summaryrefslogtreecommitdiff
path: root/src/mainboard/lenovo
AgeCommit message (Collapse)Author
2017-07-02mb/lenovo/t400/dock: Control LEDsPatrick Rudolph
Toggle LEDs after successful dock and undock. On boot the LED will light up and on undock button press the LED will turn off again. Tested on Lenovo T500. Change-Id: Ib5851f4abcedf4041faae6b3b810102012f488cd Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20327 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-06-27mainboard/lenovo/x220: allow to use libgfxinitAlexander Couzens
Change-Id: I8b02596b116c0b164e83e7b02449c547224a50a6 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/20330 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-06-16mb/lenovo/t430: Enable libgfxinitPatrick Rudolph
Enable libgfxinit. Tested on Lenovo T430: * LVDS * VGA * DP (using DP->HDMI adapter) All three ports are working. The LVDS port is garbled under linux when VGA or DP is connected, likely due to missing VBT. Change-Id: I665661e93724072d1e8412cfcc0e818f824c8cb0 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20117 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-06-15nb/intel/gm45: Don't allow too low values for gfx_uma_sizeArthur Heymans
Too low gfx_uma_size can result in problems if the framebuffer does not fit. This partially reverts: 7afcfe0 "gm45: enable setting all vram sizes from cmos" Change-Id: I485d24198cb784db5d2cfce0a8646e861a4a1695 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/20194 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-06-12nb/intel/gm45: Add romstage timestampsArthur Heymans
Change-Id: I558e6c63caf95ec5279ec5a866b54fb199116469 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19678 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-06-06mb/*/*/cmos.layout: Make multibyte options byte alignedArthur Heymans
Changes the offsets of some options so that options that span multiple bytes are byte aligned. To make the cmos.layout file more consistent some things where moved around in the cmos.layout of thinkpads X200 and T400. Change-Id: Ic84a2a5dc6f9c102f041085871c2ed55e2f3692a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18321 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-06-03mb/lenovo/*/cmos: Remove unused option and checksum fixPatrick Rudolph
Fix for all Sandy-Bridge and Ivy-Bridge devices. Remove unused option "hyper_threading". Increase CMOS checksum range to cover all user adjustable settings. Change-Id: I02f7af13d9c82d7f531d4b49b3bc0e5a20c14b55 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19955 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-06-02Kconfig: Introduce HAVE_(VBE_)LINEAR_FRAMEBUFFERNico Huber
Like HAVE_VGA_TEXT_FRAMEBUFFER, these are selected by graphics drivers that support a linear framebuffer. Some related settings moved to the drivers (i.e. for rockchip/rk3288 and nvidia/tegra124) since they are hardcoded. Change-Id: Iff6dac5a5f61af49456bc6312e7a376def02ab00 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/19800 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-02Kconfig: Rework MAINBOARD_HAS_NATIVE_VGA_INIT_TEXTMODECFGNico Huber
* Rename it to HAVE_VGA_TEXT_FRAMEBUFFER. * Let drivers select it if they are in charge. * Don't select it on the mainboard level if a driver handles it. Change-Id: I2d9d09be9aa6d019e77460e69a245ad2d8cda4ea Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-31mb/lenovo/t430: Fix PCIe hot-plug portsPatrick Rudolph
Port 0 is connected to SD-card reader. Don't mark it as hot-plugable. Change-Id: I5d3d4c7541683a6c09aac47ca251a6dad23ad1ab Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19928 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-05-27mb/lenovo/*/smihandler: Get rid of mainboard_io_trap_handlerPatrick Rudolph
Get rid of mainboard_io_trap_handler. The only purpose is to enable tp-smapi, but is already done on all boards in h8_enable, as of devicetree setting config0. Change-Id: I33fd829a7e34aefa8f76ca6020cc8e802f7aab17 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19790 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-25mb/lenovo/*60: Remove not existing DIMMs from SPD mapArthur Heymans
Should result in a tiny speed bump in raminit since those addresses are not checked for present DIMMs. Checked in schematics of both Thinkpad X60 and T60 and tested to configure raminit correctly for all DIMMs populated on X60. Change-Id: I56c4f3176541bc75a8de3aac9f87526a77fc819b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-05-25mb/lenovo/x200/blc: Add LTD121EQ3B panel at 447HzNico Huber
Change-Id: Ia44097f32f74ffd749219415984224ce33d9252b Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/19816 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-05-21mb/lenovo/*/romstage: Remove COM IO portPatrick Rudolph
All those boards do not have a serial port. Don't attempt to decode the COMA/COMB IO range. Change-Id: Ide7e818f87e70e3f559d0769ccde89c35da961d6 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19571 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-21mb/lenvovo/*: Clean mainboard.c and devicetreePatrick Rudolph
* Move board specific SPI registers to devicetree * Remove unused headers * Remove obsolete methods * Fix coding style * Fix Thinkpad L520 SPI lvscc register Except for Thinkpad L520, no functional change has been done, just moving stuff around. Change-Id: I692a5632030fe2fedbe9a90f86251000f1360fb2 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19494 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-21mb/*/romstage: Don't lock ETR3 CF9GR in early romstagePatrick Rudolph
Do not lock ETR3 CF9GR in early romstage. As of Change-Id: I2cb30267a6342db1f3b11715034219ffb18ca678 this is done in bd82x6x's finalize handler. Change-Id: Iea091511f0d2a6128d3a19e9413090c85e4c2e57 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19570 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-19mainboard/lenovo/t430: Add Thinkpad T430 supportPhilipp Deppenwiese
