summaryrefslogtreecommitdiff
path: root/src/mainboard/lenovo
AgeCommit message (Collapse)Author
2016-04-20mb/lenovo/x220: disable MEAlexander Couzens
The ME hangs, the lspci shows no memory and the linux kernel tries to request irq 0 twice. After suspend-resume the linux kernel warns about double used irq. genirq: Flags mismatch irq 0. 00000080 (mei_me) vs. 00015a00 (timer) mei_me 0000:00:16.0: request_threaded_irq failed: irq = 0. dpm_run_callback(): pci_pm_resume+0x0/0xa0 returns -16 PM: Device 0000:00:16.0 failed to resume async: error -16 Change-Id: I56ef66388e58dddcfb858294ba274621c55fbef6 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/14309 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2016-04-19kbuild: Allow drivers to fit src/drivers/[X]/[Y]/ schemeStefan Reinauer
Reorder drivers to fit src/drivers/[X]/[Y]/ scheme to make them pluggable. Also, fix up the following driver subdirectories by switching to the src/drivers/[X]/[Y]/ scheme as these are hard requirements for the main change: * drivers/intel * drivers/pc80 * drivers/dec Change-Id: I455d3089a317181d5b99bf658df759ec728a5f6b Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14047 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-13lenovo/t420: Add new portNicolas Reinecke
This is based on t420s. Tested on a T420 without discrete GPU. There is no support for nvidia gpu and optimus. Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Tested-by: Iru Cai <mytbk920423@gmail.com> Change-Id: Ie9405966e56180ac1c43a3c5b83181ee500177c8 Reviewed-on: https://review.coreboot.org/11765 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-06src/mainboard: Disable power_on_after_fail CMOS option for laptopsPhilipp Deppenwiese
power_on_after_fail=Enable in cmos.default leads to wake on AC behaviour on mobile systems. Therefore set cmos.default entry to "Disable" in order to improve user experience. Change-Id: I977a4e6bc028c8c4c7fc1c2f5fdd74a59e951c60 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/13884 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2016-03-21nb/intel/sandybridge: increase MMCONF_BASE_ADDRESSPatrick Rudolph
Set MMCONF_BASE_ADDRESS to 0xf8000000. It was already done for some boards, but not all. The sandybridge chipset code assumes 64 pci buses behind MMCONF. Therefore, only 64MiB of physical address space is required. Increasing the address allows to use additional 128MiB of MMIO space and to use the Intel IGD and a PEG at the same time. Previously it wasn't possible to use both at the same time, as two 256MiB areas won't fit into MMIO space. Test system: * Gigabyte GA-B75M-D3H * Intel Pentium CPU G2130 * Onboard GPU Intel IvyBridge Desktop * PEG GPU AMD RV770 Change-Id: I3bf72439056c8089ada6899bb0605e5cd9d89cd6 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/14096 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-03-15lenovo: add config ONBOARD_VGA_IS_PRIMARYPatrick Rudolph
Fix for the T4xx and T5xx series. It does not apply to X2xx/X6x series as those have only one GPU, which is always connected to the display. The T6x series needs special care not handled with this patch. Without ONBOARD_VGA_IS_PRIMARY the onboard GPU would be deactivated in case a dedicated GPU is found and active, leaving the system without a working display. Change-Id: I94d1700e9afb75de83a4f2ed1ff53ba3b0559ae1 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/14031 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
2016-03-05sandybridge/gma_lvds: support both Sandy&Ivy on one boardIru Cai
Sandy and Ivy Bridge processors use the same socket, and a mainboard with the socket can support both types of CPUs. However, they use different native graphics init code for LVDS and cause a crash if running the wrong code. This change detects the CPU type and then selects the right code to run. It will add some more code in ramstage. It also merges the {SANDY,IVY}BRIDGE_LVDS symbol to one SANDYBRIDGE_IVYBRIDGE_LVDS. Tested on a Lenovo T520 with i7-2630qm and i7-3720qm Signed-off-by: Iru Cai <mytbk920423@gmail.com> Change-Id: I4624759f9c92d56d547db1ab4b9a1d611a182a91 Reviewed-on: https://review.coreboot.org/12087 Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com> Tested-by: build bot (Jenkins)
2016-02-18southbridge/intel/bd82x6x: Use common gpio.cPatrick Rudolph
Use shared gpio code from common folder. Bd82x6x's gpio.c and gpio.h is used by other southbridges as well and will be removed once it is unused. Change-Id: I8bd981c4696c174152cf41caefa6c083650d283a Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13614 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-12Make MRC vs native a config rather than making a separate chipset for it.Vladimir Serbinenko
Tested by making lenovo x230 configurable despite pretty MRC bugs. Change-Id: Ia2a123f24334f5cd5f42473b7ce7f3d77c0e65b7 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13658 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-12Merge sandy/ivybridge romstage flow for MRC and non-MRC.Vladimir Serbinenko
