summaryrefslogtreecommitdiff
path: root/src/mainboard/lenovo/x201
AgeCommit message (Collapse)Author
2014-03-04nehalem: Replace video init.Vladimir Serbinenko
Old video init just replayed the sequence. This one actually computes the values. Change-Id: Ic1fe7a2e90dc2cc36ac0d8bcea5cfabc583f09a3 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5270 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-03-03nehalem/raminit: Don't touch clock generator in raminit.Vladimir Serbinenko
Clock generator is mobo-specific. Don't touch it in raminit. Change-Id: Ie114696b7fb13b8daee8dd1393d43bc609e149b3 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5265 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-03-01lenovo/x201: Move mainboard init to mainboard_init.Vladimir Serbinenko
Rather than having it inside mainboard_enable. Change-Id: Ie8bd25eb49b919b4e25c4628e3557fc66b2ba4d9 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4840 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-02-20nehalem: Make SPD address map into parameter.Vladimir Serbinenko
It's mobo dependent. Change-Id: I7a9ba0fb7374a61178e9282acd8f10098435f1fd Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5253 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-02-17lenovo/x201: Fix wrong declaration in devicetree.cbVladimir Serbinenko
Change-Id: I90c6ff14ab819368ccc874008a7fb1410a543984 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5255 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-05lenovo/x201: Enable flash prefetching.Vladimir Serbinenko
Speeds up coreboot and especially payload load. Before: 90:load payload 4,530,979 (17,728) 99:selfboot jump 5,103,408 (572,429) After: 90:load payload 4,390,051 (14,849) 99:selfboot jump 4,505,966 (115,915) Change-Id: I45c3042594cda16ab3adde6472e00ec1b2d2a688 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5145 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-02-01lenovo/x201: Skip AT24RF08 detection.Vladimir Serbinenko
AT24RF08 was inherited from RE of original BIOS. As we don't really care if the chip in question is really AT24RF08 or a generic replacement, we can skip this check. Change-Id: I862dd66b2332314beb835f215f1c1cd838aa07b9 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4769 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-02-01lenovo: Handle EEPROM/RFID chip.Vladimir Serbinenko
EEPROM/RFID chip present in thinkpad should be locked in a way to avoid any potential RFID access. Read serial number, UUID and P/N from EEPROM. This info is stored on AT24RF08 chip acessible through SMBUS. Change-Id: Ia3e766d90a094f63c8c854cd37e165221ccd8acd Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4774 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2014-01-23X201: Enable expresscard hotplug.Vladimir Serbinenko
Change-Id: Ieefc2ad775c16de9aa974b2602d55ee047c9f568 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4643 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-01-23lenovo/x201: Reinit CBMEM only on S3 resume.Vladimir Serbinenko
Change-Id: I0643cdab10cda3f19ab56223f5fa77376a8046ac Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4782 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-01-23X201: Move early nehalem S3 magic to right place.Vladimir Serbinenko
This MCH magic needs to be done before GPIO. Now S3 (Suspend-to-RAM) works on X201. Change-Id: I319e57af52ff01083bfbffbcd883ac5f453320a1 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4632 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-01-23Ibexpeak: add missing thermal init.Vladimir Serbinenko
Without it ME doesn't always start correctly and no temperature is reported, no fan management and so on. Change-Id: Iff71f3afbc35a1453a20d182890ae2d196c556bd Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4636 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-01-23X201: Add missing LPC registersVladimir Serbinenko
Without them PMH7 is inaccessible from running system. Change-Id: Ib5a524325040e253a9d914906f90263fc208c313 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4655 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-01-23X201: Add missing CPU counter.Vladimir Serbinenko
Change-Id: If9f10ef40193fc84ab1849429b5af678ffe831b2 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4624 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-01-23X201: Add azalia verb.Vladimir Serbinenko
Adds missing sound codec configuration. Change-Id: I3a7097ab0a7c85524f2400471323f5d2d15569ed Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4641 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-01-22CBMEM: Replace cbmem_initialize() with cbmem_recovery()Kyösti Mälkki
The replacement function confirms CBMEM TOC is wiped clean on power cycles and resets. It also introduces compatibility interface to ease up transition to DYNAMIC_CBMEM. Change-Id: Ic5445c5bff4aff22a43821f3064f2df458b9f250 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4668 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2014-01-22lenovo/x201: Really do EARLY_CBMEM_INITKyösti Mälkki
The board was missing cbmem_initialize() call in romstage. Selecting EARLY_CBMEM_INIT implies this is done in romstage. Change-Id: I9ec93f89fe4cbb9e729532be36db601b6e62bca6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4667 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-01-20X201: Fix SMI bindings.Vladimir Serbinenko