Tested and working: * HDD LED * Booting GNU Linux 4.9 from HDD using SeaBios * Booting GNU Linux 4.9 from USB using SeaBios * Native GFX init * All Fn function keys * Speakers * PCIe Wifi * Camera * WWAN * Fan (Dynamic Thermal Managment) * Flashing using internal programmer * Dual memory DIMMs running at up to DDR3-1866 * AC events * Touchpad, trackball and keyboard * USB3 ports running at SuperSpeed * Ethernet * Headphone jack * Speaker mute * Microphone mute * Volume keys * Fingerprint sensor * Lid switch * Thinklight * TPM (disable SeaBios CONFIG_TCGBIOS) * CMOS options: ** power_on_after_fail ** reboot_counter ** boot_option ** gfx_uma_size ** usb_always_on Untested: * Booting Windows * Hybrid graphics * Docking station * VGA Broken: * Wifi LED is always on Change-Id: I5403cfb80a57753e873c570d95ca535cf5f45630 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/18011 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-19mb/lenovo/t400: Generate undock event with dock buttonArthur Heymans
Change-Id: I1161ed5f5c30201d2ad156d8fce4e8a90e65bff6 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19551 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-11mb/lenovo/x60/t60: Remove `fn_ctrl_swap` optionNico Huber
The EC doesn't support it. Change-Id: Id2964002406a5fcf992f0ffc3627e3f66a2bb13f Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19654 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-11mb/lenovo/x201: Add support for ThinkLightStefan Ott
The thinkpad-acpi driver uses the UCMS (CMOS) ACPI method to control the ThinkLight from the Operating System. This patch adds partial support for that method, enough to enable or disable the ThinkLight: echo on >/proc/acpi/ibm/light echo off >/proc/acpi/ibm/light With the original BIOS the UCMS method exposes a wide range of values through a generic /proc/acpi/ibm/cmos interface. With the changes suggested in this patch that interface is also exposed but only accepts the commands to enable or disable the ThinkLight; all other commands are ignored. This change would potentially benefit all currently supported Thinkpad models, I only have an X201 available for tests though. Change-Id: I80285f6630b5830766d82e3ecd174c4a51aa9066 Signed-off-by: Stefan Ott <stefan@ott.net> Reviewed-on: https://review.coreboot.org/19644 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-05-11nb/intel/gm45: Define and use default MMCONF_BASE_ADDRESSArthur Heymans
Change-Id: I2308b069b8f2c601254169bcb6a34442c537a311 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19649 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-11nb/intel/i945: Define and use a default MMCONF_BASE_ADDRESSArthur Heymans
Change-Id: I15550b1cc1a7ccfecba68a46ab2acaee820575b9 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19648 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-10mb/lenovo/s230u: fix sata port map for the msata portpersmule
s230u seems only have two sata ports: one for the 2.5in hdd and one for msata. map 0x11 (port 0 & 4) enables hdd but not msata, and map 0x5 (port 0 & 2) enables both. Change-Id: I1e9e96f0d0849b1e8c4e02aa4f686ceb5e10b3ab Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/19523 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2017-05-04mb/lenovo/x200: Make button on dock to undock workArthur Heymans
Fetched from vendor DSDT. Change-Id: Ib74408802e977d9caabcb815c9cbd06bd8dbe395 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19539 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kevin Keijzer <kevin@librepractice.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2017-05-03nb/intel/gm45: Set display backlight according to EDID stringArthur Heymans
Add some known good values for some thinkpads displays. Known good means that at this pwm frequency the display is evenly lit on all duty cycles, the display makes minimal to no noise at lower duty cycles and the display does not flicker. This values differs from vendor (which uses an obviously wrong display clock (190MHz instead of 320MHz) resulting in frequency more than 60% off the intended value. TESTED on Thinkpad X200 with edid ascii string in list and removed from list to see if notice message is shown. Change-Id: Id7bc0d453fac31e806852206ba2c895720b2c843 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19500 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-01mb/*/mainboard.c: Get rid of SPI AFC registerPatrick Rudolph
The AFC—Additional Flash Control Register is set by southbridge code. Remove redundant calls and get rid of it in autoport. Change-Id: I627082e09dd055e3b3c4dd8e0b90965a9fcb4342 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19493 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-01mainboard: add support for lenovo x1 carbon gen 1Alexander Couzens
Based on Thinkpad x230 and schematics. Verified by autoport. USB debug port is the left front usb port Thanks to Holger Levsen for the device. Change-Id: I97c8e01a3ce0577d7dc9e8df7d33db3b155fe3d6 Tested-on: lenovo x1 carbon gen 1 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/16994 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-04-24mb/lenovo/x230: Enable libgfxinitIru Cai
Tested on X230 with an external screen connected to every one of the DP ports (miniDP on mainboard, two DP ports on dock), the GRUB payload can display on both the external screen and the internal LVDS screen. This is a copy-paste of I8e02c8003ff745d05ee272c59377174847f5219c. Change-Id: I8f270d558668c1fe41bcdcc7d6d2aa7f053c85b6 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/19412 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-04-24*.asl: Remove obsolete reference to TPM ASL filePatrick Rudolph