Change-Id: I11e09804ed1d8a7ae8b8d4502bd18f6be933f9fa Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13656 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09sandybridge: Set all native gfx-related options in northbridge code.Vladimir Serbinenko
In the same time remove few native gfx options which were improperly set and only added dead code to the binary. Change-Id: I4ed3fec03a1655ae0a779c3aa3845de273cb12e1 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13649 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-02-09ivy: Add a possiblity for mainboard early init.Vladimir Serbinenko
This is needed for stout EC init. Change-Id: I5c73499c17763229840152a473a2d820802ee2f6 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13535 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09Workaround for unused variable warning.Vladimir Serbinenko
Change-Id: I0a0c925509027f98f724d0a4347146f21ac06c02 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13624 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09mainboard/lenovo: Add support for the Lenovo ThinkPad X220iChristopher Spinrath
The ThinkPad X220i is essentially identical to the ThinkPad X220 but it has a Sandybridge i3 (instead of a Sandybridge i5/i7) CPU and the VGA_BIOS_ID differs. Thus, support is added by using the X220 mainboard directory and setting the VGA_BIOS_ID in Kconfig. Change-Id: I33345a099c617e8c87a1de64b7254b7e7716ca90 Signed-off-by: Christopher Spinrath <christopher.spinrath@rwth-aachen.de> Reviewed-on: https://review.coreboot.org/13594 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2016-01-19lenovo/t400: Revise onboard IRQ routingNico Huber
All southbridge interrupt pin and routing registers (D*IP and D*IR) are left at their default values (see ICH9 datasheet) and this file just has to reflect them. Change-Id: I1e9732e178bb8422b284d80d9f3d34b72f2e2415 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/13040 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-14mb/lenovo/x200: Add panel power sequence valuesNico Huber
Values are taken from the vendor BIOS of my X200s. Notable effect: Stops display from flashing during native graphics init / Linux mode setting. Change-Id: Ie5d9efc010a78dd46317b6bbdb7bfacc2c9d2cbf Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/12886 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-14mainboard/lenovo: reserve century byteAlexander Couzens
The century byte is used by most RTC (default 0x32@nvram). Even the century byte can disabled via ACPI it's more safe to reserve it's space. Because some RTC will act with that byte anyhow. Some OS overwrite it when syncronize the RTC. Change-Id: I078c0c57215ccb925afa85b9d067f15268801ec9 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/11853 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-01-10lenovo/x220: Enable USB 3 controllerMarian Tietz
Since only X220 with i7 have the USB3 controller this was probably overlooked. Before this patch lspci on Linux would not show the NEC USB 3 controller as well as the PCI bridge it is behind. After, both the bridge and the NEC controller can be found in the output: 05:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) Change-Id: I5e7e3f0c7d023f6206a7bec42a39f8955a3d9331 Signed-off-by: Marian Tietz <mtcoreboot@gmail.com> Reviewed-on: https://review.coreboot.org/12882 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-12-31lenovo/x200: Revise onboard IRQ routingNico Huber
All southbridge interrupt pin and routing registers (D*IP and D*IR) are left at their default values (see ICH9 datasheet) and this file just has to reflect them. Change-Id: I687262556d918311757fda9afda9ebfdd7edf947 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/12813 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-12-10ACPI: Fix IASL Warning about unused method for _OSI checkMartin Roth
According to the ACPI Spec for CondRefOf, the result argument is optional. In all of these locations, it was getting set but not used, creating a warning in new versions of IASL. Since it's an optional argument, just remove it. dsdt.aml 22: if(CondRefOf(\_OSI,Local1)) Warning 3144 - ^ Method Local is set but never used (Local1) Change-Id: I07f49ac5a3708838d1c4a7216dfb11acc415c881 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12692 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-08lenovo/t500: Add clone of Lenovo T400Francis Rowe
The existing code for the Lenovo T400 works without changes on the Lenovo T500. Same HDA verbs are provided by Lenovo BIOS on both laptops. Change-Id: I300408a8a0ed00476aee6061925befc2822fb505 Signed-off-by: Francis Rowe <info@gluglug.org.uk> Reviewed-on: https://review.coreboot.org/10545 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-24lenovo t400: Fix IASL warning and remarkMartin Roth
