summaryrefslogtreecommitdiff
path: root/src/mainboard/lenovo
AgeCommit message (Collapse)Author
2016-09-02lenovo/x60: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/lenovo/x60. The patch has been tested both with the arch/io.h definition of device_t enabled and disabled in order to ensure compatibility while the transaction takes place. Change-Id: Icaceeae2fc7276efa82d37582ecac93aaf37c41c Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/16372 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-02lenovo/x200,t400: use gpio.h instead of gpio_setupArthur Heymans
Uses gpio.h instead of default_southbridge_gpio_setup to configure southbridge GPIO's. This is more consistent with how GPIO's are configured on newer targets. Change-Id: I6ccd0564b929e958864739b7cde04f5592c58479 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/16379 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-31i945: Enable changing VRAM sizeArthur Heymans
On i945 the vram size is the default 8mb. It is also possible to set it 1mb or 0mb hardcoding the GGC register in early_init.c The intel documentation on i945, "Mobile Intel® 945 Express Chipset Family datasheet june 2008" only documents those three options. They are set using 3 bits. The documententation also makes mention of 4mb, 16mb, 32mb, 48mb, 64mb but not how to set it. The other non documented (straight forward) bit combinations allow to change the VRAM size to those other states. What this patch does is: - add those undocumented registers with their respective vram size to the i945 NB code; - make this a cmos option on targets that have this northbridge. TEST: build, flash to target, set cmos as desired and boot linux. On Debian it can be found using "dmesg | grep stolen". NOTE: dmesg message about reserved vram are quite different depending on linux version Change-Id: Ia71367ae3efb51bd64affd728407b8386e74594f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/14819 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-27lenovo/x200,t400: enable C4 cpu low power stateArthur Heymans
This enables the C4 low power state on the lenovo x200 and t400. It's inspired by the thread on the mailinglist: "[coreboot] Lenovo X200 running Coreboot drains 3-4W more power than with Vendor BIOS". What this does, is to enable a C3 state using MWAIT(C3) request and set the southbridge config c4onc3_enable to automatically upgrade C3 to the lower power C4 state. The latency (0x37) is the same value used by the vendor bios. With C4 enabled the idle power consumption is about ~2-3W lower. TEST= build and install on target. Use powertop top to measure power usage. To manually disable c-state to compare them, do (tested on linux 4.4): echo 1 > /sys/devices/system/cpu/cpu*/cpuidle/stateX/disable Change-Id: I1a1663a7662ebc7157a965667680688ad6a33545 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/15251 Tested-by: build bot (Jenkins) Reviewed-by: Swift Geek Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-08-17mainboard: Clean up boot_option/reboot_bits in cmos.layoutNico Huber
Since commit 3bfd7cc (drivers/pc80: Rework normal / fallback selector code) the reboot counter stored in `reboot_bits` isn't reset on a reboot with `boot_option = 1` any more. Hence, with SKIP_MAX_REBOOT_CNT_CLEAR enabled, later stages (e.g. payload, OS) have to clear the counter too, when they want to switch to normal boot. So change the bits to (h)ex instead of (r)eserved. To clarify their meaning, rename `reboot_bits` to `reboot_counter`. Also remove all occurences of the obsolete `last_boot` bit that have sneaked in again since 24391321 (mainboard: Remove last_boot NVRAM option). Change-Id: Ib3fc38115ce951b75374e0d1347798b23db7243c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/16157 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-by: York Yang <york.yang@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-14src/mainboard: Capitalize ROM, RAM, CPU and APICElyes HAOUAS
Change-Id: Ia1f24d328a065a54975adde067df36c5751bff2d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/15987 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-11lenovo/x60: add info message if dock is presentAlexander Couzens
Change-Id: I5a6d41f815f65719780499fa18c131311a9dc8f7 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/16136 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-08-11lenovo/x60: add GPIOs initialisation before dock checkAntonello Dettori
Add GPIOs initialisation before dock check. Needed in order to properly detect the presence or absence of the lenovo dock. Previously the check always reported the dock as connected and currently it always reports it as disconnected since the GPIOs are not properly initialised during the check. Tested and confirmed working. Change-Id: I7fbf8c2262a1eb5dee9cbe5e23bf44f7f8181009 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/16139 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-08-03lenovo/x60: Fetch 16 bits when trying to parse bit 13Patrick Georgi
I'm not sure if that's the right fix here, but assuming the bit mask is right, the inb is wrong. Change-Id: I7e33019af088780a09be12513200bec63734bf97 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1229556 Reviewed-on: https://review.coreboot.org/16026 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2016-08-01Add newlines at the end of all coreboot filesMartin Roth
Change-Id: I7930d5cded290f2605d0c92a9c465a3f0c1291a2 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15974 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-07-31mainboard: Format irq_tables.cPaul Menzel