TPM ACPI entries are automatically generated, and the old static TPM ASL file is obsolete. Remove the reference to this obsolete static and empty ASL file. Delete src/drivers/pc80/tpm/acpi/tpm.asl. Change-Id: I6163e6d59c53117ecbbbb0a6838101abb468de36 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19291 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-04-21mb/lenovo/t420: Enable libgfxinitNico Huber
In the single GPU configuration, the T420 has an LVDS port, one DP++ and one VGA port connected to the IGD. Docking solutions feature up to two additional DP/DVI-D ports, also directly connected to the IGD. This makes the list of ports to probe pretty long (takes about 70ms if nothing but LVDS is connected). We could save about 20~30ms if we'd limit the ports in case we are not docked or have a discrete GPU. Change-Id: I8e02c8003ff745d05ee272c59377174847f5219c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/19378 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-04-17mb/lenovo/t60: Remove PCI reset code from romstagePaul Menzel
Commit bf264e94 (i945:) adds a PCI reset to the romstage, and commit bc8613ec (Fix i945 based boards) fixes that to use the correct delay of 200 ms. This code was then copied over, when adding support for the Lenovo T60. The reset was related to the shipped crypto card on the Roda RK886EX and Kontron 986LCD-M, so is not needed on the Lenovo T60. So remove it, to reduce the boot time by 200 ms. The same change is done for the Lenovo X60 in commit 7676730b (mb/lenovo/x60: Remove PCI reset code from romstage). Change-Id: Ifff43f095a1236c9e9a9ef0687e8efe42e72c971 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/19298 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-04-07nb/intel/i945: Move INTEL_EDIDPatrick Rudolph
All boards select INTEL_EDID, move it to nb folder. Change-Id: I35f075a87f2d841856b208f9440cf41af6a3c8e6 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19086 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-04-07mb/lenovo/x201: Link gpio map instead of including a headerArthur Heymans
Linking should allow to link depending on possible future variants. E.g. in Makefile.inc romstage-$(CONFIG_'VARIANT0') += gpio_variant0.c etc. Change-Id: I88b5ef8e12ac606751952a493f626e1b146e98f7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19139 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-03-28lenovo/g505s: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: I857486cb80bc01e695ac9592a0a0dc577dfc0d12 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18715 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-28AGESA: Introduce AGESA_LEGACY and its counterpartKyösti Mälkki
We define AGESA_LEGACY as an implementation of mainboard that has its romstage main completely under mainboard/ directory. We have learnt from other platforms this approach has several downsides when it comes to making platform-wide improvements. We start by creating per-family romstage.c file, which boards will gradually take into use by removing the AGESA_LEGACY Kconfig option we here apply to all of them. Change-Id: Id01931e185a023039a60af16a678de9966db8d65 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18619 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-26mb/lenovo/s230u: Fix USBDEBUG checkMartin Roth
- Change preprocessor #if to standard C if. This will get optimized out if the config option is disabled, but lets the compiler check the contents. - CONFIG_USBDEBUG is always going to be defined even if it's disabled, so this check is not going to work as expected. See the coreboot Kconfig documentation in /Documentation/core/Kconfig.md Change-Id: Ia63438d9525e79307d9229ad3ffa2962978611d8 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/18974 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Tested-by: build bot (Jenkins)
2017-03-18nb/i945/gma.c: Refactor panel setupArthur Heymans
This reuses some of gm45 code to set up the panel. Panel start and stop delays and pwm frequency can now be set in devicetree. Linux does not make the difference between 945gm and gm45 for panel delays, so it is safe to assume the semantics of those registers are the same. The core display clock is computed according to "Mobile Intel® 945 Express Chipset Family" Datasheet. This selects Legacy backlight mode since most targets have some smm code that rely on this. This sets the same backlight frequency as vendor bios on Thinkpad X60 and T60. A default of 180Hz is selected for the PWM frequency if it is not defined in the devicetree, this might be annoying for displays that are LED backlit, but is a safe value for CCFL backlit displays. Change-Id: I1c47b68eecc19624ee534598c22da183bc89425d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18141 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-03-11lenovo/t400/dock.c: Fix issues found by checkpatch.plPaul Menzel
Change-Id: If7ebab8af1ae0c048cb89c2feb5f6a65848b6952 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/18767 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-03-11lenovo/t400: Rewrite dock from t60Kyösti Mälkki
Old dock.c copied from x201 was incorrect. Do a rewrite of t60 dock code as pnp devices. Fixes USB and serial on the dock, if it is already connected when computer is powered on. DVI and ethernet worked without this patch. Hot-plug is yet to be fixed. Change-Id: Ib20a0eff10d0cde92dd089baf4fca28b117dc999 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18054 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-03-07AGESA: Add agesa_helper.h headerKyösti Mälkki
These definitions do not require AGESA.h include, and we will eventually remove agesawrapper.h files. Change-Id: I1b5b78409828aaf2616e177bb54a054960c3869f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18588 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-03-07AGESA: Remove leftover s3resume includeKyösti Mälkki