If any path in a method returns a value, IASL expects that all paths within that method will return a value. Presumably, the ATPX would not need a return value if Arg0 is anything other than 0, so just return a zero. - Serialize ATPX method to make IASL happy. This means that it can only be used by one thread at a time. Fixes these issues: dsdt.aml 2581: Method (ATPX, 2, NotSerialized) { Remark 2120 - ^ Control Method should be made Serialized (due to creation of named objects within) dsdt.aml 2581: Method (ATPX, 2, NotSerialized) { Warning 3115 - ^ Not all control paths return a value (ATPX) Change-Id: I14aeab0cebe4596e06a17cffc36cc01b953d7191 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12518 Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-24ec/lenovo/h8: Fix IASL warningsMartin Roth
If any path in a method returns a value, IASL expects that all paths within that method will return a value. Presumably the MKHP method wouldn't get called unless there were a pending event, but if no event is found, return a zero. Fixes IASL warning: dsdt.aml 1785: Method (MHKP, 0, NotSerialized) Warning 3115 - ^ Not all control paths return a value (MHKP) This was the only IASL warning in most lenovo mainboards. Change-Id: Id93dcc4a74bd4c18b78f1dde821e7ba0f3444da3 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12517 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-23IASL: Enable warnings as errorsMartin Roth
We've actually got more warnings now than when I first tested IASL warnings as errors. Because of this, I'm adding it with the option to have it disabled, in hopes that things won't get any worse as we work on fixing the IASL warnings that are currently in the codebase. - Enable IASL warnings as errors - Disable warnings as errors in mainboards that currently have warnings. - Print a really obnoxious message on those platforms when they build. ***** WARNING: IASL warnings as errors is disabled! ***** ***** Please fix the ASL for this platform. ***** Change-Id: If0da0ac709bd8c0e8e2dbd3a498fe6ecb5500a81 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10663 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-19lenovo/r400: Add clone of Lenovo T400Michał Masłowski
The existing code for the Lenovo T400 works without changes on the Lenovo R400. Same HDA verbs are provided by Lenovo BIOS on both laptops. Change-Id: I1dadddd7250ab80a4c40c2435865d72e3e5d99c9 Signed-off-by: Michał Masłowski <mtjm@mtjm.eu> Signed-off-by: Francis Rowe <info@gluglug.org.uk> Reviewed-on: http://review.coreboot.org/8393 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2015-11-10mainboard/lenovo/t400: Add initial hybrid graphics supportTimothy Pearson
TEST: Booted T400 with Intel/ATI hybrid graphics in integrated mode with native Intel graphics init and verified integrated panel framebuffer functionality in SeaBIOS and Linux. Change-Id: I37e72c5dad0d7ab3915cc3d439ae9a4a9b3787e3 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/9319 Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2015-11-05intel/i945: Consolidate MADT handlingVladimir Serbinenko
Change-Id: Ic3cdfa6086a45aa231aa817d5ef6998823589818 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7108 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-05mainboard: Remove last_boot NVRAM optionTimothy Pearson
The last_boot NVRAM option was deprecated and removed in commit 3bfd7cc6. Remove the last_boot option from all affected mainboards to eliminate user confusion. Change-Id: I7e201b9cf21dfe5dda156785bad078524098626d Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12316 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins)
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-30AMD mainboards: Fix 64bit BiosCallOuts.cStefan Reinauer
Change-Id: I0f3297dff47dfb44da034ac6f305dcf1981b9de1 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/11080 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-23lenovo/t400: Consolidate `acpi/platform.asl`Paul Menzel
The ASL code is already present in `southbridge/intel/common/acpi/platform.asl` and `cpu/intel/common/acpi/cpu.asl`. So include these files instead of duplicating the code. Something similar was don in commit commit 24813c14 (i945: Consolidate acpi/platform.asl). Change-Id: Ide50b34184b80c86b996f86dd589c3cf3bf75587 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/11883 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-23lenovo/x200: Consolidate `acpi/platform.asl`Paul Menzel
The ASL code is already present in `southbridge/intel/common/acpi/platform.asl` and `cpu/intel/common/acpi/cpu.asl`. So include these files instead of duplicating the code. Something similar was don in commit commit 24813c14 (i945: Consolidate acpi/platform.asl). Change-Id: I1e69cf0fd73e70ed6656b9ed6f55aba4c56a6edd Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/11882 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-23southbridge/intel: Move `i82801gx/acpi/platform.asl` to `common/acpi`Paul Menzel