Run the command below to format the files `irq_tables.c` of (mostly AMD) mainboards correctly with GNU indent 2.2.10. ``` $ git grep -l 'if (sum != pirq->checksum) {' | xargs indent -l ``` Fix up the following two checkpatch.pl errors manually. ``` ERROR: that open brace { should be on the previous line #1219: FILE: src/mainboard/gigabyte/ga_2761gxdk/irq_tables.c:129: + uint8_t reg[8] = + { 0x41, 0x42, 0x43, 0x44, 0x60, 0x61, 0x62, 0x63 }; ERROR: that open brace { should be on the previous line #1221: FILE: src/mainboard/gigabyte/ga_2761gxdk/irq_tables.c:131: + uint8_t irq[8] = + { 0x0A, 0X0B, 0X0, 0X0a, 0X0B, 0X05, 0X0, 0X07 }; ``` This is needed, so that follow-up commits, fixing checkpatch.pl errors and warnings, won’t run into conflicts with the git commit hooks, when for example, spaces instead of tabs are used for indentation. Change-Id: If254723f3013377fb3b9b08dd5eca6b76730ec4a Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/15932 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-07-31Remove extra newlines from the end of all coreboot files.Martin Roth
This removes the newlines from all files found by the new int-015-final-newlines script. Change-Id: I65b6d5b403fe3fa30b7ac11958cc0f9880704ed7 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15975 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-07lenovo/t530: Don't enforce native gfx initAlexander Couzens
Change-Id: I6d51f46240c62fcd6089411e8681e0b6e7d5bfe4 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/15222 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-07lenovo/t530: add VGA device ID 8086,0106Alexander Couzens
Change-Id: I3cffe9d832edbbea79cabca639d9d920b7ffcf9a Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/8178 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-06-26intel/nehalem: Use common ACPI S3 recoveryKyösti Mälkki
Change-Id: Ic82a732ba28ba24e42a635539cca3d76128b40b5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15247 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-06-26intel/gm45: Use common ACPI S3 recoveryKyösti Mälkki
Change-Id: I3148dbbcb06676f48b6bc357124403b70b9bcb6a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15246 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-06-22intel/model_2065x: Prepare for dynamic CONFIG_RAMTOPKyösti Mälkki
Change-Id: I616143b55d7c5726dc2475434e3fcb08b8d69bda Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15230 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-21intel/model_6ex: Prepare for dynamic CONFIG_RAMTOPKyösti Mälkki
Change-Id: I9bfaa53f8d09962d36df1e86a0edcf100bb08403 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15229 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-20nb/intel/sandybridge/raminit: Allow 933Mhz on Lenovo devicesPatrick Rudolph
Set max_mem_clock_mhz in devicetree to 933Mhz. Allows to run the memory at up to DDR3-1866. The same frequency was allowed within the first vendor bios, but Lenovo than decided to limit it to DDR3-1333. Tested on Lenovo T520 and DDR3-1600 DIMM (RMT3170eb86e9w16). The RAM is now running at DDR3-1600 instead of DDR3-1333. This gives about 4% performance increase in glmark2 using the Intel GPU. Change-Id: If15be497402d84a2778f0434b6381a64eda832d6 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/15158 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-06-17Move definitions of HIGH_MEMORY_SAVEKyösti Mälkki
This is more of ACPI S3 resume and x86 definition than CBMEM. Change-Id: Iffbfb2e30ab5ea0b736e5626f51c86c7452f3129 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15190 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-06-12nb/intel/raminit (native): Read PCI mmio size from devicetreePatrick Rudolph
Instead of hardcoding the PCI mmio size read it from devicetree. Set a default value of 2048 MiB and 1024MiB for laptops without discrete graphics. Tested on Sandybridge Lenovo T520. Change-Id: I791ebd6897c5ba4e2e18bd307d320568b1378a13 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/15140 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-08mainboard/lenovo/x220: Clean up codeJan Tatje
thermal.h still has references to X230 in include guard since it seems to have been copied from that port. Code formatting changes in romstage.c. Change-Id: Id8bd931bed127036e8bb4ab604d9d6145f767e56 signed-off-by: Jan Tatje <jan@jnt.io> Reviewed-on: https://review.coreboot.org/15071 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-06-08lenovo/x60: add hda_verb.cArthur Heymans
This creates a config for the x60 audio based on values taken from vendor bios. The pin config is stored in (for linux 4.5 at least): /sys/class/sound/card0/hw*/init_pin_configs In the left column there is the pin number. In the right column there is the default configuration of that pin. (This has to be done while running the proprietary bios) More information on the sound card can be found in: /proc/asound/card0/codec#* This also hold the information of /sys/class/sound/ What is improved: - internal microphone is chosen by default - when jack is inserted it is chosen instead of internal speaker Before this had to be done manually in alsa or pulseaudio. TEST= check if internal microphone is used by default in pavucontrol if you are using pulseaudio. Plug in a jack with headphones and check if there is sound output through these and not the build-in speaker. Change-Id: Id3b700fd84905a72cc1f69e7d8bfa6145f231756 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/15063 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-06-04AGESA boards: Split dispatcher to romstage and ramstageKyösti Mälkki