Change-Id: I7a1574259f73a52b66d03c686ae8ab70345c36ed Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18586 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-03-07AGESA: Remove leftover agesawrapper includeKyösti Mälkki
Change-Id: Ib37989ee7535e59b1903537995f8383d8b04387c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18584 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-02-28mainboard/lenovo: Power off USB and mute audio before entering S3Nicola Corna
Currently, the USB ports are still powered during S3, so turning them off may reduce the power consumption. Note that, when the USB Always on feature is enabled, the USB ports are always powered, regardless of the USBP state. This patch also disables the audio, as it might consume some power or generate some noise. Both the USB power and the audio are reenabled by coreboot during the poweron. Change-Id: If0431b1315fffef2e372e7023f830a66bb7fddae Signed-off-by: Nicola Corna <nicola@corna.info> Reviewed-on: https://review.coreboot.org/18464 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2017-02-28Select a default SeaBIOS PS2 timeout in H8 KconfigArthur Heymans
This timeout is probably needed on all devices with Lenovo H8 embedded controllers so set the default there. Change-Id: I830ab1894f7c0f10f55c82e398becf44d810852d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18274 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2017-02-20lenovo/s230u: Add Thinkpad Twist (S230U)Tobias Diedrich
Created using autoport plus some manual work and copying from G505S to account for the non-H8 EC. This model uses the same ENE KB9012 EC as the G505S. Tested: - Mainboard variant with 8GB Elpida DDR3 - SeaBIOS payload - Booting into Linux 4.9.6 with Debian/unstable installed on the internal HDD/SDD slot - Native raminit - Both native VGA init and option rom VGA init - Basic TPM functionality (auto-detection and RNG) - Battery status readout - Basic ACPI functions (power button event; power-off; reboot) - thinkpad-acpi hotkey functions - thinkpad-acpi LED control (red thinkpad LED) - Suspend to RAM and resume works - Mini displayport output works Known issues: - Patches needed for EC battery support https://review.coreboot.org/#/c/18348/ https://review.coreboot.org/#/c/18349/ - No thermal zone since temperature sensing is not H8-compatible and needs to be reverse engineered. Not tested: - msata/wwan (probably works) Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Change-Id: I52bc4515277e5c18afbb14a80a9ac788049f485c Reviewed-on: https://review.coreboot.org/18351 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-02-19mb/lenovo/t400: Implement hybrid graphic in romstageArthur Heymans
The hybrid driver select by DRIVERS_LENOVO_HYBRID_GRAPHICS doesn't work for t400/t500. Replace it with a custom romstage implementation. Tested on Lenovo T500 with dual graphics: * Intel Native GFX init * AMD VBios * GNU Linux 4.8.13 * SeaBios as payload * Discrete is working (44 W) * Integrated is working (24 W) * Switchable is working (34 W) ** Both GPUs are enabled, with Intel being connected to the panel ** DRI_PRIME allows to use AMD GPU ** ACPI doesn't seem to work (no vgaswitcheroo) Depends on Change-Id: I4dc00005270240c048272b2e4f52ae46ba1c9422 Depends on Change-Id: If389016f3bb0c4c2fd0b826914997a87a9137201 Change-Id: I7496876e9b434d4a2388e1ede27ac604670339b7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/18010 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2017-02-04lenovo/x60: use correct BLC_PWM_CTL valueFrancis Rowe
Bit 16 in BLC_PWM_CTL enables brightness controls, but the current value is generic. Use the proper value, obtained by reading BLC_PWM_CTL while running the VBIOS. Change-Id: Ib273359e1c285b405a9bb26fc217c2f7e255b99f Signed-off-by: Francis Rowe <info@gluglug.org.uk> Reviewed-on: https://review.coreboot.org/10624 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-02-03mb/lenovo/x60,t60: Move EC CMOS parameters in checksummed spaceArthur Heymans
This allows for defaults to be applied to CMOS parameters when cmos checksum is incorrect. This probably results in changed cmos settings for current users of these targets. Change-Id: Ifec0093f4b0dbaa51b96812a041f0eaf5c58ee86 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17041 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-24mainboard/lenovo: Add new port L520Patrick Rudolph
Add support for Lenovo Thinkpad L520. The files are generated by autoport, and are successfully tested on the board. L520 has got 4MiB flash chip, that contains a "slim" ME with 1.2MiB only. The flash IC has to be desoldered, as it won't be accessible in circuit. It is located on top of the mainboard right under the touchpad. Test-setup: Extract the following blobs from vendor BIOS: * Intel Flash Descriptor * Intel Management Engine * Intel VBios The laptop has been externaly flashed. It was able to turn on the display and load SeaBIOS. Latest debian has been booted from harddisk. Latest fedora has been booted from USB flash drive. The following hardware has been tested and is working: * Display using Option Rom * PCIe wifi * Ethernet * Keyboard, trackpoint and touchpad * Some Fn functions keys * Volume Keys (except mic mute) * Status LEDs * Audio (headphone jack only) * USB ports * Native raminit dual channel (2 DDR3-1333 DIMMs tested) * SATA cdrom * SATA harddrive Broken: * Some Fn functions keys * Microphone mute button * Speakers (but headphone jack gives sound) Untested: * Expansion slot * SD card slot * Docking station * Native gfx init The EHCI debug port is the first one on the right side. Change-Id: Ic8943799b953bde09ff1daf8427ce5125a0778ca Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/18003 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-01-13mb/lenovo/t400,x200,x201: Do not select DRIVERS_ICS_954309Arthur Heymans