Commit 24813c14 (i945: Consolidate acpi/platform.asl) creates the file in the directory `src/southbridge/intel/i82801gx/acpi`. Devices with the southbridge `intel/i82801ix`, like the laptop Lenovo X200, use the exact same ASL code though. So share this in the directory `src/southbridge/intel/common/acpi`. Change-Id: I33b7993bcdbef7233ed85a683b2858ac72c1d642 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/11881 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-23cpu/intel: Move Power notification ASL code into `common/acpi`Paul Menzel
Commit 24813c14 (i945: Consolidate acpi/platform.asl) creates the file in the directory `src/cpu/intel/model_6dx/acpi`, although the devices can also use different Intel CPU models like, for example, `intel/model_6ex` on the Lenovo T60. Therefore move the file to the directory `src/cpu/intel/common/acpi` so that other devices, like Intel GM45 based devices, can also include it. Change-Id: I90126b66a4d70468923622a8e3aebadeafcbf96f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/11880 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-22gma ACPI: Make brightness levels a per board settingNico Huber
Those are actually board specific. Keep the old value as defaults, though. The defaults are included by all affected boards. Change-Id: Ib865c7b4274f2ea3181a89fc52701b740f9bab7d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/11705 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-10-11lenovo/t60: Enable native intel gfx init.Vladimir Serbinenko
Tested on T60 with intel graphics. Change-Id: Id74d0a1315749052e7313135242e6b64862aa5e1 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5345 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2015-10-11Kill lvds_num_lanesVladimir Serbinenko
Only one value would work with corresponding gma code currently (which one depends on board). Going forward, it's possible to compute which number can be used, so there is no need to keep this info around. Change-Id: Iadc77ef94b02f892860e3ae8d70a0a792758565d Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/11862 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2015-10-11Derive lvds_dual_channel from EDID timings.Vladimir Serbinenko
Based on the info by Felix Held. Change-Id: Iab84dd8a0e3c942da20a6e21db5510e4ad16cadd Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/11857 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2015-10-03sandybridge ivybridge: Treat native init as first class citizenAlexandru Gagniuc
This is a sad story. We have three different code paths for sandybridge and ivybridge: proper native path, google MRC path, and, everyone's favorite: Intel FSP path. For the purpose of this patch, the FSP path lives in its own little world, and doesn't concern us. Since MRC was first, when native files and variables were added, they were suffixed with "_native" to separate them from the existing code. This can cause confusion, as the suffix might make the native files seem parasitical. This has been bothering me for many months. MRC should be the parasitical path, especially since we fully support native init, and it works more reliably, on a wider range of hardware. There have been a few board ports that never made it to coreboot.org because MRC would hang. gigabyte/ga-b75m-d3h is a prime example: it did not work with MRC, so the effort was abandoned at first. Once the native path became available, the effort was restarted and the board is now supported. In honor of the hackers and pioneers who made the native code possible, rename things so that their effort is the first class citizen. Change-Id: Ic86cee5e00bf7f598716d3d15d1ea81ca673932f Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/11788 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
2015-09-24coreboot: move TS_END_ROMSTAGE to one spotAaron Durbin
While the romstage code flow is not consistent across all mainboards/chipsets there is only one way of running ramstage from romstage -- run_ramstage(). Move the timestamp_add_now(TS_END_ROMSTAGE) to be within run_ramstage(). BUG=chrome-os-partner:44827 BRANCH=None TEST=Built and booted glados. TS_END_ROMSTAGE still present in timestamp table. Change-Id: I4b584e274ce2107e83ca6425491fdc71a138e82c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11700 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-27lenovo/g505s: Add System Board ID to fix ACPI warningMartin Roth
Add the System Board Hardware ID to fix the warning: dsdt.aml 88: Device (MB) { Warning 3141 - ^ Missing dependency (Device object requires a _HID or _ADR in same scope) Change-Id: Ie97b1e6792c8d4c8db2500cef6a79881b7ff94c8 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10669 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-24Remove address from GPLv2 headersPatrick Georgi
Follow up for commit b890a12, some contributions brought back a number of FSF addresses, so get rid of them again. Change-Id: Icf83d5e2a3daea385af3572e9eac6b2431652c28 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10640 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-06-24sandy/ivy: Include IRQ routes from platformKyösti Mälkki