The way dispatcher table is set up prevents linker from optimizing unused code away, we currently have raminit in ramstage. Optimize this manually by configuring AGESA_ENTRY booleans for romstage and ramstage separately. This will remove references in FuncParamsInfo and DispatchTable -arrays. All boards now include multi-core dispatcher, it has minimal footprint: AGESA_ENTRY_LATE_RUN_AP_TASK ACPI S3 support depends on HAVE_ACPI_RESUME being enabled: AGESA_ENTRY_INIT_RESUME AGESA_ENTRY_INIT_LATE_RESTORE AGESA_ENTRY_INIT_S3SAVE Disabled for all boards as it was not used: AGESA_ENTRY_INIT_GENERAL_SERVICES Change-Id: I7ec36a5819a8e526cbeb87b04dce4227a1689285 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14417 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-06-04gm45: enable setting all vram sizes from cmosArthur Heymans
Setting the size of the preallocated memory for the igd is done using a cmos parameter, gfx_uma_size. This was limited to a subset of all available sizes, that were already implemented elsewhere in the northbridge code. What this does is change the cmos parameter to 4 bits instead of 3 bits to accomodate all vram sizes. It also adds a sane default of 32mb that already was in place. The northbridge code that reads this cmos parameter is also changed for this new cmos settings. 352M is disabled since it causes issues on systems with 4GB or more ram. TEST: Build, flash target. Clear cmos by corrupting the checksum (nvramtool -c something). Set a desired value in gfx_uma_size using nvramtool. "dmesg | grep stolen" to see what is actually allocated. Change-Id: Ia6479d03f1abe6d0c94bd7264365505e8f8eaeec Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/14900 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2016-06-03AMD boards: Drop comment on include fileKyösti Mälkki
The included file does not declare pm_ioread(), and the modified file does not call it either. Change-Id: I9723caf1062db23b4a3648e07c2dc4c02f862619 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14968 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-06-03AGESA boards: Drop unused includeKyösti Mälkki
These files do not use definitions from OptionsIds.h. Also those definitions are required and already included for Ids.h. Change-Id: I149fcfe2ad72fe3d7390ee2043a86432aeae3f08 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14980 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-06-02lenovo/t420: correct the eSATA portIru Cai
The eSATA port of Lenovo T420 is port 3. I've checked it on an iGPU model and a dGPU model. Change-Id: I64bcc887140c1634dd1475d29e97780a5128d0be Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/14632 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
2016-06-01mb/lenovo/T4xx: enable PEG devicePatrick Rudolph
Enable the PEG device in devicetree to expose the device if any. This is already default behaviour for T5xx series. Change-Id: I16bd253ca96c4cdaad8a829f6490cec9e2599b5f Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/14448 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-06-01drivers/lenovo: Add hybrid graphics driverPatrick Rudolph
Add a universal hybrid graphics driver compatible with all supported lenovo devices. Hybrid graphics allows to connect the display panel to either of one GPUs. As there are only two GPUs one GPIO needs to be toggled. In case the discrete GPU is activated the panel is routed to it. On deactivation the panel is routed to the integrated GPU. On lenovo laptops the dGPU is always connected to PEG10 and it is save to disable the PEG slot on dGPU deactivation. Use common gpio.c for southbridge I82801IX. Tested on Lenovo T520 using Nvidia NVS 5200m. Removed Lenovo T430s from the list of supported devices, as the T430s only supports "muxless Optimus". Depends on change id: Iccc6d254bafb927b6470704cec7c9dd7528e2c68 Ibb54c03fd83a529d1ceccfb2c33190e7d42224d8 I8bd981c4696c174152cf41caefa6c083650d283a Iaf0c2f941f2625a5547f9cba79da1b173da6f295 I994114734fa931926c34ed04305cddfbeb429b62 Change-Id: I9b80b31a7749bdf893ed3b772a6505c9f29a56d1 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/12896 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-06-01Revert "mainboard/lenovo/t400: Add initial hybrid graphics support"Patrick Rudolph
This reverts commit 59597ead1f26d4c18997bda81b2ec33e52973b80. Will be replaced by lenovo common hybrid driver. Change-Id: I994114734fa931926c34ed04305cddfbeb429b62 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/12895 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-05-10AGESA boards: Relocate platform memory configKyösti Mälkki
File buildOpts.c is a can of worms, pull platform memory configuration in to OemCustomize.c. This array should be assigned at runtime instead of linking a modified defaults table. Change-Id: I73d9d3fbc165e6c10472e105576d7c40820eaa6a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14528 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-10AGESA boards: Rename files containing OEM configurationKyösti Mälkki
There are other things besides PCIe port configuration that require board specific hooks. Change-Id: I0923651487b9ed5f6f7569ce08e02d993fa5f976 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14527 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-04-20mb/lenovo/x220: disable MEAlexander Couzens
