cause any issues anymore. It's more likely to have the allocator give up because memory-mapped resources in 32-bit space don't fit within the specified MMIO size, which can easily occur when using a discrete graphics card. Change-Id: I6cdce5f56bc94cca7065ee3e38af60d1de66e45c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52070 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-25nb/intel/haswell: Decouple mainboard USB config from MRCAngel Pons
With this change, only raminit.c uses pei_data.h definitions. With MRC cornered, making it optional is just a matter of writing a replacement. USB config definitions will be moved to Lynx Point code in a follow-up. Tested on Asrock B85M Pro4, still boots and still resumes from S3. Change-Id: I4bc405213e9b0828d9ced18677335533c7dd381d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51440 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-03-23nb/intel/haswell: Use unshifted SPD addresses in mainboardsAngel Pons
It's common to use the raw, unshifted I2C address in coreboot. Adapt mainboards accordingly and perform the shift in MRC glue code. Tested on Asrock B85M Pro4, still boots and still resumes from S3. Change-Id: I4e4978772744ea27f4c5a88def60a8ded66520e1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51458 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-19mb/lenovo/x200: Fix boot-time docking stateKevin Keijzer
The X200 would undock itself when waking up from S3, requiring a physical reconnection before the dock would work again. Similar to 4611ad8, this reintroduces h8_mb_init() for the X200. A hook function h8_mb_init() will be called at the end of h8_enable(), in place of the ancient h8_mainboard_init_dock(). This should fix the regression the X201 and T410 also suffered from for the X200. Change-Id: Icb6dd145e56b90e0e04133810c5e9ac7b641ad68 Signed-off-by: Kevin Keijzer <kevin@quietlife.nl> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51123 Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-19nb/intel/haswell: Consolidate memory-down SPD handlingAngel Pons
Mainboards do not need to know about `pei_data` to tell northbridge code where to find the SPD data. Adjust `mb_get_spd_map` to take a pointer to a struct instead of an array, and update all the mainboards accordingly. Currently, the only board with memory-down in the tree is google/slippy. Mainboard code now obtains the SPD index in `mb_get_spd_map` and adjusts the channel population accordingly. Then, northbridge code reads the SPD file and uses the index that was read in `mb_get_spd_map`, and copies it to channel 0 slot 0 unconditionally. MRC only uses the first position of the `spd_data` array, and ignores the other positions. In coreboot code, `setup_sdram_meminfo` uses the data of each SPD index, so `copy_spd` has to account for this. Tested on Asrock B85M Pro4, still boots and still resumes from S3. Change-Id: Ibaed5c6de9853db6abd08f53bbfda8800d207c3e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51448 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-16AGESA,binaryPI boards: Drop invalid MP table filesKyösti Mälkki
If we spot any error in the file, treat it as untested and broken copy-paste. Change-Id: Idd13b8b006fce7383f3f73c3c0a5d51a71c0155b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38313 Reviewed-by: Mike Banon <mikebdp2@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-16AGESA,binaryPI boards: Move IRQ table programmingKyösti Mälkki
IRQ programming should be done outside (obsolete) MP table generation. Change-Id: Ibce2af4de91549c4c9743cd997f625164672a713 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38564 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Mike Banon <mikebdp2@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-15mb/lenovo/t440p: update VBT to version 2179Da Lao
Update T440p's VBT from version 1215 to version 2179. Extracted using VBiosFinder (https://github.com/coderobe/VBiosFinder) from the latest bios update file: https://download.lenovo.com/pccbbs/mobiles/gluj42us.iso The new version solves the problem that DP output was broken under Windows. Test: boot t440p with both SeaBIOS and Tianocore payloads, verify dp output and backlight control all works under both Linux and Windows. Signed-off-by: Da Lao <dalao@tutanota.com> Change-Id: If8669b8de6fa0801e261138651b8b2cf50432a70 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40723 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Jamal Wright <Crabstorage@getbackinthe.kitchen>
2021-03-02mb/lenovo/x200: Fix docking eventsNico Huber
Even though `device` entries are children of `chip` entries in the devicetree source format, the chips in the translated C structures are only hooked up to device nodes. Hence, to configure a chip in a device- or overridetree, it always needs a `device` below it. This should fix docking events for the X200 ThinkPad. Change-Id: I561e7ae81f2e096a091868ce51daa1c8f66af067 Signed-off-by: Nico Huber <nico.h@gmx.de> Found-by: Kevin Keijzer <kevin@quietlife.nl> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51118 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kevin Keijzer Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-03-01mb/: Drop print of MAINBOARD_PART_NUMBERKyösti Mälkki
Change-Id: Ie3870bc666acaea316f00b205de512cf790e720c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50718 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2021-02-24mb/lenovo/x220: Increase MMIO spaceArthur Heymans
With an external GPU connected via the expresscard slot this is required. Change-Id: I154721ff2c712cfe7eb79b8bf8943182c8c36548 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51005 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-02-20AGESA,binaryPI boards: Drop _SI scope with _SST in ASLKyösti Mälkki
Change-Id: I0fca35753c93ba928a0f67bb68a6cfdc26c0e756 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50655 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-20AGESA,binaryPI boards: Move common PCBA in ASLKyösti Mälkki
Change-Id: I9d502882c4ddb54af1da42a41591804da2cee0ac Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50647 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-20AGESA,binaryPI boards: Drop unused variables in ASLKyösti Mälkki
Change-Id: I1d1323ab8bb8565c05fd50697e29c61f9932a2c7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50646 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-20sb,soc/amd: Drop OSFL method in ASLKyösti Mälkki