Doesn't have a visible effect currently but it's better if those bindings are correct. Change-Id: I0f1a468e59429b14db139cc48e1e68c0e1841300 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4645 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-01-19board-status: Add board_info.txt extracted from wiki.Vladimir Serbinenko
board_info.txt is a file to be used by board-status to add some useful info to the generated table like flash chip type. This series is autogenerated from wiki page Supported_Motherboards. Change-Id: Ie2bda900713ef4883134477163320936c84c34f5 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4701 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-01-12ec/lenovo/h8: Make trackpoint enable a CMOS option.Vladimir Serbinenko
To be consistent with touchpad counterpart. Change-Id: I72d09b41b964f80a81fbf409ef69dd368834a3e2 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4654 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-01-12ec/lenovo/h8: Remove trackpoint_enable from device tree.Vladimir Serbinenko
Change-Id: I6652e0ad4e0179950f775bbd0200484907bfc976 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4653 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-01-12ec/lenovo/h8: make wlan config a CMOS optionVladimir Serbinenko
To stay in line with wwan and bluetooth. Change-Id: Iafe2dc97fc2aec5c2ad1834659b796a6b079c1bc Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4652 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-01-12ec/lenovo/h8: Allow control of low-battery beep.Vladimir Serbinenko
Change-Id: I2f422e83f2afcf0cc3f3ecbace01a8f4f39e87d4 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4663 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-01-12ec/lenovo/h8: Allow user to disable powermanagement beeps.Vladimir Serbinenko
They're pretty annoying. Change-Id: I44d26dc168927a9cedfd6ecc4c9a51a3a7b362c7 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4662 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-01-12ibexpeak / bd82x6x: Make SATA mode user-visible option.Vladimir Serbinenko
Ability to choose compatibility mode is interesting for testing payloads and OS for compatibility with older systems. As per comments "ide_legacy_combined # TODO: Does nothing since generations, remove from sb code?" The "combined" mode was removed. It wasn't used by any mobo and the code for it is almost identical to IDE one other than few bits relating to interrupt handling and ISA mode. Change-Id: I407a8fac753b513812a86bef5abcf39c6d81472e Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4658 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-01-12ec/lenovo/h8: Implement sticky Fn option.Vladimir Serbinenko
Useful for accessibility. Sticky modifier (sticky Fn) is a behaviour of modifier key when you don't have to hold it pressed to achieve the result. E.g. with normal Fn brightness up is: <Press Fn> <Press Home> <Despress Home> <Depress Fn> With sticky Fn you can do: <Press Fn> <Depress Fn> <Press Home> <Despress Home> Change-Id: I4da5adcea02428d936023891de08684cae77c44e Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4661 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-01-12ec/lenovo/h8: Add an option to swap ctrl and fn.Vladimir Serbinenko
Tested on my X201 and X230. Change-Id: I3c7ec65681157d15c6e87eea64779a08e03ae5a8 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4660 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-01-12ec/lenovo/h8: Remove wlan_enable and wwan_enable from device tree.Vladimir Serbinenko
wwan_enable was never used. wlan_enable isn't something for device tree but for CMOS config if at all. Change-Id: I765d9d6f0b73b7dc5a57c0c630a53b4b7a0b48cb Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4651 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-01-09X201: set default USB debug controller to 2.Vladimir Serbinenko
The other port is not easily accessible. Change-Id: I6ea31346a375debcd5fc1c27e4078e3a436715e3 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4635 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-01-09bd82x6x/ibexpeak: Make DRAM reset gate GPIO configurableVladimir Serbinenko
DRAM reset gate GPIO is different on different mobos move it to hidden config with 60 (current value) as default. Set it to 10 for Lenovo X201. Change-Id: I4f3b6876d7c33d4966315091b63a76a9a0064c16 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4622 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-01-04X201: Fix native video initVladimir Serbinenko
Due to recent restructuring X201 native video init has disappeared from config options. Put it back and fix compilation with it. Change-Id: I6d9ba5da196c093abd2df89a6fe5efefece1fb3c Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4606 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-12-15lenovo/x201: Add support for Lenovo X201 (Calpella-based laptop)Vladimir Serbinenko
Was extensively tested on my X201. More info on the wiki Change-Id: I503d77749780422e446b48224ca98a1f22a2c180 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4514 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 02:51:52 +0000