The ME hangs, the lspci shows no memory and the linux kernel tries to request irq 0 twice. After suspend-resume the linux kernel warns about double used irq. genirq: Flags mismatch irq 0. 00000080 (mei_me) vs. 00015a00 (timer) mei_me 0000:00:16.0: request_threaded_irq failed: irq = 0. dpm_run_callback(): pci_pm_resume+0x0/0xa0 returns -16 PM: Device 0000:00:16.0 failed to resume async: error -16 Change-Id: I56ef66388e58dddcfb858294ba274621c55fbef6 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/14309 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2016-04-19kbuild: Allow drivers to fit src/drivers/[X]/[Y]/ schemeStefan Reinauer
Reorder drivers to fit src/drivers/[X]/[Y]/ scheme to make them pluggable. Also, fix up the following driver subdirectories by switching to the src/drivers/[X]/[Y]/ scheme as these are hard requirements for the main change: * drivers/intel * drivers/pc80 * drivers/dec Change-Id: I455d3089a317181d5b99bf658df759ec728a5f6b Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14047 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-13lenovo/t420: Add new portNicolas Reinecke
This is based on t420s. Tested on a T420 without discrete GPU. There is no support for nvidia gpu and optimus. Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Tested-by: Iru Cai <mytbk920423@gmail.com> Change-Id: Ie9405966e56180ac1c43a3c5b83181ee500177c8 Reviewed-on: https://review.coreboot.org/11765 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-06src/mainboard: Disable power_on_after_fail CMOS option for laptopsPhilipp Deppenwiese
power_on_after_fail=Enable in cmos.default leads to wake on AC behaviour on mobile systems. Therefore set cmos.default entry to "Disable" in order to improve user experience. Change-Id: I977a4e6bc028c8c4c7fc1c2f5fdd74a59e951c60 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/13884 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2016-03-21nb/intel/sandybridge: increase MMCONF_BASE_ADDRESSPatrick Rudolph
Set MMCONF_BASE_ADDRESS to 0xf8000000. It was already done for some boards, but not all. The sandybridge chipset code assumes 64 pci buses behind MMCONF. Therefore, only 64MiB of physical address space is required. Increasing the address allows to use additional 128MiB of MMIO space and to use the Intel IGD and a PEG at the same time. Previously it wasn't possible to use both at the same time, as two 256MiB areas won't fit into MMIO space. Test system: * Gigabyte GA-B75M-D3H * Intel Pentium CPU G2130 * Onboard GPU Intel IvyBridge Desktop * PEG GPU AMD RV770 Change-Id: I3bf72439056c8089ada6899bb0605e5cd9d89cd6 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/14096 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-03-15lenovo: add config ONBOARD_VGA_IS_PRIMARYPatrick Rudolph
Fix for the T4xx and T5xx series. It does not apply to X2xx/X6x series as those have only one GPU, which is always connected to the display. The T6x series needs special care not handled with this patch. Without ONBOARD_VGA_IS_PRIMARY the onboard GPU would be deactivated in case a dedicated GPU is found and active, leaving the system without a working display. Change-Id: I94d1700e9afb75de83a4f2ed1ff53ba3b0559ae1 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/14031 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
2016-03-05sandybridge/gma_lvds: support both Sandy&Ivy on one boardIru Cai
Sandy and Ivy Bridge processors use the same socket, and a mainboard with the socket can support both types of CPUs. However, they use different native graphics init code for LVDS and cause a crash if running the wrong code. This change detects the CPU type and then selects the right code to run. It will add some more code in ramstage. It also merges the {SANDY,IVY}BRIDGE_LVDS symbol to one SANDYBRIDGE_IVYBRIDGE_LVDS. Tested on a Lenovo T520 with i7-2630qm and i7-3720qm Signed-off-by: Iru Cai <mytbk920423@gmail.com> Change-Id: I4624759f9c92d56d547db1ab4b9a1d611a182a91 Reviewed-on: https://review.coreboot.org/12087 Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com> Tested-by: build bot (Jenkins)
2016-02-18southbridge/intel/bd82x6x: Use common gpio.cPatrick Rudolph
Use shared gpio code from common folder. Bd82x6x's gpio.c and gpio.h is used by other southbridges as well and will be removed once it is unused. Change-Id: I8bd981c4696c174152cf41caefa6c083650d283a Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13614 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-12Make MRC vs native a config rather than making a separate chipset for it.Vladimir Serbinenko
Tested by making lenovo x230 configurable despite pretty MRC bugs. Change-Id: Ia2a123f24334f5cd5f42473b7ce7f3d77c0e65b7 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13658 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-12Merge sandy/ivybridge romstage flow for MRC and non-MRC.Vladimir Serbinenko
Change-Id: I11e09804ed1d8a7ae8b8d4502bd18f6be933f9fa Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13656 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09sandybridge: Set all native gfx-related options in northbridge code.Vladimir Serbinenko
In the same time remove few native gfx options which were improperly set and only added dead code to the binary. Change-Id: I4ed3fec03a1655ae0a779c3aa3845de273cb12e1 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13649 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-02-09ivy: Add a possiblity for mainboard early init.Vladimir Serbinenko
This is needed for stout EC init. Change-Id: I5c73499c17763229840152a473a2d820802ee2f6 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13535 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09Workaround for unused variable warning.Vladimir Serbinenko