Variable OSVR had a static value of 3 and OSFL() did not actually call _OSI or _OS methods. The conditional in HDA _INI method of OSVR is dropped and use of DMA NoSnoop attribute remains disabled to retain previous behaviour. For soc/amd/picasso a different decision was made in CB:40782 as HDA _INI method was just dropped and default configuration enables use of DMA NoSnoop attribute. Change-Id: I967b7b2afbb43253cccb4b77f6c44db45e2989e4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50592 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-17mb: guard irq_tables for clang-formatPatrick Georgi
Some (notably older Intel) boards use a tabular description of irq routing that we want to keep pristine no matter what clang-format considers correct (as that's ugly). Change-Id: I259255a9f60208c659b658ecb81535e84a2aaa8c Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50545 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2021-02-14AGESA,binaryPI boards: Drop OSV in ASLKyösti Mälkki
Not referenced anywhere in ASL. Change-Id: I52ac4722e48e1cc377386316dc034fb45a98181a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50471 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-12haswell boards: Correct USB config indentationAngel Pons
Change-Id: I72b717a41c5611cf578ce178722029b8646cbb35 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50539 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-12haswell: Drop `mainboard_fill_pei_data`Angel Pons
Use global variables to provide mainboard USB settings, and have the northbridge code copy it into the `pei_data` struct. For now. To minimize diffstat noise, this patch does not reindent the now-global mainboard USB configuration arrays. This is cleaned up in a follow-up. Change-Id: I273c7a6cd46734ae25b95fc11b5e188d63cac32e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50538 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-12mainboard: Drop unneeded `default_brightness_levels.asl`Angel Pons
Desktop boards do not have any backlight control. Change-Id: Ie9f5f4d7e6ae09b3d664d53e4c03157fd4ed088e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50501 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-02-12sandybridge MRC boards: Drop channel disable masksAngel Pons
Platform code will overwrite these values anyway, so do not program them in mainboards. Change-Id: I7571d336a1402c6cfae5835a95dc706a28106271 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49751 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-11sb/intel/ibexpeak: Drop Global NVS supportAngel Pons
Was copy-pasted from bd82x6x and no mainboard actually needs it. The few globals moved outside the GNVS will be removed, relocated or replaced with acpigen later. Change-Id: I590a355f1bd1e54365b2e329cfdc62384446a15c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49280 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-11ACPI: Move PICM declarationKyösti Mälkki
Variable PICM was not inside GNVS region and can use a static initialisation value. For most AMD platforms PICM default changes from 1 to 0. Fix comments about PICM==0 used to indicate use of i8259 PIC for interrupt delivery. Change-Id: I525ef8353514ec32941c4d0c37cab38aa320cb20 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49905 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-11mainboards: Drop PWRS from GNVSKyösti Mälkki
Initialize variable to 1 to indicate AC power supply. If platform has EC it will set this correctly based on whether plugged on the charger or not. Change-Id: I3f834cf7563b9e512fcab34cdb7a27a9f0fd31c0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49352 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-10nb/intel/sandybridge: Use common {DMI,EP,MCH}BAR accessorsAngel Pons
Drop unused sandybridge.h includes to avoid build failures on Ironlake. Tested with BUILD_TIMELESS=1, Asus P8Z77-V LX2 remains identical. Change-Id: If2f0147fe50266e2fe2098cafdf004e51282f5e2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-02-07sb/intel/bd82x6x: Support ME Soft Temporary Disable ModeEvgeny Zinoviev
- Add support for ME Soft Temporary Disable Mode. In this mode, ME doesn't load its kernel and freezes at Bring UP (BUP) phase. This mode is saved in ME NVRAM (and thus will remain for next reboots and poweroffs). - Add support of new CMOS option for Sandy Bridge and Ivy Bridge ThinkPads. HOW TO USE To disable ME: 1. nvramtool -w me_state=Disabled 2. reboot To enable it back: 1. nvramtool -w me_state=Normal 2. reboot To check current status: intelmetool -m Tested on ThinkPad X230 and ThinkPad X220. BACKGROUND There's no Intel documentation that would explain how this should be implemented, in public. Working binary sequence for MKHI command to put ME in Soft Temporary Disable Mode, as well as a way to bring ME out of it (by writing to H_GS register), was found and published by researchers from PT Security: 1. To disable ME, BIOS issues the disable command (before End of Post) and reboots. ME is supposed to be disabled on the next boot after DID (DRAM Init Done). My numerous tests show that issuing the command and rebooting is not enough. If we reboot too early, ME will not be disabled. Apparently, it is doing something in background after receiving the command. It works with a delay of 500-1000 ms. I also tried to dump all known (documented) registers, such as GMES and HFS, before and during the next 2 seconds after execution of the disable command to find a possible indication that something's changed in ME and we're ready to reboot. Found nothing unfortunately. 2. To enable ME back, host writes value 0x20000000 to H_GS. PT slides don't contain any more information on it, but my tests show, that after writing this value, GMES[31:28] is changing from 0x01 (BUP phase) to 0x03 (Policy Module) to 0x06 (Host Communication). Then, after some more time, fw_init_complete bit of HFS becomes 1. This means that ME starts loading its kernel immediately, without reboot. On the other hand, Lenovo BIOS clearly perform a reboot after enabling it (one reboot after saving the settings, then ThinkPad logo appears, and then one more reboot). I'm assuming we have to reset too. Change-Id: Ic01526c9731cbef4e8552bbc352133a2415787c2 Signed-off-by: Evgeny Zinoviev <me@ch1p.io> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37115 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>