This driver to configure the clock generator is not used. Change-Id: I156a42dfc336ff45acdcb6d8618bbd12671b66a7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18104 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-01-10mb/lenovo/t400: Increase MAX_CPUS to 4Arthur Heymans
The Lenovo T400 has a CPU socket that can fit quad cores. Change-Id: I585775ac9510cc7d2c2d731531f536c1a56b81e8 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18059 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-01-06sb/ich7: Use common/gpio.h to set up GPIOsArthur Heymans
This is more consistent with newer Intel targets. This a static struct so it is initialized to 0 by default. To make it more readable: * only setting to GPIO mode is made explicit; * only pins in GPIO mode are either set to input or output since this is ignored in native mode; * only output pins are set high or low, since this is read-only on input; * blink is only operational on output pins, non-blink is not set explicitly; * invert is only operational on input pins, non-invert is not set explicitly. Change-Id: I05f9c52dee78b7120b225982c040e3dcc8ee3e4e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17639 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-12-26amd-based mainboards: Fix whitespace in _PTS commentsMarshall Dawson
Correct tabs that were intended as spaces. Change-Id: Idcf33d829f87a866b5ed880527102918d5b93842 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/17905 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-12-22agesa and binaryPI mainboards: Fix devicetree hudson commentsMarshall Dawson
Make the ending comment associated with "chip ...hudson" match the appropriate directory name. Change-Id: I5e0d6d41a2e3f963760aad08ed6108acac5b66b3 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/17904 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-12-20mb/lenovo/x60: Remove PCI reset code from romstagePaul Menzel
Commit bf264e94 (i945:) adds a PCI reset to the romstage, and commit bc8613ec (Fix i945 based boards) fixes that to use the correct delay of 200 ms. This code was then copied over, when adding support for the Lenovo X60. The reset was related to the shipped crypto card on the Roda RK886EX and Kontron 986LCD-M, so is not needed on the Lenovo X60. So remove it. TEST=Build and boot on Lenovo X60t. Change-Id: Ia37d9f0ecf5655531616edb20b53757d5d47b42f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/17703 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-12-18intel cache-as-ram: Move DCACHE_RAM_BASEKyösti Mälkki
Having same memory region set as both WRPROT and WRBACK using MTRRs is undefined behaviour. This could happen if we allow DCACHE_RAM_BASE to be located within CBFS in SPI flash memory and XIP romstage is at the same location. As SPI master by default decodes all of top 16MiB below 4GiB, initial cache-as-ram line fills may have actually read from SPI flash even in the case DCACHE_RAM_BASE was below the nominal 4GiB - ROM_SIZE. There are no reasons to have this as board-specific setting. Change-Id: I2cce80731ede2e7f78197d9b0c77c7e9957a81b5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17806 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-13lenovo: Don't use extern with functionsKyösti Mälkki
Change-Id: I8313ba1d93922297e5061701dad47d07617d1dcd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17804 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-13mb/lenovo/*00: Remove Roda/RK9 specific codeNico Huber
Change-Id: Iacf2e1c0b8003a3588ccbf79e17500ed12f39503 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/17786 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-12-11nb/intel/i945: Make pci_mmio_size a devicetree parameterArthur Heymans
Instead of hardcoding pci_mmio_size in the raminit code, this makes it a parameter in the devicetree. A safe minimum of 768M is also defined since using anything less causes problems (if 4G of ram is used). Change-Id: If004c861464162d5dbbc61836a3a205d1619dfd5 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/16856 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-12-11intel/nehalem: Use romstage_handoff for S3Kyösti Mälkki
Don't use scratchpad registers when we have romstage_handoff to pass S3 resume flag. Also fixes console log from reporting early in ramstage "Normal boot" while on S3 resume path. Change-Id: I2f1f05ef4fc640face3d9dc92d12cfe4ba852566 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17676 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-11intel/i945: Use romstage_handoff for S3Kyösti Mälkki
Don't use scratchpad registers when we have romstage_handoff to pass S3 resume flag. Scratchpad register was read too late in ramstage so acpi_is_wakeup_s3() did not evaluate correctly. This fixes low memory corruption at 0x1000-0x102c and the lack of coreboot tables (util/cbmem not working) after S3 resume. This also fixes console log from reporting early in ramstage "Normal boot" while on "S3 resume" path. Change-Id: I2922a15a90d2f8272c3482579bdd96f8f33e9705 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17675 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-11intel/gm45: Use romstage_handoff for S3Kyösti Mälkki
Don't use scratchpad registers when we have romstage_handoff to pass S3 resume flag. Also fixes console log from reporting early in ramstage "Normal boot" while on S3 resume path. Change-Id: I4e2eabc59ff87b7ed40cfc9885bbe0256fe4a695 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17674 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-11intel i945 gm45 x4x post-car: Use postcar_frame for MTRR setupKyösti Mälkki