The default route does work for all Chromebooks and is replaced with platform-specific one in follow-up. Change-Id: Ia1839ed38dacf44a89dc757394d054e17666f193 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/10442 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-06-22lenovo/x60: Enable VESA framebuffer mode (native graphics)Francis Rowe
At present, no option exists for "Keep VESA framebuffer", which means that text-mode will be used. Add the appropriate Kconfig option. Change-Id: Iaed07eba6d9288c857f7e7a0b0be1107071e49e5 Signed-off-by: Francis Rowe <info@gluglug.org.uk> Reviewed-on: http://review.coreboot.org/10553 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <gaumless@gmail.com>
2015-06-22lenovo/x60: Enable brightness controls (native graphics)Francis Rowe
On i945 legacy brightness control is enabled by a single bit in BLC_PWM_CTL. It's bit 16 or bit 0 (the other one reverses polarity). Set the bit to enable brightness controls. Change-Id: Id855c4e91fe71fb489739e62fbe99ca22841acd2 Signed-off-by: Francis Rowe <info@gluglug.org.uk> Reviewed-on: http://review.coreboot.org/7048 Reviewed-by: Martin Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-06-14mainboard/lenovo/t400: Fix HDA verbs to match hardware layoutMichał Masłowski
The same values are used on my Lenovo R400 as reported by Francis Rowe from his T400 and T500. TEST: Read /proc/asound/card0/codec#0, see that the jack locations correspond to the board layout, e.g. headphone and microphone connectors are on front of the laptop, not right. Read /sys/class/sound/hwC0D0/init_pin_configs, see that it has the same content as with factory firmware. Change-Id: I60e914ca9fab4bb2c99b4ed9e6d81a0580a88b18 Signed-off-by: Michał Masłowski <mtjm@mtjm.eu> Reviewed-on: http://review.coreboot.org/10431 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-06-10mainboard/lenovo/t400: Add initial ATPX ACPI implementationTimothy Pearson
Change-Id: I9b86ebec59ccb63db0e1ba61533d162507a22379 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/9320 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2015-06-10lenovo/t400: Fix buildKyösti Mälkki
Change-Id: I8e8b6e7c123e641749c42a7c706176e285902bb5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/10502 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2015-06-10mainboards/lenovo/t400: Remove X200-specific codeTimothy Pearson
Change-Id: Ic3503938b996bbf31f1417923f019a7bc722b9fd Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/10429 Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Tested-by: build bot (Jenkins)
2015-06-10mainboards/lenovo: Copy X200 board to T400 for future expansionTimothy Pearson
Change-Id: If2d48b84fe7bd7b144e96171e54067891e3c4e2e Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/9316 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-10mainboard/lenovo/x200: Add power_on_after_fail NVRAM optionTimothy Pearson
Change-Id: I8e78cbae132566b6ca27e0a68af2656364c82b8f Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/9332 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-08Remove empty lines at end of fileElyes HAOUAS
Used command line to remove empty lines at end of file: find . -type f -exec sed -i -e :a -e '/^\n*$/{$d;N;};/\n$/ba' {} \; Change-Id: I816ac9666b6dbb7c7e47843672f0d5cc499766a3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: http://review.coreboot.org/10446 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-05device_ops: add device_t argument to acpi_fill_ssdt_generatorAlexander Couzens
`device_t device` is missing as argument. Every device_op function should have a `device_t device` argument. Change-Id: I7fca8c3fa15c1be672e50e4422d7ac8e4aaa1e36 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: http://review.coreboot.org/9598 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-05mainboard/lenovo/{t430s,t420s,t520,t530,x220}: Add TPM 1.2 mainboard supportPhilipp Deppenwiese
Every Lenovo Thinkpad includes a Trusted Platform Module, so we can enable it for the sandy-/ivybridge platforms. Change-Id: Icda443ba88c2a49a0033014ce7710dd607fa15dc Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: http://review.coreboot.org/10411 Tested-by: build bot (Jenkins) Reviewed-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-05-29bd82x6x: Move calling of finalize() on resume to southbridge codeVladimir Serbinenko
Change-Id: I6416cd5780fbda0b3c2e236ce98a9f9a508e70c6 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10293 Tested-by: build bot (Jenkins) Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
2015-05-29x230: Clean up smihandler.cVladimir Serbinenko
Remove dead code and dead includes. Change-Id: I5564ebfbbef6f65c275c2f94f75724f4e36472db Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10349 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2015-05-29lenovo: Move pc_keyboard_init to h8 init.Vladimir Serbinenko
PS/2 emulation is part of H8, so should be inited in relevant files. Change-Id: Ie873ea7f6f88f68f622351799462d0b000d17585 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10348 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2015-05-28x230: Fix headset microphone support.Vladimir Serbinenko