Change-Id: I0a0c925509027f98f724d0a4347146f21ac06c02 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13624 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09mainboard/lenovo: Add support for the Lenovo ThinkPad X220iChristopher Spinrath
The ThinkPad X220i is essentially identical to the ThinkPad X220 but it has a Sandybridge i3 (instead of a Sandybridge i5/i7) CPU and the VGA_BIOS_ID differs. Thus, support is added by using the X220 mainboard directory and setting the VGA_BIOS_ID in Kconfig. Change-Id: I33345a099c617e8c87a1de64b7254b7e7716ca90 Signed-off-by: Christopher Spinrath <christopher.spinrath@rwth-aachen.de> Reviewed-on: https://review.coreboot.org/13594 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2016-01-19lenovo/t400: Revise onboard IRQ routingNico Huber
All southbridge interrupt pin and routing registers (D*IP and D*IR) are left at their default values (see ICH9 datasheet) and this file just has to reflect them. Change-Id: I1e9732e178bb8422b284d80d9f3d34b72f2e2415 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/13040 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-14mb/lenovo/x200: Add panel power sequence valuesNico Huber
Values are taken from the vendor BIOS of my X200s. Notable effect: Stops display from flashing during native graphics init / Linux mode setting. Change-Id: Ie5d9efc010a78dd46317b6bbdb7bfacc2c9d2cbf Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/12886 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-14mainboard/lenovo: reserve century byteAlexander Couzens
The century byte is used by most RTC (default 0x32@nvram). Even the century byte can disabled via ACPI it's more safe to reserve it's space. Because some RTC will act with that byte anyhow. Some OS overwrite it when syncronize the RTC. Change-Id: I078c0c57215ccb925afa85b9d067f15268801ec9 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/11853 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-01-10lenovo/x220: Enable USB 3 controllerMarian Tietz
Since only X220 with i7 have the USB3 controller this was probably overlooked. Before this patch lspci on Linux would not show the NEC USB 3 controller as well as the PCI bridge it is behind. After, both the bridge and the NEC controller can be found in the output: 05:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) Change-Id: I5e7e3f0c7d023f6206a7bec42a39f8955a3d9331 Signed-off-by: Marian Tietz <mtcoreboot@gmail.com> Reviewed-on: https://review.coreboot.org/12882 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-12-31lenovo/x200: Revise onboard IRQ routingNico Huber
All southbridge interrupt pin and routing registers (D*IP and D*IR) are left at their default values (see ICH9 datasheet) and this file just has to reflect them. Change-Id: I687262556d918311757fda9afda9ebfdd7edf947 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/12813 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-12-10ACPI: Fix IASL Warning about unused method for _OSI checkMartin Roth
According to the ACPI Spec for CondRefOf, the result argument is optional. In all of these locations, it was getting set but not used, creating a warning in new versions of IASL. Since it's an optional argument, just remove it. dsdt.aml 22: if(CondRefOf(\_OSI,Local1)) Warning 3144 - ^ Method Local is set but never used (Local1) Change-Id: I07f49ac5a3708838d1c4a7216dfb11acc415c881 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12692 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-08lenovo/t500: Add clone of Lenovo T400Francis Rowe
The existing code for the Lenovo T400 works without changes on the Lenovo T500. Same HDA verbs are provided by Lenovo BIOS on both laptops. Change-Id: I300408a8a0ed00476aee6061925befc2822fb505 Signed-off-by: Francis Rowe <info@gluglug.org.uk> Reviewed-on: https://review.coreboot.org/10545 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-24lenovo t400: Fix IASL warning and remarkMartin Roth
If any path in a method returns a value, IASL expects that all paths within that method will return a value. Presumably, the ATPX would not need a return value if Arg0 is anything other than 0, so just return a zero. - Serialize ATPX method to make IASL happy. This means that it can only be used by one thread at a time. Fixes these issues: dsdt.aml 2581: Method (ATPX, 2, NotSerialized) { Remark 2120 - ^ Control Method should be made Serialized (due to creation of named objects within) dsdt.aml 2581: Method (ATPX, 2, NotSerialized) { Warning 3115 - ^ Not all control paths return a value (ATPX) Change-Id: I14aeab0cebe4596e06a17cffc36cc01b953d7191 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12518 Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-24ec/lenovo/h8: Fix IASL warningsMartin Roth
If any path in a method returns a value, IASL expects that all paths within that method will return a value. Presumably the MKHP method wouldn't get called unless there were a pending event, but if no event is found, return a zero. Fixes IASL warning: dsdt.aml 1785: Method (MHKP, 0, NotSerialized) Warning 3115 - ^ Not all control paths return a value (MHKP) This was the only IASL warning in most lenovo mainboards. Change-Id: Id93dcc4a74bd4c18b78f1dde821e7ba0f3444da3 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12517 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-23IASL: Enable warnings as errorsMartin Roth