Adapt implementation from skylake to prepare for removal of HIGH_MEMORY_SAVE and moving on to RELOCATABLE_RAMSTAGE. With this change, CBMEM region is set early-on as WRBACK with MTRRs and romstage ram stack is moved to CBMEM. Change-Id: Idee5072fd499aa3815b0d78f54308c273e756fd1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15791 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-06cpu/x86/msr.h: Drop excessive includesKyösti Mälkki
Change-Id: Ic22beaa47476d8c600e4081fc5ad7bc171e0f903 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17735 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-06cpu/cpu.h: Drop excessive includesKyösti Mälkki
Change-Id: Ifeef04b68760522ce7f230a51f5df354e6da6607 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17734 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-05mainboard & southbridge: Clear files that are just headersMartin Roth
These headers & comments indicating a lack of functionality don't help anything. We discourage copyrights and licenses on empty files, so just clear these. Change-Id: Id2ab060a2726cac6ab047d49a6e6b153f52ffe6d Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17657 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-12-01AGESA: Switch to MMCONF_SUPPORT_DEFAULTKyösti Mälkki
Vendorcode always does PCI MMCONF access once it is enabled via MSR. In coreboot proper, we don't give opportunity to make pci_read/write calls before PCI MMCONF is enabled via MSR. This happens early in romstage amd_initmmio() for all cores. Change-Id: If31bc0a67b480bcc1d955632f413f5cdeec51a54 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17533 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-21lenovo/x200/board_info.txt: Add SOIC-8 to ROM packageMichał Masłowski
Some X200 use a 4 MiB SOIC-8 flash chip. Change-Id: Ie5bd359ef08cf1be369a026be376c21555d0ea18 Signed-off-by: Michał Masłowski <mtjm@mtjm.eu> Reviewed-on: https://review.coreboot.org/8391 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-11-20intel sandy/ivy: Improve DIMM replacement detectionKyösti Mälkki
When MRC cache is available, first read only the SPD unique identifier bytes required to detect possible DIMM replacement. As this is 11 vs 256 bytes with slow SMBus operations, we save about 70ms for every installed DIMM on normal boot path. In the DIMM replacement case this adds some 10ms per installed DIMM as some SPD gets read twice, but we are on slow RAM training boot path anyways. Change-Id: I294a56e7b7562c3dea322c644b21a15abb033870 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17491 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2016-11-18ec/lenovo/h8: Add USB Always OnNicola Corna
USB AO is the internal name for the dedicated charging port on ThinkPads when in S3 or lower. AOEN (bit 0) is internal name for enabling this feature while AOCF (bits 2 and 3) is the configuration field. According to Peter Stuge, AOCF can be configured in this way: 00 => AC S3 S4 S4 USB on, battery S3 USB on, battery S4 S5 off 11 => AC S3 S4 S4 USB on, battery S3 S4 S5 USB off 10, 01 => equivalent to 00 This commit also adds a new configuration field in the CMOS of the X220 and the X201 to activate this feature. It probably can be also added to all the ThinkPads that support this functionality. With this functionality USB devices are able to negotiate full power from the dedicated port (usually the yellow one) even in S3. Tested on a X201 and X220 with an Android smartphone: with this feature enabled it shows "Charging" when connected during S3, without it it shows "Charging slowly" (or it doesn't charge at all on the X201). For some reasons the "AC only" mode doesn't work, so it has been disabled. Change-Id: Ie1269a4357e2fbd608ad8b7b8262275914730f6e Signed-off-by: Nicola Corna <nicola@corna.info> Reviewed-on: https://review.coreboot.org/17252 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-08mb/lenovo/t400: use socket mPGA478MN instead of BGA945Arthur Heymans
The T400 features a socket P (mPGA478MN) and could potentially support model_6fx CPUs. Change-Id: I24f3356aa213c29011953daed31f46404e7a4d9d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17155 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-26nb/gm45/gma.c: Remove writes to DP, FDI registersArthur Heymans
Those registers are only used on more recent Intel platforms featuring a PCH. The DP registers on G4X hardware are at a different offset. Change-Id: Ib49e54d4e7d6595dc09fb1be35ac8178b80c7f71 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17110 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-10-13x60,t60: do not add etc/ps2-keyboard-spinup for non-seabios payloadsArthur Heymans
Regardless of the payload chosen a file etc/ps2-keyboard-spinup is added to cbfs. With this fix this file is only added to cbfs when seabios is choses as a payload. Change-Id: I37cf4c998856db2d297356776752643dba46a8f8 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/16146 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2016-10-11lenovo/x60: CST table: use MWAIT requests instead of P_LVLx I/O readsArthur Heymans
Requesting low power acpi cpu c-states has two software interfaces: Using P_LVLx I/O reads or using equivalent MWAIT requests. This change makes it more consistent with newer targets that use MWAIT requests. There also exists extended intel acpi c-states which can be enabled in two ways: - using a substate hint to the mwait request (defined in bios); - setting a model specific register (msr) Currently this is done by setting the right msr bits but with this change one can experiment by adding substate hints. Change-Id: I9eeb5b008e2ddc2193725667f2c13582a4877e3c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/14801 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-04nb/gm45: allow use of 352M preallocated ram for igdArthur Heymans