Previously only internal mic really worked but since it's of good quality it's not really noticeable. Change-Id: Ie14c377b0370302d97e1f89eae5787e05e73b7d2 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10286 Tested-by: build bot (Jenkins) Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
2015-05-28intel: Remove pstate_coord_type.Vladimir Serbinenko
Not used anywhere. Change-Id: I9bab092d285aaebdf9283ba08e23197f9785b3a6 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10329 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
2015-05-28igd.asl rewriteVladimir Serbinenko
Old igd.asl had inconsistent addresses (between _DOD and actual device) and ghost devices. Any of those is enough to make brightness on windows fail and make igd.asl out-of-ACPI-spec. Also old code favoured ridiculous copying of the same thing 6 times per chipset. Leave only hooking up and chipset-specific part in chipset directory. Move NVS handling and ACPI-spec parts to a common file. Change-Id: I556769e5e28b83e7465e3db689e26c8c0ab44757 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7472 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2015-05-27x201: Add TPM declaration.Vladimir Serbinenko
This allows to deactivate TPM on X201. Change-Id: Ic085db6cc2c57668e7a4fdbc7440735c806cc256 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10278 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
2015-05-27x230: Add TPM declaration.Vladimir Serbinenko
This allows to deactivate TPM on X230. Change-Id: I73d4272da62335ec3766ce4814d5b46538b190fe Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10273 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
2015-05-26gm45: Link cstates.c rather than including it.Vladimir Serbinenko
The comment about necessity of include isn't true anymore as get_cst_entries is not weak anymore so if it's not found, the linking would fail. Change-Id: I4bf88208d63ac3e625f464c3907e2e1ea575dd9f Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7375 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2015-05-26bd82x6x: Merge common platform ASL code.Vladimir Serbinenko
This code in reality just describes the southbridge features, don't put a copy in every mainboard. Change-Id: I8cf3019a36b1ae6a17d502e7508f36ea9fa62830 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10231 Reviewed-by: Nicolas Reinecke <nr@das-labor.org> Tested-by: build bot (Jenkins)
2015-05-24AGESA binaryPI boards: Drop annoying commentaryKyösti Mälkki
Same comments were already removed for the latest board, the amd/lamar. Change-Id: Ie244f838409c567c11f7444c9cf17de72e49dbb0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/10283 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2015-05-23AGESA fam15x fam16x: Remove HAVE_ACPI_RESUMEKyösti Mälkki
Implementation corrupts low-memory on S3 resume path, rendering OS unstable. AMD was never able to pinpoint a revision that did not have the issue. Change-Id: I9656ac1bfe1412775a6152b9f995c4d4ebf57159 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/10285 Reviewed-by: Rudolf Marek <r.marek@assembler.cz> Tested-by: build bot (Jenkins)
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-05-21lenovo: Remerge smbios_mainboard_bios_version.Vladimir Serbinenko
Change-Id: I8df5b7f6707957b925f7bb4dc06a717252c70868 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10275 Reviewed-by: Nicolas Reinecke <nr@das-labor.org> Tested-by: build bot (Jenkins)
2015-05-21Remove unused functionsPatrick Georgi
acpi_fill_slit and acpi_fill_srat were removed in commit 5e597572e. Take care of the boards that were added in the mean time. Change-Id: I907e51de5d4ce9acfcce82e6bb30eefff312d35d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10266 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-05-20acpi: make fill_slit and fill_srat into arguments.Vladimir Serbinenko
SLIT and SRAT are created this way only on amdk8 and amdfam10. This saves the need of having a lot of dummies. Change-Id: I76d042702209cd6d11ee78ac22cf9fe9d30d0ca5 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7052 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-05-20bd82x6x: Merge common apmc finalize procedure.Vladimir Serbinenko
Change-Id: I9c938b8a69479fae6b0eb99d1135f1caaf26d0e2 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10227 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-05-19Move smi trap sample to documentation, don't keep it in every mobo.Vladimir Serbinenko
Sample code belongs to documentation, not copied 100x over prodcution code. Change-Id: I6bb318d76057d02bd6ac5641d12d56ab6d60b745 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10229 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-05-19Remove useless extern gnvs declaration in smi handlers.Vladimir Serbinenko
Change-Id: I3047badea8d4f61155f4e4f7d3d078426948162a Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10228 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-05-17x230/smihandler: Kill non-functional brightness code.Vladimir Serbinenko