We've actually got more warnings now than when I first tested IASL warnings as errors. Because of this, I'm adding it with the option to have it disabled, in hopes that things won't get any worse as we work on fixing the IASL warnings that are currently in the codebase. - Enable IASL warnings as errors - Disable warnings as errors in mainboards that currently have warnings. - Print a really obnoxious message on those platforms when they build. ***** WARNING: IASL warnings as errors is disabled! ***** ***** Please fix the ASL for this platform. ***** Change-Id: If0da0ac709bd8c0e8e2dbd3a498fe6ecb5500a81 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10663 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-19lenovo/r400: Add clone of Lenovo T400Michał Masłowski
The existing code for the Lenovo T400 works without changes on the Lenovo R400. Same HDA verbs are provided by Lenovo BIOS on both laptops. Change-Id: I1dadddd7250ab80a4c40c2435865d72e3e5d99c9 Signed-off-by: Michał Masłowski <mtjm@mtjm.eu> Signed-off-by: Francis Rowe <info@gluglug.org.uk> Reviewed-on: http://review.coreboot.org/8393 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2015-11-10mainboard/lenovo/t400: Add initial hybrid graphics supportTimothy Pearson
TEST: Booted T400 with Intel/ATI hybrid graphics in integrated mode with native Intel graphics init and verified integrated panel framebuffer functionality in SeaBIOS and Linux. Change-Id: I37e72c5dad0d7ab3915cc3d439ae9a4a9b3787e3 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/9319 Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2015-11-05intel/i945: Consolidate MADT handlingVladimir Serbinenko
Change-Id: Ic3cdfa6086a45aa231aa817d5ef6998823589818 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7108 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-05mainboard: Remove last_boot NVRAM optionTimothy Pearson
The last_boot NVRAM option was deprecated and removed in commit 3bfd7cc6. Remove the last_boot option from all affected mainboards to eliminate user confusion. Change-Id: I7e201b9cf21dfe5dda156785bad078524098626d Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12316 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins)
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-30AMD mainboards: Fix 64bit BiosCallOuts.cStefan Reinauer
Change-Id: I0f3297dff47dfb44da034ac6f305dcf1981b9de1 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/11080 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-23lenovo/t400: Consolidate `acpi/platform.asl`Paul Menzel
The ASL code is already present in `southbridge/intel/common/acpi/platform.asl` and `cpu/intel/common/acpi/cpu.asl`. So include these files instead of duplicating the code. Something similar was don in commit commit 24813c14 (i945: Consolidate acpi/platform.asl). Change-Id: Ide50b34184b80c86b996f86dd589c3cf3bf75587 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/11883 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-23lenovo/x200: Consolidate `acpi/platform.asl`Paul Menzel
The ASL code is already present in `southbridge/intel/common/acpi/platform.asl` and `cpu/intel/common/acpi/cpu.asl`. So include these files instead of duplicating the code. Something similar was don in commit commit 24813c14 (i945: Consolidate acpi/platform.asl). Change-Id: I1e69cf0fd73e70ed6656b9ed6f55aba4c56a6edd Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/11882 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-23southbridge/intel: Move `i82801gx/acpi/platform.asl` to `common/acpi`Paul Menzel
Commit 24813c14 (i945: Consolidate acpi/platform.asl) creates the file in the directory `src/southbridge/intel/i82801gx/acpi`. Devices with the southbridge `intel/i82801ix`, like the laptop Lenovo X200, use the exact same ASL code though. So share this in the directory `src/southbridge/intel/common/acpi`. Change-Id: I33b7993bcdbef7233ed85a683b2858ac72c1d642 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/11881 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-23cpu/intel: Move Power notification ASL code into `common/acpi`Paul Menzel
Commit 24813c14 (i945: Consolidate acpi/platform.asl) creates the file in the directory `src/cpu/intel/model_6dx/acpi`, although the devices can also use different Intel CPU models like, for example, `intel/model_6ex` on the Lenovo T60. Therefore move the file to the directory `src/cpu/intel/common/acpi` so that other devices, like Intel GM45 based devices, can also include it. Change-Id: I90126b66a4d70468923622a8e3aebadeafcbf96f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/11880 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-22gma ACPI: Make brightness levels a per board settingNico Huber
Those are actually board specific. Keep the old value as defaults, though. The defaults are included by all affected boards. Change-Id: Ib865c7b4274f2ea3181a89fc52701b740f9bab7d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/11705 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-10-11lenovo/t60: Enable native intel gfx init.Vladimir Serbinenko
Tested on T60 with intel graphics. Change-Id: Id74d0a1315749052e7313135242e6b64862aa5e1 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5345 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2015-10-11Kill lvds_num_lanesVladimir Serbinenko
Only one value would work with corresponding gma code currently (which one depends on board). Going forward, it's possible to compute which number can be used, so there is no need to keep this info around. Change-Id: Iadc77ef94b02f892860e3ae8d70a0a792758565d Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/11862 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2015-10-11Derive lvds_dual_channel from EDID timings.Vladimir Serbinenko