The datasheets on gm45: "Mobile Intel® 4 Series Express Chipset Family" mention the possibility of having 352M ram preallocated for the integrated graphic device. This only worked fine if the amount of ram in the system was 3GB or less. When 4G or more is installed, memory is remapped to create a 1GB large pci mmio hole which is not enough and creates conflicts when 352M vram is used. This patch increases the pci mmio hole size on Lenovo x200 to allow 352M vram to work. TEST: build and flash on target with 4GB ram or more, use nvramtool to set gfx_uma_size to 352M and reboot. Change-Id: I5ab066252339ac7d85149d91b09a9eaaaab3b5b6 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/16831 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-26mainboard/*/*/dsdt.asl: Use tabs for indentsElyes HAOUAS
Change-Id: Idef587d8261784e916e8d50f4336cbcfca39b9b0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16730 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-26mainboard/*/*/mptable.c: Improve code formattingElyes HAOUAS
Change-Id: I341293cd334d6d465636db7e81400230d61bc693 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16723 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-26mainboard/*/*/irq_tables.c: Use tabs for indentsElyes HAOUAS
Change-Id: Idc29373cb01f4304d22ae315812bd40f0aaa94c9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16729 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-15lenovo: add ps2 spinup timeout to all H8S based boardsAlexander Couzens
The h8s needs around 3s to respond to ps2 commands Change-Id: I0cf01969975b8dd3839eadf90cb2dac0f1eaafc4 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/16505 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13lenovo/t60: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/lenovo/t60. The patch has been tested both with the arch/io.h definition of device_t enabled and disabled in order to ensure compatibility while the transaction takes place. Change-Id: I4d87498637d74f96ca5809b0e810755a58fc64ab Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/16405 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-12lenovo/t60: add hda_verb.cArthur Heymans
This creates a config for the Lenovo T60 sound card based on values taken from vendor bios (in /sys/class/sound/hwC0D0/init_pin_configs on linux 3.16). The sound card configuration on the vendor bios is the same as the one on the Lenovo x60. It improves the default behavior of the sound card: - internal microphone is chosen by default - when jack is inserted it is chosen instead of internal speaker Change-Id: I44e3eaac437fe4ad97ff2b0eb32d36b33222c09b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/16529 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2016-09-02lenovo/x60: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/lenovo/x60. The patch has been tested both with the arch/io.h definition of device_t enabled and disabled in order to ensure compatibility while the transaction takes place. Change-Id: Icaceeae2fc7276efa82d37582ecac93aaf37c41c Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/16372 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-02lenovo/x200,t400: use gpio.h instead of gpio_setupArthur Heymans
Uses gpio.h instead of default_southbridge_gpio_setup to configure southbridge GPIO's. This is more consistent with how GPIO's are configured on newer targets. Change-Id: I6ccd0564b929e958864739b7cde04f5592c58479 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/16379 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-31i945: Enable changing VRAM sizeArthur Heymans
On i945 the vram size is the default 8mb. It is also possible to set it 1mb or 0mb hardcoding the GGC register in early_init.c The intel documentation on i945, "Mobile Intel® 945 Express Chipset Family datasheet june 2008" only documents those three options. They are set using 3 bits. The documententation also makes mention of 4mb, 16mb, 32mb, 48mb, 64mb but not how to set it. The other non documented (straight forward) bit combinations allow to change the VRAM size to those other states. What this patch does is: - add those undocumented registers with their respective vram size to the i945 NB code; - make this a cmos option on targets that have this northbridge. TEST: build, flash to target, set cmos as desired and boot linux. On Debian it can be found using "dmesg | grep stolen". NOTE: dmesg message about reserved vram are quite different depending on linux version Change-Id: Ia71367ae3efb51bd64affd728407b8386e74594f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/14819 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-27lenovo/x200,t400: enable C4 cpu low power stateArthur Heymans
This enables the C4 low power state on the lenovo x200 and t400. It's inspired by the thread on the mailinglist: "[coreboot] Lenovo X200 running Coreboot drains 3-4W more power than with Vendor BIOS". What this does, is to enable a C3 state using MWAIT(C3) request and set the southbridge config c4onc3_enable to automatically upgrade C3 to the lower power C4 state. The latency (0x37) is the same value used by the vendor bios. With C4 enabled the idle power consumption is about ~2-3W lower. TEST= build and install on target. Use powertop top to measure power usage. To manually disable c-state to compare them, do (tested on linux 4.4): echo 1 > /sys/devices/system/cpu/cpu*/cpuidle/stateX/disable Change-Id: I1a1663a7662ebc7157a965667680688ad6a33545 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/15251 Tested-by: build bot (Jenkins) Reviewed-by: Swift Geek Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-08-17mainboard: Clean up boot_option/reboot_bits in cmos.layoutNico Huber