Just a copypaste, never worked. Change-Id: I84b46a5a0ada2e472894c63a17170e0979ad9160 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10218 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2015-05-17lenovo/x200: Enable wacom digitizer support for x200tAlex David
This patch is based on commit f2b3cd63 (lenovo/x60: Support digitizer on X60t and X201t) Tested on Thinkpad X200 Tablet (7450): all pen functionallity works (i.e. movements, presure sensitivity and buttons) Change-Id: I9bd18642a6ea4211dc3be065456a507fc0b72561 Signed-off-by: Alex David <opdecirkel@gmail.com> Reviewed-on: http://review.coreboot.org/10208 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-05-15ibexpeak: Merge common NVS initVladimir Serbinenko
Change-Id: Ia5e26110928fa011305c13362f20fbe78ca9cf30 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7134 Tested-by: build bot (Jenkins) Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
2015-05-14lenovo: Disable radio when suspending or turning off.Vladimir Serbinenko
Without this some radios may remain operational. They may consume power but the immediate demonstrable effect is wireless LED still being on. Coreboot will reenable radios on resume or poweron. Change-Id: I9fcb08880964b1594f779a246840bc3013a44afe Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10190 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2015-05-14x230: Fix VGA PCIIDs.Vladimir Serbinenko
x230 is ivy, not sandy. Fix copy-paste error. Change-Id: Ic462bab39ddac0e1e6fef1e043970957e45fb6ed Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10189 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2015-05-10AGESA: Drop unused AGESA_MEM_TABLEKyösti Mälkki
These tables are not referenced anywhere, thus all comments about adjustments are void. Also drop stub AgesaReadSpd that is all commented out. Change-Id: I12233ea0dc4baaf36a75f359c52cc59c9b6dad79 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/10143 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
2015-05-02mainboard/lenovo/x200: Use defines from southbridge for GPIO configTimothy Pearson
Change-Id: I9f65922d0785e06a173221b3262e73b575087dfd Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/9321 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-04-28intel SMI handlers: Refactor GPI SMI/SCI routingKyösti Mälkki
Move the GPI interrupt routing selection between SMI/SCI from mainboards to southbridge. There is speculation if this is all just legacy APM stuff that could be removed with a followup. Change-Id: Iab14cf347584513793f417febc47f0559e17f5a5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/7967 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2015-04-28x60,t60,x201,macbook21 : Declare GPIs for ECKyösti Mälkki
For lenovo/x201, this also changes GPI_ROUT (0xb8-0xbb) programming to use GPI1 between SCI/SMI modes, while previous programming was for GPI12. Change-Id: I3ac0feaa1d10c8f0e53a5fa5af72366503bb5d2d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/8656 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-23src/mainboard/*/*/board_info.txt: Added Release year for boardsMathias Friman
To simplify browsing the "Supported hardware" list, I added Release year for the hardware from asus, asrock, gigabyte, msi, via, tyan, intel, lenovo, apple, jetway and hp. Still several models and manufacturers to add information to. This is more of a proof-of-concept. The "Release year" will be shown in the wiki page. Change-Id: I6bc14ed06ac7c6b3c9f054b49f08cb9b3dc47947 Signed-off-by: Mathias Friman <mathias@workplays.se> Reviewed-on: http://review.coreboot.org/9963 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2015-04-20mainboard/lenovo/t430s,t530,x230:enable usb3, set xhci overcurrent mappingNicolas Reinecke
Tested on T530, T430s. Verified with lspci dump. Change-Id: I45acadb0c55534a67f7ad3e7bd84f4482a4344d7 Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/9451 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2015-04-18kconfig: automatically include mainboardsStefan Reinauer
This change switches all mainboard vendors and mainboards to be autoincluded by Kconfig, rather than having to be mentioned explicitly. This means, vendor and mainboard directories are becoming more "drop in", e.g. be placed in the coreboot directory hierarchy without having to modify any higher level coreboot files. The long term plan is to enable out of tree mainboards / components to be built with a given coreboot version (given that the API did not change) Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Change-Id: Ib68ce1478a2e12562aeac6297128a21eb174d58a Reviewed-on: http://review.coreboot.org/9295 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-04-05mainboard/lenovo/x201: correct sata_port_mapAlexander Couzens