Based on the info by Felix Held. Change-Id: Iab84dd8a0e3c942da20a6e21db5510e4ad16cadd Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/11857 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2015-10-03sandybridge ivybridge: Treat native init as first class citizenAlexandru Gagniuc
This is a sad story. We have three different code paths for sandybridge and ivybridge: proper native path, google MRC path, and, everyone's favorite: Intel FSP path. For the purpose of this patch, the FSP path lives in its own little world, and doesn't concern us. Since MRC was first, when native files and variables were added, they were suffixed with "_native" to separate them from the existing code. This can cause confusion, as the suffix might make the native files seem parasitical. This has been bothering me for many months. MRC should be the parasitical path, especially since we fully support native init, and it works more reliably, on a wider range of hardware. There have been a few board ports that never made it to coreboot.org because MRC would hang. gigabyte/ga-b75m-d3h is a prime example: it did not work with MRC, so the effort was abandoned at first. Once the native path became available, the effort was restarted and the board is now supported. In honor of the hackers and pioneers who made the native code possible, rename things so that their effort is the first class citizen. Change-Id: Ic86cee5e00bf7f598716d3d15d1ea81ca673932f Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/11788 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
2015-09-24coreboot: move TS_END_ROMSTAGE to one spotAaron Durbin
While the romstage code flow is not consistent across all mainboards/chipsets there is only one way of running ramstage from romstage -- run_ramstage(). Move the timestamp_add_now(TS_END_ROMSTAGE) to be within run_ramstage(). BUG=chrome-os-partner:44827 BRANCH=None TEST=Built and booted glados. TS_END_ROMSTAGE still present in timestamp table. Change-Id: I4b584e274ce2107e83ca6425491fdc71a138e82c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11700 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-27lenovo/g505s: Add System Board ID to fix ACPI warningMartin Roth
Add the System Board Hardware ID to fix the warning: dsdt.aml 88: Device (MB) { Warning 3141 - ^ Missing dependency (Device object requires a _HID or _ADR in same scope) Change-Id: Ie97b1e6792c8d4c8db2500cef6a79881b7ff94c8 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10669 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-24Remove address from GPLv2 headersPatrick Georgi
Follow up for commit b890a12, some contributions brought back a number of FSF addresses, so get rid of them again. Change-Id: Icf83d5e2a3daea385af3572e9eac6b2431652c28 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10640 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-06-24sandy/ivy: Include IRQ routes from platformKyösti Mälkki
The default route does work for all Chromebooks and is replaced with platform-specific one in follow-up. Change-Id: Ia1839ed38dacf44a89dc757394d054e17666f193 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/10442 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-06-22lenovo/x60: Enable VESA framebuffer mode (native graphics)Francis Rowe
At present, no option exists for "Keep VESA framebuffer", which means that text-mode will be used. Add the appropriate Kconfig option. Change-Id: Iaed07eba6d9288c857f7e7a0b0be1107071e49e5 Signed-off-by: Francis Rowe <info@gluglug.org.uk> Reviewed-on: http://review.coreboot.org/10553 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <gaumless@gmail.com>
2015-06-22lenovo/x60: Enable brightness controls (native graphics)Francis Rowe
On i945 legacy brightness control is enabled by a single bit in BLC_PWM_CTL. It's bit 16 or bit 0 (the other one reverses polarity). Set the bit to enable brightness controls. Change-Id: Id855c4e91fe71fb489739e62fbe99ca22841acd2 Signed-off-by: Francis Rowe <info@gluglug.org.uk> Reviewed-on: http://review.coreboot.org/7048 Reviewed-by: Martin Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-06-14mainboard/lenovo/t400: Fix HDA verbs to match hardware layoutMichał Masłowski
The same values are used on my Lenovo R400 as reported by Francis Rowe from his T400 and T500. TEST: Read /proc/asound/card0/codec#0, see that the jack locations correspond to the board layout, e.g. headphone and microphone connectors are on front of the laptop, not right. Read /sys/class/sound/hwC0D0/init_pin_configs, see that it has the same content as with factory firmware. Change-Id: I60e914ca9fab4bb2c99b4ed9e6d81a0580a88b18 Signed-off-by: Michał Masłowski <mtjm@mtjm.eu> Reviewed-on: http://review.coreboot.org/10431 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-06-10mainboard/lenovo/t400: Add initial ATPX ACPI implementationTimothy Pearson
Change-Id: I9b86ebec59ccb63db0e1ba61533d162507a22379 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/9320 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2015-06-10lenovo/t400: Fix buildKyösti Mälkki
Change-Id: I8e8b6e7c123e641749c42a7c706176e285902bb5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/10502 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2015-06-10mainboards/lenovo/t400: Remove X200-specific codeTimothy Pearson
Change-Id: Ic3503938b996bbf31f1417923f019a7bc722b9fd Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/10429 Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Tested-by: build bot (Jenkins)
2015-06-10mainboards/lenovo: Copy X200 board to T400 for future expansionTimothy Pearson