Since commit 3bfd7cc (drivers/pc80: Rework normal / fallback selector code) the reboot counter stored in `reboot_bits` isn't reset on a reboot with `boot_option = 1` any more. Hence, with SKIP_MAX_REBOOT_CNT_CLEAR enabled, later stages (e.g. payload, OS) have to clear the counter too, when they want to switch to normal boot. So change the bits to (h)ex instead of (r)eserved. To clarify their meaning, rename `reboot_bits` to `reboot_counter`. Also remove all occurences of the obsolete `last_boot` bit that have sneaked in again since 24391321 (mainboard: Remove last_boot NVRAM option). Change-Id: Ib3fc38115ce951b75374e0d1347798b23db7243c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/16157 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-by: York Yang <york.yang@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-14src/mainboard: Capitalize ROM, RAM, CPU and APICElyes HAOUAS
Change-Id: Ia1f24d328a065a54975adde067df36c5751bff2d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/15987 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-11lenovo/x60: add info message if dock is presentAlexander Couzens
Change-Id: I5a6d41f815f65719780499fa18c131311a9dc8f7 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/16136 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-08-11lenovo/x60: add GPIOs initialisation before dock checkAntonello Dettori
Add GPIOs initialisation before dock check. Needed in order to properly detect the presence or absence of the lenovo dock. Previously the check always reported the dock as connected and currently it always reports it as disconnected since the GPIOs are not properly initialised during the check. Tested and confirmed working. Change-Id: I7fbf8c2262a1eb5dee9cbe5e23bf44f7f8181009 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/16139 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-08-03lenovo/x60: Fetch 16 bits when trying to parse bit 13Patrick Georgi
I'm not sure if that's the right fix here, but assuming the bit mask is right, the inb is wrong. Change-Id: I7e33019af088780a09be12513200bec63734bf97 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1229556 Reviewed-on: https://review.coreboot.org/16026 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2016-08-01Add newlines at the end of all coreboot filesMartin Roth
Change-Id: I7930d5cded290f2605d0c92a9c465a3f0c1291a2 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15974 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-07-31mainboard: Format irq_tables.cPaul Menzel
Run the command below to format the files `irq_tables.c` of (mostly AMD) mainboards correctly with GNU indent 2.2.10. ``` $ git grep -l 'if (sum != pirq->checksum) {' | xargs indent -l ``` Fix up the following two checkpatch.pl errors manually. ``` ERROR: that open brace { should be on the previous line #1219: FILE: src/mainboard/gigabyte/ga_2761gxdk/irq_tables.c:129: + uint8_t reg[8] = + { 0x41, 0x42, 0x43, 0x44, 0x60, 0x61, 0x62, 0x63 }; ERROR: that open brace { should be on the previous line #1221: FILE: src/mainboard/gigabyte/ga_2761gxdk/irq_tables.c:131: + uint8_t irq[8] = + { 0x0A, 0X0B, 0X0, 0X0a, 0X0B, 0X05, 0X0, 0X07 }; ``` This is needed, so that follow-up commits, fixing checkpatch.pl errors and warnings, won’t run into conflicts with the git commit hooks, when for example, spaces instead of tabs are used for indentation. Change-Id: If254723f3013377fb3b9b08dd5eca6b76730ec4a Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/15932 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-07-31Remove extra newlines from the end of all coreboot files.Martin Roth
This removes the newlines from all files found by the new int-015-final-newlines script. Change-Id: I65b6d5b403fe3fa30b7ac11958cc0f9880704ed7 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15975 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-07lenovo/t530: Don't enforce native gfx initAlexander Couzens
Change-Id: I6d51f46240c62fcd6089411e8681e0b6e7d5bfe4 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/15222 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-07lenovo/t530: add VGA device ID 8086,0106Alexander Couzens
Change-Id: I3cffe9d832edbbea79cabca639d9d920b7ffcf9a Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/8178 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-06-26intel/nehalem: Use common ACPI S3 recoveryKyösti Mälkki
Change-Id: Ic82a732ba28ba24e42a635539cca3d76128b40b5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15247 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-06-26intel/gm45: Use common ACPI S3 recoveryKyösti Mälkki
Change-Id: I3148dbbcb06676f48b6bc357124403b70b9bcb6a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15246 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-06-22intel/model_2065x: Prepare for dynamic CONFIG_RAMTOPKyösti Mälkki
Change-Id: I616143b55d7c5726dc2475434e3fcb08b8d69bda Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15230 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-21intel/model_6ex: Prepare for dynamic CONFIG_RAMTOPKyösti Mälkki
Change-Id: I9bfaa53f8d09962d36df1e86a0edcf100bb08403 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15229 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-20nb/intel/sandybridge/raminit: Allow 933Mhz on Lenovo devicesPatrick Rudolph
Set max_mem_clock_mhz in devicetree to 933Mhz. Allows to run the memory at up to DDR3-1866. The same frequency was allowed within the first vendor bios, but Lenovo than decided to limit it to DDR3-1333. Tested on Lenovo T520 and DDR3-1600 DIMM (RMT3170eb86e9w16). The RAM is now running at DDR3-1600 instead of DDR3-1333. This gives about 4% performance increase in glmark2 using the Intel GPU. Change-Id: If15be497402d84a2778f0434b6381a64eda832d6 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/15158 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 19:03:15 +0000