x201 has 2 sata ports. 1 port for hard drive and 1 port for the dock. Tested on x201 with hdd in port 1 + cdrom in port 2. Change-Id: I1ee8c547392257d4f2e00a5d48e21447a84f79c0 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: http://review.coreboot.org/8657 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2015-04-05intel/nehalem: rename copypasted smi finalizer functionAlexander Couzens
The nehalem smi finalize handler was just copied from sandybridge, without even changing the function name. TEST=Built and tested on x201t with additional patch to use finalizers Change-Id: Ifb44eeaaa6e03556deeb5d12ed1147e02d6d6eb9 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: http://review.coreboot.org/8292 Reviewed-by: Nicolas Reinecke <nr@das-labor.org> Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2015-03-10lenovo: fix smi gpe + wakeup pin for t420s t520 t530 x220 x230Nicolas Reinecke
Set correct gpio routing and enable bits for EC SMI gpio and EC WAKE gpio. Verified with schematics. Change-Id: Ie3b98c4456a870c881e7663b19eb8ca8e5564c5c Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/8358 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-03-07AGESA: Use same HeapManager for all BiosCallOutsKyösti Mälkki
We do not allow platforms to mess around with memory layout. Change-Id: I316ff522c8833fa3b7ad20f2c5a9cae21f4174d8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8604 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-16acpi: Generate valid ACPI processor objectsTimothy Pearson
The existing code generated invalid ACPI processor objects if the core number was greater than 9. The first invalid object instance was autocorrected by Linux, but subsequent instances conflicted with each other, leading to a failure to boot if more than 10 CPU cores were installed. The modified code will function with up to 99 cores. Change-Id: I62dc0eb61ae2e2b7f7dcf30e9c7de09cd901a81c Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8422 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-02-16mainboard/cmos: Kill off unused boot_* parametersTimothy Pearson
Change-Id: I19d6b56e3ac5e6e7946648b97c86a223b748e3bd Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8460 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-16mainboard/cmos: Move ECC variables out of fallback mechanism byteTimothy Pearson
Change-Id: Icebc12d8f83494150a7bdd3adcc168d7b48b2e68 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8458 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-16mainboard/cmos: Delete obsolete commented parametersTimothy Pearson
Change-Id: Iccad79c142a7fcf89dd0fbebe8c07ad9ef019e91 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8459 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2015-02-15x86: Change MMIO addr in readN(addr)/writeN(addr, val) to pointerKevin Paul Herbert
On x86, change the type of the address parameter in read8()/read16/read32()/write8()/write16()/write32() to be a pointer, instead of unsigned long. Change-Id: Ic26dd8a72d82828b69be3c04944710681b7bd330 Signed-off-by: Kevin Paul Herbert <kph@meraki.net> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/7784 Tested-by: build bot (Jenkins)
2015-02-10lenovo/x200: Increase default CBFS_SIZE to 2 MiBMichał Masłowski
The original firmware has a 2 MiB BIOS region in both 4 MiB and 8 MiB flash variants. Let's allow using the whole region instead of the gm45 default of 1 MiB. Change-Id: I2d8a04bcb992bf2e8e15890a5c6719810b1cf405 Signed-off-by: Michał Masłowski <mtjm@mtjm.eu> Reviewed-on: http://review.coreboot.org/8392 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-08lenovo/t430s: Add new port.Nicolas Reinecke
The port is based on the x230 / t530. Tested - is in active use. Change-Id: Ic5ccfe70343e8aef3465690edce9cdebf153a44d Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/8359 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-01lenovo/x230: Set xhci_switchable_ports and superspeed_capable_ports.Vladimir Serbinenko
Fixes USB3 ports degraded to USB2 speeds. Change-Id: Ie71c9fb6e52a3e72bb1e61351ad1cc0492d93cbc Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/8313 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2015-01-31mainboard/lenovo/t420s/Kconfig: select NO_UART_ON_SUPERIONicolas Reinecke
same as 37130ebdabe44989787aadeafbe79524970dec75 Change-Id: I73feed3a077dfcc61634147775df1e05fdb97e8b Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/8278 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-31lenovo/t530/romstage.c: add usb port description and missing oc configNicolas Reinecke
OC2 at port 4 was missing. Verified with RCBA dump. Change-Id: Ide5701d53aeee28619204c7ac408662626aa11e4 Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/8304 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-31lenovo/t5x0: Make version look like something thinkpad_acpi would acceptNicolas Reinecke
thinkpad_acpi checks that BIOS version matches some pattern. Report version in this form. same as http://review.coreboot.org/4650 / 63acd22dc5366c72a7165138f5030df9523824dc Change-Id: I82d7a2b9f2ec56557b3a9c26d1af57ed39e31850 Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/8302 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>