Change-Id: If2d48b84fe7bd7b144e96171e54067891e3c4e2e Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/9316 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-10mainboard/lenovo/x200: Add power_on_after_fail NVRAM optionTimothy Pearson
Change-Id: I8e78cbae132566b6ca27e0a68af2656364c82b8f Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/9332 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-08Remove empty lines at end of fileElyes HAOUAS
Used command line to remove empty lines at end of file: find . -type f -exec sed -i -e :a -e '/^\n*$/{$d;N;};/\n$/ba' {} \; Change-Id: I816ac9666b6dbb7c7e47843672f0d5cc499766a3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: http://review.coreboot.org/10446 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-05device_ops: add device_t argument to acpi_fill_ssdt_generatorAlexander Couzens
`device_t device` is missing as argument. Every device_op function should have a `device_t device` argument. Change-Id: I7fca8c3fa15c1be672e50e4422d7ac8e4aaa1e36 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: http://review.coreboot.org/9598 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-05mainboard/lenovo/{t430s,t420s,t520,t530,x220}: Add TPM 1.2 mainboard supportPhilipp Deppenwiese
Every Lenovo Thinkpad includes a Trusted Platform Module, so we can enable it for the sandy-/ivybridge platforms. Change-Id: Icda443ba88c2a49a0033014ce7710dd607fa15dc Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: http://review.coreboot.org/10411 Tested-by: build bot (Jenkins) Reviewed-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-05-29bd82x6x: Move calling of finalize() on resume to southbridge codeVladimir Serbinenko
Change-Id: I6416cd5780fbda0b3c2e236ce98a9f9a508e70c6 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10293 Tested-by: build bot (Jenkins) Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
2015-05-29x230: Clean up smihandler.cVladimir Serbinenko
Remove dead code and dead includes. Change-Id: I5564ebfbbef6f65c275c2f94f75724f4e36472db Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10349 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2015-05-29lenovo: Move pc_keyboard_init to h8 init.Vladimir Serbinenko
PS/2 emulation is part of H8, so should be inited in relevant files. Change-Id: Ie873ea7f6f88f68f622351799462d0b000d17585 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10348 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2015-05-28x230: Fix headset microphone support.Vladimir Serbinenko
Previously only internal mic really worked but since it's of good quality it's not really noticeable. Change-Id: Ie14c377b0370302d97e1f89eae5787e05e73b7d2 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10286 Tested-by: build bot (Jenkins) Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
2015-05-28intel: Remove pstate_coord_type.Vladimir Serbinenko
Not used anywhere. Change-Id: I9bab092d285aaebdf9283ba08e23197f9785b3a6 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10329 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
2015-05-28igd.asl rewriteVladimir Serbinenko
Old igd.asl had inconsistent addresses (between _DOD and actual device) and ghost devices. Any of those is enough to make brightness on windows fail and make igd.asl out-of-ACPI-spec. Also old code favoured ridiculous copying of the same thing 6 times per chipset. Leave only hooking up and chipset-specific part in chipset directory. Move NVS handling and ACPI-spec parts to a common file. Change-Id: I556769e5e28b83e7465e3db689e26c8c0ab44757 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7472 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2015-05-27x201: Add TPM declaration.Vladimir Serbinenko
This allows to deactivate TPM on X201. Change-Id: Ic085db6cc2c57668e7a4fdbc7440735c806cc256 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10278 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
2015-05-27x230: Add TPM declaration.Vladimir Serbinenko
This allows to deactivate TPM on X230. Change-Id: I73d4272da62335ec3766ce4814d5b46538b190fe Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10273 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
2015-05-26gm45: Link cstates.c rather than including it.Vladimir Serbinenko
The comment about necessity of include isn't true anymore as get_cst_entries is not weak anymore so if it's not found, the linking would fail. Change-Id: I4bf88208d63ac3e625f464c3907e2e1ea575dd9f Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7375 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2015-05-26bd82x6x: Merge common platform ASL code.Vladimir Serbinenko
This code in reality just describes the southbridge features, don't put a copy in every mainboard. Change-Id: I8cf3019a36b1ae6a17d502e7508f36ea9fa62830 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10231 Reviewed-by: Nicolas Reinecke <nr@das-labor.org> Tested-by: build bot (Jenkins)
2015-05-24AGESA binaryPI boards: Drop annoying commentaryKyösti Mälkki
Same comments were already removed for the latest board, the amd/lamar. Change-Id: Ie244f838409c567c11f7444c9cf17de72e49dbb0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/10283 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2015-05-23AGESA fam15x fam16x: Remove HAVE_ACPI_RESUMEKyösti Mälkki
Implementation corrupts low-memory on S3 resume path, rendering OS unstable. AMD was never able to pinpoint a revision that did not have the issue. Change-Id: I9656ac1bfe1412775a6152b9f995c4d4ebf57159 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/10285 Reviewed-by: Rudolf Marek <r.marek@assembler.cz> Tested-by: build bot (Jenkins)
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>